arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   8 #include "sm8450.dtsi"
   9 #include "pm8350.dtsi"
  10 #include "pm8350b.dtsi"
  11 #include "pm8350c.dtsi"
  12 #include "pm8450.dtsi"
  13 #include "pmk8350.dtsi"
  14 #include "pmr735a.dtsi"
  15
  16 /delete-node/ &adsp_mem;
  17 /delete-node/ &rmtfs_mem;
  18 /delete-node/ &video_mem;
  19
  20 / {
  21         chassis-type = "handset";
  22
  23         aliases {
  24                 serial0 = &uart7;
  25         };
  26
  27         chosen {
  28                 stdout-path = "serial0:115200n8";
  29         };
  30
  31         gpio-keys {
  32                 compatible = "gpio-keys";
  33                 label = "gpio-keys";
  34
  35                 pinctrl-names = "default";
  36                 pinctrl-0 = <&focus_n &snapshot_n &vol_down_n>;
  37
  38                 key-camera-focus {
  39                         label = "Camera Focus";
  40                         linux,code = <KEY_CAMERA_FOCUS>;
  41                         gpios = <&pm8350b_gpios 8 GPIO_ACTIVE_LOW>;
  42                         debounce-interval = <15>;
  43                         linux,can-disable;
  44                         wakeup-source;
  45                 };
  46
  47                 key-camera-snapshot {
  48                         label = "Camera Snapshot";
  49                         linux,code = <KEY_CAMERA>;
  50                         gpios = <&pm8350b_gpios 5 GPIO_ACTIVE_LOW>;
  51                         debounce-interval = <15>;
  52                         linux,can-disable;
  53                         wakeup-source;
  54                 };
  55
  56                 key-volume-down {
  57                         label = "Volume Down";
  58                         linux,code = <KEY_VOLUMEDOWN>;
  59                         gpios = <&pm8350_gpios 6 GPIO_ACTIVE_LOW>;
  60                         debounce-interval = <15>;
  61                         linux,can-disable;
  62                         wakeup-source;
  63                 };
  64         };
  65
  66         reserved-memory {
  67                 adsp_mem: memory@85700000 {
  68                         reg = <0x0 0x85700000 0x0 0x2800000>;
  69                         no-map;
  70                 };
  71
  72                 video_mem: memory@9fd00000 {
  73                         reg = <0x0 0x9fd00000 0x0 0x700000>;
  74                         no-map;
  75                 };
  76
  77                 rmtfs_mem: memory@f3300000 {
  78                         compatible = "qcom,rmtfs-mem";
  79                         reg = <0x0 0xf3300000 0x0 0x280000>;
  80                         no-map;
  81
  82                         qcom,client-id = <1>;
  83                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
  84                 };
  85
  86                 ramoops@ffc00000 {
  87                         compatible = "ramoops";
  88                         reg = <0 0xffc00000 0 0x200000>;
  89                         console-size = <0x40000>;
  90                         record-size = <0x1000>;
  91                         ecc-size = <16>;
  92                         no-map;
  93                 };
  94         };
  95
  96         /* Sadly, the voltages for these GPIO regulators are unknown. */
  97         imx650_vana_regulator: imx650-vana-regulator {
  98                 compatible = "regulator-fixed";
  99                 regulator-name = "imx650_vana_regulator";
 100                 gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
 101                 enable-active-high;
 102
 103                 pinctrl-names = "default";
 104                 pinctrl-0 = <&telec_pwr_en>;
 105         };
 106
 107         vph_pwr: vph-pwr-regulator {
 108                 compatible = "regulator-fixed";
 109                 regulator-name = "vph_pwr";
 110                 regulator-min-microvolt = <3700000>;
 111                 regulator-max-microvolt = <3700000>;
 112
 113                 regulator-always-on;
 114                 regulator-boot-on;
 115         };
 116 };
 117
 118 &apps_rsc {
 119         regulators-0 {
 120                 compatible = "qcom,pm8350-rpmh-regulators";
 121                 qcom,pmic-id = "b";
 122
 123                 vdd-s1-supply = <&vph_pwr>;
 124                 vdd-s2-supply = <&vph_pwr>;
 125                 vdd-s3-supply = <&vph_pwr>;
 126                 vdd-s4-supply = <&vph_pwr>;
 127                 vdd-s5-supply = <&vph_pwr>;
 128                 vdd-s6-supply = <&vph_pwr>;
 129                 vdd-s7-supply = <&vph_pwr>;
 130                 vdd-s8-supply = <&vph_pwr>;
 131                 vdd-s9-supply = <&vph_pwr>;
 132                 vdd-s10-supply = <&vph_pwr>;
 133                 vdd-s11-supply = <&vph_pwr>;
 134                 vdd-s12-supply = <&vph_pwr>;
 135
 136                 vdd-l1-l4-supply = <&pm8350_s11>;
 137                 vdd-l2-l7-supply = <&vreg_bob>;
 138                 vdd-l3-l5-supply = <&vreg_bob>;
 139                 vdd-l6-l9-l10-supply = <&pm8350_s12>;
 140
 141                 /*
 142                  * ARC regulators:
 143                  * s5 - gfx.lvl
 144                  * l8 - lcx.lvl
 145                  */
 146
 147                 pm8350_s10: smps10 {
 148                         regulator-name = "pm8350_s10";
 149                         regulator-min-microvolt = <1800000>;
 150                         regulator-max-microvolt = <1800000>;
 151                 };
 152
 153                 pm8350_s11: smps11 {
 154                         regulator-name = "pm8350_s11";
 155                         regulator-min-microvolt = <848000>;
 156                         regulator-max-microvolt = <1104000>;
 157                 };
 158
 159                 pm8350_s12: smps12 {
 160                         regulator-name = "pm8350_s12";
 161                         regulator-min-microvolt = <1224000>;
 162                         regulator-max-microvolt = <1400000>;
 163                 };
 164
 165                 pm8350_l1: ldo1 {
 166                         regulator-name = "pm8350_l1";
 167                         regulator-min-microvolt = <912000>;
 168                         regulator-max-microvolt = <920000>;
 169                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 170                 };
 171
 172                 pm8350_l2: ldo2 {
 173                         regulator-name = "pm8350_l2";
 174                         regulator-min-microvolt = <3072000>;
 175                         regulator-max-microvolt = <3072000>;
 176                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 177                 };
 178
 179                 pm8350_l3: ldo3 {
 180                         regulator-name = "pm8350_l3";
 181                         regulator-min-microvolt = <904000>;
 182                         regulator-max-microvolt = <904000>;
 183                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 184                 };
 185
 186                 pm8350_l5: ldo5 {
 187                         regulator-name = "pm8350_l5";
 188                         regulator-min-microvolt = <880000>;
 189                         regulator-max-microvolt = <912000>;
 190                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 191                 };
 192
 193                 pm8350_l6: ldo6 {
 194                         regulator-name = "pm8350_l6";
 195                         regulator-min-microvolt = <1200000>;
 196                         regulator-max-microvolt = <1200000>;
 197                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 198                 };
 199
 200                 pm8350_l7: ldo7 {
 201                         regulator-name = "pm8350_l7";
 202                         regulator-min-microvolt = <2504000>;
 203                         regulator-max-microvolt = <2504000>;
 204                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 205                 };
 206
 207                 pm8350_l9: ldo9 {
 208                         regulator-name = "pm8350_l9";
 209                         regulator-min-microvolt = <1200000>;
 210                         regulator-max-microvolt = <1200000>;
 211                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 212                 };
 213         };
 214
 215         regulators-1 {
 216                 compatible = "qcom,pm8350c-rpmh-regulators";
 217                 qcom,pmic-id = "c";
 218
 219                 vdd-s1-supply = <&vph_pwr>;
 220                 vdd-s2-supply = <&vph_pwr>;
 221                 vdd-s3-supply = <&vph_pwr>;
 222                 vdd-s4-supply = <&vph_pwr>;
 223                 vdd-s5-supply = <&vph_pwr>;
 224                 vdd-s6-supply = <&vph_pwr>;
 225                 vdd-s7-supply = <&vph_pwr>;
 226                 vdd-s8-supply = <&vph_pwr>;
 227                 vdd-s9-supply = <&vph_pwr>;
 228                 vdd-s10-supply = <&vph_pwr>;
 229
 230                 vdd-l1-l12-supply = <&vreg_bob>;
 231                 vdd-l2-l8-supply = <&vreg_bob>;
 232                 vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
 233                 vdd-l6-l9-l11-supply = <&vreg_bob>;
 234                 vdd-l10-supply = <&pm8350_s12>;
 235
 236                 vdd-bob-supply = <&vph_pwr>;
 237
 238                 /*
 239                  * ARC regulators:
 240                  * s2 - mxc.lvl
 241                  * s4 - mss.lvl
 242                  * s6 - cx.lvl
 243                  */
 244
 245                 pm8350c_s1: smps1 {
 246                         regulator-name = "pm8350c_s1";
 247                         regulator-min-microvolt = <1800000>;
 248                         regulator-max-microvolt = <2024000>;
 249                 };
 250
 251                 pm8350c_s10: smps10 {
 252                         regulator-name = "pm8350c_s10";
 253                         regulator-min-microvolt = <1000000>;
 254                         regulator-max-microvolt = <1100000>;
 255                 };
 256
 257                 vreg_bob: bob {
 258                         regulator-name = "vreg_bob";
 259                         regulator-min-microvolt = <3400000>;
 260                         regulator-max-microvolt = <3960000>;
 261                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 262                 };
 263
 264                 pm8350c_l1: ldo1 {
 265                         regulator-name = "pm8350c_l1";
 266                         regulator-min-microvolt = <1800000>;
 267                         regulator-max-microvolt = <1800000>;
 268                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 269                 };
 270
 271                 pm8350c_l2: ldo2 {
 272                         regulator-name = "pm8350c_l2";
 273                         regulator-min-microvolt = <1800000>;
 274                         regulator-max-microvolt = <1800000>;
 275                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 276                 };
 277
 278                 pm8350c_l3: ldo3 {
 279                         regulator-name = "pm8350c_l3";
 280                         regulator-min-microvolt = <3296000>;
 281                         regulator-max-microvolt = <3304000>;
 282                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 283                 };
 284
 285                 pm8350c_l4: ldo4 {
 286                         regulator-name = "pm8350c_l4";
 287                         regulator-min-microvolt = <1704000>;
 288                         regulator-max-microvolt = <3000000>;
 289                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 290                 };
 291
 292                 pm8350c_l5: ldo5 {
 293                         regulator-name = "pm8350c_l5";
 294                         regulator-min-microvolt = <1704000>;
 295                         regulator-max-microvolt = <3000000>;
 296                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 297                 };
 298
 299                 pm8350c_l6: ldo6 {
 300                         regulator-name = "pm8350c_l6";
 301                         regulator-min-microvolt = <2960000>;
 302                         /* Originally max = 3008000 but SDHCI expects 2960000 */
 303                         regulator-max-microvolt = <2960000>;
 304                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 305                 };
 306
 307                 pm8350c_l7: ldo7 {
 308                         regulator-name = "pm8350c_l7";
 309                         regulator-min-microvolt = <3008000>;
 310                         regulator-max-microvolt = <3008000>;
 311                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 312                 };
 313
 314                 pm8350c_l8: ldo8 {
 315                         regulator-name = "pm8350c_l8";
 316                         regulator-min-microvolt = <1800000>;
 317                         regulator-max-microvolt = <1800000>;
 318                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 319                 };
 320
 321                 pm8350c_l9: ldo9 {
 322                         regulator-name = "pm8350c_l9";
 323                         regulator-min-microvolt = <2960000>;
 324                         /* Originally max = 3008000 but SDHCI expects 2960000 */
 325                         regulator-max-microvolt = <2960000>;
 326                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 327                 };
 328
 329                 pm8350c_l10: ldo10 {
 330                         regulator-name = "pm8350c_l10";
 331                         regulator-min-microvolt = <1200000>;
 332                         regulator-max-microvolt = <1200000>;
 333                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 334                 };
 335
 336                 pm8350c_l12: ldo12 {
 337                         regulator-name = "pm8350c_l12";
 338                         regulator-min-microvolt = <1800000>;
 339                         regulator-max-microvolt = <1968000>;
 340                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 341                 };
 342
 343                 pm8350c_l13: ldo13 {
 344                         regulator-name = "pm8350c_l13";
 345                         regulator-min-microvolt = <3000000>;
 346                         regulator-max-microvolt = <3000000>;
 347                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 348                 };
 349         };
 350
 351         regulators-2 {
 352                 compatible = "qcom,pm8450-rpmh-regulators";
 353                 qcom,pmic-id = "h";
 354
 355                 vdd-s1-supply = <&vph_pwr>;
 356                 vdd-s2-supply = <&vph_pwr>;
 357                 vdd-s3-supply = <&vph_pwr>;
 358                 vdd-s4-supply = <&vph_pwr>;
 359                 vdd-s5-supply = <&vph_pwr>;
 360                 vdd-s6-supply = <&vph_pwr>;
 361
 362                 vdd-l2-supply = <&vreg_bob>;
 363                 vdd-l3-supply = <&vreg_bob>;
 364                 vdd-l4-supply = <&vreg_bob>;
 365
 366                 /*
 367                  * ARC regulators:
 368                  * S2 - ebi.lvl
 369                  * S4 - mmcx.lvl
 370                  * S6 - mx.lvl
 371                  * L1 - lmx.lvl
 372                  */
 373
 374                 pm8450_s3: smps3 {
 375                         regulator-name = "pm8450_s3";
 376                         regulator-min-microvolt = <500000>;
 377                         regulator-max-microvolt = <600000>;
 378                 };
 379
 380                 pm8450_l2: ldo2 {
 381                         regulator-name = "pm8450_l2";
 382                         regulator-min-microvolt = <880000>;
 383                         regulator-max-microvolt = <912000>;
 384                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 385                 };
 386
 387                 pm8450_l3: ldo3 {
 388                         regulator-name = "pm8450_l3";
 389                         regulator-min-microvolt = <912000>;
 390                         regulator-max-microvolt = <912000>;
 391                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 392                 };
 393         };
 394
 395         regulators-3 {
 396                 compatible = "qcom,pmr735a-rpmh-regulators";
 397                 qcom,pmic-id = "e";
 398
 399                 vdd-s1-supply = <&vph_pwr>;
 400                 vdd-s2-supply = <&vph_pwr>;
 401                 vdd-s3-supply = <&vph_pwr>;
 402
 403                 vdd-l1-l2-supply = <&pmr735a_s2>;
 404                 vdd-l3-supply = <&pmr735a_s1>;
 405                 vdd-l4-supply = <&pm8350c_s1>;
 406                 vdd-l5-l6-supply = <&pm8350c_s1>;
 407                 vdd-l7-bob-supply = <&vreg_bob>;
 408
 409                 pmr735a_s1: smps1 {
 410                         regulator-name = "pmr735a_s1";
 411                         regulator-min-microvolt = <1200000>;
 412                         regulator-max-microvolt = <1296000>;
 413                 };
 414
 415                 pmr735a_s2: smps2 {
 416                         regulator-name = "pmr735a_s2";
 417                         regulator-min-microvolt = <500000>;
 418                         regulator-max-microvolt = <1040000>;
 419                 };
 420
 421                 pmr735a_s3: smps3 {
 422                         regulator-name = "pmr735a_s3";
 423                         regulator-min-microvolt = <435000>;
 424                         regulator-max-microvolt = <2352000>;
 425                 };
 426
 427                 pmr735a_l1: ldo1 {
 428                         regulator-name = "pmr735a_l1";
 429                         regulator-min-microvolt = <800000>;
 430                         regulator-max-microvolt = <800000>;
 431                 };
 432
 433                 pmr735a_l2: ldo2 {
 434                         regulator-name = "pmr735a_l2";
 435                         regulator-min-microvolt = <480000>;
 436                         regulator-max-microvolt = <912000>;
 437                 };
 438
 439                 pmr735a_l3: ldo3 {
 440                         regulator-name = "pmr735a_l3";
 441                         regulator-min-microvolt = <1200000>;
 442                         regulator-max-microvolt = <1200000>;
 443                 };
 444
 445                 pmr735a_l4: ldo4 {
 446                         regulator-name = "pmr735a_l4";
 447                         regulator-min-microvolt = <1776000>;
 448                         regulator-max-microvolt = <1776000>;
 449                 };
 450
 451                 pmr735a_l5: ldo5 {
 452                         regulator-name = "pmr735a_l5";
 453                         regulator-min-microvolt = <880000>;
 454                         regulator-max-microvolt = <880000>;
 455                 };
 456
 457                 pmr735a_l6: ldo6 {
 458                         regulator-name = "pmr735a_l6";
 459                         regulator-min-microvolt = <1200000>;
 460                         regulator-max-microvolt = <1200000>;
 461                 };
 462
 463                 pmr735a_l7: ldo7 {
 464                         regulator-name = "pmr735a_l7";
 465                         regulator-min-microvolt = <2800000>;
 466                         regulator-max-microvolt = <2800000>;
 467                 };
 468         };
 469 };
 470
 471 &gpi_dma0 {
 472         status = "okay";
 473 };
 474
 475 &gpi_dma1 {
 476         status = "okay";
 477 };
 478
 479 &gpi_dma2 {
 480         status = "okay";
 481 };
 482
 483 &i2c4 {
 484         clock-frequency = <400000>;
 485         status = "okay";
 486
 487         touchscreen@48 {
 488                 compatible = "samsung,s6sy761";
 489                 reg = <0x48>;
 490                 interrupt-parent = <&tlmm>;
 491                 interrupts = <21 0x2008>;
 492                 vdd-supply = <&pm8350c_l2>;
 493                 avdd-supply = <&pm8350c_l3>;
 494
 495                 pinctrl-names = "default";
 496                 pinctrl-0 = <&ts_reset_default &ts_int_default>;
 497         };
 498 };
 499
 500 &i2c5 {
 501         clock-frequency = <400000>;
 502         status = "okay";
 503
 504         pmic@75 {
 505                 compatible = "dlg,slg51000";
 506                 reg = <0x75>;
 507                 dlg,cs-gpios = <&pm8350b_gpios 1 GPIO_ACTIVE_HIGH>;
 508
 509                 pinctrl-names = "default";
 510                 pinctrl-0 = <&cam_pwr_a_cs>;
 511
 512                 regulators {
 513                         slg51000_a_ldo1: ldo1 {
 514                                 regulator-name = "slg51000_a_ldo1";
 515                                 regulator-min-microvolt = <2400000>;
 516                                 regulator-max-microvolt = <3300000>;
 517                         };
 518
 519                         slg51000_a_ldo2: ldo2 {
 520                                 regulator-name = "slg51000_a_ldo2";
 521                                 regulator-min-microvolt = <2400000>;
 522                                 regulator-max-microvolt = <3300000>;
 523                         };
 524
 525                         slg51000_a_ldo3: ldo3 {
 526                                 regulator-name = "slg51000_a_ldo3";
 527                                 regulator-min-microvolt = <1200000>;
 528                                 regulator-max-microvolt = <3750000>;
 529                         };
 530
 531                         slg51000_a_ldo4: ldo4 {
 532                                 regulator-name = "slg51000_a_ldo4";
 533                                 regulator-min-microvolt = <1200000>;
 534                                 regulator-max-microvolt = <3750000>;
 535                         };
 536
 537                         slg51000_a_ldo5: ldo5 {
 538                                 regulator-name = "slg51000_a_ldo5";
 539                                 regulator-min-microvolt = <500000>;
 540                                 regulator-max-microvolt = <1200000>;
 541                         };
 542
 543                         slg51000_a_ldo6: ldo6 {
 544                                 regulator-name = "slg51000_a_ldo6";
 545                                 regulator-min-microvolt = <500000>;
 546                                 regulator-max-microvolt = <1200000>;
 547                         };
 548
 549                         slg51000_a_ldo7: ldo7 {
 550                                 regulator-name = "slg51000_a_ldo7";
 551                                 regulator-min-microvolt = <1200000>;
 552                                 regulator-max-microvolt = <3750000>;
 553                         };
 554                 };
 555         };
 556 };
 557
 558 &i2c9 {
 559         clock-frequency = <400000>;
 560         status = "okay";
 561
 562         /* NXP SN1X0 NFC @ 28 */
 563 };
 564
 565 &i2c14 {
 566         clock-frequency = <1000000>;
 567         status = "okay";
 568
 569         cs35l41_l: speaker-amp@40 {
 570                 compatible = "cirrus,cs35l41";
 571                 reg = <0x40>;
 572                 interrupt-parent = <&tlmm>;
 573                 interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
 574                 reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
 575                 cirrus,boost-peak-milliamp = <4000>;
 576                 cirrus,boost-ind-nanohenry = <1000>;
 577                 cirrus,boost-cap-microfarad = <15>;
 578                 cirrus,gpio2-src-select = <2>;
 579                 cirrus,gpio2-output-enable;
 580                 cirrus,asp-sdout-hiz = <3>;
 581                 #sound-dai-cells = <1>;
 582         };
 583
 584         cs35l41_r: speaker-amp@41 {
 585                 compatible = "cirrus,cs35l41";
 586                 reg = <0x41>;
 587                 interrupt-parent = <&tlmm>;
 588                 interrupts = <182 IRQ_TYPE_LEVEL_LOW>;
 589                 reset-gpios = <&tlmm 183 GPIO_ACTIVE_HIGH>;
 590                 cirrus,boost-peak-milliamp = <4000>;
 591                 cirrus,boost-ind-nanohenry = <1000>;
 592                 cirrus,boost-cap-microfarad = <15>;
 593                 cirrus,gpio2-src-select = <2>;
 594                 cirrus,gpio2-output-enable;
 595                 cirrus,asp-sdout-hiz = <3>;
 596                 #sound-dai-cells = <1>;
 597         };
 598 };
 599
 600 &i2c15 {
 601         clock-frequency = <400000>;
 602         status = "okay";
 603
 604         /* AMS TCS3490 RGB+IR color sensor @ 72 */
 605 };
 606
 607 &i2c19 {
 608         clock-frequency = <1000000>;
 609         status = "okay";
 610
 611         /* Cirrus Logic CS40L25A boosted haptics driver @ 40 */
 612 };
 613
 614 &pcie0 {
 615         max-link-speed = <2>;
 616         status = "okay";
 617 };
 618
 619 &pcie0_phy {
 620         vdda-phy-supply = <&pm8350_l5>;
 621         vdda-pll-supply = <&pm8350_l6>;
 622         status = "okay";
 623 };
 624
 625 &pm8350_gpios {
 626         gpio-line-names = "ASSIGN1_THERM", /* GPIO_1 */
 627                           "LCD_ID",
 628                           "SDR_MMW_THERM",
 629                           "RF_ID",
 630                           "NC",
 631                           "VOL_DOWN_N",
 632                           "NC",
 633                           "NC",
 634                           "NC",
 635                           "PM8350_OPTION"; /* GPIO_10 */
 636
 637         vol_down_n: vol-down-n-state {
 638                 pins = "gpio6";
 639                 function = "normal";
 640                 power-source = <1>;
 641                 bias-pull-up;
 642                 input-enable;
 643         };
 644 };
 645
 646 &pm8350b_gpios {
 647         cam_pwr_a_cs: cam-pwr-a-cs-state {
 648                 pins = "gpio1";
 649                 function = "normal";
 650                 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 651                 power-source = <1>;
 652                 drive-push-pull;
 653                 output-high;
 654         };
 655
 656         snapshot_n: snapshot-n-state {
 657                 pins = "gpio5";
 658                 function = "normal";
 659                 power-source = <0>;
 660                 bias-pull-up;
 661                 input-enable;
 662         };
 663
 664         focus_n: focus-n-state {
 665                 pins = "gpio8";
 666                 function = "normal";
 667                 power-source = <0>;
 668                 bias-pull-up;
 669                 input-enable;
 670         };
 671 };
 672
 673 &pm8450_gpios {
 674         gpio-line-names = "FP_LDO_EN", /* GPIO_1 */
 675                           "",
 676                           "",
 677                           "";
 678 };
 679
 680 &pmk8350_gpios {
 681         gpio-line-names = "NC", /* GPIO_1 */
 682                           "NC",
 683                           "DISP_THERM",
 684                           "PMK8350_OPTION";
 685 };
 686
 687 &pon_pwrkey {
 688         status = "okay";
 689 };
 690
 691 &pon_resin {
 692         linux,code = <KEY_VOLUMEUP>;
 693         status = "okay";
 694 };
 695
 696 &remoteproc_adsp {
 697         firmware-name = "/*(DEBLOBBED)*/";
 698         status = "okay";
 699 };
 700
 701 &remoteproc_cdsp {
 702         firmware-name = "/*(DEBLOBBED)*/";
 703         status = "okay";
 704 };
 705
 706 &remoteproc_slpi {
 707         firmware-name = "/*(DEBLOBBED)*/";
 708         status = "okay";
 709 };
 710
 711 &qupv3_id_0 {
 712         status = "okay";
 713 };
 714
 715 &qupv3_id_1 {
 716         status = "okay";
 717 };
 718
 719 &qupv3_id_2 {
 720         status = "okay";
 721 };
 722
 723 &sdhc_2 {
 724         cd-gpios = <&tlmm 92 GPIO_ACTIVE_HIGH>;
 725         pinctrl-names = "default", "sleep";
 726         pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
 727         pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>;
 728         vmmc-supply = <&pm8350c_l9>;
 729         vqmmc-supply = <&pm8350c_l6>;
 730         no-sdio;
 731         no-mmc;
 732         status = "okay";
 733 };
 734
 735 &spi10 {
 736         status = "okay";
 737
 738         /* NXP SN1X0 NFC Secure Element @ 0 */
 739 };
 740
 741 &tlmm {
 742         gpio-reserved-ranges = <28 4>;
 743
 744         ts_reset_default: ts-reset-default-state {
 745                 pins = "gpio20";
 746                 function = "gpio";
 747                 drive-strength = <2>;
 748                 bias-disable;
 749                 output-high;
 750         };
 751
 752         ts_int_default: ts-int-default-state {
 753                 pins = "gpio21";
 754                 function = "gpio";
 755                 drive-strength = <2>;
 756                 bias-disable;
 757         };
 758
 759         telec_pwr_en: telec-pwr-en-state {
 760                 pins = "gpio23";
 761                 function = "gpio";
 762                 drive-strength = <2>;
 763                 bias-disable;
 764                 output-low;
 765         };
 766
 767         sdc2_card_det_n: sd-card-det-n-state {
 768                 pins = "gpio92";
 769                 function = "gpio";
 770                 drive-strength = <2>;
 771                 bias-pull-up;
 772         };
 773 };
 774
 775 &uart7 {
 776         status = "okay";
 777 };
 778
 779 &usb_1 {
 780         status = "okay";
 781 };
 782
 783 &usb_1_dwc3 {
 784         dr_mode = "peripheral";
 785 };
 786
 787 &usb_1_hsphy {
 788         vdda-pll-supply = <&pm8350_l5>;
 789         vdda18-supply = <&pm8350c_l1>;
 790         vdda33-supply = <&pm8350_l2>;
 791         status = "okay";
 792 };
 793
 794 &usb_1_qmpphy {
 795         vdda-phy-supply = <&pm8350_l6>;
 796         vdda-pll-supply = <&pm8350_l1>;
 797         status = "okay";
 798 };