arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sm8250-sony-xperia-edo.dtsi"
   9
  10 / {
  11         model = "Sony Xperia 1 II";
  12         compatible = "sony,pdx203-generic", "qcom,sm8250";
  13         chassis-type = "handset";
  14 };
  15
  16 /delete-node/ &vreg_l7f_1p8;
  17
  18 &pm8009_gpios {
  19         gpio-line-names = "NC", /* GPIO_1 */
  20                           "CAM_PWR_LD_EN",
  21                           "WIDEC_PWR_EN",
  22                           "NC";
  23 };
  24
  25 &pm8150_gpios {
  26         gpio-line-names = "VOL_DOWN_N", /* GPIO_1 */
  27                           "OPTION_2",
  28                           "NC",
  29                           "PM_SLP_CLK_IN",
  30                           "OPTION_1",
  31                           "NC",
  32                           "NC",
  33                           "SP_ARI_PWR_ALARM",
  34                           "NC",
  35                           "NC"; /* GPIO_10 */
  36 };
  37
  38 &pm8150b_gpios {
  39         gpio-line-names = "SNAPSHOT_N", /* GPIO_1 */
  40                           "FOCUS_N",
  41                           "NC",
  42                           "NC",
  43                           "RF_LCD_ID_EN",
  44                           "NC",
  45                           "NC",
  46                           "LCD_ID",
  47                           "NC",
  48                           "WLC_EN_N", /* GPIO_10 */
  49                           "NC",
  50                           "RF_ID";
  51 };
  52
  53 &pm8150l_gpios {
  54         gpio-line-names = "NC", /* GPIO_1 */
  55                           "PM3003A_EN",
  56                           "NC",
  57                           "NC",
  58                           "NC",
  59                           "AUX2_THERM",
  60                           "BB_HP_EN",
  61                           "FP_LDO_EN",
  62                           "PMX_RESET_N",
  63                           "AUX3_THERM", /* GPIO_10 */
  64                           "DTV_PWR_EN",
  65                           "PM3003A_MODE";
  66 };
  67
  68 &tlmm {
  69         gpio-line-names = "AP_CTI_IN", /* GPIO_0 */
  70                           "MDM2AP_ERR_FATAL",
  71                           "AP_CTI_OUT",
  72                           "MDM2AP_STATUS",
  73                           "NFC_I2C_SDA",
  74                           "NFC_I2C_SCL",
  75                           "NFC_EN",
  76                           "NFC_CLK_REQ",
  77                           "NFC_ESE_PWR_REQ",
  78                           "DVDT_WRT_DET_AND",
  79                           "SPK_AMP_RESET_N", /* GPIO_10 */
  80                           "SPK_AMP_INT_N",
  81                           "APPS_I2C_1_SDA",
  82                           "APPS_I2C_1_SCL",
  83                           "NC",
  84                           "TX_GTR_THRES_IN",
  85                           "HST_BT_UART_CTS",
  86                           "HST_BT_UART_RFR",
  87                           "HST_BT_UART_TX",
  88                           "HST_BT_UART_RX",
  89                           "HST_WLAN_EN", /* GPIO_20 */
  90                           "HST_BT_EN",
  91                           "RGBC_IR_PWR_EN",
  92                           "FP_INT_N",
  93                           "NC",
  94                           "NC",
  95                           "NC",
  96                           "NC",
  97                           "NFC_ESE_SPI_MISO",
  98                           "NFC_ESE_SPI_MOSI",
  99                           "NFC_ESE_SPI_SCLK", /* GPIO_30 */
 100                           "NFC_ESE_SPI_CS_N",
 101                           "WCD_RST_N",
 102                           "NC",
 103                           "SDM_DEBUG_UART_TX",
 104                           "SDM_DEBUG_UART_RX",
 105                           "TS_I2C_SDA",
 106                           "TS_I2C_SCL",
 107                           "TS_INT_N",
 108                           "FP_SPI_MISO", /* GPIO_40 */
 109                           "FP_SPI_MOSI",
 110                           "FP_SPI_SCLK",
 111                           "FP_SPI_CS_N",
 112                           "APPS_I2C_0_SDA",
 113                           "APPS_I2C_0_SCL",
 114                           "DISP_ERR_FG",
 115                           "UIM2_DETECT_EN",
 116                           "NC",
 117                           "NC",
 118                           "NC", /* GPIO_50 */
 119                           "NC",
 120                           "MDM_UART_CTS",
 121                           "MDM_UART_RFR",
 122                           "MDM_UART_TX",
 123                           "MDM_UART_RX",
 124                           "AP2MDM_STATUS",
 125                           "AP2MDM_ERR_FATAL",
 126                           "MDM_IPC_HS_UART_TX",
 127                           "MDM_IPC_HS_UART_RX",
 128                           "NC", /* GPIO_60 */
 129                           "NC",
 130                           "NC",
 131                           "NC",
 132                           "NC",
 133                           "USB_CC_DIR",
 134                           "DISP_VSYNC",
 135                           "NC",
 136                           "NC",
 137                           "CAM_PWR_B_CS",
 138                           "NC", /* GPIO_70 */
 139                           "CAM_PWR_A_CS",
 140                           "SBU_SW_SEL",
 141                           "SBU_SW_OE",
 142                           "FP_RESET_N",
 143                           "FP_RESET_N",
 144                           "DISP_RESET_N",
 145                           "DEBUG_GPIO0",
 146                           "TRAY_DET",
 147                           "CAM2_RST_N",
 148                           "PCIE0_RST_N",
 149                           "PCIE0_CLK_REQ_N", /* GPIO_80 */
 150                           "PCIE0_WAKE_N",
 151                           "DVDT_ENABLE",
 152                           "DVDT_WRT_DET_OR",
 153                           "NC",
 154                           "PCIE2_RST_N",
 155                           "PCIE2_CLK_REQ_N",
 156                           "PCIE2_WAKE_N",
 157                           "MDM_VFR_IRQ0",
 158                           "MDM_VFR_IRQ1",
 159                           "SW_SERVICE", /* GPIO_90 */
 160                           "CAM_SOF",
 161                           "CAM1_RST_N",
 162                           "CAM0_RST_N",
 163                           "CAM0_MCLK",
 164                           "CAM1_MCLK",
 165                           "CAM2_MCLK",
 166                           "CAM3_MCLK",
 167                           "CAM4_MCLK",
 168                           "TOF_RST_N",
 169                           "NC", /* GPIO_100 */
 170                           "CCI0_I2C_SDA",
 171                           "CCI0_I2C_SCL",
 172                           "CCI1_I2C_SDA",
 173                           "CCI1_I2C_SCL_",
 174                           "CCI2_I2C_SDA",
 175                           "CCI2_I2C_SCL",
 176                           "CCI3_I2C_SDA",
 177                           "CCI3_I2C_SCL",
 178                           "CAM3_RST_N",
 179                           "NFC_DWL_REQ", /* GPIO_110 */
 180                           "NFC_IRQ",
 181                           "XVS",
 182                           "NC",
 183                           "RF_ID_EXTENSION",
 184                           "SPK_AMP_I2C_SDA",
 185                           "SPK_AMP_I2C_SCL",
 186                           "NC",
 187                           "NC",
 188                           "WLC_I2C_SDA",
 189                           "WLC_I2C_SCL", /* GPIO_120 */
 190                           "ACC_COVER_OPEN",
 191                           "ALS_PROX_INT_N",
 192                           "ACCEL_INT",
 193                           "WLAN_SW_CTRL",
 194                           "CAMSENSOR_I2C_SDA",
 195                           "CAMSENSOR_I2C_SCL",
 196                           "UDON_SWITCH_SEL",
 197                           "WDOG_DISABLE",
 198                           "BAROMETER_INT",
 199                           "NC", /* GPIO_130 */
 200                           "NC",
 201                           "FORCED_USB_BOOT",
 202                           "NC",
 203                           "NC",
 204                           "WLC_INT_N",
 205                           "NC",
 206                           "NC",
 207                           "RGBC_IR_INT",
 208                           "NC",
 209                           "NC", /* GPIO_140 */
 210                           "NC",
 211                           "BT_SLIMBUS_CLK",
 212                           "BT_SLIMBUS_DATA",
 213                           "HW_ID_0",
 214                           "HW_ID_1",
 215                           "WCD_SWR_TX_CLK",
 216                           "WCD_SWR_TX_DATA0",
 217                           "WCD_SWR_TX_DATA1",
 218                           "WCD_SWR_RX_CLK",
 219                           "WCD_SWR_RX_DATA0", /* GPIO_150 */
 220                           "WCD_SWR_RX_DATA1",
 221                           "SDM_DMIC_CLK1",
 222                           "SDM_DMIC_DATA1",
 223                           "SDM_DMIC_CLK2",
 224                           "SDM_DMIC_DATA2",
 225                           "SPK_AMP_I2S_CLK",
 226                           "SPK_AMP_I2S_WS",
 227                           "SPK_AMP_I2S_ASP_DIN",
 228                           "SPK_AMP_I2S_ASP_DOUT",
 229                           "COMPASS_I2C_SDA", /* GPIO_160 */
 230                           "COMPASS_I2C_SCL",
 231                           "NC",
 232                           "NC",
 233                           "SSC_SPI_1_MISO",
 234                           "SSC_SPI_1_MOSI",
 235                           "SSC_SPI_1_CLK",
 236                           "SSC_SPI_1_CS_N",
 237                           "NC",
 238                           "NC",
 239                           "SSC_SENSOR_I2C_SDA", /* GPIO_170 */
 240                           "SSC_SENSOR_I2C_SCL",
 241                           "NC",
 242                           "NC",
 243                           "NC",
 244                           "NC",
 245                           "HST_BLE_SNS_UART6_TX",
 246                           "HST_BLE_SNS_UART6_RX",
 247                           "HST_WLAN_UART_TX",
 248                           "HST_WLAN_UART_RX";
 249 };