arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sm8250-sony-xperia-edo.dtsi"
   9
  10 / {
  11         model = "Sony Xperia 1 II";
  12         compatible = "sony,pdx203-generic", "qcom,sm8250";
  13         chassis-type = "handset";
  14 };
  15
  16 /delete-node/ &vreg_l7f_1p8;
  17
  18 &i2c5 {
  19         clock-frequency = <400000>;
  20         status = "okay";
  21
  22         pmic@75 {
  23                 compatible = "dlg,slg51000";
  24                 reg = <0x75>;
  25                 dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
  26                 vin5-supply = <&vreg_s1f_1p2>;
  27                 vin6-supply = <&vreg_s1f_1p2>;
  28
  29                 pinctrl-0 = <&cam_pwr_b_cs>;
  30                 pinctrl-names = "default";
  31
  32                 regulators {
  33                         slg51000_1_ldo1: ldo1 {
  34                                 regulator-name = "slg51000_b_ldo1";
  35                                 regulator-min-microvolt = <2400000>;
  36                                 regulator-max-microvolt = <3300000>;
  37                         };
  38
  39                         slg51000_1_ldo2: ldo2 {
  40                                 regulator-name = "slg51000_b_ldo2";
  41                                 regulator-min-microvolt = <2400000>;
  42                                 regulator-max-microvolt = <3300000>;
  43                         };
  44
  45                         slg51000_1_ldo3: ldo3 {
  46                                 regulator-name = "slg51000_b_ldo3";
  47                                 regulator-min-microvolt = <1200000>;
  48                                 regulator-max-microvolt = <3750000>;
  49                         };
  50
  51                         slg51000_1_ldo4: ldo4 {
  52                                 regulator-name = "slg51000_b_ldo4";
  53                                 regulator-min-microvolt = <1200000>;
  54                                 regulator-max-microvolt = <3750000>;
  55                         };
  56
  57                         slg51000_1_ldo5: ldo5 {
  58                                 regulator-name = "slg51000_b_ldo5";
  59                                 regulator-min-microvolt = <500000>;
  60                                 regulator-max-microvolt = <1200000>;
  61                         };
  62
  63                         slg51000_1_ldo6: ldo6 {
  64                                 regulator-name = "slg51000_b_ldo6";
  65                                 regulator-min-microvolt = <500000>;
  66                                 regulator-max-microvolt = <1200000>;
  67                         };
  68
  69                         slg51000_1_ldo7: ldo7 {
  70                                 regulator-name = "slg51000_b_ldo7";
  71                                 regulator-min-microvolt = <1200000>;
  72                                 regulator-max-microvolt = <3750000>;
  73                         };
  74                 };
  75         };
  76 };
  77
  78 &i2c15 {
  79         pmic@75 {
  80                 compatible = "dlg,slg51000";
  81                 reg = <0x75>;
  82                 dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;
  83                 vin5-supply = <&vreg_l2f_1p3>;
  84                 vin6-supply = <&vreg_l2f_1p3>;
  85
  86                 pinctrl-0 = <&cam_pwr_a_cs>;
  87                 pinctrl-names = "default";
  88
  89                 regulators {
  90                         slg51000_0_ldo1: ldo1 {
  91                                 regulator-name = "slg51000_a_ldo1";
  92                                 regulator-min-microvolt = <2400000>;
  93                                 regulator-max-microvolt = <3300000>;
  94                         };
  95
  96                         slg51000_0_ldo2: ldo2 {
  97                                 regulator-name = "slg51000_a_ldo2";
  98                                 regulator-min-microvolt = <2400000>;
  99                                 regulator-max-microvolt = <3300000>;
 100                         };
 101
 102                         slg51000_0_ldo3: ldo3 {
 103                                 regulator-name = "slg51000_a_ldo3";
 104                                 regulator-min-microvolt = <1200000>;
 105                                 regulator-max-microvolt = <3750000>;
 106                         };
 107
 108                         slg51000_0_ldo4: ldo4 {
 109                                 regulator-name = "slg51000_a_ldo4";
 110                                 regulator-min-microvolt = <1200000>;
 111                                 regulator-max-microvolt = <3750000>;
 112                         };
 113
 114                         slg51000_0_ldo5: ldo5 {
 115                                 regulator-name = "slg51000_a_ldo5";
 116                                 regulator-min-microvolt = <500000>;
 117                                 regulator-max-microvolt = <1200000>;
 118                         };
 119
 120                         slg51000_0_ldo6: ldo6 {
 121                                 regulator-name = "slg51000_a_ldo6";
 122                                 regulator-min-microvolt = <500000>;
 123                                 regulator-max-microvolt = <1200000>;
 124                         };
 125
 126                         slg51000_0_ldo7: ldo7 {
 127                                 regulator-name = "slg51000_a_ldo7";
 128                                 regulator-min-microvolt = <1200000>;
 129                                 regulator-max-microvolt = <3750000>;
 130                         };
 131                 };
 132         };
 133 };
 134
 135 &pm8009_gpios {
 136         gpio-line-names = "NC", /* GPIO_1 */
 137                           "CAM_PWR_LD_EN",
 138                           "WIDEC_PWR_EN",
 139                           "NC";
 140 };
 141
 142 &pm8150_gpios {
 143         gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
 144                           "OPTION_2",
 145                           "NC",
 146                           "PM_SLP_CLK_IN",
 147                           "OPTION_1",
 148                           "NC",
 149                           "NC",
 150                           "SP_ARI_PWR_ALARM",
 151                           "NC",
 152                           "NC"; /* GPIO_10 */
 153 };
 154
 155 &pm8150b_gpios {
 156         gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
 157                           "FOCUS_N",
 158                           "NC",
 159                           "NC",
 160                           "RF_LCD_ID_EN",
 161                           "NC",
 162                           "NC",
 163                           "LCD_ID",
 164                           "NC",
 165                           "WLC_EN_N", /* GPIO_10 */
 166                           "NC",
 167                           "RF_ID";
 168 };
 169
 170 &pm8150l_gpios {
 171         gpio-line-names = "NC", /* GPIO_1 */
 172                           "PM3003A_EN",
 173                           "NC",
 174                           "NC",
 175                           "NC",
 176                           "AUX2_THERM",
 177                           "BB_HP_EN",
 178                           "FP_LDO_EN",
 179                           "PMX_RESET_N",
 180                           "AUX3_THERM", /* GPIO_10 */
 181                           "DTV_PWR_EN",
 182                           "PM3003A_MODE";
 183 };
 184
 185 &tlmm {
 186         gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
 187                           "MDM2AP_ERR_FATAL",
 188                           "AP_CTI_OUT",
 189                           "MDM2AP_STATUS",
 190                           "NFC_I2C_SDA",
 191                           "NFC_I2C_SCL",
 192                           "NFC_EN",
 193                           "NFC_CLK_REQ",
 194                           "NFC_ESE_PWR_REQ",
 195                           "DVDT_WRT_DET_AND",
 196                           "SPK_AMP_RESET_N", /* GPIO_10 */
 197                           "SPK_AMP_INT_N",
 198                           "APPS_I2C_1_SDA",
 199                           "APPS_I2C_1_SCL",
 200                           "NC",
 201                           "TX_GTR_THRES_IN",
 202                           "HST_BT_UART_CTS",
 203                           "HST_BT_UART_RFR",
 204                           "HST_BT_UART_TX",
 205                           "HST_BT_UART_RX",
 206                           "HST_WLAN_EN", /* GPIO_20 */
 207                           "HST_BT_EN",
 208                           "RGBC_IR_PWR_EN",
 209                           "FP_INT_N",
 210                           "NC",
 211                           "NC",
 212                           "NC",
 213                           "NC",
 214                           "NFC_ESE_SPI_MISO",
 215                           "NFC_ESE_SPI_MOSI",
 216                           "NFC_ESE_SPI_SCLK", /* GPIO_30 */
 217                           "NFC_ESE_SPI_CS_N",
 218                           "WCD_RST_N",
 219                           "NC",
 220                           "SDM_DEBUG_UART_TX",
 221                           "SDM_DEBUG_UART_RX",
 222                           "TS_I2C_SDA",
 223                           "TS_I2C_SCL",
 224                           "TS_INT_N",
 225                           "FP_SPI_MISO", /* GPIO_40 */
 226                           "FP_SPI_MOSI",
 227                           "FP_SPI_SCLK",
 228                           "FP_SPI_CS_N",
 229                           "APPS_I2C_0_SDA",
 230                           "APPS_I2C_0_SCL",
 231                           "DISP_ERR_FG",
 232                           "UIM2_DETECT_EN",
 233                           "NC",
 234                           "NC",
 235                           "NC", /* GPIO_50 */
 236                           "NC",
 237                           "MDM_UART_CTS",
 238                           "MDM_UART_RFR",
 239                           "MDM_UART_TX",
 240                           "MDM_UART_RX",
 241                           "AP2MDM_STATUS",
 242                           "AP2MDM_ERR_FATAL",
 243                           "MDM_IPC_HS_UART_TX",
 244                           "MDM_IPC_HS_UART_RX",
 245                           "NC", /* GPIO_60 */
 246                           "NC",
 247                           "NC",
 248                           "NC",
 249                           "NC",
 250                           "USB_CC_DIR",
 251                           "DISP_VSYNC",
 252                           "NC",
 253                           "NC",
 254                           "CAM_PWR_B_CS",
 255                           "NC", /* GPIO_70 */
 256                           "CAM_PWR_A_CS",
 257                           "SBU_SW_SEL",
 258                           "SBU_SW_OE",
 259                           "FP_RESET_N",
 260                           "FP_RESET_N",
 261                           "DISP_RESET_N",
 262                           "DEBUG_GPIO0",
 263                           "TRAY_DET",
 264                           "CAM2_RST_N",
 265                           "PCIE0_RST_N",
 266                           "PCIE0_CLK_REQ_N", /* GPIO_80 */
 267                           "PCIE0_WAKE_N",
 268                           "DVDT_ENABLE",
 269                           "DVDT_WRT_DET_OR",
 270                           "NC",
 271                           "PCIE2_RST_N",
 272                           "PCIE2_CLK_REQ_N",
 273                           "PCIE2_WAKE_N",
 274                           "MDM_VFR_IRQ0",
 275                           "MDM_VFR_IRQ1",
 276                           "SW_SERVICE", /* GPIO_90 */
 277                           "CAM_SOF",
 278                           "CAM1_RST_N",
 279                           "CAM0_RST_N",
 280                           "CAM0_MCLK",
 281                           "CAM1_MCLK",
 282                           "CAM2_MCLK",
 283                           "CAM3_MCLK",
 284                           "CAM4_MCLK",
 285                           "TOF_RST_N",
 286                           "NC", /* GPIO_100 */
 287                           "CCI0_I2C_SDA",
 288                           "CCI0_I2C_SCL",
 289                           "CCI1_I2C_SDA",
 290                           "CCI1_I2C_SCL_",
 291                           "CCI2_I2C_SDA",
 292                           "CCI2_I2C_SCL",
 293                           "CCI3_I2C_SDA",
 294                           "CCI3_I2C_SCL",
 295                           "CAM3_RST_N",
 296                           "NFC_DWL_REQ", /* GPIO_110 */
 297                           "NFC_IRQ",
 298                           "XVS",
 299                           "NC",
 300                           "RF_ID_EXTENSION",
 301                           "SPK_AMP_I2C_SDA",
 302                           "SPK_AMP_I2C_SCL",
 303                           "NC",
 304                           "NC",
 305                           "WLC_I2C_SDA",
 306                           "WLC_I2C_SCL", /* GPIO_120 */
 307                           "ACC_COVER_OPEN",
 308                           "ALS_PROX_INT_N",
 309                           "ACCEL_INT",
 310                           "WLAN_SW_CTRL",
 311                           "CAMSENSOR_I2C_SDA",
 312                           "CAMSENSOR_I2C_SCL",
 313                           "UDON_SWITCH_SEL",
 314                           "WDOG_DISABLE",
 315                           "BAROMETER_INT",
 316                           "NC", /* GPIO_130 */
 317                           "NC",
 318                           "FORCED_USB_BOOT",
 319                           "NC",
 320                           "NC",
 321                           "WLC_INT_N",
 322                           "NC",
 323                           "NC",
 324                           "RGBC_IR_INT",
 325                           "NC",
 326                           "NC", /* GPIO_140 */
 327                           "NC",
 328                           "BT_SLIMBUS_CLK",
 329                           "BT_SLIMBUS_DATA",
 330                           "HW_ID_0",
 331                           "HW_ID_1",
 332                           "WCD_SWR_TX_CLK",
 333                           "WCD_SWR_TX_DATA0",
 334                           "WCD_SWR_TX_DATA1",
 335                           "WCD_SWR_RX_CLK",
 336                           "WCD_SWR_RX_DATA0", /* GPIO_150 */
 337                           "WCD_SWR_RX_DATA1",
 338                           "SDM_DMIC_CLK1",
 339                           "SDM_DMIC_DATA1",
 340                           "SDM_DMIC_CLK2",
 341                           "SDM_DMIC_DATA2",
 342                           "SPK_AMP_I2S_CLK",
 343                           "SPK_AMP_I2S_WS",
 344                           "SPK_AMP_I2S_ASP_DIN",
 345                           "SPK_AMP_I2S_ASP_DOUT",
 346                           "COMPASS_I2C_SDA", /* GPIO_160 */
 347                           "COMPASS_I2C_SCL",
 348                           "NC",
 349                           "NC",
 350                           "SSC_SPI_1_MISO",
 351                           "SSC_SPI_1_MOSI",
 352                           "SSC_SPI_1_CLK",
 353                           "SSC_SPI_1_CS_N",
 354                           "NC",
 355                           "NC",
 356                           "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
 357                           "SSC_SENSOR_I2C_SCL",
 358                           "NC",
 359                           "NC",
 360                           "NC",
 361                           "NC",
 362                           "HST_BLE_SNS_UART6_TX",
 363                           "HST_BLE_SNS_UART6_RX",
 364                           "HST_WLAN_UART_TX",
 365                           "HST_WLAN_UART_RX";
 366
 367         cam_pwr_b_cs: cam-pwr-b-state {
 368                 pins = "gpio69";
 369                 function = "gpio";
 370                 drive-strength = <2>;
 371                 bias-disable;
 372                 output-low;
 373         };
 374
 375         cam_pwr_a_cs: cam-pwr-a-state {
 376                 pins = "gpio71";
 377                 function = "gpio";
 378                 drive-strength = <2>;
 379                 bias-disable;
 380                 output-low;
 381         };
 382 };