Linux 6.7-rc7
[linux-modified.git] / arch / arm64 / boot / dts / rockchip / rk3399-puma.dtsi
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
4  */
5
6 #include <dt-bindings/pwm/pwm.h>
7 #include "rk3399.dtsi"
8 #include "rk3399-opp.dtsi"
9
10 / {
11         aliases {
12                 mmc0 = &sdhci;
13         };
14
15         leds {
16                 compatible = "gpio-leds";
17                 pinctrl-names = "default";
18                 pinctrl-0 = <&module_led_pin>;
19
20                 module_led: led-0 {
21                         label = "module_led";
22                         gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
23                         linux,default-trigger = "heartbeat";
24                         panic-indicator;
25                 };
26         };
27
28         extcon_usb3: extcon-usb3 {
29                 compatible = "linux,extcon-usb-gpio";
30                 id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
31                 pinctrl-names = "default";
32                 pinctrl-0 = <&usb3_id>;
33         };
34
35         clkin_gmac: external-gmac-clock {
36                 compatible = "fixed-clock";
37                 clock-frequency = <125000000>;
38                 clock-output-names = "clkin_gmac";
39                 #clock-cells = <0>;
40         };
41
42         vcc1v2_phy: vcc1v2-phy {
43                 compatible = "regulator-fixed";
44                 regulator-name = "vcc1v2_phy";
45                 regulator-always-on;
46                 regulator-boot-on;
47                 regulator-min-microvolt = <1200000>;
48                 regulator-max-microvolt = <1200000>;
49                 vin-supply = <&vcc5v0_sys>;
50         };
51
52         vcc3v3_sys: vcc3v3-sys {
53                 compatible = "regulator-fixed";
54                 regulator-name = "vcc3v3_sys";
55                 regulator-always-on;
56                 regulator-boot-on;
57                 regulator-min-microvolt = <3300000>;
58                 regulator-max-microvolt = <3300000>;
59                 vin-supply = <&vcc5v0_sys>;
60         };
61
62         vcc5v0_host: vcc5v0-host-regulator {
63                 compatible = "regulator-fixed";
64                 gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
65                 pinctrl-names = "default";
66                 pinctrl-0 = <&vcc5v0_host_en>;
67                 regulator-name = "vcc5v0_host";
68                 regulator-always-on;
69                 vin-supply = <&vcc5v0_sys>;
70         };
71
72         vcc5v0_sys: vcc5v0-sys {
73                 compatible = "regulator-fixed";
74                 regulator-name = "vcc5v0_sys";
75                 regulator-always-on;
76                 regulator-boot-on;
77                 regulator-min-microvolt = <5000000>;
78                 regulator-max-microvolt = <5000000>;
79         };
80
81         vdd_log: vdd-log {
82                 compatible = "pwm-regulator";
83                 pwms = <&pwm2 0 25000 1>;
84                 pwm-supply = <&vcc5v0_sys>;
85                 regulator-name = "vdd_log";
86                 regulator-min-microvolt = <800000>;
87                 regulator-max-microvolt = <1400000>;
88                 regulator-always-on;
89                 regulator-boot-on;
90         };
91 };
92
93 &cpu_b0 {
94         cpu-supply = <&vdd_cpu_b>;
95 };
96
97 &cpu_b1 {
98         cpu-supply = <&vdd_cpu_b>;
99 };
100
101 &cpu_l0 {
102         cpu-supply = <&vdd_cpu_l>;
103 };
104
105 &cpu_l1 {
106         cpu-supply = <&vdd_cpu_l>;
107 };
108
109 &cpu_l2 {
110         cpu-supply = <&vdd_cpu_l>;
111 };
112
113 &cpu_l3 {
114         cpu-supply = <&vdd_cpu_l>;
115 };
116
117 &emmc_phy {
118         status = "okay";
119         drive-impedance-ohm = <33>;
120 };
121
122 &gmac {
123         assigned-clocks = <&cru SCLK_RMII_SRC>;
124         assigned-clock-parents = <&clkin_gmac>;
125         clock_in_out = "input";
126         phy-supply = <&vcc1v2_phy>;
127         phy-mode = "rgmii";
128         pinctrl-names = "default";
129         pinctrl-0 = <&rgmii_pins>;
130         snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
131         snps,reset-active-low;
132         snps,reset-delays-us = <0 10000 50000>;
133         tx_delay = <0x10>;
134         rx_delay = <0x10>;
135         status = "okay";
136 };
137
138 &gpu {
139         mali-supply = <&vdd_gpu>;
140         status = "okay";
141 };
142
143 &i2c0 {
144         status = "okay";
145         i2c-scl-rising-time-ns = <168>;
146         i2c-scl-falling-time-ns = <4>;
147         clock-frequency = <400000>;
148
149         rk808: pmic@1b {
150                 compatible = "rockchip,rk808";
151                 reg = <0x1b>;
152                 interrupt-parent = <&gpio1>;
153                 interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
154                 #clock-cells = <1>;
155                 clock-output-names = "xin32k", "rk808-clkout2";
156                 pinctrl-names = "default";
157                 pinctrl-0 = <&pmic_int_l>;
158                 rockchip,system-power-controller;
159                 wakeup-source;
160
161                 vcc1-supply = <&vcc5v0_sys>;
162                 vcc2-supply = <&vcc5v0_sys>;
163                 vcc3-supply = <&vcc5v0_sys>;
164                 vcc4-supply = <&vcc5v0_sys>;
165                 vcc6-supply = <&vcc5v0_sys>;
166                 vcc7-supply = <&vcc5v0_sys>;
167                 vcc8-supply = <&vcc3v3_sys>;
168                 vcc9-supply = <&vcc5v0_sys>;
169                 vcc10-supply = <&vcc5v0_sys>;
170                 vcc11-supply = <&vcc5v0_sys>;
171                 vcc12-supply = <&vcc3v3_sys>;
172                 vddio-supply = <&vcc1v8_pmu>;
173
174                 regulators {
175                         vdd_center: DCDC_REG1 {
176                                 regulator-name = "vdd_center";
177                                 regulator-min-microvolt = <750000>;
178                                 regulator-max-microvolt = <1350000>;
179                                 regulator-ramp-delay = <6001>;
180                                 regulator-always-on;
181                                 regulator-boot-on;
182                                 regulator-state-mem {
183                                         regulator-off-in-suspend;
184                                 };
185                         };
186
187                         vdd_cpu_l: DCDC_REG2 {
188                                 regulator-name = "vdd_cpu_l";
189                                 regulator-min-microvolt = <750000>;
190                                 regulator-max-microvolt = <1350000>;
191                                 regulator-ramp-delay = <6001>;
192                                 regulator-always-on;
193                                 regulator-boot-on;
194                                 regulator-state-mem {
195                                         regulator-off-in-suspend;
196                                 };
197                         };
198
199                         vcc_ddr: DCDC_REG3 {
200                                 regulator-name = "vcc_ddr";
201                                 regulator-always-on;
202                                 regulator-boot-on;
203                                 regulator-state-mem {
204                                         regulator-on-in-suspend;
205                                 };
206                         };
207
208                         vcc_1v8: DCDC_REG4 {
209                                 regulator-name = "vcc_1v8";
210                                 regulator-min-microvolt = <1800000>;
211                                 regulator-max-microvolt = <1800000>;
212                                 regulator-always-on;
213                                 regulator-boot-on;
214                                 regulator-state-mem {
215                                         regulator-on-in-suspend;
216                                         regulator-suspend-microvolt = <1800000>;
217                                 };
218                         };
219
220                         vcc_ldo1: LDO_REG1 {
221                                 regulator-name = "vcc_ldo1";
222                                 regulator-min-microvolt = <1800000>;
223                                 regulator-max-microvolt = <1800000>;
224                                 regulator-boot-on;
225                                 regulator-state-mem {
226                                         regulator-off-in-suspend;
227                                 };
228                         };
229
230                         vcc1v8_hdmi: LDO_REG2 {
231                                 regulator-name = "vcc1v8_hdmi";
232                                 regulator-min-microvolt = <1800000>;
233                                 regulator-max-microvolt = <1800000>;
234                                 regulator-always-on;
235                                 regulator-boot-on;
236                                 regulator-state-mem {
237                                         regulator-off-in-suspend;
238                                 };
239                         };
240
241                         vcc1v8_pmu: LDO_REG3 {
242                                 regulator-name = "vcc1v8_pmu";
243                                 regulator-min-microvolt = <1800000>;
244                                 regulator-max-microvolt = <1800000>;
245                                 regulator-always-on;
246                                 regulator-boot-on;
247                                 regulator-state-mem {
248                                         regulator-on-in-suspend;
249                                         regulator-suspend-microvolt = <1800000>;
250                                 };
251                         };
252
253                         vcc_sd: LDO_REG4 {
254                                 regulator-name = "vcc_sd";
255                                 regulator-min-microvolt = <1800000>;
256                                 regulator-max-microvolt = <3000000>;
257                                 regulator-always-on;
258                                 regulator-boot-on;
259                                 regulator-state-mem {
260                                         regulator-on-in-suspend;
261                                         regulator-suspend-microvolt = <3000000>;
262                                 };
263                         };
264
265                         vcc_ldo5: LDO_REG5 {
266                                 regulator-name = "vcc_ldo5";
267                                 regulator-min-microvolt = <3000000>;
268                                 regulator-max-microvolt = <3000000>;
269                                 regulator-boot-on;
270                                 regulator-state-mem {
271                                         regulator-off-in-suspend;
272                                 };
273                         };
274
275                         vcc_ldo6: LDO_REG6 {
276                                 regulator-name = "vcc_ldo6";
277                                 regulator-min-microvolt = <1500000>;
278                                 regulator-max-microvolt = <1500000>;
279                                 regulator-boot-on;
280                                 regulator-state-mem {
281                                         regulator-off-in-suspend;
282                                 };
283                         };
284
285                         vcc0v9_hdmi: LDO_REG7 {
286                                 regulator-name = "vcc0v9_hdmi";
287                                 regulator-min-microvolt = <900000>;
288                                 regulator-max-microvolt = <900000>;
289                                 regulator-always-on;
290                                 regulator-boot-on;
291                                 regulator-state-mem {
292                                         regulator-off-in-suspend;
293                                 };
294                         };
295
296                         vcc_efuse: LDO_REG8 {
297                                 regulator-name = "vcc_efuse";
298                                 regulator-min-microvolt = <1800000>;
299                                 regulator-max-microvolt = <1800000>;
300                                 regulator-always-on;
301                                 regulator-boot-on;
302                                 regulator-state-mem {
303                                         regulator-off-in-suspend;
304                                 };
305                         };
306
307                         vcc3v3_s3: SWITCH_REG1 {
308                                 regulator-name = "vcc3v3_s3";
309                                 regulator-always-on;
310                                 regulator-boot-on;
311                                 regulator-state-mem {
312                                         regulator-off-in-suspend;
313                                 };
314                         };
315
316                         vcc3v3_s0: SWITCH_REG2 {
317                                 regulator-name = "vcc3v3_s0";
318                                 regulator-always-on;
319                                 regulator-boot-on;
320                                 regulator-state-mem {
321                                         regulator-off-in-suspend;
322                                 };
323                         };
324                 };
325         };
326
327         vdd_gpu: regulator@60 {
328                 compatible = "fcs,fan53555";
329                 reg = <0x60>;
330                 fcs,suspend-voltage-selector = <1>;
331                 regulator-name = "vdd_gpu";
332                 regulator-min-microvolt = <600000>;
333                 regulator-max-microvolt = <1230000>;
334                 regulator-ramp-delay = <1000>;
335                 regulator-always-on;
336                 regulator-boot-on;
337                 vin-supply = <&vcc5v0_sys>;
338         };
339 };
340
341 &i2c7 {
342         status = "okay";
343         clock-frequency = <400000>;
344
345         fan: fan@18 {
346                 compatible = "ti,amc6821";
347                 reg = <0x18>;
348                 #cooling-cells = <2>;
349         };
350
351         rtc_twi: rtc@6f {
352                 compatible = "isil,isl1208";
353                 reg = <0x6f>;
354         };
355 };
356
357 &i2c8 {
358         status = "okay";
359         clock-frequency = <400000>;
360
361         vdd_cpu_b: regulator@60 {
362                 compatible = "fcs,fan53555";
363                 reg = <0x60>;
364                 vin-supply = <&vcc5v0_sys>;
365                 regulator-name = "vdd_cpu_b";
366                 regulator-min-microvolt = <600000>;
367                 regulator-max-microvolt = <1230000>;
368                 regulator-ramp-delay = <1000>;
369                 fcs,suspend-voltage-selector = <1>;
370                 regulator-always-on;
371                 regulator-boot-on;
372         };
373 };
374
375 &i2s0 {
376         pinctrl-0 = <&i2s0_2ch_bus>;
377         rockchip,playback-channels = <2>;
378         rockchip,capture-channels = <2>;
379         status = "okay";
380 };
381
382 /*
383  * As Q7 does not specify neither a global nor a RX clock for I2S these
384  * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
385  * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
386  * conflicts.
387  */
388 &i2s0_2ch_bus {
389         rockchip,pins =
390                 <3 RK_PD0 1 &pcfg_pull_none>,
391                 <3 RK_PD2 1 &pcfg_pull_none>,
392                 <3 RK_PD3 1 &pcfg_pull_none>,
393                 <3 RK_PD7 1 &pcfg_pull_none>;
394 };
395
396 &io_domains {
397         status = "okay";
398         bt656-supply = <&vcc_1v8>;
399         audio-supply = <&vcc_1v8>;
400         sdmmc-supply = <&vcc_sd>;
401         gpio1830-supply = <&vcc_1v8>;
402 };
403
404 &pmu_io_domains {
405         status = "okay";
406         pmu1830-supply = <&vcc_1v8>;
407 };
408
409 &pwm2 {
410         status = "okay";
411 };
412
413 &pinctrl {
414         i2c8 {
415                 i2c8_xfer_a: i2c8-xfer {
416                         rockchip,pins =
417                           <1 RK_PC4 1 &pcfg_pull_up>,
418                           <1 RK_PC5 1 &pcfg_pull_up>;
419                 };
420         };
421
422         leds {
423                 module_led_pin: module-led-pin {
424                         rockchip,pins =
425                           <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
426                 };
427         };
428
429         pmic {
430                 pmic_int_l: pmic-int-l {
431                         rockchip,pins =
432                           <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
433                 };
434         };
435
436         usb2 {
437                 vcc5v0_host_en: vcc5v0-host-en {
438                         rockchip,pins =
439                           <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
440                 };
441         };
442
443         usb3 {
444                 usb3_id: usb3-id {
445                         rockchip,pins =
446                           <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
447                 };
448         };
449 };
450
451 &sdhci {
452         /*
453          * Signal integrity isn't great at 200MHz but 100MHz has proven stable
454          * enough.
455          */
456         max-frequency = <100000000>;
457
458         bus-width = <8>;
459         mmc-hs400-1_8v;
460         mmc-hs400-enhanced-strobe;
461         non-removable;
462         status = "okay";
463 };
464
465 &sdmmc {
466         vqmmc-supply = <&vcc_sd>;
467 };
468
469 &spi1 {
470         status = "okay";
471
472         norflash: flash@0 {
473                 compatible = "jedec,spi-nor";
474                 reg = <0>;
475                 spi-max-frequency = <50000000>;
476         };
477 };
478
479 &tcphy1 {
480         status = "okay";
481 };
482
483 &tsadc {
484         rockchip,hw-tshut-mode = <1>;
485         rockchip,hw-tshut-polarity = <1>;
486         status = "okay";
487 };
488
489 &u2phy1 {
490         status = "okay";
491
492         u2phy1_otg: otg-port {
493                 status = "okay";
494         };
495
496         u2phy1_host: host-port {
497                 phy-supply = <&vcc5v0_host>;
498                 status = "okay";
499         };
500 };
501
502 &usbdrd3_1 {
503         status = "okay";
504 };
505
506 &usbdrd_dwc3_1 {
507         status = "okay";
508         dr_mode = "host";
509 };
510
511 &usb_host1_ehci {
512         status = "okay";
513 };
514
515 &usb_host1_ohci {
516         status = "okay";
517 };