arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
   4  * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
   5  */
   6
   7 /dts-v1/;
   8 #include "rk3399-rock-pi-4.dtsi"
   9 #include "rk3399-t-opp.dtsi"
  10
  11 / {
  12         model = "Radxa ROCK 4SE";
  13         compatible = "radxa,rock-4se", "rockchip,rk3399";
  14
  15         aliases {
  16                 mmc2 = &sdio0;
  17         };
  18 };
  19
  20 &pinctrl {
  21         usb2 {
  22                 vcc5v0_host_en: vcc5v0-host-en {
  23                         rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
  24                 };
  25         };
  26 };
  27
  28 &sdio0 {
  29         status = "okay";
  30
  31         brcmf: wifi@1 {
  32                 compatible = "brcm,bcm4329-fmac";
  33                 reg = <1>;
  34                 interrupt-parent = <&gpio0>;
  35                 interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
  36                 interrupt-names = "host-wake";
  37                 pinctrl-names = "default";
  38                 pinctrl-0 = <&wifi_host_wake_l>;
  39         };
  40 };
  41
  42 &uart0 {
  43         status = "okay";
  44
  45         bluetooth {
  46                 compatible = "brcm,bcm4345c5";
  47                 clocks = <&rk808 1>;
  48                 clock-names = "lpo";
  49                 device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
  50                 host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
  51                 shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
  52                 max-speed = <1500000>;
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
  55                 vbat-supply = <&vcc3v3_sys>;
  56                 vddio-supply = <&vcc_1v8>;
  57         };
  58 };
  59
  60 &vcc5v0_host {
  61         enable-active-high;
  62         gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
  63         pinctrl-names = "default";
  64         pinctrl-0 = <&vcc5v0_host_en>;
  65 };