arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
   4  * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
   5  */
   6
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/pwm/pwm.h>
   9 #include "rk3399.dtsi"
  10 #include "rk3399-opp.dtsi"
  11
  12 / {
  13         aliases {
  14                 mmc0 = &sdio0;
  15                 mmc1 = &sdmmc;
  16                 mmc2 = &sdhci;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial2:1500000n8";
  21         };
  22
  23         /* enable for panel backlight support */
  24         backlight: backlight {
  25                 compatible = "pwm-backlight";
  26                 brightness-levels = <0 4 8 16 32 64 128 255>;
  27                 default-brightness-level = <5>;
  28                 pwms = <&pwm0 0 1000000 0>;
  29                 status = "disabled";
  30         };
  31
  32         clkin_gmac: external-gmac-clock {
  33                 compatible = "fixed-clock";
  34                 clock-frequency = <125000000>;
  35                 clock-output-names = "clkin_gmac";
  36                 #clock-cells = <0>;
  37         };
  38
  39         gpio-keys {
  40                 compatible = "gpio-keys";
  41                 autorepeat;
  42                 pinctrl-names = "default";
  43                 pinctrl-0 = <&pwrbtn>;
  44
  45                 key-power {
  46                         debounce-interval = <100>;
  47                         gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
  48                         label = "GPIO Key Power";
  49                         linux,code = <KEY_POWER>;
  50                         wakeup-source;
  51                 };
  52         };
  53
  54         ir-receiver {
  55                 compatible = "gpio-ir-receiver";
  56                 gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
  57                 pinctrl-0 = <&ir_int>;
  58                 pinctrl-names = "default";
  59         };
  60
  61         leds {
  62                 compatible = "gpio-leds";
  63                 pinctrl-names = "default";
  64                 pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
  65
  66                 work_led: led-0 {
  67                         label = "work";
  68                         default-state = "on";
  69                         gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
  70                 };
  71
  72                 diy_led: led-1 {
  73                         label = "diy";
  74                         default-state = "off";
  75                         gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
  76                 };
  77         };
  78
  79         fan: pwm-fan {
  80                 compatible = "pwm-fan";
  81                 cooling-levels = <0 100 150 200 255>;
  82                 #cooling-cells = <2>;
  83                 fan-supply = <&vcc12v_dcin>;
  84                 pwms = <&pwm1 0 50000 0>;
  85         };
  86
  87         sdio_pwrseq: sdio-pwrseq {
  88                 compatible = "mmc-pwrseq-simple";
  89                 clocks = <&rk808 1>;
  90                 clock-names = "ext_clock";
  91                 pinctrl-names = "default";
  92                 pinctrl-0 = <&wifi_enable_h>;
  93                 reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
  94         };
  95
  96         sound {
  97                 compatible = "audio-graph-card";
  98                 label = "Analog";
  99                 dais = <&i2s1_p0>;
 100         };
 101
 102         sound-dit {
 103                 compatible = "audio-graph-card";
 104                 label = "SPDIF";
 105                 dais = <&spdif_p0>;
 106         };
 107
 108         spdif-dit {
 109                 compatible = "linux,spdif-dit";
 110                 #sound-dai-cells = <0>;
 111
 112                 port {
 113                         dit_p0_0: endpoint {
 114                                 remote-endpoint = <&spdif_p0_0>;
 115                         };
 116                 };
 117         };
 118
 119         avdd: avdd-regulator {
 120                 compatible = "regulator-fixed";
 121                 regulator-name = "avdd";
 122                 regulator-min-microvolt = <11000000>;
 123                 regulator-max-microvolt = <11000000>;
 124                 vin-supply = <&vcc3v3_s0>;
 125         };
 126
 127         vcc12v_dcin: vcc12v-dcin {
 128                 compatible = "regulator-fixed";
 129                 regulator-name = "vcc12v_dcin";
 130                 regulator-always-on;
 131                 regulator-boot-on;
 132                 regulator-min-microvolt = <12000000>;
 133                 regulator-max-microvolt = <12000000>;
 134         };
 135
 136         /* switched by pmic_sleep */
 137         vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
 138                 compatible = "regulator-fixed";
 139                 regulator-name = "vcc1v8_s3";
 140                 regulator-always-on;
 141                 regulator-boot-on;
 142                 regulator-min-microvolt = <1800000>;
 143                 regulator-max-microvolt = <1800000>;
 144                 vin-supply = <&vcc_1v8>;
 145         };
 146
 147         /* micro SD card power */
 148         vcc3v0_sd: vcc3v0-sd {
 149                 compatible = "regulator-fixed";
 150                 enable-active-high;
 151                 gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
 152                 pinctrl-names = "default";
 153                 pinctrl-0 = <&sdmmc0_pwr_h>;
 154                 regulator-name = "vcc3v0_sd";
 155                 regulator-always-on;
 156                 regulator-min-microvolt = <3000000>;
 157                 regulator-max-microvolt = <3000000>;
 158                 vin-supply = <&vcc3v3_sys>;
 159
 160                 regulator-state-mem {
 161                         regulator-off-in-suspend;
 162                 };
 163         };
 164
 165         vcc3v3_pcie: vcc3v3-pcie-regulator {
 166                 compatible = "regulator-fixed";
 167                 enable-active-high;
 168                 gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 169                 pinctrl-names = "default";
 170                 pinctrl-0 = <&pcie_pwr_en>;
 171                 regulator-name = "vcc3v3_pcie";
 172                 regulator-always-on;
 173                 regulator-boot-on;
 174                 vin-supply = <&vcc12v_dcin>;
 175         };
 176
 177         vcc3v3_sys: vcc3v3-sys {
 178                 compatible = "regulator-fixed";
 179                 regulator-name = "vcc3v3_sys";
 180                 regulator-always-on;
 181                 regulator-boot-on;
 182                 regulator-min-microvolt = <3300000>;
 183                 regulator-max-microvolt = <3300000>;
 184                 vin-supply = <&vcc5v0_sys>;
 185         };
 186
 187         /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
 188         vcc5v0_host: vcc5v0-host-regulator {
 189                 compatible = "regulator-fixed";
 190                 enable-active-high;
 191                 gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
 192                 pinctrl-names = "default";
 193                 pinctrl-0 = <&vcc5v0_host_en>;
 194                 regulator-name = "vcc5v0_host";
 195                 regulator-always-on;
 196                 vin-supply = <&vcc5v0_usb>;
 197         };
 198
 199         vcc5v0_typec: vcc5v0-typec-regulator {
 200                 compatible = "regulator-fixed";
 201                 enable-active-high;
 202                 gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
 203                 pinctrl-names = "default";
 204                 pinctrl-0 = <&vcc5v0_typec_en>;
 205                 regulator-name = "vcc5v0_typec";
 206                 regulator-always-on;
 207                 vin-supply = <&vcc5v0_usb>;
 208         };
 209
 210         vcc5v0_sys: vcc5v0-sys {
 211                 compatible = "regulator-fixed";
 212                 regulator-name = "vcc5v0_sys";
 213                 regulator-always-on;
 214                 regulator-boot-on;
 215                 regulator-min-microvolt = <5000000>;
 216                 regulator-max-microvolt = <5000000>;
 217                 vin-supply = <&vcc12v_dcin>;
 218         };
 219
 220         vcc5v0_usb: vcc5v0-usb {
 221                 compatible = "regulator-fixed";
 222                 regulator-name = "vcc5v0_usb";
 223                 regulator-always-on;
 224                 regulator-boot-on;
 225                 regulator-min-microvolt = <5000000>;
 226                 regulator-max-microvolt = <5000000>;
 227                 vin-supply = <&vcc12v_dcin>;
 228         };
 229
 230         vdd_log: vdd-log {
 231                 compatible = "pwm-regulator";
 232                 pwms = <&pwm2 0 25000 1>;
 233                 pwm-supply = <&vcc5v0_sys>;
 234                 regulator-name = "vdd_log";
 235                 regulator-always-on;
 236                 regulator-boot-on;
 237                 regulator-min-microvolt = <800000>;
 238                 regulator-max-microvolt = <1700000>;
 239         };
 240 };
 241
 242 &cpu_l0 {
 243         cpu-supply = <&vdd_cpu_l>;
 244 };
 245
 246 &cpu_l1 {
 247         cpu-supply = <&vdd_cpu_l>;
 248 };
 249
 250 &cpu_l2 {
 251         cpu-supply = <&vdd_cpu_l>;
 252 };
 253
 254 &cpu_l3 {
 255         cpu-supply = <&vdd_cpu_l>;
 256 };
 257
 258 &cpu_b0 {
 259         cpu-supply = <&vdd_cpu_b>;
 260 };
 261
 262 &cpu_b1 {
 263         cpu-supply = <&vdd_cpu_b>;
 264 };
 265
 266 &cpu_thermal {
 267         trips {
 268                 cpu_warm: cpu_warm {
 269                         temperature = <55000>;
 270                         hysteresis = <2000>;
 271                         type = "active";
 272                 };
 273
 274                 cpu_hot: cpu_hot {
 275                         temperature = <65000>;
 276                         hysteresis = <2000>;
 277                         type = "active";
 278                 };
 279         };
 280
 281         cooling-maps {
 282                 map2 {
 283                         trip = <&cpu_warm>;
 284                         cooling-device = <&fan THERMAL_NO_LIMIT 1>;
 285                 };
 286
 287                 map3 {
 288                         trip = <&cpu_hot>;
 289                         cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
 290                 };
 291         };
 292 };
 293
 294 &emmc_phy {
 295         status = "okay";
 296 };
 297
 298 &gmac {
 299         assigned-clocks = <&cru SCLK_RMII_SRC>;
 300         assigned-clock-parents = <&clkin_gmac>;
 301         clock_in_out = "input";
 302         phy-supply = <&vcc_lan>;
 303         phy-mode = "rgmii";
 304         pinctrl-names = "default";
 305         pinctrl-0 = <&rgmii_pins>;
 306         snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
 307         snps,reset-active-low;
 308         snps,reset-delays-us = <0 10000 50000>;
 309         tx_delay = <0x28>;
 310         rx_delay = <0x11>;
 311         status = "okay";
 312 };
 313
 314 &hdmi {
 315         ddc-i2c-bus = <&i2c3>;
 316         pinctrl-names = "default";
 317         pinctrl-0 = <&hdmi_cec>;
 318         status = "okay";
 319 };
 320
 321 &hdmi_sound {
 322         status = "okay";
 323 };
 324
 325 &gpu {
 326         mali-supply = <&vdd_gpu>;
 327         status = "okay";
 328 };
 329
 330 &i2c0 {
 331         clock-frequency = <400000>;
 332         i2c-scl-rising-time-ns = <168>;
 333         i2c-scl-falling-time-ns = <4>;
 334         status = "okay";
 335
 336         rk808: pmic@1b {
 337                 compatible = "rockchip,rk808";
 338                 reg = <0x1b>;
 339                 interrupt-parent = <&gpio3>;
 340                 interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
 341                 #clock-cells = <1>;
 342                 clock-output-names = "xin32k", "rk808-clkout2";
 343                 pinctrl-names = "default";
 344                 pinctrl-0 = <&pmic_int_l>;
 345                 rockchip,system-power-controller;
 346                 wakeup-source;
 347
 348                 vcc1-supply = <&vcc5v0_sys>;
 349                 vcc2-supply = <&vcc5v0_sys>;
 350                 vcc3-supply = <&vcc5v0_sys>;
 351                 vcc4-supply = <&vcc5v0_sys>;
 352                 vcc6-supply = <&vcc5v0_sys>;
 353                 vcc7-supply = <&vcc5v0_sys>;
 354                 vcc8-supply = <&vcc3v3_sys>;
 355                 vcc9-supply = <&vcc5v0_sys>;
 356                 vcc10-supply = <&vcc5v0_sys>;
 357                 vcc11-supply = <&vcc5v0_sys>;
 358                 vcc12-supply = <&vcc3v3_sys>;
 359                 vddio-supply = <&vcca_1v8>;
 360
 361                 regulators {
 362                         vdd_center: DCDC_REG1 {
 363                                 regulator-name = "vdd_center";
 364                                 regulator-always-on;
 365                                 regulator-boot-on;
 366                                 regulator-min-microvolt = <750000>;
 367                                 regulator-max-microvolt = <1350000>;
 368                                 regulator-ramp-delay = <6001>;
 369                                 regulator-state-mem {
 370                                         regulator-off-in-suspend;
 371                                 };
 372                         };
 373
 374                         vdd_cpu_l: DCDC_REG2 {
 375                                 regulator-name = "vdd_cpu_l";
 376                                 regulator-always-on;
 377                                 regulator-boot-on;
 378                                 regulator-min-microvolt = <750000>;
 379                                 regulator-max-microvolt = <1350000>;
 380                                 regulator-ramp-delay = <6001>;
 381                                 regulator-state-mem {
 382                                         regulator-off-in-suspend;
 383                                 };
 384                         };
 385
 386                         vcc_ddr: DCDC_REG3 {
 387                                 regulator-name = "vcc_ddr";
 388                                 regulator-always-on;
 389                                 regulator-boot-on;
 390                                 regulator-state-mem {
 391                                         regulator-on-in-suspend;
 392                                 };
 393                         };
 394
 395                         vcc_1v8: DCDC_REG4 {
 396                                 regulator-name = "vcc_1v8";
 397                                 regulator-always-on;
 398                                 regulator-boot-on;
 399                                 regulator-min-microvolt = <1800000>;
 400                                 regulator-max-microvolt = <1800000>;
 401                                 regulator-state-mem {
 402                                         regulator-on-in-suspend;
 403                                         regulator-suspend-microvolt = <1800000>;
 404                                 };
 405                         };
 406
 407                         vcc1v8_dvp: LDO_REG1 {
 408                                 regulator-name = "vcc1v8_dvp";
 409                                 regulator-always-on;
 410                                 regulator-boot-on;
 411                                 regulator-min-microvolt = <1800000>;
 412                                 regulator-max-microvolt = <1800000>;
 413                                 regulator-state-mem {
 414                                         regulator-off-in-suspend;
 415                                 };
 416                         };
 417
 418                         vcc3v0_touch: LDO_REG2 {
 419                                 regulator-name = "vcc3v0_touch";
 420                                 regulator-min-microvolt = <3000000>;
 421                                 regulator-max-microvolt = <3000000>;
 422                                 regulator-state-mem {
 423                                         regulator-off-in-suspend;
 424                                 };
 425                         };
 426
 427                         vcca_1v8: LDO_REG3 {
 428                                 regulator-name = "vcca_1v8";
 429                                 regulator-always-on;
 430                                 regulator-boot-on;
 431                                 regulator-min-microvolt = <1800000>;
 432                                 regulator-max-microvolt = <1800000>;
 433                                 regulator-state-mem {
 434                                         regulator-on-in-suspend;
 435                                         regulator-suspend-microvolt = <1800000>;
 436                                 };
 437                         };
 438
 439                         vcc_sdio: LDO_REG4 {
 440                                 regulator-name = "vcc_sdio";
 441                                 regulator-always-on;
 442                                 regulator-boot-on;
 443                                 regulator-min-microvolt = <1800000>;
 444                                 regulator-max-microvolt = <3000000>;
 445                                 regulator-state-mem {
 446                                         regulator-on-in-suspend;
 447                                         regulator-suspend-microvolt = <3000000>;
 448                                 };
 449                         };
 450
 451                         vcca3v0_codec: LDO_REG5 {
 452                                 regulator-name = "vcca3v0_codec";
 453                                 regulator-always-on;
 454                                 regulator-boot-on;
 455                                 regulator-min-microvolt = <3000000>;
 456                                 regulator-max-microvolt = <3000000>;
 457                                 regulator-state-mem {
 458                                         regulator-off-in-suspend;
 459                                 };
 460                         };
 461
 462                         vcc_1v5: LDO_REG6 {
 463                                 regulator-name = "vcc_1v5";
 464                                 regulator-always-on;
 465                                 regulator-boot-on;
 466                                 regulator-min-microvolt = <1500000>;
 467                                 regulator-max-microvolt = <1500000>;
 468                                 regulator-state-mem {
 469                                         regulator-on-in-suspend;
 470                                         regulator-suspend-microvolt = <1500000>;
 471                                 };
 472                         };
 473
 474                         vcca1v8_codec: LDO_REG7 {
 475                                 regulator-name = "vcca1v8_codec";
 476                                 regulator-always-on;
 477                                 regulator-boot-on;
 478                                 regulator-min-microvolt = <1800000>;
 479                                 regulator-max-microvolt = <1800000>;
 480                                 regulator-state-mem {
 481                                         regulator-off-in-suspend;
 482                                 };
 483                         };
 484
 485                         vcc_3v0: LDO_REG8 {
 486                                 regulator-name = "vcc_3v0";
 487                                 regulator-always-on;
 488                                 regulator-boot-on;
 489                                 regulator-min-microvolt = <3000000>;
 490                                 regulator-max-microvolt = <3000000>;
 491                                 regulator-state-mem {
 492                                         regulator-on-in-suspend;
 493                                         regulator-suspend-microvolt = <3000000>;
 494                                 };
 495                         };
 496
 497                         vcc3v3_s3: vcc_lan: SWITCH_REG1 {
 498                                 regulator-name = "vcc3v3_s3";
 499                                 regulator-always-on;
 500                                 regulator-boot-on;
 501                                 regulator-state-mem {
 502                                         regulator-off-in-suspend;
 503                                 };
 504                         };
 505
 506                         vcc3v3_s0: SWITCH_REG2 {
 507                                 regulator-name = "vcc3v3_s0";
 508                                 regulator-state-mem {
 509                                         regulator-off-in-suspend;
 510                                 };
 511                         };
 512                 };
 513         };
 514
 515         vdd_cpu_b: regulator@40 {
 516                 compatible = "silergy,syr827";
 517                 reg = <0x40>;
 518                 fcs,suspend-voltage-selector = <1>;
 519                 pinctrl-names = "default";
 520                 pinctrl-0 = <&vsel1_pin>;
 521                 regulator-name = "vdd_cpu_b";
 522                 regulator-min-microvolt = <712500>;
 523                 regulator-max-microvolt = <1500000>;
 524                 regulator-ramp-delay = <1000>;
 525                 regulator-always-on;
 526                 regulator-boot-on;
 527                 vin-supply = <&vcc5v0_sys>;
 528
 529                 regulator-state-mem {
 530                         regulator-off-in-suspend;
 531                 };
 532         };
 533
 534         vdd_gpu: regulator@41 {
 535                 compatible = "silergy,syr828";
 536                 reg = <0x41>;
 537                 fcs,suspend-voltage-selector = <1>;
 538                 pinctrl-names = "default";
 539                 pinctrl-0 = <&vsel2_pin>;
 540                 regulator-name = "vdd_gpu";
 541                 regulator-min-microvolt = <712500>;
 542                 regulator-max-microvolt = <1500000>;
 543                 regulator-ramp-delay = <1000>;
 544                 regulator-always-on;
 545                 regulator-boot-on;
 546                 vin-supply = <&vcc5v0_sys>;
 547
 548                 regulator-state-mem {
 549                         regulator-off-in-suspend;
 550                 };
 551         };
 552 };
 553
 554 &i2c1 {
 555         i2c-scl-rising-time-ns = <300>;
 556         i2c-scl-falling-time-ns = <15>;
 557         status = "okay";
 558 };
 559
 560 &i2c3 {
 561         i2c-scl-rising-time-ns = <450>;
 562         i2c-scl-falling-time-ns = <15>;
 563         status = "okay";
 564 };
 565
 566 &i2c4 {
 567         i2c-scl-rising-time-ns = <600>;
 568         i2c-scl-falling-time-ns = <20>;
 569         status = "okay";
 570
 571         fusb0: typec-portc@22 {
 572                 compatible = "fcs,fusb302";
 573                 reg = <0x22>;
 574                 interrupt-parent = <&gpio1>;
 575                 interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
 576                 pinctrl-names = "default";
 577                 pinctrl-0 = <&fusb0_int>;
 578                 vbus-supply = <&vcc5v0_typec>;
 579                 status = "okay";
 580         };
 581
 582         /* enable for pine64 touch screen support */
 583         touch: touchscreen@5d {
 584                 compatible = "goodix,gt911";
 585                 reg = <0x5d>;
 586                 interrupt-parent = <&gpio4>;
 587                 interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
 588                 AVDD28-supply = <&vcc3v0_touch>;
 589                 VDDIO-supply = <&vcc3v0_touch>;
 590                 irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
 591                 reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
 592                 status = "disabled";
 593         };
 594 };
 595
 596 &i2s0 {
 597         rockchip,playback-channels = <8>;
 598         rockchip,capture-channels = <8>;
 599         status = "okay";
 600 };
 601
 602 &i2s1 {
 603         rockchip,playback-channels = <2>;
 604         rockchip,capture-channels = <2>;
 605         status = "okay";
 606
 607         i2s1_p0: port {
 608                 i2s1_p0_0: endpoint {
 609                         dai-format = "i2s";
 610                         mclk-fs = <256>;
 611                         remote-endpoint = <&es8316_p0_0>;
 612                 };
 613         };
 614 };
 615
 616 &i2s2 {
 617         status = "okay";
 618 };
 619
 620 &io_domains {
 621         status = "okay";
 622
 623         bt656-supply = <&vcc1v8_dvp>;
 624         audio-supply = <&vcc_3v0>;
 625         sdmmc-supply = <&vcc_sdio>;
 626         gpio1830-supply = <&vcc_3v0>;
 627 };
 628
 629 /* enable for pine64 panel display support */
 630 &mipi_dsi {
 631         clock-master;
 632         status = "disabled";
 633
 634         ports {
 635                 mipi_out: port@1 {
 636                         reg = <1>;
 637
 638                         mipi_out_panel: endpoint {
 639                                 remote-endpoint = <&mipi_in_panel>;
 640                         };
 641                 };
 642         };
 643
 644         mipi_panel: panel@0 {
 645                 compatible = "feiyang,fy07024di26a30d";
 646                 reg = <0>;
 647                 avdd-supply = <&avdd>;
 648                 backlight = <&backlight>;
 649                 dvdd-supply = <&vcc3v3_s0>;
 650                 ports {
 651                         #address-cells = <1>;
 652                         #size-cells = <0>;
 653
 654                         port@0 {
 655                                 reg = <0>;
 656
 657                                 mipi_in_panel: endpoint {
 658                                         remote-endpoint = <&mipi_out_panel>;
 659                                 };
 660                         };
 661                 };
 662         };
 663 };
 664
 665 &pcie0 {
 666         ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
 667         num-lanes = <4>;
 668         pinctrl-names = "default";
 669         pinctrl-0 = <&pcie_perst>;
 670         vpcie12v-supply = <&vcc12v_dcin>;
 671         vpcie3v3-supply = <&vcc3v3_pcie>;
 672         status = "okay";
 673 };
 674
 675 &pcie_phy {
 676         status = "okay";
 677 };
 678
 679 &pmu_io_domains {
 680         pmu1830-supply = <&vcc_3v0>;
 681         status = "okay";
 682 };
 683
 684 &pinctrl {
 685         bt {
 686                 bt_enable_h: bt-enable-h {
 687                         rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
 688                 };
 689
 690                 bt_host_wake_l: bt-host-wake-l {
 691                         rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
 692                 };
 693
 694                 bt_wake_l: bt-wake-l {
 695                         rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
 696                 };
 697         };
 698
 699         buttons {
 700                 pwrbtn: pwrbtn {
 701                         rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 702                 };
 703         };
 704
 705         fusb302x {
 706                 fusb0_int: fusb0-int {
 707                         rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
 708                 };
 709         };
 710
 711         ir {
 712                 ir_int: ir-int {
 713                         rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
 714                 };
 715         };
 716
 717         leds {
 718                 work_led_pin: work-led-pin {
 719                         rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 720                 };
 721
 722                 diy_led_pin: diy-led-pin {
 723                         rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 724                 };
 725         };
 726
 727         pcie {
 728                 pcie_perst: pcie-perst {
 729                         rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 730                 };
 731
 732                 pcie_pwr_en: pcie-pwr-en {
 733                         rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
 734                 };
 735         };
 736
 737         pmic {
 738                 pmic_int_l: pmic-int-l {
 739                         rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
 740                 };
 741
 742                 vsel1_pin: vsel1-pin {
 743                         rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
 744                 };
 745
 746                 vsel2_pin: vsel2-pin {
 747                         rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
 748                 };
 749         };
 750
 751         sdcard {
 752                 sdmmc0_pwr_h: sdmmc0-pwr-h {
 753                         rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 754                 };
 755
 756         };
 757
 758         sdio-pwrseq {
 759                 wifi_enable_h: wifi-enable-h {
 760                         rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
 761                 };
 762         };
 763
 764         usb-typec {
 765                 vcc5v0_typec_en: vcc5v0_typec_en {
 766                         rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
 767                 };
 768         };
 769
 770         usb2 {
 771                 vcc5v0_host_en: vcc5v0-host-en {
 772                         rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
 773                 };
 774         };
 775 };
 776
 777 &pwm0 {
 778         status = "okay";
 779 };
 780
 781 &pwm1 {
 782         status = "okay";
 783 };
 784
 785 &pwm2 {
 786         status = "okay";
 787 };
 788
 789 &saradc {
 790         vref-supply = <&vcca1v8_s3>;
 791         status = "okay";
 792 };
 793
 794 &sdio0 {
 795         bus-width = <4>;
 796         cap-sd-highspeed;
 797         cap-sdio-irq;
 798         disable-wp;
 799         keep-power-in-suspend;
 800         mmc-pwrseq = <&sdio_pwrseq>;
 801         non-removable;
 802         pinctrl-names = "default";
 803         pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 804         sd-uhs-sdr104;
 805         status = "okay";
 806 };
 807
 808 &sdmmc {
 809         bus-width = <4>;
 810         cap-sd-highspeed;
 811         cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
 812         disable-wp;
 813         max-frequency = <150000000>;
 814         pinctrl-names = "default";
 815         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
 816         vmmc-supply = <&vcc3v0_sd>;
 817         vqmmc-supply = <&vcc_sdio>;
 818         status = "okay";
 819 };
 820
 821 &sdhci {
 822         bus-width = <8>;
 823         mmc-hs200-1_8v;
 824         non-removable;
 825         status = "okay";
 826 };
 827
 828 &spdif {
 829         pinctrl-0 = <&spdif_bus_1>;
 830
 831         spdif_p0: port {
 832                 spdif_p0_0: endpoint {
 833                         remote-endpoint = <&dit_p0_0>;
 834                 };
 835         };
 836 };
 837
 838 &spi1 {
 839         status = "okay";
 840
 841         flash@0 {
 842                 compatible = "jedec,spi-nor";
 843                 reg = <0>;
 844                 spi-max-frequency = <10000000>;
 845         };
 846 };
 847
 848 &tcphy0 {
 849         status = "okay";
 850 };
 851
 852 &tcphy1 {
 853         status = "okay";
 854 };
 855
 856 &tsadc {
 857         /* tshut mode 0:CRU 1:GPIO */
 858         rockchip,hw-tshut-mode = <1>;
 859         /* tshut polarity 0:LOW 1:HIGH */
 860         rockchip,hw-tshut-polarity = <1>;
 861         status = "okay";
 862 };
 863
 864 &u2phy0 {
 865         status = "okay";
 866
 867         u2phy0_otg: otg-port {
 868                 status = "okay";
 869         };
 870
 871         u2phy0_host: host-port {
 872                 phy-supply = <&vcc5v0_host>;
 873                 status = "okay";
 874         };
 875 };
 876
 877 &u2phy1 {
 878         status = "okay";
 879
 880         u2phy1_otg: otg-port {
 881                 status = "okay";
 882         };
 883
 884         u2phy1_host: host-port {
 885                 phy-supply = <&vcc5v0_host>;
 886                 status = "okay";
 887         };
 888 };
 889
 890 &uart0 {
 891         pinctrl-names = "default";
 892         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
 893         status = "okay";
 894
 895         bluetooth {
 896                 compatible = "brcm,bcm43438-bt";
 897                 clocks = <&rk808 1>;
 898                 clock-names = "lpo";
 899                 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 900                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 901                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
 902                 pinctrl-names = "default";
 903                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
 904                 vbat-supply = <&vcc3v3_sys>;
 905                 vddio-supply = <&vcc_1v8>;
 906         };
 907 };
 908
 909 &uart2 {
 910         status = "okay";
 911 };
 912
 913 &usb_host0_ehci {
 914         status = "okay";
 915 };
 916
 917 &usb_host0_ohci {
 918         status = "okay";
 919 };
 920
 921 &usb_host1_ehci {
 922         status = "okay";
 923 };
 924
 925 &usb_host1_ohci {
 926         status = "okay";
 927 };
 928
 929 &usbdrd3_0 {
 930         status = "okay";
 931 };
 932
 933 &usbdrd_dwc3_0 {
 934         status = "okay";
 935         dr_mode = "host";
 936 };
 937
 938 &usbdrd3_1 {
 939         status = "okay";
 940 };
 941
 942 &usbdrd_dwc3_1 {
 943         status = "okay";
 944         dr_mode = "host";
 945 };
 946
 947 &vopb {
 948         status = "okay";
 949 };
 950
 951 &vopb_mmu {
 952         status = "okay";
 953 };
 954
 955 &vopl {
 956         status = "okay";
 957 };
 958
 959 &vopl_mmu {
 960         status = "okay";
 961 };