arch/arm64/boot/dts/renesas/r8a77995-draak.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Device Tree Source for the Draak board
   4  *
   5  * Copyright (C) 2016-2018 Renesas Electronics Corp.
   6  * Copyright (C) 2017 Glider bvba
   7  */
   8
   9 /dts-v1/;
  10 #include "r8a77995.dtsi"
  11 #include <dt-bindings/gpio/gpio.h>
  12
  13 / {
  14         model = "Renesas Draak board based on r8a77995";
  15         compatible = "renesas,draak", "renesas,r8a77995";
  16
  17         aliases {
  18                 serial0 = &scif2;
  19                 ethernet0 = &avb;
  20         };
  21
  22         backlight: backlight {
  23                 compatible = "pwm-backlight";
  24                 pwms = <&pwm1 0 50000>;
  25
  26                 brightness-levels = <512 511 505 494 473 440 392 327 241 133 0>;
  27                 default-brightness-level = <10>;
  28
  29                 power-supply = <&reg_12p0v>;
  30                 enable-gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
  31         };
  32
  33         chosen {
  34                 bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
  35                 stdout-path = "serial0:115200n8";
  36         };
  37
  38         composite-in {
  39                 compatible = "composite-video-connector";
  40
  41                 port {
  42                         composite_con_in: endpoint {
  43                                 remote-endpoint = <&adv7180_in>;
  44                         };
  45                 };
  46         };
  47
  48         hdmi-in {
  49                 compatible = "hdmi-connector";
  50                 type = "a";
  51
  52                 port {
  53                         hdmi_con_in: endpoint {
  54                                 remote-endpoint = <&adv7612_in>;
  55                         };
  56                 };
  57         };
  58
  59         hdmi-out {
  60                 compatible = "hdmi-connector";
  61                 type = "a";
  62
  63                 port {
  64                         hdmi_con_out: endpoint {
  65                                 remote-endpoint = <&adv7511_out>;
  66                         };
  67                 };
  68         };
  69
  70         lvds-decoder {
  71                 compatible = "thine,thc63lvd1024";
  72                 vcc-supply = <&reg_3p3v>;
  73
  74                 ports {
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77
  78                         port@0 {
  79                                 reg = <0>;
  80                                 thc63lvd1024_in: endpoint {
  81                                         remote-endpoint = <&lvds0_out>;
  82                                 };
  83                         };
  84
  85                         port@2 {
  86                                 reg = <2>;
  87                                 thc63lvd1024_out: endpoint {
  88                                         remote-endpoint = <&adv7511_in>;
  89                                 };
  90                         };
  91                 };
  92         };
  93
  94         memory@48000000 {
  95                 device_type = "memory";
  96                 /* first 128MB is reserved for secure area. */
  97                 reg = <0x0 0x48000000 0x0 0x18000000>;
  98         };
  99
 100         reg_1p8v: regulator-1p8v {
 101                 compatible = "regulator-fixed";
 102                 regulator-name = "fixed-1.8V";
 103                 regulator-min-microvolt = <1800000>;
 104                 regulator-max-microvolt = <1800000>;
 105                 regulator-boot-on;
 106                 regulator-always-on;
 107         };
 108
 109         reg_3p3v: regulator-3p3v {
 110                 compatible = "regulator-fixed";
 111                 regulator-name = "fixed-3.3V";
 112                 regulator-min-microvolt = <3300000>;
 113                 regulator-max-microvolt = <3300000>;
 114                 regulator-boot-on;
 115                 regulator-always-on;
 116         };
 117
 118         reg_12p0v: regulator-12p0v {
 119                 compatible = "regulator-fixed";
 120                 regulator-name = "D12.0V";
 121                 regulator-min-microvolt = <12000000>;
 122                 regulator-max-microvolt = <12000000>;
 123                 regulator-boot-on;
 124                 regulator-always-on;
 125         };
 126
 127         vga {
 128                 compatible = "vga-connector";
 129
 130                 port {
 131                         vga_in: endpoint {
 132                                 remote-endpoint = <&adv7123_out>;
 133                         };
 134                 };
 135         };
 136
 137         vga-encoder {
 138                 compatible = "adi,adv7123";
 139
 140                 ports {
 141                         #address-cells = <1>;
 142                         #size-cells = <0>;
 143
 144                         port@0 {
 145                                 reg = <0>;
 146                                 adv7123_in: endpoint {
 147                                         remote-endpoint = <&du_out_rgb>;
 148                                 };
 149                         };
 150                         port@1 {
 151                                 reg = <1>;
 152                                 adv7123_out: endpoint {
 153                                         remote-endpoint = <&vga_in>;
 154                                 };
 155                         };
 156                 };
 157         };
 158
 159         x12_clk: x12 {
 160                 compatible = "fixed-clock";
 161                 #clock-cells = <0>;
 162                 clock-frequency = <74250000>;
 163         };
 164 };
 165
 166 &avb {
 167         pinctrl-0 = <&avb0_pins>;
 168         pinctrl-names = "default";
 169         renesas,no-ether-link;
 170         phy-handle = <&phy0>;
 171         status = "okay";
 172
 173         phy0: ethernet-phy@0 {
 174                 rxc-skew-ps = <1500>;
 175                 reg = <0>;
 176                 interrupt-parent = <&gpio5>;
 177                 interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
 178                 /*
 179                  * TX clock internal delay mode is required for reliable
 180                  * 1Gbps communication using the KSZ9031RNX phy present on
 181                  * the Draak board, however, TX clock internal delay mode
 182                  * isn't supported on r8a77995.  Thus, limit speed to
 183                  * 100Mbps for reliable communication.
 184                  */
 185                 max-speed = <100>;
 186         };
 187 };
 188
 189 &can0 {
 190         pinctrl-0 = <&can0_pins>;
 191         pinctrl-names = "default";
 192         status = "okay";
 193 };
 194
 195 &can1 {
 196         pinctrl-0 = <&can1_pins>;
 197         pinctrl-names = "default";
 198         status = "okay";
 199 };
 200
 201 &du {
 202         pinctrl-0 = <&du_pins>;
 203         pinctrl-names = "default";
 204         status = "okay";
 205
 206         clocks = <&cpg CPG_MOD 724>,
 207                  <&cpg CPG_MOD 723>,
 208                  <&x12_clk>;
 209         clock-names = "du.0", "du.1", "dclkin.0";
 210
 211         ports {
 212                 port@0 {
 213                         endpoint {
 214                                 remote-endpoint = <&adv7123_in>;
 215                         };
 216                 };
 217         };
 218 };
 219
 220 &ehci0 {
 221         dr_mode = "host";
 222         status = "okay";
 223 };
 224
 225 &extal_clk {
 226         clock-frequency = <48000000>;
 227 };
 228
 229 &hsusb {
 230         dr_mode = "host";
 231         status = "okay";
 232 };
 233
 234 &i2c0 {
 235         pinctrl-0 = <&i2c0_pins>;
 236         pinctrl-names = "default";
 237         status = "okay";
 238
 239         composite-in@20 {
 240                 compatible = "adi,adv7180cp";
 241                 reg = <0x20>;
 242
 243                 ports {
 244                         #address-cells = <1>;
 245                         #size-cells = <0>;
 246
 247                         port@0 {
 248                                 reg = <0>;
 249                                 adv7180_in: endpoint {
 250                                         remote-endpoint = <&composite_con_in>;
 251                                 };
 252                         };
 253
 254                         port@3 {
 255                                 reg = <3>;
 256
 257                                 /*
 258                                  * The VIN4 video input path is shared between
 259                                  * CVBS and HDMI inputs through SW[49-53]
 260                                  * switches.
 261                                  *
 262                                  * CVBS is the default selection, link it to
 263                                  * VIN4 here.
 264                                  */
 265                                 adv7180_out: endpoint {
 266                                         remote-endpoint = <&vin4_in>;
 267                                 };
 268                         };
 269                 };
 270
 271         };
 272
 273         hdmi-encoder@39 {
 274                 compatible = "adi,adv7511w";
 275                 reg = <0x39>, <0x3f>, <0x38>, <0x3c>;
 276                 reg-names = "main", "edid", "packet", "cec";
 277                 interrupt-parent = <&gpio1>;
 278                 interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
 279
 280                 adi,input-depth = <8>;
 281                 adi,input-colorspace = "rgb";
 282                 adi,input-clock = "1x";
 283                 adi,input-style = <1>;
 284                 adi,input-justification = "evenly";
 285
 286                 ports {
 287                         #address-cells = <1>;
 288                         #size-cells = <0>;
 289
 290                         port@0 {
 291                                 reg = <0>;
 292                                 adv7511_in: endpoint {
 293                                         remote-endpoint = <&thc63lvd1024_out>;
 294                                 };
 295                         };
 296
 297                         port@1 {
 298                                 reg = <1>;
 299                                 adv7511_out: endpoint {
 300                                         remote-endpoint = <&hdmi_con_out>;
 301                                 };
 302                         };
 303                 };
 304         };
 305
 306         hdmi-decoder@4c {
 307                 compatible = "adi,adv7612";
 308                 reg = <0x4c>;
 309                 default-input = <0>;
 310
 311                 ports {
 312                         #address-cells = <1>;
 313                         #size-cells = <0>;
 314
 315                         port@0 {
 316                                 reg = <0>;
 317
 318                                 adv7612_in: endpoint {
 319                                         remote-endpoint = <&hdmi_con_in>;
 320                                 };
 321                         };
 322
 323                         port@2 {
 324                                 reg = <2>;
 325
 326                                 /*
 327                                  * The VIN4 video input path is shared between
 328                                  * CVBS and HDMI inputs through SW[49-53]
 329                                  * switches.
 330                                  *
 331                                  * CVBS is the default selection, leave HDMI
 332                                  * not connected here.
 333                                  */
 334                                 adv7612_out: endpoint {
 335                                         pclk-sample = <0>;
 336                                         hsync-active = <0>;
 337                                         vsync-active = <0>;
 338                                 };
 339                         };
 340                 };
 341         };
 342
 343         eeprom@50 {
 344                 compatible = "rohm,br24t01", "atmel,24c01";
 345                 reg = <0x50>;
 346                 pagesize = <8>;
 347         };
 348 };
 349
 350 &i2c1 {
 351         pinctrl-0 = <&i2c1_pins>;
 352         pinctrl-names = "default";
 353         status = "okay";
 354 };
 355
 356 &lvds0 {
 357         status = "okay";
 358
 359         clocks = <&cpg CPG_MOD 727>,
 360                  <&x12_clk>,
 361                  <&extal_clk>;
 362         clock-names = "fck", "dclkin.0", "extal";
 363
 364         ports {
 365                 port@1 {
 366                         lvds0_out: endpoint {
 367                                 remote-endpoint = <&thc63lvd1024_in>;
 368                         };
 369                 };
 370         };
 371 };
 372
 373 &lvds1 {
 374         /*
 375          * Even though the LVDS1 output is not connected, the encoder must be
 376          * enabled to supply a pixel clock to the DU for the DPAD output when
 377          * LVDS0 is in use.
 378          */
 379         status = "okay";
 380
 381         clocks = <&cpg CPG_MOD 727>,
 382                  <&x12_clk>,
 383                  <&extal_clk>;
 384         clock-names = "fck", "dclkin.0", "extal";
 385 };
 386
 387 &ohci0 {
 388         dr_mode = "host";
 389         status = "okay";
 390 };
 391
 392 &pfc {
 393         avb0_pins: avb {
 394                 mux {
 395                         groups = "avb0_link", "avb0_mdio", "avb0_mii";
 396                         function = "avb0";
 397                 };
 398         };
 399
 400         can0_pins: can0 {
 401                 groups = "can0_data_a";
 402                 function = "can0";
 403         };
 404
 405         can1_pins: can1 {
 406                 groups = "can1_data_a";
 407                 function = "can1";
 408         };
 409
 410         du_pins: du {
 411                 groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
 412                 function = "du";
 413         };
 414
 415         i2c0_pins: i2c0 {
 416                 groups = "i2c0";
 417                 function = "i2c0";
 418         };
 419
 420         i2c1_pins: i2c1 {
 421                 groups = "i2c1";
 422                 function = "i2c1";
 423         };
 424
 425         pwm0_pins: pwm0 {
 426                 groups = "pwm0_c";
 427                 function = "pwm0";
 428         };
 429
 430         pwm1_pins: pwm1 {
 431                 groups = "pwm1_c";
 432                 function = "pwm1";
 433         };
 434
 435         scif2_pins: scif2 {
 436                 groups = "scif2_data";
 437                 function = "scif2";
 438         };
 439
 440         sdhi2_pins: sd2 {
 441                 groups = "mmc_data8", "mmc_ctrl";
 442                 function = "mmc";
 443                 power-source = <1800>;
 444         };
 445
 446         sdhi2_pins_uhs: sd2_uhs {
 447                 groups = "mmc_data8", "mmc_ctrl";
 448                 function = "mmc";
 449                 power-source = <1800>;
 450         };
 451
 452         usb0_pins: usb0 {
 453                 groups = "usb0";
 454                 function = "usb0";
 455         };
 456
 457         vin4_pins_cvbs: vin4 {
 458                 groups = "vin4_data8", "vin4_sync", "vin4_clk";
 459                 function = "vin4";
 460         };
 461 };
 462
 463 &pwm0 {
 464         pinctrl-0 = <&pwm0_pins>;
 465         pinctrl-names = "default";
 466
 467         status = "okay";
 468 };
 469
 470 &pwm1 {
 471         pinctrl-0 = <&pwm1_pins>;
 472         pinctrl-names = "default";
 473
 474         status = "okay";
 475 };
 476
 477 &rwdt {
 478         timeout-sec = <60>;
 479         status = "okay";
 480 };
 481
 482 &scif2 {
 483         pinctrl-0 = <&scif2_pins>;
 484         pinctrl-names = "default";
 485
 486         status = "okay";
 487 };
 488
 489 &sdhi2 {
 490         /* used for on-board eMMC */
 491         pinctrl-0 = <&sdhi2_pins>;
 492         pinctrl-1 = <&sdhi2_pins_uhs>;
 493         pinctrl-names = "default", "state_uhs";
 494
 495         vmmc-supply = <&reg_3p3v>;
 496         vqmmc-supply = <&reg_1p8v>;
 497         bus-width = <8>;
 498         mmc-hs200-1_8v;
 499         non-removable;
 500         status = "okay";
 501 };
 502
 503 &usb2_phy0 {
 504         pinctrl-0 = <&usb0_pins>;
 505         pinctrl-names = "default";
 506
 507         renesas,no-otg-pins;
 508         status = "okay";
 509 };
 510
 511 &vin4 {
 512         pinctrl-0 = <&vin4_pins_cvbs>;
 513         pinctrl-names = "default";
 514
 515         status = "okay";
 516
 517         ports {
 518                 port {
 519                         vin4_in: endpoint {
 520                                 remote-endpoint = <&adv7180_out>;
 521                         };
 522                 };
 523         };
 524 };