arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2
   3 /dts-v1/;
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/pinctrl/rockchip.h>
   7 #include <dt-bindings/soc/rockchip,vop2.h>
   8 #include "rk3566.dtsi"
   9
  10 / {
  11         model = "Pine64 RK3566 Quartz64-A Board";
  12         compatible = "pine64,quartz64-a", "rockchip,rk3566";
  13
  14         aliases {
  15                 ethernet0 = &gmac1;
  16                 mmc0 = &sdmmc0;
  17                 mmc1 = &sdhci;
  18         };
  19
  20         chosen: chosen {
  21                 stdout-path = "serial2:1500000n8";
  22         };
  23
  24         gmac1_clkin: external-gmac1-clock {
  25                 compatible = "fixed-clock";
  26                 clock-frequency = <125000000>;
  27                 clock-output-names = "gmac1_clkin";
  28                 #clock-cells = <0>;
  29         };
  30
  31         fan: gpio_fan {
  32                 compatible = "gpio-fan";
  33                 gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
  34                 gpio-fan,speed-map = <0    0
  35                                       4500 1>;
  36                 pinctrl-names = "default";
  37                 pinctrl-0 = <&fan_en_h>;
  38                 #cooling-cells = <2>;
  39         };
  40
  41         hdmi-con {
  42                 compatible = "hdmi-connector";
  43                 type = "a";
  44
  45                 port {
  46                         hdmi_con_in: endpoint {
  47                                 remote-endpoint = <&hdmi_out_con>;
  48                         };
  49                 };
  50         };
  51
  52         leds {
  53                 compatible = "gpio-leds";
  54
  55                 led-work {
  56                         label = "work-led";
  57                         default-state = "off";
  58                         gpios = <&gpio0 RK_PD3 GPIO_ACTIVE_HIGH>;
  59                         pinctrl-names = "default";
  60                         pinctrl-0 = <&work_led_enable_h>;
  61                         retain-state-suspended;
  62                 };
  63
  64                 led-diy {
  65                         label = "diy-led";
  66                         default-state = "on";
  67                         gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
  68                         linux,default-trigger = "heartbeat";
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&diy_led_enable_h>;
  71                         retain-state-suspended;
  72                 };
  73         };
  74
  75         rk817-sound {
  76                 compatible = "simple-audio-card";
  77                 simple-audio-card,format = "i2s";
  78                 simple-audio-card,name = "Analog RK817";
  79                 simple-audio-card,mclk-fs = <256>;
  80
  81                 simple-audio-card,cpu {
  82                         sound-dai = <&i2s1_8ch>;
  83                 };
  84
  85                 simple-audio-card,codec {
  86                         sound-dai = <&rk817>;
  87                 };
  88         };
  89
  90         sdio_pwrseq: sdio-pwrseq {
  91                 compatible = "mmc-pwrseq-simple";
  92                 clocks = <&rk817 1>;
  93                 clock-names = "ext_clock";
  94                 pinctrl-names = "default";
  95                 pinctrl-0 = <&wifi_enable_h>;
  96                 post-power-on-delay-ms = <100>;
  97                 power-off-delay-us = <5000000>;
  98                 reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>;
  99         };
 100
 101         spdif_dit: spdif-dit {
 102                 compatible = "linux,spdif-dit";
 103                 #sound-dai-cells = <0>;
 104         };
 105
 106         spdif_sound: spdif-sound {
 107                 compatible = "simple-audio-card";
 108                 simple-audio-card,name = "SPDIF";
 109
 110                 simple-audio-card,cpu {
 111                         sound-dai = <&spdif>;
 112                 };
 113
 114                 simple-audio-card,codec {
 115                         sound-dai = <&spdif_dit>;
 116                 };
 117         };
 118
 119         vcc12v_dcin: vcc12v_dcin {
 120                 compatible = "regulator-fixed";
 121                 regulator-name = "vcc12v_dcin";
 122                 regulator-always-on;
 123                 regulator-boot-on;
 124                 regulator-min-microvolt = <12000000>;
 125                 regulator-max-microvolt = <12000000>;
 126         };
 127
 128         /* vbus feeds the rk817 usb input.
 129          * With no battery attached, also feeds vcc_bat+
 130          * via ON/OFF_BAT jumper
 131          */
 132         vbus: vbus {
 133                 compatible = "regulator-fixed";
 134                 regulator-name = "vbus";
 135                 regulator-always-on;
 136                 regulator-boot-on;
 137                 regulator-min-microvolt = <5000000>;
 138                 regulator-max-microvolt = <5000000>;
 139                 vin-supply = <&vcc12v_dcin>;
 140         };
 141
 142         vcc3v3_pcie_p: vcc3v3-pcie-p-regulator {
 143                 compatible = "regulator-fixed";
 144                 enable-active-high;
 145                 gpio = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
 146                 pinctrl-names = "default";
 147                 pinctrl-0 = <&pcie_enable_h>;
 148                 regulator-name = "vcc3v3_pcie_p";
 149                 regulator-min-microvolt = <3300000>;
 150                 regulator-max-microvolt = <3300000>;
 151                 vin-supply = <&vcc_3v3>;
 152         };
 153
 154         vcc5v0_usb: vcc5v0_usb {
 155                 compatible = "regulator-fixed";
 156                 regulator-name = "vcc5v0_usb";
 157                 regulator-always-on;
 158                 regulator-boot-on;
 159                 regulator-min-microvolt = <5000000>;
 160                 regulator-max-microvolt = <5000000>;
 161                 vin-supply = <&vcc12v_dcin>;
 162         };
 163
 164         /* all four ports are controlled by one gpio
 165          * the host ports are sourced from vcc5v0_usb
 166          * the otg port is sourced from vcc5v0_midu
 167          */
 168         vcc5v0_usb20_host: vcc5v0_usb20_host {
 169                 compatible = "regulator-fixed";
 170                 enable-active-high;
 171                 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
 172                 pinctrl-names = "default";
 173                 pinctrl-0 = <&vcc5v0_usb20_host_en>;
 174                 regulator-name = "vcc5v0_usb20_host";
 175                 regulator-min-microvolt = <5000000>;
 176                 regulator-max-microvolt = <5000000>;
 177                 vin-supply = <&vcc5v0_usb>;
 178         };
 179
 180         vcc5v0_usb20_otg: vcc5v0_usb20_otg {
 181                 compatible = "regulator-fixed";
 182                 enable-active-high;
 183                 gpio = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
 184                 regulator-name = "vcc5v0_usb20_otg";
 185                 regulator-min-microvolt = <5000000>;
 186                 regulator-max-microvolt = <5000000>;
 187                 vin-supply = <&dcdc_boost>;
 188         };
 189
 190         vcc3v3_sd: vcc3v3_sd {
 191                 compatible = "regulator-fixed";
 192                 gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
 193                 pinctrl-names = "default";
 194                 pinctrl-0 = <&vcc_sd_h>;
 195                 regulator-boot-on;
 196                 regulator-name = "vcc3v3_sd";
 197                 regulator-min-microvolt = <3300000>;
 198                 regulator-max-microvolt = <3300000>;
 199                 vin-supply = <&vcc_3v3>;
 200         };
 201
 202         /* sourced from vbus and vcc_bat+ via rk817 sw5 */
 203         vcc_sys: vcc_sys {
 204                 compatible = "regulator-fixed";
 205                 regulator-name = "vcc_sys";
 206                 regulator-always-on;
 207                 regulator-boot-on;
 208                 regulator-min-microvolt = <4400000>;
 209                 regulator-max-microvolt = <4400000>;
 210                 vin-supply = <&vbus>;
 211         };
 212
 213         /* sourced from vcc_sys, sdio module operates internally at 3.3v */
 214         vcc_wl: vcc_wl {
 215                 compatible = "regulator-fixed";
 216                 regulator-name = "vcc_wl";
 217                 regulator-always-on;
 218                 regulator-boot-on;
 219                 regulator-min-microvolt = <3300000>;
 220                 regulator-max-microvolt = <3300000>;
 221                 vin-supply = <&vcc_sys>;
 222         };
 223 };
 224
 225 &combphy1 {
 226         status = "okay";
 227 };
 228
 229 &combphy2 {
 230         status = "okay";
 231 };
 232
 233 &cpu0 {
 234         cpu-supply = <&vdd_cpu>;
 235 };
 236
 237 &cpu1 {
 238         cpu-supply = <&vdd_cpu>;
 239 };
 240
 241 &cpu2 {
 242         cpu-supply = <&vdd_cpu>;
 243 };
 244
 245 &cpu3 {
 246         cpu-supply = <&vdd_cpu>;
 247 };
 248
 249 &cpu_thermal {
 250         trips {
 251                 cpu_hot: cpu_hot {
 252                         temperature = <55000>;
 253                         hysteresis = <2000>;
 254                         type = "active";
 255                 };
 256         };
 257
 258         cooling-maps {
 259                 map1 {
 260                         trip = <&cpu_hot>;
 261                         cooling-device = <&fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 262                 };
 263         };
 264 };
 265
 266 &gmac1 {
 267         assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>;
 268         assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>;
 269         clock_in_out = "input";
 270         phy-supply = <&vcc_3v3>;
 271         phy-mode = "rgmii";
 272         pinctrl-names = "default";
 273         pinctrl-0 = <&gmac1m0_miim
 274                      &gmac1m0_tx_bus2
 275                      &gmac1m0_rx_bus2
 276                      &gmac1m0_rgmii_clk
 277                      &gmac1m0_clkinout
 278                      &gmac1m0_rgmii_bus>;
 279         snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
 280         snps,reset-active-low;
 281         /* Reset time is 20ms, 100ms for rtl8211f */
 282         snps,reset-delays-us = <0 20000 100000>;
 283         tx_delay = <0x30>;
 284         rx_delay = <0x10>;
 285         phy-handle = <&rgmii_phy1>;
 286         status = "okay";
 287 };
 288
 289 &gpu {
 290         mali-supply = <&vdd_gpu>;
 291         status = "okay";
 292 };
 293
 294 &hdmi {
 295         avdd-0v9-supply = <&vdda_0v9>;
 296         avdd-1v8-supply = <&vcc_1v8>;
 297         status = "okay";
 298 };
 299
 300 &hdmi_in {
 301         hdmi_in_vp0: endpoint {
 302                 remote-endpoint = <&vp0_out_hdmi>;
 303         };
 304 };
 305
 306 &hdmi_out {
 307         hdmi_out_con: endpoint {
 308                 remote-endpoint = <&hdmi_con_in>;
 309         };
 310 };
 311
 312 &hdmi_sound {
 313         status = "okay";
 314 };
 315
 316 &i2c0 {
 317         status = "okay";
 318
 319         vdd_cpu: regulator@1c {
 320                 compatible = "tcs,tcs4525";
 321                 reg = <0x1c>;
 322                 fcs,suspend-voltage-selector = <1>;
 323                 regulator-name = "vdd_cpu";
 324                 regulator-min-microvolt = <800000>;
 325                 regulator-max-microvolt = <1150000>;
 326                 regulator-ramp-delay = <2300>;
 327                 regulator-always-on;
 328                 regulator-boot-on;
 329                 vin-supply = <&vcc_sys>;
 330
 331                 regulator-state-mem {
 332                         regulator-off-in-suspend;
 333                 };
 334         };
 335
 336         rk817: pmic@20 {
 337                 compatible = "rockchip,rk817";
 338                 reg = <0x20>;
 339                 interrupt-parent = <&gpio0>;
 340                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
 341                 assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
 342                 assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
 343                 clock-names = "mclk";
 344                 clocks = <&cru I2S1_MCLKOUT_TX>;
 345                 clock-output-names = "rk808-clkout1", "rk808-clkout2";
 346                 #clock-cells = <1>;
 347                 pinctrl-names = "default";
 348                 pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
 349                 rockchip,system-power-controller;
 350                 #sound-dai-cells = <0>;
 351                 wakeup-source;
 352
 353                 vcc1-supply = <&vcc_sys>;
 354                 vcc2-supply = <&vcc_sys>;
 355                 vcc3-supply = <&vcc_sys>;
 356                 vcc4-supply = <&vcc_sys>;
 357                 vcc5-supply = <&vcc_sys>;
 358                 vcc6-supply = <&vcc_sys>;
 359                 vcc7-supply = <&vcc_sys>;
 360                 vcc8-supply = <&vcc_sys>;
 361                 vcc9-supply = <&dcdc_boost>;
 362
 363                 regulators {
 364                         vdd_logic: DCDC_REG1 {
 365                                 regulator-always-on;
 366                                 regulator-boot-on;
 367                                 regulator-min-microvolt = <500000>;
 368                                 regulator-max-microvolt = <1350000>;
 369                                 regulator-init-microvolt = <900000>;
 370                                 regulator-ramp-delay = <6001>;
 371                                 regulator-initial-mode = <0x2>;
 372                                 regulator-name = "vdd_logic";
 373                                 regulator-state-mem {
 374                                         regulator-on-in-suspend;
 375                                         regulator-suspend-microvolt = <900000>;
 376                                 };
 377                         };
 378
 379                         vdd_gpu: DCDC_REG2 {
 380                                 regulator-always-on;
 381                                 regulator-boot-on;
 382                                 regulator-min-microvolt = <500000>;
 383                                 regulator-max-microvolt = <1350000>;
 384                                 regulator-init-microvolt = <900000>;
 385                                 regulator-ramp-delay = <6001>;
 386                                 regulator-initial-mode = <0x2>;
 387                                 regulator-name = "vdd_gpu";
 388                                         regulator-state-mem {
 389                                         regulator-off-in-suspend;
 390                                 };
 391                         };
 392
 393                         vcc_ddr: DCDC_REG3 {
 394                                 regulator-always-on;
 395                                 regulator-boot-on;
 396                                 regulator-initial-mode = <0x2>;
 397                                 regulator-name = "vcc_ddr";
 398                                 regulator-state-mem {
 399                                         regulator-on-in-suspend;
 400                                 };
 401                         };
 402
 403                         vcc_3v3: DCDC_REG4 {
 404                                 regulator-always-on;
 405                                 regulator-boot-on;
 406                                 regulator-min-microvolt = <3300000>;
 407                                 regulator-max-microvolt = <3300000>;
 408                                 regulator-initial-mode = <0x2>;
 409                                 regulator-name = "vcc_3v3";
 410                                 regulator-state-mem {
 411                                         regulator-off-in-suspend;
 412                                 };
 413                         };
 414
 415                         vcca1v8_pmu: LDO_REG1 {
 416                                 regulator-always-on;
 417                                 regulator-boot-on;
 418                                 regulator-min-microvolt = <1800000>;
 419                                 regulator-max-microvolt = <1800000>;
 420                                 regulator-name = "vcca1v8_pmu";
 421                                 regulator-state-mem {
 422                                         regulator-on-in-suspend;
 423                                         regulator-suspend-microvolt = <1800000>;
 424                                 };
 425                         };
 426
 427                         vdda_0v9: LDO_REG2 {
 428                                 regulator-always-on;
 429                                 regulator-boot-on;
 430                                 regulator-min-microvolt = <900000>;
 431                                 regulator-max-microvolt = <900000>;
 432                                 regulator-name = "vdda_0v9";
 433                                 regulator-state-mem {
 434                                         regulator-off-in-suspend;
 435                                 };
 436                         };
 437
 438                         vdda0v9_pmu: LDO_REG3 {
 439                                 regulator-always-on;
 440                                 regulator-boot-on;
 441                                 regulator-min-microvolt = <900000>;
 442                                 regulator-max-microvolt = <900000>;
 443                                 regulator-name = "vdda0v9_pmu";
 444                                 regulator-state-mem {
 445                                         regulator-on-in-suspend;
 446                                         regulator-suspend-microvolt = <900000>;
 447                                 };
 448                         };
 449
 450                         vccio_acodec: LDO_REG4 {
 451                                 regulator-always-on;
 452                                 regulator-boot-on;
 453                                 regulator-min-microvolt = <3300000>;
 454                                 regulator-max-microvolt = <3300000>;
 455                                 regulator-name = "vccio_acodec";
 456                                 regulator-state-mem {
 457                                         regulator-off-in-suspend;
 458                                 };
 459                         };
 460
 461                         vccio_sd: LDO_REG5 {
 462                                 regulator-always-on;
 463                                 regulator-boot-on;
 464                                 regulator-min-microvolt = <1800000>;
 465                                 regulator-max-microvolt = <3300000>;
 466                                 regulator-name = "vccio_sd";
 467                                 regulator-state-mem {
 468                                         regulator-off-in-suspend;
 469                                 };
 470                         };
 471
 472                         vcc3v3_pmu: LDO_REG6 {
 473                                 regulator-always-on;
 474                                 regulator-boot-on;
 475                                 regulator-min-microvolt = <3300000>;
 476                                 regulator-max-microvolt = <3300000>;
 477                                 regulator-name = "vcc3v3_pmu";
 478                                 regulator-state-mem {
 479                                         regulator-on-in-suspend;
 480                                         regulator-suspend-microvolt = <3300000>;
 481                                 };
 482                         };
 483
 484                         vcc_1v8: LDO_REG7 {
 485                                 regulator-always-on;
 486                                 regulator-boot-on;
 487                                 regulator-min-microvolt = <1800000>;
 488                                 regulator-max-microvolt = <1800000>;
 489                                 regulator-name = "vcc_1v8";
 490                                 regulator-state-mem {
 491                                         regulator-off-in-suspend;
 492                                 };
 493                         };
 494
 495                         vcc1v8_dvp: LDO_REG8 {
 496                                 regulator-always-on;
 497                                 regulator-boot-on;
 498                                 regulator-min-microvolt = <1800000>;
 499                                 regulator-max-microvolt = <1800000>;
 500                                 regulator-name = "vcc1v8_dvp";
 501                                 regulator-state-mem {
 502                                         regulator-off-in-suspend;
 503                                 };
 504                         };
 505
 506                         vcc2v8_dvp: LDO_REG9 {
 507                                 regulator-always-on;
 508                                 regulator-boot-on;
 509                                 regulator-min-microvolt = <2800000>;
 510                                 regulator-max-microvolt = <2800000>;
 511                                 regulator-name = "vcc2v8_dvp";
 512                                 regulator-state-mem {
 513                                         regulator-off-in-suspend;
 514                                 };
 515                         };
 516
 517                         dcdc_boost: BOOST {
 518                                 regulator-always-on;
 519                                 regulator-boot-on;
 520                                 regulator-min-microvolt = <5000000>;
 521                                 regulator-max-microvolt = <5000000>;
 522                                 regulator-name = "boost";
 523                                 regulator-state-mem {
 524                                         regulator-off-in-suspend;
 525                                 };
 526                         };
 527
 528                         otg_switch: OTG_SWITCH {
 529                                 regulator-name = "otg_switch";
 530                                 regulator-state-mem {
 531                                         regulator-off-in-suspend;
 532                                 };
 533                         };
 534                 };
 535         };
 536 };
 537
 538 /* i2c3 is exposed on con40
 539  * pin 3 - i2c3_sda_m0, pullup to vcc_3v3
 540  * pin 5 - i2c3_scl_m0, pullup to vcc_3v3
 541  */
 542 &i2c3 {
 543         status = "okay";
 544 };
 545
 546 &i2s0_8ch {
 547         status = "okay";
 548 };
 549
 550 &i2s1_8ch {
 551         pinctrl-names = "default";
 552         pinctrl-0 = <&i2s1m0_sclktx
 553                      &i2s1m0_lrcktx
 554                      &i2s1m0_sdi0
 555                      &i2s1m0_sdo0>;
 556         rockchip,trcm-sync-tx-only;
 557         status = "okay";
 558 };
 559
 560 &mdio1 {
 561         rgmii_phy1: ethernet-phy@0 {
 562                 compatible = "ethernet-phy-ieee802.3-c22";
 563                 reg = <0>;
 564         };
 565 };
 566
 567 &pcie2x1 {
 568         pinctrl-names = "default";
 569         pinctrl-0 = <&pcie_reset_h>;
 570         reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
 571         vpcie3v3-supply = <&vcc3v3_pcie_p>;
 572         status = "okay";
 573 };
 574
 575 &pinctrl {
 576         bt {
 577                 bt_enable_h: bt-enable-h {
 578                         rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
 579                 };
 580
 581                 bt_host_wake_l: bt-host-wake-l {
 582                         rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>;
 583                 };
 584
 585                 bt_wake_l: bt-wake-l {
 586                         rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
 587                 };
 588         };
 589
 590         fan {
 591                 fan_en_h: fan-en-h {
 592                         rockchip,pins = <0 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 593                 };
 594         };
 595
 596         leds {
 597                 work_led_enable_h: work-led-enable-h {
 598                         rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 599                 };
 600
 601                 diy_led_enable_h: diy-led-enable-h {
 602                         rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 603                 };
 604         };
 605
 606         pcie {
 607                 pcie_enable_h: pcie-enable-h {
 608                         rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
 609                 };
 610
 611                 pcie_reset_h: pcie-reset-h {
 612                         rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 613                 };
 614         };
 615
 616         pmic {
 617                 pmic_int_l: pmic-int-l {
 618                         rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 619                 };
 620         };
 621
 622         usb2 {
 623                 vcc5v0_usb20_host_en: vcc5v0-usb20-host-en {
 624                         rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
 625                 };
 626         };
 627
 628         sdio-pwrseq {
 629                 wifi_enable_h: wifi-enable-h {
 630                         rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
 631                 };
 632         };
 633
 634         vcc_sd {
 635                 vcc_sd_h: vcc-sd-h {
 636                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
 637                 };
 638         };
 639 };
 640
 641 &pmu_io_domains {
 642         pmuio1-supply = <&vcc3v3_pmu>;
 643         pmuio2-supply = <&vcc3v3_pmu>;
 644         vccio1-supply = <&vccio_acodec>;
 645         vccio2-supply = <&vcc_1v8>;
 646         vccio3-supply = <&vccio_sd>;
 647         vccio4-supply = <&vcc_1v8>;
 648         vccio5-supply = <&vcc_3v3>;
 649         vccio6-supply = <&vcc1v8_dvp>;
 650         vccio7-supply = <&vcc_3v3>;
 651         status = "okay";
 652 };
 653
 654 &sdhci {
 655         bus-width = <8>;
 656         mmc-hs200-1_8v;
 657         non-removable;
 658         vmmc-supply = <&vcc_3v3>;
 659         vqmmc-supply = <&vcc_1v8>;
 660         status = "okay";
 661 };
 662
 663 &sdmmc0 {
 664         bus-width = <4>;
 665         cap-sd-highspeed;
 666         cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 667         disable-wp;
 668         pinctrl-names = "default";
 669         pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
 670         sd-uhs-sdr104;
 671         vmmc-supply = <&vcc3v3_sd>;
 672         vqmmc-supply = <&vccio_sd>;
 673         status = "okay";
 674 };
 675
 676 &sdmmc1 {
 677         bus-width = <4>;
 678         cap-sd-highspeed;
 679         cap-sdio-irq;
 680         keep-power-in-suspend;
 681         mmc-pwrseq = <&sdio_pwrseq>;
 682         non-removable;
 683         pinctrl-names = "default";
 684         pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>;
 685         sd-uhs-sdr104;
 686         vmmc-supply = <&vcc_wl>;
 687         vqmmc-supply = <&vcc_1v8>;
 688         status = "okay";
 689 };
 690
 691 &sfc {
 692         pinctrl-0 = <&fspi_pins>;
 693         pinctrl-names = "default";
 694         #address-cells = <1>;
 695         #size-cells = <0>;
 696         status = "disabled";
 697
 698         flash@0 {
 699                 compatible = "jedec,spi-nor";
 700                 reg = <0>;
 701                 spi-max-frequency = <24000000>;
 702                 spi-rx-bus-width = <4>;
 703                 spi-tx-bus-width = <1>;
 704         };
 705 };
 706
 707 /* spdif is exposed on con40 pin 18 */
 708 &spdif {
 709         status = "okay";
 710 };
 711
 712 /* spi1 is exposed on con40
 713  * pin 11 - spi1_mosi_m1
 714  * pin 13 - spi1_miso_m1
 715  * pin 15 - spi1_clk_m1
 716  * pin 17 - spi1_cs0_m1
 717  */
 718 &spi1 {
 719         pinctrl-names = "default";
 720         pinctrl-0 = <&spi1m1_cs0 &spi1m1_pins>;
 721 };
 722
 723 &tsadc {
 724         /* tshut mode 0:CRU 1:GPIO */
 725         rockchip,hw-tshut-mode = <1>;
 726         /* tshut polarity 0:LOW 1:HIGH */
 727         rockchip,hw-tshut-polarity = <0>;
 728         status = "okay";
 729 };
 730
 731 /* uart0 is exposed on con40
 732  * pin 12 - uart0_tx
 733  * pin 14 - uart0_rx
 734  */
 735 &uart0 {
 736         pinctrl-names = "default";
 737         pinctrl-0 = <&uart0_xfer>;
 738         status = "okay";
 739 };
 740
 741 &uart1 {
 742         pinctrl-names = "default";
 743         pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>;
 744         status = "okay";
 745         uart-has-rtscts;
 746
 747         bluetooth {
 748                 compatible = "brcm,bcm43438-bt";
 749                 clocks = <&rk817 1>;
 750                 clock-names = "lpo";
 751                 host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
 752                 device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 753                 shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 754                 pinctrl-names = "default";
 755                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 756                 vbat-supply = <&vcc_sys>;
 757                 vddio-supply = <&vcca1v8_pmu>;
 758                 max-speed = <3000000>;
 759         };
 760 };
 761
 762 /* uart2 is exposed on con40
 763  * pin 8 - uart2_tx_m0_debug
 764  * pin 10 - uart2_rx_m0_debug
 765  */
 766 &uart2 {
 767         status = "okay";
 768 };
 769
 770 &usb_host0_ehci {
 771         status = "okay";
 772 };
 773
 774 &usb_host0_ohci {
 775         status = "okay";
 776 };
 777
 778 &usb_host1_ehci {
 779         status = "okay";
 780 };
 781
 782 &usb_host1_ohci {
 783         status = "okay";
 784 };
 785
 786 &usb_host0_xhci {
 787         dr_mode = "host";
 788         status = "okay";
 789 };
 790
 791 /* usb3 controller is muxed with sata1 */
 792 &usb_host1_xhci {
 793         status = "okay";
 794 };
 795
 796 &usb2phy0 {
 797         status = "okay";
 798 };
 799
 800 &usb2phy0_host {
 801         phy-supply = <&vcc5v0_usb20_host>;
 802         status = "okay";
 803 };
 804
 805 &usb2phy0_otg {
 806         phy-supply = <&vcc5v0_usb20_otg>;
 807         status = "okay";
 808 };
 809
 810 &usb2phy1 {
 811         status = "okay";
 812 };
 813
 814 &usb2phy1_host {
 815         phy-supply = <&vcc5v0_usb20_host>;
 816         status = "okay";
 817 };
 818
 819 &usb2phy1_otg {
 820         phy-supply = <&vcc5v0_usb20_host>;
 821         status = "okay";
 822 };
 823
 824 &vop {
 825         assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
 826         assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
 827         status = "okay";
 828 };
 829
 830 &vop_mmu {
 831         status = "okay";
 832 };
 833
 834 &vp0 {
 835         vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
 836                 reg = <ROCKCHIP_VOP2_EP_HDMI0>;
 837                 remote-endpoint = <&hdmi_in_vp0>;
 838         };
 839 };