arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, 2023 Jianhua Lu <lujianhua000@gmail.com>
   4  */
   5
   6 #include <dt-bindings/arm/qcom,ids.h>
   7 #include <dt-bindings/phy/phy.h>
   8 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   9 #include "sm8250.dtsi"
  10 #include "pm8150.dtsi"
  11 #include "pm8150b.dtsi"
  12 #include "pm8150l.dtsi"
  13 #include "pm8009.dtsi"
  14
  15 /*
  16  * Delete following upstream (sm8250.dtsi) reserved
  17  * memory mappings which are different on this device.
  18  */
  19 /delete-node/ &adsp_mem;
  20 /delete-node/ &cdsp_secure_heap;
  21 /delete-node/ &slpi_mem;
  22 /delete-node/ &spss_mem;
  23 /delete-node/ &xbl_aop_mem;
  24
  25 / {
  26         classis-type = "tablet";
  27
  28         /* required for bootloader to select correct board */
  29         qcom,msm-id = <QCOM_ID_SM8250 0x20001>; /* SM8250 v2.1 */
  30         qcom,board-id = <0x10008 0>;
  31
  32         chosen {
  33                 #address-cells = <2>;
  34                 #size-cells = <2>;
  35                 ranges;
  36
  37                 framebuffer: framebuffer@9c000000 {
  38                         compatible = "simple-framebuffer";
  39                         reg = <0x0 0x9c000000 0x0 0x2300000>;
  40                         width = <1600>;
  41                         height = <2560>;
  42                         stride = <(1600 * 4)>;
  43                         format = "a8r8g8b8";
  44                 };
  45         };
  46
  47         battery_l: battery-l {
  48                 compatible = "simple-battery";
  49                 voltage-min-design-microvolt = <3870000>;
  50                 energy-full-design-microwatt-hours = <16600000>;
  51                 charge-full-design-microamp-hours = <4300000>;
  52         };
  53
  54         battery_r: battery-r {
  55                 compatible = "simple-battery";
  56                 voltage-min-design-microvolt = <3870000>;
  57                 energy-full-design-microwatt-hours = <16600000>;
  58                 charge-full-design-microamp-hours = <4300000>;
  59         };
  60
  61         bl_vddpos_5p5: bl-vddpos-regulator {
  62                 compatible = "regulator-fixed";
  63                 regulator-name = "bl_vddpos_5p5";
  64                 regulator-min-microvolt = <5500000>;
  65                 regulator-max-microvolt = <5500000>;
  66                 regulator-enable-ramp-delay = <233>;
  67                 gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
  68                 enable-active-high;
  69                 regulator-boot-on;
  70         };
  71
  72         bl_vddneg_5p5: bl-vddneg-regulator {
  73                 compatible = "regulator-fixed";
  74                 regulator-name = "bl_vddneg_5p5";
  75                 regulator-min-microvolt = <5500000>;
  76                 regulator-max-microvolt = <5500000>;
  77                 regulator-enable-ramp-delay = <233>;
  78                 gpio = <&tlmm 131 GPIO_ACTIVE_HIGH>;
  79                 enable-active-high;
  80                 regulator-boot-on;
  81         };
  82
  83         gpio_keys: gpio-keys {
  84                 compatible = "gpio-keys";
  85
  86                 pinctrl-names = "default";
  87                 pinctrl-0 = <&vol_up_n>;
  88
  89                 key-vol-up {
  90                         label = "Volume Up";
  91                         gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
  92                         linux,code = <KEY_VOLUMEUP>;
  93                         debounce-interval = <15>;
  94                         linux,can-disable;
  95                         wakeup-source;
  96                 };
  97         };
  98
  99         vph_pwr: vph-pwr-regulator {
 100                 compatible = "regulator-fixed";
 101                 regulator-name = "vph_pwr";
 102                 regulator-min-microvolt = <3700000>;
 103                 regulator-max-microvolt = <3700000>;
 104         };
 105
 106         /* S6c is really ebi.lvl but it's there for supply map completeness sake. */
 107         vreg_s6c_0p88: smpc6-regulator {
 108                 compatible = "regulator-fixed";
 109                 regulator-name = "vreg_s6c_0p88";
 110                 regulator-min-microvolt = <880000>;
 111                 regulator-max-microvolt = <880000>;
 112                 regulator-always-on;
 113                 vin-supply = <&vph_pwr>;
 114         };
 115
 116         reserved-memory {
 117                 xbl_aop_mem: xbl-aop@80700000 {
 118                         reg = <0x0 0x80600000 0x0 0x260000>;
 119                         no-map;
 120                 };
 121
 122                 slpi_mem: slpi@88c00000 {
 123                         reg = <0x0 0x88c00000 0x0 0x2f00000>;
 124                         no-map;
 125                 };
 126
 127                 adsp_mem: adsp@8bb00000 {
 128                         reg = <0x0 0x8bb00000 0x0 0x2500000>;
 129                         no-map;
 130                 };
 131
 132                 spss_mem: spss@8e000000 {
 133                         reg = <0x0 0x8e000000 0x0 0x100000>;
 134                         no-map;
 135                 };
 136
 137                 cdsp_secure_heap: cdsp-secure-heap@8e100000 {
 138                         reg = <0x0 0x8e100000 0x0 0x4600000>;
 139                         no-map;
 140                 };
 141
 142                 cont_splash_mem: cont-splash@9c000000 {
 143                         reg = <0x0 0x9c000000 0x0 0x2300000>;
 144                         no-map;
 145                 };
 146
 147                 ramoops@b0000000 {
 148                         compatible = "ramoops";
 149                         reg = <0x0 0xb0000000 0x0 0x400000>;
 150                         record-size = <0x1000>;
 151                         console-size = <0x200000>;
 152                         ecc-size = <16>;
 153                         no-map;
 154                 };
 155         };
 156 };
 157
 158 &adsp {
 159         firmware-name = "/*(DEBLOBBED)*/";
 160         status = "okay";
 161 };
 162
 163 &apps_rsc {
 164         regulators-0 {
 165                 compatible = "qcom,pm8150-rpmh-regulators";
 166                 qcom,pmic-id = "a";
 167
 168                 vdd-s1-supply = <&vph_pwr>;
 169                 vdd-s2-supply = <&vph_pwr>;
 170                 vdd-s3-supply = <&vph_pwr>;
 171                 vdd-s4-supply = <&vph_pwr>;
 172                 vdd-s5-supply = <&vph_pwr>;
 173                 vdd-s6-supply = <&vph_pwr>;
 174                 vdd-s7-supply = <&vph_pwr>;
 175                 vdd-s8-supply = <&vph_pwr>;
 176                 vdd-s9-supply = <&vph_pwr>;
 177                 vdd-s10-supply = <&vph_pwr>;
 178                 vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>;
 179                 vdd-l2-l10-supply = <&vreg_bob>;
 180                 vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p95>;
 181                 vdd-l6-l9-supply = <&vreg_s8c_1p35>;
 182                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 183                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 184
 185                 /* (S1+S2+S3) - cx.lvl (ARC) */
 186
 187                 vreg_s4a_1p8: smps4 {
 188                         regulator-name = "vreg_s4a_1p8";
 189                         regulator-min-microvolt = <1800000>;
 190                         regulator-max-microvolt = <1920000>;
 191                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 192                         regulator-allow-set-load;
 193                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 194                                                    RPMH_REGULATOR_MODE_HPM>;
 195                 };
 196
 197                 vreg_s5a_1p9: smps5 {
 198                         regulator-name = "vreg_s5a_1p9";
 199                         regulator-min-microvolt = <1900000>;
 200                         regulator-max-microvolt = <2040000>;
 201                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 202                 };
 203
 204                 vreg_s6a_0p95: smps6 {
 205                         regulator-name = "vreg_s6a_0p95";
 206                         regulator-min-microvolt = <950000>;
 207                         regulator-max-microvolt = <1128000>;
 208                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 209                 };
 210
 211                 vreg_l2a_3p1: ldo2 {
 212                         regulator-name = "vreg_l2a_3p1";
 213                         regulator-min-microvolt = <3072000>;
 214                         regulator-max-microvolt = <3072000>;
 215                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 216                 };
 217
 218                 vreg_l3a_0p9: ldo3 {
 219                         regulator-name = "vreg_l3a_0p9";
 220                         regulator-min-microvolt = <928000>;
 221                         regulator-max-microvolt = <932000>;
 222                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 223                 };
 224
 225                 /* L4 - lmx.lvl (ARC) */
 226
 227                 vreg_l5a_0p88: ldo5 {
 228                         regulator-name = "vreg_l5a_0p88";
 229                         regulator-min-microvolt = <880000>;
 230                         regulator-max-microvolt = <880000>;
 231                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 232                 };
 233
 234                 vreg_l6a_1p2: ldo6 {
 235                         regulator-name = "vreg_l6a_1p2";
 236                         regulator-min-microvolt = <1200000>;
 237                         regulator-max-microvolt = <1200000>;
 238                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 239                         regulator-allow-set-load;
 240                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 241                                                    RPMH_REGULATOR_MODE_HPM>;
 242                 };
 243
 244                 /* L7 is unused. */
 245
 246                 vreg_l9a_1p2: ldo9 {
 247                         regulator-name = "vreg_l9a_1p2";
 248                         regulator-min-microvolt = <1200000>;
 249                         regulator-max-microvolt = <1200000>;
 250                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 251                 };
 252
 253                 /* L10 is unused, L11 - lcx.lvl (ARC) */
 254
 255                 vreg_l12a_1p8: ldo12 {
 256                         regulator-name = "vreg_l12a_1p8";
 257                         regulator-min-microvolt = <1800000>;
 258                         regulator-max-microvolt = <1800000>;
 259                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 260                 };
 261
 262                 /* L13 is unused. */
 263
 264                 vreg_l14a_1p88: ldo14 {
 265                         regulator-name = "vreg_l14a_1p88";
 266                         regulator-min-microvolt = <1880000>;
 267                         regulator-max-microvolt = <1880000>;
 268                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 269                 };
 270
 271                 /* L15 & L16 are unused. */
 272
 273                 vreg_l17a_3p0: ldo17 {
 274                         regulator-name = "vreg_l17a_3p0";
 275                         regulator-min-microvolt = <2496000>;
 276                         regulator-max-microvolt = <3008000>;
 277                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 278                         regulator-allow-set-load;
 279                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 280                                                    RPMH_REGULATOR_MODE_HPM>;
 281                 };
 282
 283                 vreg_l18a_0p9: ldo18 {
 284                         regulator-name = "vreg_l18a_0p9";
 285                         regulator-min-microvolt = <800000>;
 286                         regulator-max-microvolt = <920000>;
 287                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 288                 };
 289         };
 290
 291         /*
 292          * Remaining regulators that are not yet supported:
 293          * OLEDB: 4925000-8100000
 294          * ab: 4600000-6100000
 295          * ibb: 800000-5400000
 296          */
 297         regulators-1 {
 298                 compatible = "qcom,pm8150l-rpmh-regulators";
 299                 qcom,pmic-id = "c";
 300
 301                 vdd-s1-supply = <&vph_pwr>;
 302                 vdd-s2-supply = <&vph_pwr>;
 303                 vdd-s3-supply = <&vph_pwr>;
 304                 vdd-s4-supply = <&vph_pwr>;
 305                 vdd-s5-supply = <&vph_pwr>;
 306                 vdd-s6-supply = <&vph_pwr>;
 307                 vdd-s7-supply = <&vph_pwr>;
 308                 vdd-s8-supply = <&vph_pwr>;
 309                 vdd-l1-l8-supply = <&vreg_s4a_1p8>;
 310                 vdd-l2-l3-supply = <&vreg_s8c_1p35>;
 311                 vdd-l4-l5-l6-supply = <&vreg_bob>;
 312                 vdd-l7-l11-supply = <&vreg_bob>;
 313                 vdd-l9-l10-supply = <&vreg_bob>;
 314                 vdd-bob-supply = <&vph_pwr>;
 315
 316                 vreg_bob: bob {
 317                         regulator-name = "vreg_bob";
 318                         regulator-min-microvolt = <3350000>;
 319                         regulator-max-microvolt = <3960000>;
 320                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 321                 };
 322
 323                 /*
 324                  * S1-S6 are ARCs:
 325                  * (S1+S2) - gfx.lvl,
 326                  * S3 - mx.lvl,
 327                  * (S4+S5) - mmcx.lvl,
 328                  * S6 - ebi.lvl
 329                  */
 330
 331                 vreg_s7c_0p35: smps7 {
 332                         regulator-name = "vreg_s7c_0p35";
 333                         regulator-min-microvolt = <348000>;
 334                         regulator-max-microvolt = <1000000>;
 335                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 336                 };
 337
 338                 vreg_s8c_1p35: smps8 {
 339                         regulator-name = "vreg_s8c_1p35";
 340                         regulator-min-microvolt = <1350000>;
 341                         regulator-max-microvolt = <1400000>;
 342                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 343                 };
 344
 345                 vreg_l1c_1p8: ldo1 {
 346                         regulator-name = "vreg_l1c_1p8";
 347                         regulator-min-microvolt = <1800000>;
 348                         regulator-max-microvolt = <1800000>;
 349                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 350                 };
 351
 352                 /* L2-4 are unused. */
 353
 354                 vreg_l5c_1p8: ldo5 {
 355                         regulator-name = "vreg_l5c_1p8";
 356                         regulator-min-microvolt = <1800000>;
 357                         regulator-max-microvolt = <2800000>;
 358                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 359                 };
 360
 361                 vreg_l6c_2p9: ldo6 {
 362                         regulator-name = "vreg_l6c_2p9";
 363                         regulator-min-microvolt = <1800000>;
 364                         regulator-max-microvolt = <2960000>;
 365                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 366                         regulator-allow-set-load;
 367                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 368                                                    RPMH_REGULATOR_MODE_HPM>;
 369                 };
 370
 371                 vreg_l7c_2p85: ldo7 {
 372                         regulator-name = "vreg_l7c_2p85";
 373                         regulator-min-microvolt = <2856000>;
 374                         regulator-max-microvolt = <3104000>;
 375                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 376                 };
 377
 378                 vreg_l8c_1p8: ldo8 {
 379                         regulator-name = "vreg_l8c_1p8";
 380                         regulator-min-microvolt = <1800000>;
 381                         regulator-max-microvolt = <1800000>;
 382                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 383                 };
 384
 385                 vreg_l9c_2p9: ldo9 {
 386                         regulator-name = "vreg_l9c_2p9";
 387                         regulator-min-microvolt = <2704000>;
 388                         regulator-max-microvolt = <2960000>;
 389                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 390                         regulator-allow-set-load;
 391                         regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
 392                                                    RPMH_REGULATOR_MODE_HPM>;
 393                 };
 394
 395                 vreg_l10c_3p3: ldo10 {
 396                         regulator-name = "vreg_l10c_3p3";
 397                         regulator-min-microvolt = <3296000>;
 398                         regulator-max-microvolt = <3296000>;
 399                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 400                 };
 401
 402                 vreg_l11c_3p0: ldo11 {
 403                         regulator-name = "vreg_l11c_3p0";
 404                         regulator-min-microvolt = <3000000>;
 405                         regulator-max-microvolt = <3000000>;
 406                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 407                 };
 408         };
 409
 410         regulators-2 {
 411                 compatible = "qcom,pm8009-rpmh-regulators";
 412                 qcom,pmic-id = "f";
 413
 414                 vdd-s1-supply = <&vph_pwr>;
 415                 vdd-s2-supply = <&vreg_bob>;
 416                 vdd-l2-supply = <&vreg_s8c_1p35>;
 417                 vdd-l5-l6-supply = <&vreg_bob>;
 418                 vdd-l7-supply = <&vreg_s4a_1p8>;
 419
 420                 vreg_s1f_1p2: smps1 {
 421                         regulator-name = "vreg_s1f_1p2";
 422                         regulator-min-microvolt = <1200000>;
 423                         regulator-max-microvolt = <1200000>;
 424                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 425                 };
 426
 427                 vreg_s2f_0p5: smps2 {
 428                         regulator-name = "vreg_s2f_0p5";
 429                         regulator-min-microvolt = <512000>;
 430                         regulator-max-microvolt = <1100000>;
 431                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 432                 };
 433
 434                 /* L1 is unused. */
 435
 436                 vreg_l2f_1p3: ldo2 {
 437                         regulator-name = "vreg_l2f_1p3";
 438                         regulator-min-microvolt = <1304000>;
 439                         regulator-max-microvolt = <1304000>;
 440                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 441                 };
 442
 443                 /* L3 & L4 are unused. */
 444
 445                 vreg_l5f_2p8: ldo5 {
 446                         regulator-name = "vreg_l5f_2p85";
 447                         regulator-min-microvolt = <2800000>;
 448                         regulator-max-microvolt = <2800000>;
 449                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 450                 };
 451
 452                 vreg_l6f_2p8: ldo6 {
 453                         regulator-name = "vreg_l6f_2p8";
 454                         regulator-min-microvolt = <2800000>;
 455                         regulator-max-microvolt = <2800000>;
 456                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 457                 };
 458
 459                 vreg_l7f_1p8: ldo7 {
 460                         regulator-name = "vreg_l7f_1p8";
 461                         regulator-min-microvolt = <1800000>;
 462                         regulator-max-microvolt = <1800000>;
 463                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 464                 };
 465         };
 466 };
 467
 468 &cdsp {
 469         firmware-name = "/*(DEBLOBBED)*/";
 470         status = "okay";
 471 };
 472
 473 &gmu {
 474         status = "okay";
 475 };
 476
 477 &gpi_dma0 {
 478         status = "okay";
 479 };
 480
 481 &gpi_dma1 {
 482         status = "okay";
 483 };
 484
 485 &gpi_dma2 {
 486         status = "okay";
 487 };
 488
 489 &gpu {
 490         status = "okay";
 491
 492         zap-shader {
 493                 memory-region = <&gpu_mem>;
 494                 firmware-name = "/*(DEBLOBBED)*/";
 495         };
 496 };
 497
 498 &i2c0 {
 499         clock-frequency = <400000>;
 500         status = "okay";
 501
 502         fuel-gauge@55 {
 503                 compatible = "ti,bq27z561";
 504                 reg = <0x55>;
 505                 monitored-battery = <&battery_r>;
 506         };
 507 };
 508
 509 &i2c11 {
 510         clock-frequency = <400000>;
 511         status = "okay";
 512
 513         backlight: backlight@11 {
 514                 compatible = "kinetic,ktz8866";
 515                 reg = <0x11>;
 516                 vddpos-supply = <&bl_vddpos_5p5>;
 517                 vddneg-supply = <&bl_vddneg_5p5>;
 518                 enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
 519                 current-num-sinks = <5>;
 520                 kinetic,current-ramp-delay-ms = <128>;
 521                 kinetic,led-enable-ramp-delay-ms = <1>;
 522                 kinetic,enable-lcd-bias;
 523         };
 524 };
 525
 526 &i2c13 {
 527         clock-frequency = <400000>;
 528         status = "okay";
 529
 530         fuel-gauge@55 {
 531                 compatible = "ti,bq27z561";
 532                 reg = <0x55>;
 533                 monitored-battery = <&battery_l>;
 534         };
 535 };
 536
 537 &mdss {
 538         status = "okay";
 539 };
 540
 541 &mdss_dsi0 {
 542         vdda-supply = <&vreg_l9a_1p2>;
 543         qcom,dual-dsi-mode;
 544         qcom,sync-dual-dsi;
 545         qcom,master-dsi;
 546         status = "okay";
 547
 548         display_panel: panel@0 {
 549                 reg = <0>;
 550                 vddio-supply = <&vreg_l14a_1p88>;
 551                 reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
 552                 backlight = <&backlight>;
 553
 554                 status = "disabled";
 555
 556                 ports {
 557                         #address-cells = <1>;
 558                         #size-cells = <0>;
 559
 560                         port@0 {
 561                                 reg = <0>;
 562
 563                                 panel_in_0: endpoint {
 564                                         remote-endpoint = <&mdss_dsi0_out>;
 565                                 };
 566                         };
 567
 568                         port@1 {
 569                                 reg = <1>;
 570
 571                                 panel_in_1: endpoint {
 572                                         remote-endpoint = <&mdss_dsi1_out>;
 573                                 };
 574                         };
 575                 };
 576         };
 577 };
 578
 579 &mdss_dsi0_out {
 580         data-lanes = <0 1 2>;
 581         remote-endpoint = <&panel_in_0>;
 582 };
 583
 584 &mdss_dsi0_phy {
 585         vdds-supply = <&vreg_l5a_0p88>;
 586         phy-type = <PHY_TYPE_CPHY>;
 587         status = "okay";
 588 };
 589
 590 &mdss_dsi1 {
 591         vdda-supply = <&vreg_l9a_1p2>;
 592         qcom,dual-dsi-mode;
 593         qcom,sync-dual-dsi;
 594         /* DSI1 is slave, so use DSI0 clocks */
 595         assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
 596         status = "okay";
 597 };
 598
 599 &mdss_dsi1_out {
 600         data-lanes = <0 1 2>;
 601         remote-endpoint = <&panel_in_1>;
 602 };
 603
 604 &mdss_dsi1_phy {
 605         vdds-supply = <&vreg_l5a_0p88>;
 606         phy-type = <PHY_TYPE_CPHY>;
 607         status = "okay";
 608 };
 609
 610 &pcie0 {
 611         status = "okay";
 612 };
 613
 614 &pcie0_phy {
 615         vdda-phy-supply = <&vreg_l5a_0p88>;
 616         vdda-pll-supply = <&vreg_l9a_1p2>;
 617         status = "okay";
 618 };
 619
 620 &pm8150_gpios {
 621         vol_up_n: vol-up-n-state {
 622                 pins = "gpio6";
 623                 function = "normal";
 624                 power-source = <1>;
 625                 input-enable;
 626                 bias-pull-up;
 627         };
 628 };
 629
 630 &pon_pwrkey {
 631         status = "okay";
 632 };
 633
 634 &pon_resin {
 635         linux,code = <KEY_VOLUMEDOWN>;
 636         status = "okay";
 637 };
 638
 639 &qupv3_id_0 {
 640         status = "okay";
 641 };
 642
 643 &qupv3_id_1 {
 644         status = "okay";
 645 };
 646
 647 &qupv3_id_2 {
 648         status = "okay";
 649 };
 650
 651 &slpi {
 652         firmware-name = "/*(DEBLOBBED)*/";
 653         status = "okay";
 654 };
 655
 656 &tlmm {
 657         gpio-reserved-ranges = <40 4>;
 658 };
 659
 660 &usb_1 {
 661         /* USB 2.0 only */
 662         qcom,select-utmi-as-pipe-clk;
 663         status = "okay";
 664 };
 665
 666 &usb_1_dwc3 {
 667         dr_mode = "peripheral";
 668         maximum-speed = "high-speed";
 669         /* Remove USB3 phy */
 670         phys = <&usb_1_hsphy>;
 671         phy-names = "usb2-phy";
 672 };
 673
 674 &usb_1_hsphy {
 675         vdda-pll-supply = <&vreg_l5a_0p88>;
 676         vdda18-supply = <&vreg_l12a_1p8>;
 677         vdda33-supply = <&vreg_l2a_3p1>;
 678         status = "okay";
 679 };
 680
 681 &ufs_mem_hc {
 682         vcc-supply = <&vreg_l17a_3p0>;
 683         vcc-max-microamp = <800000>;
 684         vccq-supply = <&vreg_l6a_1p2>;
 685         vccq-max-microamp = <800000>;
 686         vccq2-supply = <&vreg_s4a_1p8>;
 687         vccq2-max-microamp = <800000>;
 688         status = "okay";
 689 };
 690
 691 &ufs_mem_phy {
 692         vdda-phy-supply = <&vreg_l5a_0p88>;
 693         vdda-pll-supply = <&vreg_l9a_1p2>;
 694         status = "okay";
 695 };
 696
 697 &venus {
 698         firmware-name = "/*(DEBLOBBED)*/";
 699         status = "okay";
 700 };