1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the V3M Starter Kit board
5 * Copyright (C) 2017 Renesas Electronics Corp.
6 * Copyright (C) 2017 Cogent Embedded, Inc.
10 #include "r8a77970.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
14 model = "Renesas V3M Starter Kit board";
15 compatible = "renesas,v3msk", "renesas,r8a77970";
27 stdout-path = "serial0:115200n8";
31 compatible = "hdmi-connector";
36 remote-endpoint = <&adv7511_out>;
42 compatible = "thine,thc63lvd1024";
43 vcc-supply = <&vcc_d3_3v>;
51 thc63lvd1024_in: endpoint {
52 remote-endpoint = <&lvds0_out>;
58 thc63lvd1024_out: endpoint {
59 remote-endpoint = <&adv7511_in>;
66 device_type = "memory";
67 /* first 128MB is reserved for secure area. */
68 reg = <0x0 0x48000000 0x0 0x78000000>;
71 osc5_clk: osc5-clock {
72 compatible = "fixed-clock";
74 clock-frequency = <148500000>;
77 vcc_d1_8v: regulator-0 {
78 compatible = "regulator-fixed";
79 regulator-name = "VCC_D1.8V";
80 regulator-min-microvolt = <1800000>;
81 regulator-max-microvolt = <1800000>;
86 vcc_d3_3v: regulator-1 {
87 compatible = "regulator-fixed";
88 regulator-name = "VCC_D3.3V";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
95 vcc_vddq_vin0: regulator-2 {
96 compatible = "regulator-fixed";
97 regulator-name = "VCC_VDDQ_VIN0";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
106 pinctrl-0 = <&avb_pins>;
107 pinctrl-names = "default";
109 renesas,no-ether-link;
110 phy-handle = <&phy0>;
111 rx-internal-delay-ps = <1800>;
112 tx-internal-delay-ps = <2000>;
115 phy0: ethernet-phy@0 {
116 compatible = "ethernet-phy-id0022.1622",
117 "ethernet-phy-ieee802.3-c22";
118 rxc-skew-ps = <1500>;
120 interrupt-parent = <&gpio1>;
121 interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
122 reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
127 clocks = <&cpg CPG_MOD 724>,
129 clock-names = "du.0", "dclkin.0";
134 clock-frequency = <16666666>;
138 clock-frequency = <32768>;
142 pinctrl-0 = <&i2c0_pins>;
143 pinctrl-names = "default";
146 clock-frequency = <400000>;
149 compatible = "adi,adv7511w";
150 #sound-dai-cells = <0>;
152 interrupt-parent = <&gpio1>;
153 interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
154 avdd-supply = <&vcc_d1_8v>;
155 dvdd-supply = <&vcc_d1_8v>;
156 pvdd-supply = <&vcc_d1_8v>;
157 bgvdd-supply = <&vcc_d1_8v>;
158 dvdd-3v-supply = <&vcc_d3_3v>;
160 adi,input-depth = <8>;
161 adi,input-colorspace = "rgb";
162 adi,input-clock = "1x";
165 #address-cells = <1>;
170 adv7511_in: endpoint {
171 remote-endpoint = <&thc63lvd1024_out>;
177 adv7511_out: endpoint {
178 remote-endpoint = <&hdmi_con>;
190 lvds0_out: endpoint {
191 remote-endpoint = <&thc63lvd1024_in>;
198 pinctrl-0 = <&mmc_pins>;
199 pinctrl-names = "default";
201 vmmc-supply = <&vcc_d3_3v>;
202 vqmmc-supply = <&vcc_vddq_vin0>;
210 groups = "avb0_mdio", "avb0_rgmii", "avb0_txcrefclk";
220 groups = "mmc_data8", "mmc_ctrl";
222 power-source = <3300>;
226 groups = "qspi0_ctrl", "qspi0_data4";
231 groups = "scif0_data";
237 pinctrl-0 = <&qspi0_pins>;
238 pinctrl-names = "default";
243 compatible = "spansion,s25fs512s", "jedec,spi-nor";
245 spi-max-frequency = <50000000>;
246 spi-rx-bus-width = <4>;
249 compatible = "fixed-partitions";
250 #address-cells = <1>;
254 reg = <0x00000000 0x040000>;
258 reg = <0x00040000 0x080000>;
261 cert_header_sa3@c0000 {
262 reg = <0x000c0000 0x080000>;
266 reg = <0x00140000 0x040000>;
269 cert_header_sa6@180000 {
270 reg = <0x00180000 0x040000>;
274 reg = <0x001c0000 0x460000>;
278 reg = <0x00640000 0x0c0000>;
282 reg = <0x00700000 0x040000>;
286 reg = <0x00740000 0x080000>;
289 reg = <0x007c0000 0x1400000>;
292 reg = <0x01bc0000 0x2440000>;
299 pinctrl-0 = <&scif0_pins>;
300 pinctrl-names = "default";