arch/arm64/boot/dts/qcom/sm6375.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 #include <dt-bindings/clock/qcom,rpmcc.h>
   7 #include <dt-bindings/clock/qcom,sm6375-gcc.h>
   8 #include <dt-bindings/clock/qcom,sm6375-gpucc.h>
   9 #include <dt-bindings/dma/qcom-gpi.h>
  10 #include <dt-bindings/firmware/qcom,scm.h>
  11 #include <dt-bindings/interconnect/qcom,osm-l3.h>
  12 #include <dt-bindings/interrupt-controller/arm-gic.h>
  13 #include <dt-bindings/mailbox/qcom-ipcc.h>
  14 #include <dt-bindings/power/qcom-rpmpd.h>
  15
  16 / {
  17         interrupt-parent = <&intc>;
  18
  19         #address-cells = <2>;
  20         #size-cells = <2>;
  21
  22         chosen { };
  23
  24         clocks {
  25                 xo_board_clk: xo-board-clk {
  26                         compatible = "fixed-clock";
  27                         #clock-cells = <0>;
  28                 };
  29
  30                 sleep_clk: sleep-clk {
  31                         compatible = "fixed-clock";
  32                         clock-frequency = <32000>;
  33                         #clock-cells = <0>;
  34                 };
  35         };
  36
  37         cpus {
  38                 #address-cells = <2>;
  39                 #size-cells = <0>;
  40
  41                 CPU0: cpu@0 {
  42                         device_type = "cpu";
  43                         compatible = "qcom,kryo660";
  44                         reg = <0x0 0x0>;
  45                         clocks = <&cpufreq_hw 0>;
  46                         enable-method = "psci";
  47                         next-level-cache = <&L2_0>;
  48                         qcom,freq-domain = <&cpufreq_hw 0>;
  49                         operating-points-v2 = <&cpu0_opp_table>;
  50                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
  51                         power-domains = <&CPU_PD0>;
  52                         power-domain-names = "psci";
  53                         #cooling-cells = <2>;
  54                         L2_0: l2-cache {
  55                                 compatible = "cache";
  56                                 cache-level = <2>;
  57                                 cache-unified;
  58                                 next-level-cache = <&L3_0>;
  59                                 L3_0: l3-cache {
  60                                         compatible = "cache";
  61                                         cache-level = <3>;
  62                                         cache-unified;
  63                                 };
  64                         };
  65                 };
  66
  67                 CPU1: cpu@100 {
  68                         device_type = "cpu";
  69                         compatible = "qcom,kryo660";
  70                         reg = <0x0 0x100>;
  71                         clocks = <&cpufreq_hw 0>;
  72                         enable-method = "psci";
  73                         next-level-cache = <&L2_100>;
  74                         qcom,freq-domain = <&cpufreq_hw 0>;
  75                         operating-points-v2 = <&cpu0_opp_table>;
  76                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
  77                         power-domains = <&CPU_PD1>;
  78                         power-domain-names = "psci";
  79                         #cooling-cells = <2>;
  80                         L2_100: l2-cache {
  81                                 compatible = "cache";
  82                                 cache-level = <2>;
  83                                 cache-unified;
  84                                 next-level-cache = <&L3_0>;
  85                         };
  86                 };
  87
  88                 CPU2: cpu@200 {
  89                         device_type = "cpu";
  90                         compatible = "qcom,kryo660";
  91                         reg = <0x0 0x200>;
  92                         clocks = <&cpufreq_hw 0>;
  93                         enable-method = "psci";
  94                         next-level-cache = <&L2_200>;
  95                         qcom,freq-domain = <&cpufreq_hw 0>;
  96                         operating-points-v2 = <&cpu0_opp_table>;
  97                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
  98                         power-domains = <&CPU_PD2>;
  99                         power-domain-names = "psci";
 100                         #cooling-cells = <2>;
 101                         L2_200: l2-cache {
 102                                 compatible = "cache";
 103                                 cache-level = <2>;
 104                                 cache-unified;
 105                                 next-level-cache = <&L3_0>;
 106                         };
 107                 };
 108
 109                 CPU3: cpu@300 {
 110                         device_type = "cpu";
 111                         compatible = "qcom,kryo660";
 112                         reg = <0x0 0x300>;
 113                         clocks = <&cpufreq_hw 0>;
 114                         enable-method = "psci";
 115                         next-level-cache = <&L2_300>;
 116                         qcom,freq-domain = <&cpufreq_hw 0>;
 117                         operating-points-v2 = <&cpu0_opp_table>;
 118                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
 119                         power-domains = <&CPU_PD3>;
 120                         power-domain-names = "psci";
 121                         #cooling-cells = <2>;
 122                         L2_300: l2-cache {
 123                                 compatible = "cache";
 124                                 cache-level = <2>;
 125                                 cache-unified;
 126                                 next-level-cache = <&L3_0>;
 127                         };
 128                 };
 129
 130                 CPU4: cpu@400 {
 131                         device_type = "cpu";
 132                         compatible = "qcom,kryo660";
 133                         reg = <0x0 0x400>;
 134                         clocks = <&cpufreq_hw 0>;
 135                         enable-method = "psci";
 136                         next-level-cache = <&L2_400>;
 137                         qcom,freq-domain = <&cpufreq_hw 0>;
 138                         operating-points-v2 = <&cpu0_opp_table>;
 139                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
 140                         power-domains = <&CPU_PD4>;
 141                         power-domain-names = "psci";
 142                         #cooling-cells = <2>;
 143                         L2_400: l2-cache {
 144                                 compatible = "cache";
 145                                 cache-level = <2>;
 146                                 cache-unified;
 147                                 next-level-cache = <&L3_0>;
 148                         };
 149                 };
 150
 151                 CPU5: cpu@500 {
 152                         device_type = "cpu";
 153                         compatible = "qcom,kryo660";
 154                         reg = <0x0 0x500>;
 155                         clocks = <&cpufreq_hw 0>;
 156                         enable-method = "psci";
 157                         next-level-cache = <&L2_500>;
 158                         qcom,freq-domain = <&cpufreq_hw 0>;
 159                         operating-points-v2 = <&cpu0_opp_table>;
 160                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
 161                         power-domains = <&CPU_PD5>;
 162                         power-domain-names = "psci";
 163                         #cooling-cells = <2>;
 164                         L2_500: l2-cache {
 165                                 compatible = "cache";
 166                                 cache-level = <2>;
 167                                 cache-unified;
 168                                 next-level-cache = <&L3_0>;
 169                         };
 170                 };
 171
 172                 CPU6: cpu@600 {
 173                         device_type = "cpu";
 174                         compatible = "qcom,kryo660";
 175                         reg = <0x0 0x600>;
 176                         clocks = <&cpufreq_hw 1>;
 177                         enable-method = "psci";
 178                         next-level-cache = <&L2_600>;
 179                         qcom,freq-domain = <&cpufreq_hw 1>;
 180                         operating-points-v2 = <&cpu6_opp_table>;
 181                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
 182                         power-domains = <&CPU_PD6>;
 183                         power-domain-names = "psci";
 184                         #cooling-cells = <2>;
 185                         L2_600: l2-cache {
 186                                 compatible = "cache";
 187                                 cache-level = <2>;
 188                                 cache-unified;
 189                                 next-level-cache = <&L3_0>;
 190                         };
 191                 };
 192
 193                 CPU7: cpu@700 {
 194                         device_type = "cpu";
 195                         compatible = "qcom,kryo660";
 196                         reg = <0x0 0x700>;
 197                         clocks = <&cpufreq_hw 1>;
 198                         enable-method = "psci";
 199                         next-level-cache = <&L2_700>;
 200                         qcom,freq-domain = <&cpufreq_hw 1>;
 201                         operating-points-v2 = <&cpu6_opp_table>;
 202                         interconnects = <&cpucp_l3 MASTER_EPSS_L3_APPS &cpucp_l3 SLAVE_EPSS_L3_SHARED>;
 203                         power-domains = <&CPU_PD7>;
 204                         power-domain-names = "psci";
 205                         #cooling-cells = <2>;
 206                         L2_700: l2-cache {
 207                                 compatible = "cache";
 208                                 cache-level = <2>;
 209                                 cache-unified;
 210                                 next-level-cache = <&L3_0>;
 211                         };
 212                 };
 213
 214                 cpu-map {
 215                         cluster0 {
 216                                 core0 {
 217                                         cpu = <&CPU0>;
 218                                 };
 219
 220                                 core1 {
 221                                         cpu = <&CPU1>;
 222                                 };
 223
 224                                 core2 {
 225                                         cpu = <&CPU2>;
 226                                 };
 227
 228                                 core3 {
 229                                         cpu = <&CPU3>;
 230                                 };
 231
 232                                 core4 {
 233                                         cpu = <&CPU4>;
 234                                 };
 235
 236                                 core5 {
 237                                         cpu = <&CPU5>;
 238                                 };
 239
 240                                 core6 {
 241                                         cpu = <&CPU6>;
 242                                 };
 243
 244                                 core7 {
 245                                         cpu = <&CPU7>;
 246                                 };
 247                         };
 248                 };
 249
 250                 idle-states {
 251                         entry-method = "psci";
 252
 253                         LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
 254                                 compatible = "arm,idle-state";
 255                                 idle-state-name = "silver-power-collapse";
 256                                 arm,psci-suspend-param = <0x40000003>;
 257                                 entry-latency-us = <549>;
 258                                 exit-latency-us = <901>;
 259                                 min-residency-us = <1774>;
 260                                 local-timer-stop;
 261                         };
 262
 263                         LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
 264                                 compatible = "arm,idle-state";
 265                                 idle-state-name = "silver-rail-power-collapse";
 266                                 arm,psci-suspend-param = <0x40000004>;
 267                                 entry-latency-us = <702>;
 268                                 exit-latency-us = <915>;
 269                                 min-residency-us = <4001>;
 270                                 local-timer-stop;
 271                         };
 272
 273                         BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
 274                                 compatible = "arm,idle-state";
 275                                 idle-state-name = "gold-power-collapse";
 276                                 arm,psci-suspend-param = <0x40000003>;
 277                                 entry-latency-us = <523>;
 278                                 exit-latency-us = <1244>;
 279                                 min-residency-us = <2207>;
 280                                 local-timer-stop;
 281                         };
 282
 283                         BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
 284                                 compatible = "arm,idle-state";
 285                                 idle-state-name = "gold-rail-power-collapse";
 286                                 arm,psci-suspend-param = <0x40000004>;
 287                                 entry-latency-us = <526>;
 288                                 exit-latency-us = <1854>;
 289                                 min-residency-us = <5555>;
 290                                 local-timer-stop;
 291                         };
 292                 };
 293
 294                 domain-idle-states {
 295                         CLUSTER_SLEEP_0: cluster-sleep-0 {
 296                                 compatible = "domain-idle-state";
 297                                 arm,psci-suspend-param = <0x41000044>;
 298                                 entry-latency-us = <2752>;
 299                                 exit-latency-us = <3048>;
 300                                 min-residency-us = <6118>;
 301                         };
 302                 };
 303         };
 304
 305         firmware {
 306                 scm {
 307                         compatible = "qcom,scm-sm6375", "qcom,scm";
 308                         clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 309                         clock-names = "core";
 310                         #reset-cells = <1>;
 311                 };
 312         };
 313
 314         memory@80000000 {
 315                 device_type = "memory";
 316                 /* We expect the bootloader to fill in the size */
 317                 reg = <0x0 0x80000000 0x0 0x0>;
 318         };
 319
 320         cpu0_opp_table: opp-table-cpu0 {
 321                 compatible = "operating-points-v2";
 322                 opp-shared;
 323
 324                 opp-300000000 {
 325                         opp-hz = /bits/ 64 <300000000>;
 326                         opp-peak-kBps = <(300000 * 32)>;
 327                 };
 328
 329                 opp-576000000 {
 330                         opp-hz = /bits/ 64 <576000000>;
 331                         opp-peak-kBps = <(556800 * 32)>;
 332                 };
 333
 334                 opp-691200000 {
 335                         opp-hz = /bits/ 64 <691200000>;
 336                         opp-peak-kBps = <(652800 * 32)>;
 337                 };
 338
 339                 opp-940800000 {
 340                         opp-hz = /bits/ 64 <940800000>;
 341                         opp-peak-kBps = <(921600 * 32)>;
 342                 };
 343
 344                 opp-1113600000 {
 345                         opp-hz = /bits/ 64 <1113600000>;
 346                         opp-peak-kBps = <(921600 * 32)>;
 347                 };
 348
 349                 opp-1324800000 {
 350                         opp-hz = /bits/ 64 <1324800000>;
 351                         opp-peak-kBps = <(1171200 * 32)>;
 352                 };
 353
 354                 opp-1516800000 {
 355                         opp-hz = /bits/ 64 <1516800000>;
 356                         opp-peak-kBps = <(1497600 * 32)>;
 357                 };
 358
 359                 opp-1651200000 {
 360                         opp-hz = /bits/ 64 <1651200000>;
 361                         opp-peak-kBps = <(1497600 * 32)>;
 362                 };
 363
 364                 opp-1708800000 {
 365                         opp-hz = /bits/ 64 <1708800000>;
 366                         opp-peak-kBps = <(1497600 * 32)>;
 367                 };
 368
 369                 opp-1804800000 {
 370                         opp-hz = /bits/ 64 <1804800000>;
 371                         opp-peak-kBps = <(1497600 * 32)>;
 372                 };
 373         };
 374
 375         cpu6_opp_table: opp-table-cpu6 {
 376                 compatible = "operating-points-v2";
 377                 opp-shared;
 378
 379                 opp-691200000 {
 380                         opp-hz = /bits/ 64 <691200000>;
 381                         opp-peak-kBps = <(556800 * 32)>;
 382                 };
 383
 384                 opp-940800000 {
 385                         opp-hz = /bits/ 64 <940800000>;
 386                         opp-peak-kBps = <(921600 * 32)>;
 387                 };
 388
 389                 opp-1228800000 {
 390                         opp-hz = /bits/ 64 <1228800000>;
 391                         opp-peak-kBps = <(1171200 * 32)>;
 392                 };
 393
 394                 opp-1401600000 {
 395                         opp-hz = /bits/ 64 <1401600000>;
 396                         opp-peak-kBps = <(1382400 * 32)>;
 397                 };
 398
 399                 opp-1516800000 {
 400                         opp-hz = /bits/ 64 <1516800000>;
 401                         opp-peak-kBps = <(1497600 * 32)>;
 402                 };
 403
 404                 opp-1651200000 {
 405                         opp-hz = /bits/ 64 <1651200000>;
 406                         opp-peak-kBps = <(1497600 * 32)>;
 407                 };
 408
 409                 opp-1804800000 {
 410                         opp-hz = /bits/ 64 <1804800000>;
 411                         opp-peak-kBps = <(1497600 * 32)>;
 412                 };
 413
 414                 opp-1900800000 {
 415                         opp-hz = /bits/ 64 <1900800000>;
 416                         opp-peak-kBps = <(1497600 * 32)>;
 417                 };
 418
 419                 opp-2054400000 {
 420                         opp-hz = /bits/ 64 <2054400000>;
 421                         opp-peak-kBps = <(1497600 * 32)>;
 422                 };
 423
 424                 opp-2208000000 {
 425                         opp-hz = /bits/ 64 <2208000000>;
 426                         opp-peak-kBps = <(1497600 * 32)>;
 427                 };
 428         };
 429
 430         pmu {
 431                 compatible = "arm,armv8-pmuv3";
 432                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
 433         };
 434
 435         psci {
 436                 compatible = "arm,psci-1.0";
 437                 method = "smc";
 438
 439                 CPU_PD0: power-domain-cpu0 {
 440                         #power-domain-cells = <0>;
 441                         power-domains = <&CLUSTER_PD>;
 442                         domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 443                 };
 444
 445                 CPU_PD1: power-domain-cpu1 {
 446                         #power-domain-cells = <0>;
 447                         power-domains = <&CLUSTER_PD>;
 448                         domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 449                 };
 450
 451                 CPU_PD2: power-domain-cpu2 {
 452                         #power-domain-cells = <0>;
 453                         power-domains = <&CLUSTER_PD>;
 454                         domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 455                 };
 456
 457                 CPU_PD3: power-domain-cpu3 {
 458                         #power-domain-cells = <0>;
 459                         power-domains = <&CLUSTER_PD>;
 460                         domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 461                 };
 462
 463                 CPU_PD4: power-domain-cpu4 {
 464                         #power-domain-cells = <0>;
 465                         power-domains = <&CLUSTER_PD>;
 466                         domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 467                 };
 468
 469                 CPU_PD5: power-domain-cpu5 {
 470                         #power-domain-cells = <0>;
 471                         power-domains = <&CLUSTER_PD>;
 472                         domain-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
 473                 };
 474
 475                 CPU_PD6: power-domain-cpu6 {
 476                         #power-domain-cells = <0>;
 477                         power-domains = <&CLUSTER_PD>;
 478                         domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 479                 };
 480
 481                 CPU_PD7: power-domain-cpu7 {
 482                         #power-domain-cells = <0>;
 483                         power-domains = <&CLUSTER_PD>;
 484                         domain-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
 485                 };
 486
 487                 CLUSTER_PD: power-domain-cpu-cluster0 {
 488                         #power-domain-cells = <0>;
 489                         domain-idle-states = <&CLUSTER_SLEEP_0>;
 490                 };
 491         };
 492
 493         qup_opp_table: opp-table-qup {
 494                 compatible = "operating-points-v2";
 495
 496                 opp-75000000 {
 497                         opp-hz = /bits/ 64 <75000000>;
 498                         required-opps = <&rpmpd_opp_low_svs>;
 499                 };
 500
 501                 opp-100000000 {
 502                         opp-hz = /bits/ 64 <100000000>;
 503                         required-opps = <&rpmpd_opp_svs>;
 504                 };
 505
 506                 opp-128000000 {
 507                         opp-hz = /bits/ 64 <128000000>;
 508                         required-opps = <&rpmpd_opp_nom>;
 509                 };
 510         };
 511
 512         reserved_memory: reserved-memory {
 513                 #address-cells = <2>;
 514                 #size-cells = <2>;
 515                 ranges;
 516
 517                 hyp_mem: hypervisor@80000000 {
 518                         reg = <0 0x80000000 0 0x600000>;
 519                         no-map;
 520                 };
 521
 522                 xbl_aop_mem: xbl-aop@80700000 {
 523                         reg = <0 0x80700000 0 0x100000>;
 524                         no-map;
 525                 };
 526
 527                 reserved_xbl_uefi: xbl-uefi-res@80880000 {
 528                         reg = <0 0x80880000 0 0x14000>;
 529                         no-map;
 530                 };
 531
 532                 smem_mem: smem@80900000 {
 533                         compatible = "qcom,smem";
 534                         reg = <0 0x80900000 0 0x200000>;
 535                         hwlocks = <&tcsr_mutex 3>;
 536                         no-map;
 537                 };
 538
 539                 fw_mem: fw@80b00000 {
 540                         reg = <0 0x80b00000 0 0x100000>;
 541                         no-map;
 542                 };
 543
 544                 cdsp_secure_heap_mem: cdsp-sec-heap@80c00000 {
 545                         reg = <0 0x80c00000 0 0x1e00000>;
 546                         no-map;
 547                 };
 548
 549                 dfps_data_mem: dpfs-data@85e00000 {
 550                         reg = <0 0x85e00000 0 0x100000>;
 551                         no-map;
 552                 };
 553
 554                 pil_wlan_mem: pil-wlan@86500000 {
 555                         reg = <0 0x86500000 0 0x200000>;
 556                         no-map;
 557                 };
 558
 559                 pil_adsp_mem: pil-adsp@86700000 {
 560                         reg = <0 0x86700000 0 0x2000000>;
 561                         no-map;
 562                 };
 563
 564                 pil_cdsp_mem: pil-cdsp@88700000 {
 565                         reg = <0 0x88700000 0 0x1e00000>;
 566                         no-map;
 567                 };
 568
 569                 pil_video_mem: pil-video@8a500000 {
 570                         reg = <0 0x8a500000 0 0x500000>;
 571                         no-map;
 572                 };
 573
 574                 pil_ipa_fw_mem: pil-ipa-fw@8aa00000 {
 575                         reg = <0 0x8aa00000 0 0x10000>;
 576                         no-map;
 577                 };
 578
 579                 pil_ipa_gsi_mem: pil-ipa-gsi@8aa10000 {
 580                         reg = <0 0x8aa10000 0 0xa000>;
 581                         no-map;
 582                 };
 583
 584                 pil_gpu_micro_code_mem: pil-gpu-ucode@8aa1a000 {
 585                         reg = <0 0x8aa1a000 0 0x2000>;
 586                         no-map;
 587                 };
 588
 589                 pil_mpss_wlan_mem: pil-mpss-wlan@8b800000 {
 590                         reg = <0 0x8b800000 0 0x10000000>;
 591                         no-map;
 592                 };
 593
 594                 removed_mem: removed@c0000000 {
 595                         reg = <0 0xc0000000 0 0x5100000>;
 596                         no-map;
 597                 };
 598
 599                 rmtfs_mem: rmtfs@f3900000 {
 600                         compatible = "qcom,rmtfs-mem";
 601                         reg = <0 0xf3900000 0 0x280000>;
 602                         no-map;
 603
 604                         qcom,client-id = <1>;
 605                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA QCOM_SCM_VMID_NAV>;
 606                 };
 607
 608                 debug_mem: debug@ffb00000 {
 609                         reg = <0 0xffb00000 0 0xc0000>;
 610                         no-map;
 611                 };
 612
 613                 last_log_mem: lastlog@ffbc0000 {
 614                         reg = <0 0xffbc0000 0 0x80000>;
 615                         no-map;
 616                 };
 617
 618                 cmdline_region: cmdline@ffd00000 {
 619                         reg = <0 0xffd00000 0 0x1000>;
 620                         no-map;
 621                 };
 622         };
 623
 624         rpm: remoteproc {
 625                 compatible = "qcom,sm6375-rpm-proc", "qcom,rpm-proc";
 626
 627                 glink-edge {
 628                         compatible = "qcom,glink-rpm";
 629                         interrupts-extended = <&ipcc IPCC_CLIENT_AOP
 630                                                      IPCC_MPROC_SIGNAL_GLINK_QMP
 631                                                      IRQ_TYPE_EDGE_RISING>;
 632                         qcom,rpm-msg-ram = <&rpm_msg_ram>;
 633                         mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
 634
 635                         rpm_requests: rpm-requests {
 636                                 compatible = "qcom,rpm-sm6375";
 637                                 qcom,glink-channels = "rpm_requests";
 638
 639                                 rpmcc: clock-controller {
 640                                         compatible = "qcom,rpmcc-sm6375", "qcom,rpmcc";
 641                                         clocks = <&xo_board_clk>;
 642                                         clock-names = "xo";
 643                                         #clock-cells = <1>;
 644                                 };
 645
 646                                 rpmpd: power-controller {
 647                                         compatible = "qcom,sm6375-rpmpd";
 648                                         #power-domain-cells = <1>;
 649                                         operating-points-v2 = <&rpmpd_opp_table>;
 650
 651                                         rpmpd_opp_table: opp-table {
 652                                                 compatible = "operating-points-v2";
 653
 654                                                 rpmpd_opp_ret: opp1 {
 655                                                         opp-level = <RPM_SMD_LEVEL_RETENTION>;
 656                                                 };
 657
 658                                                 rpmpd_opp_min_svs: opp2 {
 659                                                         opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
 660                                                 };
 661
 662                                                 rpmpd_opp_low_svs: opp3 {
 663                                                         opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
 664                                                 };
 665
 666                                                 rpmpd_opp_svs: opp4 {
 667                                                         opp-level = <RPM_SMD_LEVEL_SVS>;
 668                                                 };
 669
 670                                                 rpmpd_opp_svs_plus: opp5 {
 671                                                         opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
 672                                                 };
 673
 674                                                 rpmpd_opp_nom: opp6 {
 675                                                         opp-level = <RPM_SMD_LEVEL_NOM>;
 676                                                 };
 677
 678                                                 rpmpd_opp_nom_plus: opp7 {
 679                                                         opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
 680                                                 };
 681
 682                                                 rpmpd_opp_turbo: opp8 {
 683                                                         opp-level = <RPM_SMD_LEVEL_TURBO>;
 684                                                 };
 685
 686                                                 rpmpd_opp_turbo_no_cpr: opp9 {
 687                                                         opp-level = <RPM_SMD_LEVEL_TURBO_NO_CPR>;
 688                                                 };
 689                                         };
 690                                 };
 691                         };
 692                 };
 693         };
 694
 695         smp2p-adsp {
 696                 compatible = "qcom,smp2p";
 697                 qcom,smem = <443>, <429>;
 698                 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
 699                                              IPCC_MPROC_SIGNAL_SMP2P
 700                                              IRQ_TYPE_EDGE_RISING>;
 701                 mboxes = <&ipcc IPCC_CLIENT_LPASS
 702                                 IPCC_MPROC_SIGNAL_SMP2P>;
 703
 704                 qcom,local-pid = <0>;
 705                 qcom,remote-pid = <2>;
 706
 707                 smp2p_adsp_out: master-kernel {
 708                         qcom,entry-name = "master-kernel";
 709                         #qcom,smem-state-cells = <1>;
 710                 };
 711
 712                 smp2p_adsp_in: slave-kernel {
 713                         qcom,entry-name = "slave-kernel";
 714                         interrupt-controller;
 715                         #interrupt-cells = <2>;
 716                 };
 717         };
 718
 719         smp2p-cdsp {
 720                 compatible = "qcom,smp2p";
 721                 qcom,smem = <94>, <432>;
 722                 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
 723                                              IPCC_MPROC_SIGNAL_SMP2P
 724                                              IRQ_TYPE_EDGE_RISING>;
 725                 mboxes = <&ipcc IPCC_CLIENT_CDSP
 726                                 IPCC_MPROC_SIGNAL_SMP2P>;
 727
 728                 qcom,local-pid = <0>;
 729                 qcom,remote-pid = <5>;
 730
 731                 smp2p_cdsp_out: master-kernel {
 732                         qcom,entry-name = "master-kernel";
 733                         #qcom,smem-state-cells = <1>;
 734                 };
 735
 736                 smp2p_cdsp_in: slave-kernel {
 737                         qcom,entry-name = "slave-kernel";
 738                         interrupt-controller;
 739                         #interrupt-cells = <2>;
 740                 };
 741         };
 742
 743         smp2p-modem {
 744                 compatible = "qcom,smp2p";
 745                 qcom,smem = <435>, <428>;
 746                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
 747                                              IPCC_MPROC_SIGNAL_SMP2P
 748                                              IRQ_TYPE_EDGE_RISING>;
 749                 mboxes = <&ipcc IPCC_CLIENT_MPSS
 750                                 IPCC_MPROC_SIGNAL_SMP2P>;
 751
 752                 qcom,local-pid = <0>;
 753                 qcom,remote-pid = <1>;
 754
 755                 smp2p_modem_out: master-kernel {
 756                         qcom,entry-name = "master-kernel";
 757                         #qcom,smem-state-cells = <1>;
 758                 };
 759
 760                 smp2p_modem_in: slave-kernel {
 761                         qcom,entry-name = "slave-kernel";
 762                         interrupt-controller;
 763                         #interrupt-cells = <2>;
 764                 };
 765
 766                 ipa_smp2p_out: ipa-ap-to-modem {
 767                         qcom,entry-name = "ipa";
 768                         #qcom,smem-state-cells = <1>;
 769                 };
 770
 771                 ipa_smp2p_in: ipa-modem-to-ap {
 772                         qcom,entry-name = "ipa";
 773                         interrupt-controller;
 774                         #interrupt-cells = <2>;
 775                 };
 776
 777                 wlan_smp2p_in: wlan-wpss-to-ap {
 778                         qcom,entry-name = "wlan";
 779                         interrupt-controller;
 780                         #interrupt-cells = <2>;
 781                 };
 782         };
 783
 784         soc: soc@0 {
 785                 #address-cells = <2>;
 786                 #size-cells = <2>;
 787                 ranges = <0 0 0 0 0x10 0>;
 788                 dma-ranges = <0 0 0 0 0x10 0>;
 789                 compatible = "simple-bus";
 790
 791                 ipcc: mailbox@208000 {
 792                         compatible = "qcom,sm6375-ipcc", "qcom,ipcc";
 793                         reg = <0 0x00208000 0 0x1000>;
 794                         interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>;
 795                         interrupt-controller;
 796                         #interrupt-cells = <3>;
 797                         #mbox-cells = <2>;
 798                 };
 799
 800                 tcsr_mutex: hwlock@340000 {
 801                         compatible = "qcom,tcsr-mutex";
 802                         reg = <0x0 0x00340000 0x0 0x40000>;
 803                         #hwlock-cells = <1>;
 804                 };
 805
 806                 tlmm: pinctrl@500000 {
 807                         compatible = "qcom,sm6375-tlmm";
 808                         reg = <0 0x00500000 0 0x800000>;
 809                         interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
 810                         gpio-ranges = <&tlmm 0 0 157>;
 811                         /* TODO: Hook up MPM as wakeup-parent when it's there */
 812                         interrupt-controller;
 813                         gpio-controller;
 814                         #interrupt-cells = <2>;
 815                         #gpio-cells = <2>;
 816
 817                         sdc2_off_state: sdc2-off-state {
 818                                 clk-pins {
 819                                         pins = "sdc2_clk";
 820                                         drive-strength = <2>;
 821                                         bias-disable;
 822                                 };
 823
 824                                 cmd-pins {
 825                                         pins = "sdc2_cmd";
 826                                         drive-strength = <2>;
 827                                         bias-pull-up;
 828                                 };
 829
 830                                 data-pins {
 831                                         pins = "sdc2_data";
 832                                         drive-strength = <2>;
 833                                         bias-pull-up;
 834                                 };
 835                         };
 836
 837                         sdc2_on_state: sdc2-on-state {
 838                                 clk-pins {
 839                                         pins = "sdc2_clk";
 840                                         drive-strength = <16>;
 841                                         bias-disable;
 842                                 };
 843
 844                                 cmd-pins {
 845                                         pins = "sdc2_cmd";
 846                                         drive-strength = <10>;
 847                                         bias-pull-up;
 848                                 };
 849
 850                                 data-pins {
 851                                         pins = "sdc2_data";
 852                                         drive-strength = <10>;
 853                                         bias-pull-up;
 854                                 };
 855                         };
 856
 857                         qup_i2c0_default: qup-i2c0-default-state {
 858                                 pins = "gpio0", "gpio1";
 859                                 function = "qup00";
 860                                 drive-strength = <2>;
 861                                 bias-pull-up;
 862                         };
 863
 864                         qup_i2c1_default: qup-i2c1-default-state {
 865                                 pins = "gpio61", "gpio62";
 866                                 function = "qup01";
 867                                 drive-strength = <2>;
 868                                 bias-pull-up;
 869                         };
 870
 871                         qup_i2c2_default: qup-i2c2-default-state {
 872                                 pins = "gpio45", "gpio46";
 873                                 function = "qup02";
 874                                 drive-strength = <2>;
 875                                 bias-pull-up;
 876                         };
 877
 878                         qup_i2c8_default: qup-i2c8-default-state {
 879                                 pins = "gpio19", "gpio20";
 880                                 /* TLMM, GCC and vendor DT all have different indices.. */
 881                                 function = "qup12";
 882                                 drive-strength = <2>;
 883                                 bias-pull-up;
 884                         };
 885
 886                         qup_i2c10_default: qup-i2c10-default-state {
 887                                 pins = "gpio4", "gpio5";
 888                                 function = "qup10";
 889                                 drive-strength = <2>;
 890                                 bias-pull-up;
 891                         };
 892
 893                         qup_spi0_default: qup-spi0-default-state {
 894                                 pins = "gpio0", "gpio1", "gpio2", "gpio3";
 895                                 function = "qup00";
 896                                 drive-strength = <6>;
 897                                 bias-disable;
 898                         };
 899                 };
 900
 901                 gcc: clock-controller@1400000 {
 902                         compatible = "qcom,sm6375-gcc";
 903                         reg = <0 0x01400000 0 0x1f0000>;
 904                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
 905                                  <&rpmcc RPM_SMD_XO_A_CLK_SRC>,
 906                                  <&sleep_clk>;
 907                         #power-domain-cells = <1>;
 908                         #clock-cells = <1>;
 909                         #reset-cells = <1>;
 910                 };
 911
 912                 usb_1_hsphy: phy@162b000 {
 913                         compatible = "qcom,sm6375-usb-hs-phy", "qcom,usb-snps-hs-7nm-phy";
 914                         reg = <0 0x0162b000 0 0x400>;
 915
 916                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
 917                         clock-names = "ref";
 918                         resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
 919                         #phy-cells = <0>;
 920
 921                         status = "disabled";
 922                 };
 923
 924                 spmi_bus: spmi@1c40000 {
 925                         compatible = "qcom,spmi-pmic-arb";
 926                         reg = <0 0x01c40000 0 0x1100>,
 927                               <0 0x01e00000 0 0x2000000>,
 928                               <0 0x03e00000 0 0x100000>,
 929                               <0 0x03f00000 0 0xa0000>,
 930                               <0 0x01c0a000 0 0x26000>;
 931                         reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
 932                         interrupt-names = "periph_irq";
 933                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 934                         qcom,ee = <0>;
 935                         qcom,channel = <0>;
 936                         #address-cells = <2>;
 937                         #size-cells = <0>;
 938                         interrupt-controller;
 939                         #interrupt-cells = <4>;
 940                 };
 941
 942                 tsens0: thermal-sensor@4411000 {
 943                         compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
 944                         reg = <0 0x04411000 0 0x140>, /* TM */
 945                               <0 0x04410000 0 0x20>;  /* SROT */
 946                         interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
 947                                      <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
 948                         interrupt-names = "uplow", "critical";
 949                         #thermal-sensor-cells = <1>;
 950                         #qcom,sensors = <15>;
 951                 };
 952
 953                 tsens1: thermal-sensor@4413000 {
 954                         compatible = "qcom,sm6375-tsens", "qcom,tsens-v2";
 955                         reg = <0 0x04413000 0 0x140>, /* TM */
 956                               <0 0x04412000 0 0x20>;  /* SROT */
 957                         interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
 958                                      <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>;
 959                         interrupt-names = "uplow", "critical";
 960                         #thermal-sensor-cells = <1>;
 961                         #qcom,sensors = <11>;
 962                 };
 963
 964                 rpm_msg_ram: sram@45f0000 {
 965                         compatible = "qcom,rpm-msg-ram";
 966                         reg = <0 0x045f0000 0 0x7000>;
 967                 };
 968
 969                 sram@4690000 {
 970                         compatible = "qcom,rpm-stats";
 971                         reg = <0 0x04690000 0 0x400>;
 972                 };
 973
 974                 sdhc_2: mmc@4784000 {
 975                         compatible = "qcom,sm6375-sdhci", "qcom,sdhci-msm-v5";
 976                         reg = <0 0x04784000 0 0x1000>;
 977
 978                         interrupts = <GIC_SPI 350 IRQ_TYPE_LEVEL_HIGH>,
 979                                      <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
 980                         interrupt-names = "hc_irq", "pwr_irq";
 981
 982                         clocks = <&gcc GCC_SDCC2_AHB_CLK>,
 983                                  <&gcc GCC_SDCC2_APPS_CLK>,
 984                                  <&rpmcc RPM_SMD_XO_CLK_SRC>;
 985                         clock-names = "iface", "core", "xo";
 986                         resets = <&gcc GCC_SDCC2_BCR>;
 987                         iommus = <&apps_smmu 0x40 0x0>;
 988
 989                         pinctrl-0 = <&sdc2_on_state>;
 990                         pinctrl-1 = <&sdc2_off_state>;
 991                         pinctrl-names = "default", "sleep";
 992
 993                         qcom,dll-config = <0x0007642c>;
 994                         qcom,ddr-config = <0x80040868>;
 995                         power-domains = <&rpmpd SM6375_VDDCX>;
 996                         operating-points-v2 = <&sdhc2_opp_table>;
 997                         bus-width = <4>;
 998
 999                         status = "disabled";
1000
1001                         sdhc2_opp_table: opp-table {
1002                                 compatible = "operating-points-v2";
1003
1004                                 opp-100000000 {
1005                                         opp-hz = /bits/ 64 <100000000>;
1006                                         required-opps = <&rpmpd_opp_low_svs>;
1007                                 };
1008
1009                                 opp-202000000 {
1010                                         opp-hz = /bits/ 64 <202000000>;
1011                                         required-opps = <&rpmpd_opp_svs_plus>;
1012                                 };
1013                         };
1014                 };
1015
1016                 gpi_dma0: dma-controller@4a00000 {
1017                         compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
1018                         reg = <0 0x04a00000 0 0x60000>;
1019                         interrupts = <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1020                                      <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1021                                      <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
1022                                      <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
1023                                      <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
1024                                      <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
1025                                      <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
1026                                      <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
1027                                      <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
1028                                      <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1029                         dma-channels = <10>;
1030                         dma-channel-mask = <0x1f>;
1031                         iommus = <&apps_smmu 0x16 0x0>;
1032                         #dma-cells = <3>;
1033                         status = "disabled";
1034                 };
1035
1036                 qupv3_id_0: geniqup@4ac0000 {
1037                         compatible = "qcom,geni-se-qup";
1038                         reg = <0x0 0x04ac0000 0x0 0x2000>;
1039                         clock-names = "m-ahb", "s-ahb";
1040                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
1041                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
1042                         iommus = <&apps_smmu 0x3 0x0>;
1043                         #address-cells = <2>;
1044                         #size-cells = <2>;
1045                         ranges;
1046                         status = "disabled";
1047
1048                         i2c0: i2c@4a80000 {
1049                                 compatible = "qcom,geni-i2c";
1050                                 reg = <0x0 0x04a80000 0x0 0x4000>;
1051                                 clock-names = "se";
1052                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1053                                 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
1054                                 pinctrl-names = "default";
1055                                 pinctrl-0 = <&qup_i2c0_default>;
1056                                 dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
1057                                        <&gpi_dma0 1 0 QCOM_GPI_I2C>;
1058                                 dma-names = "tx", "rx";
1059                                 #address-cells = <1>;
1060                                 #size-cells = <0>;
1061                                 status = "disabled";
1062                         };
1063
1064                         spi0: spi@4a80000 {
1065                                 compatible = "qcom,geni-spi";
1066                                 reg = <0x0 0x04a80000 0x0 0x4000>;
1067                                 clock-names = "se";
1068                                 clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
1069                                 interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
1070                                 pinctrl-names = "default";
1071                                 pinctrl-0 = <&qup_spi0_default>;
1072                                 power-domains = <&rpmpd SM6375_VDDCX>;
1073                                 operating-points-v2 = <&qup_opp_table>;
1074                                 dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
1075                                        <&gpi_dma0 1 0 QCOM_GPI_SPI>;
1076                                 dma-names = "tx", "rx";
1077                                 #address-cells = <1>;
1078                                 #size-cells = <0>;
1079                                 status = "disabled";
1080                         };
1081
1082                         i2c1: i2c@4a84000 {
1083                                 compatible = "qcom,geni-i2c";
1084                                 reg = <0x0 0x04a84000 0x0 0x4000>;
1085                                 clock-names = "se";
1086                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1087                                 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
1088                                 pinctrl-names = "default";
1089                                 pinctrl-0 = <&qup_i2c1_default>;
1090                                 dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
1091                                        <&gpi_dma0 1 1 QCOM_GPI_I2C>;
1092                                 dma-names = "tx", "rx";
1093                                 #address-cells = <1>;
1094                                 #size-cells = <0>;
1095                                 status = "disabled";
1096                         };
1097
1098                         spi1: spi@4a84000 {
1099                                 compatible = "qcom,geni-spi";
1100                                 reg = <0x0 0x04a84000 0x0 0x4000>;
1101                                 clock-names = "se";
1102                                 clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
1103                                 interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
1104                                 power-domains = <&rpmpd SM6375_VDDCX>;
1105                                 operating-points-v2 = <&qup_opp_table>;
1106                                 dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
1107                                        <&gpi_dma0 1 1 QCOM_GPI_SPI>;
1108                                 dma-names = "tx", "rx";
1109                                 #address-cells = <1>;
1110                                 #size-cells = <0>;
1111                                 status = "disabled";
1112                         };
1113
1114                         i2c2: i2c@4a88000 {
1115                                 compatible = "qcom,geni-i2c";
1116                                 reg = <0x0 0x04a88000 0x0 0x4000>;
1117                                 clock-names = "se";
1118                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1119                                 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
1120                                 pinctrl-names = "default";
1121                                 pinctrl-0 = <&qup_i2c2_default>;
1122                                 dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
1123                                        <&gpi_dma0 1 2 QCOM_GPI_I2C>;
1124                                 dma-names = "tx", "rx";
1125                                 #address-cells = <1>;
1126                                 #size-cells = <0>;
1127                                 status = "disabled";
1128                         };
1129
1130                         spi2: spi@4a88000 {
1131                                 compatible = "qcom,geni-spi";
1132                                 reg = <0x0 0x04a88000 0x0 0x4000>;
1133                                 clock-names = "se";
1134                                 clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
1135                                 interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
1136                                 power-domains = <&rpmpd SM6375_VDDCX>;
1137                                 operating-points-v2 = <&qup_opp_table>;
1138                                 dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
1139                                        <&gpi_dma0 1 2 QCOM_GPI_SPI>;
1140                                 dma-names = "tx", "rx";
1141                                 #address-cells = <1>;
1142                                 #size-cells = <0>;
1143                                 status = "disabled";
1144                         };
1145
1146                         /*
1147                          * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
1148                          * There is a comment in the included DTSI of another SoC saying that they
1149                          * are not "bolled out" (probably meaning not routed to solder balls)
1150                          * TLMM driver however, suggests there are as many as 15 QUPs in total!
1151                          * Most of which don't even have pin configurations for.. Sad stuff!
1152                          */
1153                 };
1154
1155                 gpi_dma1: dma-controller@4c00000 {
1156                         compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
1157                         reg = <0 0x04c00000 0 0x60000>;
1158                         interrupts = <GIC_SPI 497 IRQ_TYPE_LEVEL_HIGH>,
1159                                      <GIC_SPI 498 IRQ_TYPE_LEVEL_HIGH>,
1160                                      <GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
1161                                      <GIC_SPI 500 IRQ_TYPE_LEVEL_HIGH>,
1162                                      <GIC_SPI 501 IRQ_TYPE_LEVEL_HIGH>,
1163                                      <GIC_SPI 502 IRQ_TYPE_LEVEL_HIGH>,
1164                                      <GIC_SPI 503 IRQ_TYPE_LEVEL_HIGH>,
1165                                      <GIC_SPI 504 IRQ_TYPE_LEVEL_HIGH>,
1166                                      <GIC_SPI 505 IRQ_TYPE_LEVEL_HIGH>,
1167                                      <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
1168                         dma-channels = <10>;
1169                         dma-channel-mask = <0x1f>;
1170                         iommus = <&apps_smmu 0xd6 0x0>;
1171                         #dma-cells = <3>;
1172                         status = "disabled";
1173                 };
1174
1175                 qupv3_id_1: geniqup@4cc0000 {
1176                         compatible = "qcom,geni-se-qup";
1177                         reg = <0x0 0x04cc0000 0x0 0x2000>;
1178                         clock-names = "m-ahb", "s-ahb";
1179                         clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
1180                                  <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
1181                         iommus = <&apps_smmu 0xc3 0x0>;
1182                         #address-cells = <2>;
1183                         #size-cells = <2>;
1184                         ranges;
1185                         status = "disabled";
1186
1187                         i2c6: i2c@4c80000 {
1188                                 compatible = "qcom,geni-i2c";
1189                                 reg = <0x0 0x04c80000 0x0 0x4000>;
1190                                 clock-names = "se";
1191                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1192                                 interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
1193                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
1194                                        <&gpi_dma1 1 0 QCOM_GPI_I2C>;
1195                                 dma-names = "tx", "rx";
1196                                 #address-cells = <1>;
1197                                 #size-cells = <0>;
1198                                 status = "disabled";
1199                         };
1200
1201                         spi6: spi@4c80000 {
1202                                 compatible = "qcom,geni-spi";
1203                                 reg = <0x0 0x04c80000 0x0 0x4000>;
1204                                 clock-names = "se";
1205                                 clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
1206                                 interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
1207                                 power-domains = <&rpmpd SM6375_VDDCX>;
1208                                 operating-points-v2 = <&qup_opp_table>;
1209                                 dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
1210                                        <&gpi_dma1 1 0 QCOM_GPI_SPI>;
1211                                 dma-names = "tx", "rx";
1212                                 #address-cells = <1>;
1213                                 #size-cells = <0>;
1214                                 status = "disabled";
1215                         };
1216
1217                         i2c7: i2c@4c84000 {
1218                                 compatible = "qcom,geni-i2c";
1219                                 reg = <0x0 0x04c84000 0x0 0x4000>;
1220                                 clock-names = "se";
1221                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1222                                 interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
1223                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
1224                                        <&gpi_dma1 1 1 QCOM_GPI_I2C>;
1225                                 dma-names = "tx", "rx";
1226                                 #address-cells = <1>;
1227                                 #size-cells = <0>;
1228                                 status = "disabled";
1229                         };
1230
1231                         spi7: spi@4c84000 {
1232                                 compatible = "qcom,geni-spi";
1233                                 reg = <0x0 0x04c84000 0x0 0x4000>;
1234                                 clock-names = "se";
1235                                 clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
1236                                 interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
1237                                 power-domains = <&rpmpd SM6375_VDDCX>;
1238                                 operating-points-v2 = <&qup_opp_table>;
1239                                 dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
1240                                        <&gpi_dma1 1 1 QCOM_GPI_SPI>;
1241                                 dma-names = "tx", "rx";
1242                                 #address-cells = <1>;
1243                                 #size-cells = <0>;
1244                                 status = "disabled";
1245                         };
1246
1247                         i2c8: i2c@4c88000 {
1248                                 compatible = "qcom,geni-i2c";
1249                                 reg = <0x0 0x04c88000 0x0 0x4000>;
1250                                 clock-names = "se";
1251                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1252                                 interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
1253                                 pinctrl-names = "default";
1254                                 pinctrl-0 = <&qup_i2c8_default>;
1255                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
1256                                        <&gpi_dma1 1 2 QCOM_GPI_I2C>;
1257                                 dma-names = "tx", "rx";
1258                                 #address-cells = <1>;
1259                                 #size-cells = <0>;
1260                                 status = "disabled";
1261                         };
1262
1263                         spi8: spi@4c88000 {
1264                                 compatible = "qcom,geni-spi";
1265                                 reg = <0x0 0x04c88000 0x0 0x4000>;
1266                                 clock-names = "se";
1267                                 clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
1268                                 interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
1269                                 power-domains = <&rpmpd SM6375_VDDCX>;
1270                                 operating-points-v2 = <&qup_opp_table>;
1271                                 dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
1272                                        <&gpi_dma1 1 2 QCOM_GPI_SPI>;
1273                                 dma-names = "tx", "rx";
1274                                 #address-cells = <1>;
1275                                 #size-cells = <0>;
1276                                 status = "disabled";
1277                         };
1278
1279                         i2c9: i2c@4c8c000 {
1280                                 compatible = "qcom,geni-i2c";
1281                                 reg = <0x0 0x04c8c000 0x0 0x4000>;
1282                                 clock-names = "se";
1283                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1284                                 interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
1285                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
1286                                        <&gpi_dma1 1 3 QCOM_GPI_I2C>;
1287                                 dma-names = "tx", "rx";
1288                                 #address-cells = <1>;
1289                                 #size-cells = <0>;
1290                                 status = "disabled";
1291                         };
1292
1293                         spi9: spi@4c8c000 {
1294                                 compatible = "qcom,geni-spi";
1295                                 reg = <0x0 0x04c8c000 0x0 0x4000>;
1296                                 clock-names = "se";
1297                                 clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
1298                                 interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
1299                                 power-domains = <&rpmpd SM6375_VDDCX>;
1300                                 operating-points-v2 = <&qup_opp_table>;
1301                                 dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
1302                                        <&gpi_dma1 1 3 QCOM_GPI_SPI>;
1303                                 dma-names = "tx", "rx";
1304                                 #address-cells = <1>;
1305                                 #size-cells = <0>;
1306                                 status = "disabled";
1307                         };
1308
1309                         i2c10: i2c@4c90000 {
1310                                 compatible = "qcom,geni-i2c";
1311                                 reg = <0x0 0x04c90000 0x0 0x4000>;
1312                                 clock-names = "se";
1313                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1314                                 interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
1315                                 pinctrl-names = "default";
1316                                 pinctrl-0 = <&qup_i2c10_default>;
1317                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
1318                                        <&gpi_dma1 1 4 QCOM_GPI_I2C>;
1319                                 dma-names = "tx", "rx";
1320                                 #address-cells = <1>;
1321                                 #size-cells = <0>;
1322                                 status = "disabled";
1323                         };
1324
1325                         spi10: spi@4c90000 {
1326                                 compatible = "qcom,geni-spi";
1327                                 reg = <0x0 0x04c90000 0x0 0x4000>;
1328                                 clock-names = "se";
1329                                 clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
1330                                 interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
1331                                 power-domains = <&rpmpd SM6375_VDDCX>;
1332                                 operating-points-v2 = <&qup_opp_table>;
1333                                 dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
1334                                        <&gpi_dma1 1 4 QCOM_GPI_SPI>;
1335                                 dma-names = "tx", "rx";
1336                                 #address-cells = <1>;
1337                                 #size-cells = <0>;
1338                                 status = "disabled";
1339                         };
1340                 };
1341
1342                 usb_1: usb@4ef8800 {
1343                         compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
1344                         reg = <0 0x04ef8800 0 0x400>;
1345
1346                         clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
1347                                  <&gcc GCC_USB30_PRIM_MASTER_CLK>,
1348                                  <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>,
1349                                  <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
1350                                  <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1351                                  <&gcc GCC_USB3_PRIM_CLKREF_CLK>;
1352                         clock-names = "cfg_noc",
1353                                       "core",
1354                                       "iface",
1355                                       "sleep",
1356                                       "mock_utmi",
1357                                       "xo";
1358
1359                         assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
1360                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
1361                         assigned-clock-rates = <19200000>, <133333333>;
1362
1363                         interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH>,
1364                                      <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1365                                      <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
1366                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
1367                         interrupt-names = "hs_phy_irq",
1368                                           "ss_phy_irq",
1369                                           "dm_hs_phy_irq",
1370                                           "dp_hs_phy_irq";
1371
1372                         power-domains = <&gcc USB30_PRIM_GDSC>;
1373
1374                         resets = <&gcc GCC_USB30_PRIM_BCR>;
1375
1376                         /*
1377                          * This property is there to allow USB2 to work, as
1378                          * USB3 is not implemented yet - (re)move it when
1379                          * proper support is in place.
1380                          */
1381                         qcom,select-utmi-as-pipe-clk;
1382
1383                         #address-cells = <2>;
1384                         #size-cells = <2>;
1385                         ranges;
1386
1387                         status = "disabled";
1388
1389                         usb_1_dwc3: usb@4e00000 {
1390                                 compatible = "snps,dwc3";
1391                                 reg = <0 0x04e00000 0 0xcd00>;
1392                                 interrupts = <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>;
1393                                 maximum-speed = "high-speed";
1394                                 phys = <&usb_1_hsphy>;
1395                                 phy-names = "usb2-phy";
1396                                 iommus = <&apps_smmu 0xe0 0x0>;
1397
1398                                 /* Yes, this impl *does* have an unfunny number of quirks.. */
1399                                 snps,hird-threshold = /bits/ 8 <0x10>;
1400                                 snps,usb2-gadget-lpm-disable;
1401                                 snps,dis_u2_susphy_quirk;
1402                                 snps,is-utmi-l1-suspend;
1403                                 snps,dis-u1-entry-quirk;
1404                                 snps,dis-u2-entry-quirk;
1405                                 snps,usb3_lpm_capable;
1406                                 snps,has-lpm-erratum;
1407                                 tx-fifo-resize;
1408                         };
1409                 };
1410
1411                 adreno_smmu: iommu@5940000 {
1412                         compatible = "qcom,sm6375-smmu-v2", "qcom,smmu-v2";
1413                         reg = <0 0x05940000 0 0x10000>;
1414                         #iommu-cells = <1>;
1415                         #global-interrupts = <2>;
1416                         interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
1417                                      <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
1418                                      <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
1419                                      <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
1420                                      <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
1421                                      <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
1422                                      <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
1423                                      <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
1424                                      <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
1425                                      <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
1426
1427                         clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
1428                         clock-names = "bus";
1429
1430                         power-domains = <&gpucc GPU_CX_GDSC>;
1431                 };
1432
1433                 gpucc: clock-controller@5990000 {
1434                         compatible = "qcom,sm6375-gpucc";
1435                         reg = <0 0x05990000 0 0x9000>;
1436                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>,
1437                                  <&gcc GCC_GPU_GPLL0_CLK_SRC>,
1438                                  <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>,
1439                                  <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>;
1440                         power-domains = <&rpmpd SM6375_VDDGX>;
1441                         required-opps = <&rpmpd_opp_low_svs>;
1442                         #clock-cells = <1>;
1443                         #reset-cells = <1>;
1444                         #power-domain-cells = <1>;
1445                 };
1446
1447                 remoteproc_mss: remoteproc@6000000 {
1448                         compatible = "qcom,sm6375-mpss-pas";
1449                         reg = <0 0x06000000 0 0x4040>;
1450
1451                         interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>,
1452                                               <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
1453                                               <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
1454                                               <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
1455                                               <&smp2p_modem_in 3 IRQ_TYPE_EDGE_RISING>,
1456                                               <&smp2p_modem_in 7 IRQ_TYPE_EDGE_RISING>;
1457                         interrupt-names = "wdog",
1458                                           "fatal",
1459                                           "ready",
1460                                           "handover",
1461                                           "stop-ack",
1462                                           "shutdown-ack";
1463
1464                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
1465                         clock-names = "xo";
1466
1467                         power-domains = <&rpmpd SM6375_VDDCX>;
1468                         power-domain-names = "cx";
1469
1470                         memory-region = <&pil_mpss_wlan_mem>;
1471
1472                         qcom,smem-states = <&smp2p_modem_out 0>;
1473                         qcom,smem-state-names = "stop";
1474
1475                         status = "disabled";
1476
1477                         glink-edge {
1478                                 interrupts-extended = <&ipcc IPCC_CLIENT_MPSS
1479                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
1480                                                              IRQ_TYPE_EDGE_RISING>;
1481                                 mboxes = <&ipcc IPCC_CLIENT_MPSS
1482                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
1483                                 label = "modem";
1484                                 qcom,remote-pid = <1>;
1485                         };
1486                 };
1487
1488                 remoteproc_adsp: remoteproc@a400000 {
1489                         compatible = "qcom,sm6375-adsp-pas";
1490                         reg = <0 0x0a400000 0 0x100>;
1491
1492                         interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
1493                                               <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
1494                                               <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
1495                                               <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
1496                                               <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
1497                         interrupt-names = "wdog", "fatal", "ready",
1498                                           "handover", "stop-ack";
1499
1500                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
1501                         clock-names = "xo";
1502
1503                         power-domains = <&rpmpd SM6375_VDD_LPI_CX>,
1504                                         <&rpmpd SM6375_VDD_LPI_MX>;
1505                         power-domain-names = "lcx", "lmx";
1506
1507                         memory-region = <&pil_adsp_mem>;
1508
1509                         qcom,smem-states = <&smp2p_adsp_out 0>;
1510                         qcom,smem-state-names = "stop";
1511
1512                         status = "disabled";
1513
1514                         glink-edge {
1515                                 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
1516                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
1517                                                              IRQ_TYPE_EDGE_RISING>;
1518                                 mboxes = <&ipcc IPCC_CLIENT_LPASS
1519                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
1520
1521                                 label = "lpass";
1522                                 qcom,remote-pid = <2>;
1523                         };
1524                 };
1525
1526                 remoteproc_cdsp: remoteproc@b000000 {
1527                         compatible = "qcom,sm6375-cdsp-pas";
1528                         reg = <0x0 0x0b000000 0x0 0x100000>;
1529
1530                         interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>,
1531                                               <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
1532                                               <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
1533                                               <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
1534                                               <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>;
1535                         interrupt-names = "wdog", "fatal", "ready",
1536                                           "handover", "stop-ack";
1537
1538                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
1539                         clock-names = "xo";
1540
1541                         power-domains = <&rpmpd SM6375_VDDCX>;
1542                         power-domain-names = "cx";
1543
1544                         memory-region = <&pil_cdsp_mem>;
1545
1546                         qcom,smem-states = <&smp2p_cdsp_out 0>;
1547                         qcom,smem-state-names = "stop";
1548
1549                         status = "disabled";
1550
1551                         glink-edge {
1552                                 interrupts-extended = <&ipcc IPCC_CLIENT_CDSP
1553                                                              IPCC_MPROC_SIGNAL_GLINK_QMP
1554                                                              IRQ_TYPE_EDGE_RISING>;
1555                                 mboxes = <&ipcc IPCC_CLIENT_CDSP
1556                                                 IPCC_MPROC_SIGNAL_GLINK_QMP>;
1557                                 label = "cdsp";
1558                                 qcom,remote-pid = <5>;
1559                         };
1560                 };
1561
1562                 sram@c125000 {
1563                         compatible = "qcom,sm6375-imem", "syscon", "simple-mfd";
1564                         reg = <0 0x0c125000 0 0x1000>;
1565                         ranges = <0 0 0x0c125000 0x1000>;
1566
1567                         #address-cells = <1>;
1568                         #size-cells = <1>;
1569
1570                         pil-reloc@94c {
1571                                 compatible = "qcom,pil-reloc-info";
1572                                 reg = <0x94c 0xc8>;
1573                         };
1574                 };
1575
1576                 apps_smmu: iommu@c600000 {
1577                         compatible = "qcom,sm6375-smmu-500", "arm,mmu-500";
1578                         reg = <0 0x0c600000 0 0x100000>;
1579                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
1580                                      <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
1581                                      <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
1582                                      <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
1583                                      <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
1584                                      <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
1585                                      <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
1586                                      <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
1587                                      <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
1588                                      <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
1589                                      <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
1590                                      <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
1591                                      <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
1592                                      <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
1593                                      <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
1594                                      <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
1595                                      <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1596                                      <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
1597                                      <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
1598                                      <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
1599                                      <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
1600                                      <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
1601                                      <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
1602                                      <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
1603                                      <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
1604                                      <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
1605                                      <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
1606                                      <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
1607                                      <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
1608                                      <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
1609                                      <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
1610                                      <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
1611                                      <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
1612                                      <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
1613                                      <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
1614                                      <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1615                                      <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
1616                                      <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1617                                      <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
1618                                      <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
1619                                      <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
1620                                      <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
1621                                      <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
1622                                      <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
1623                                      <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
1624                                      <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
1625                                      <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
1626                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
1627                                      <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
1628                                      <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
1629                                      <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
1630                                      <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
1631                                      <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
1632                                      <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
1633                                      <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
1634                                      <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
1635                                      <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
1636                                      <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1637                                      <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
1638                                      <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
1639                                      <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
1640                                      <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1641                                      <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
1642                                      <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1643                                      <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1644
1645                         power-domains = <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_RT_GDSC>,
1646                                         <&gcc HLOS1_VOTE_MM_SNOC_MMU_TBU_NRT_GDSC>,
1647                                         <&gcc HLOS1_VOTE_TURING_MMU_TBU0_GDSC>;
1648                         #global-interrupts = <1>;
1649                         #iommu-cells = <2>;
1650                 };
1651
1652                 wifi: wifi@c800000 {
1653                         compatible = "qcom,wcn3990-wifi";
1654                         reg = <0 0x0c800000 0 0x800000>;
1655                         reg-names = "membase";
1656                         memory-region = <&pil_wlan_mem>;
1657                         interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>,
1658                                      <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>,
1659                                      <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
1660                                      <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
1661                                      <GIC_SPI 362 IRQ_TYPE_LEVEL_HIGH>,
1662                                      <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>,
1663                                      <GIC_SPI 364 IRQ_TYPE_LEVEL_HIGH>,
1664                                      <GIC_SPI 365 IRQ_TYPE_LEVEL_HIGH>,
1665                                      <GIC_SPI 366 IRQ_TYPE_LEVEL_HIGH>,
1666                                      <GIC_SPI 367 IRQ_TYPE_LEVEL_HIGH>,
1667                                      <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>,
1668                                      <GIC_SPI 369 IRQ_TYPE_LEVEL_HIGH>;
1669                         iommus = <&apps_smmu 0x80 0x1>;
1670                         qcom,msa-fixed-perm;
1671                         status = "disabled";
1672                 };
1673
1674                 intc: interrupt-controller@f200000 {
1675                         compatible = "arm,gic-v3";
1676                         reg = <0x0 0x0f200000 0x0 0x10000>,  /* GICD */
1677                               <0x0 0x0f240000 0x0 0x100000>; /* GICR * 8 */
1678                         interrupts = <GIC_PPI 8 IRQ_TYPE_LEVEL_HIGH>;
1679                         #redistributor-regions = <1>;
1680                         #interrupt-cells = <3>;
1681                         redistributor-stride = <0 0x20000>;
1682                         interrupt-controller;
1683                 };
1684
1685                 timer@f420000 {
1686                         compatible = "arm,armv7-timer-mem";
1687                         reg = <0 0x0f420000 0 0x1000>;
1688                         ranges = <0 0 0 0x20000000>;
1689                         #address-cells = <1>;
1690                         #size-cells = <1>;
1691
1692                         frame@f421000 {
1693                                 reg = <0x0f421000 0x1000>, <0x0f422000 0x1000>;
1694                                 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1695                                              <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
1696                                 frame-number = <0>;
1697                         };
1698
1699                         frame@f423000 {
1700                                 reg = <0x0f243000 0x1000>;
1701                                 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1702                                 frame-number = <1>;
1703                                 status = "disabled";
1704                         };
1705
1706                         frame@f425000 {
1707                                 reg = <0x0f425000 0x1000>;
1708                                 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1709                                 frame-number = <2>;
1710                                 status = "disabled";
1711                         };
1712
1713                         frame@f427000 {
1714                                 reg = <0x0f427000 0x1000>;
1715                                 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1716                                 frame-number = <3>;
1717                                 status = "disabled";
1718                         };
1719
1720                         frame@f429000 {
1721                                 reg = <0x0f429000 0x1000>;
1722                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1723                                 frame-number = <4>;
1724                                 status = "disabled";
1725                         };
1726
1727                         frame@f42b000 {
1728                                 reg = <0x0f42b000 0x1000>;
1729                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1730                                 frame-number = <5>;
1731                                 status = "disabled";
1732                         };
1733
1734                         frame@f42d000 {
1735                                 reg = <0x0f42d000 0x1000>;
1736                                 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1737                                 frame-number = <6>;
1738                                 status = "disabled";
1739                         };
1740                 };
1741
1742                 cpucp_l3: interconnect@fd90000 {
1743                         compatible = "qcom,sm6375-cpucp-l3", "qcom,epss-l3";
1744                         reg = <0 0x0fd90000 0 0x1000>;
1745
1746                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
1747                         clock-names = "xo", "alternate";
1748                         #interconnect-cells = <1>;
1749                 };
1750
1751                 cpufreq_hw: cpufreq@fd91000 {
1752                         compatible = "qcom,sm6375-cpufreq-epss", "qcom,cpufreq-epss";
1753                         reg = <0 0x0fd91000 0 0x1000>, <0 0x0fd92000 0 0x1000>;
1754                         reg-names = "freq-domain0", "freq-domain1";
1755
1756                         clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GPLL0>;
1757                         clock-names = "xo", "alternate";
1758                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
1759                                      <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
1760                         interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1";
1761                         #freq-domain-cells = <1>;
1762                         #clock-cells = <1>;
1763                 };
1764         };
1765
1766         thermal-zones {
1767                 mapss0-thermal {
1768                         polling-delay-passive = <0>;
1769                         polling-delay = <0>;
1770
1771                         thermal-sensors = <&tsens0 0>;
1772
1773                         trips {
1774                                 mapss0_alert0: trip-point0 {
1775                                         temperature = <90000>;
1776                                         hysteresis = <2000>;
1777                                         type = "passive";
1778                                 };
1779
1780                                 mapss0_alert1: trip-point1 {
1781                                         temperature = <95000>;
1782                                         hysteresis = <2000>;
1783                                         type = "passive";
1784                                 };
1785
1786                                 mapss0_crit: mapss-crit {
1787                                         temperature = <110000>;
1788                                         hysteresis = <1000>;
1789                                         type = "critical";
1790                                 };
1791                         };
1792                 };
1793
1794                 cpu0-thermal {
1795                         polling-delay-passive = <0>;
1796                         polling-delay = <0>;
1797
1798                         thermal-sensors = <&tsens0 1>;
1799
1800                         trips {
1801                                 cpu0_alert0: trip-point0 {
1802                                         temperature = <90000>;
1803                                         hysteresis = <2000>;
1804                                         type = "passive";
1805                                 };
1806
1807                                 cpu0_alert1: trip-point1 {
1808                                         temperature = <95000>;
1809                                         hysteresis = <2000>;
1810                                         type = "passive";
1811                                 };
1812
1813                                 cpu0_crit: cpu-crit {
1814                                         temperature = <110000>;
1815                                         hysteresis = <1000>;
1816                                         type = "critical";
1817                                 };
1818                         };
1819                 };
1820
1821                 cpu1-thermal {
1822                         polling-delay-passive = <0>;
1823                         polling-delay = <0>;
1824
1825                         thermal-sensors = <&tsens0 2>;
1826
1827                         trips {
1828                                 cpu1_alert0: trip-point0 {
1829                                         temperature = <90000>;
1830                                         hysteresis = <2000>;
1831                                         type = "passive";
1832                                 };
1833
1834                                 cpu1_alert1: trip-point1 {
1835                                         temperature = <95000>;
1836                                         hysteresis = <2000>;
1837                                         type = "passive";
1838                                 };
1839
1840                                 cpu1_crit: cpu-crit {
1841                                         temperature = <110000>;
1842                                         hysteresis = <1000>;
1843                                         type = "critical";
1844                                 };
1845                         };
1846                 };
1847
1848                 cpu2-thermal {
1849                         polling-delay-passive = <0>;
1850                         polling-delay = <0>;
1851
1852                         thermal-sensors = <&tsens0 3>;
1853
1854                         trips {
1855                                 cpu2_alert0: trip-point0 {
1856                                         temperature = <90000>;
1857                                         hysteresis = <2000>;
1858                                         type = "passive";
1859                                 };
1860
1861                                 cpu2_alert1: trip-point1 {
1862                                         temperature = <95000>;
1863                                         hysteresis = <2000>;
1864                                         type = "passive";
1865                                 };
1866
1867                                 cpu2_crit: cpu-crit {
1868                                         temperature = <110000>;
1869                                         hysteresis = <1000>;
1870                                         type = "critical";
1871                                 };
1872                         };
1873                 };
1874
1875                 cpu3-thermal {
1876                         polling-delay-passive = <0>;
1877                         polling-delay = <0>;
1878
1879                         thermal-sensors = <&tsens0 4>;
1880
1881                         trips {
1882                                 cpu3_alert0: trip-point0 {
1883                                         temperature = <90000>;
1884                                         hysteresis = <2000>;
1885                                         type = "passive";
1886                                 };
1887
1888                                 cpu3_alert1: trip-point1 {
1889                                         temperature = <95000>;
1890                                         hysteresis = <2000>;
1891                                         type = "passive";
1892                                 };
1893
1894                                 cpu3_crit: cpu-crit {
1895                                         temperature = <110000>;
1896                                         hysteresis = <1000>;
1897                                         type = "critical";
1898                                 };
1899                         };
1900                 };
1901
1902                 cpu4-thermal {
1903                         polling-delay-passive = <0>;
1904                         polling-delay = <0>;
1905
1906                         thermal-sensors = <&tsens0 5>;
1907
1908                         trips {
1909                                 cpu4_alert0: trip-point0 {
1910                                         temperature = <90000>;
1911                                         hysteresis = <2000>;
1912                                         type = "passive";
1913                                 };
1914
1915                                 cpu4_alert1: trip-point1 {
1916                                         temperature = <95000>;
1917                                         hysteresis = <2000>;
1918                                         type = "passive";
1919                                 };
1920
1921                                 cpu4_crit: cpu-crit {
1922                                         temperature = <110000>;
1923                                         hysteresis = <1000>;
1924                                         type = "critical";
1925                                 };
1926                         };
1927                 };
1928
1929                 cpu5-thermal {
1930                         polling-delay-passive = <0>;
1931                         polling-delay = <0>;
1932
1933                         thermal-sensors = <&tsens0 6>;
1934
1935                         trips {
1936                                 cpu5_alert0: trip-point0 {
1937                                         temperature = <90000>;
1938                                         hysteresis = <2000>;
1939                                         type = "passive";
1940                                 };
1941
1942                                 cpu5_alert1: trip-point1 {
1943                                         temperature = <95000>;
1944                                         hysteresis = <2000>;
1945                                         type = "passive";
1946                                 };
1947
1948                                 cpu5_crit: cpu-crit {
1949                                         temperature = <110000>;
1950                                         hysteresis = <1000>;
1951                                         type = "critical";
1952                                 };
1953                         };
1954                 };
1955
1956                 cluster0-thermal {
1957                         polling-delay-passive = <0>;
1958                         polling-delay = <0>;
1959
1960                         thermal-sensors = <&tsens0 7>;
1961
1962                         trips {
1963                                 cluster0_alert0: trip-point0 {
1964                                         temperature = <90000>;
1965                                         hysteresis = <2000>;
1966                                         type = "passive";
1967                                 };
1968
1969                                 cluster0_alert1: trip-point1 {
1970                                         temperature = <95000>;
1971                                         hysteresis = <2000>;
1972                                         type = "passive";
1973                                 };
1974
1975                                 cluster0_crit: cpu-crit {
1976                                         temperature = <110000>;
1977                                         hysteresis = <1000>;
1978                                         type = "critical";
1979                                 };
1980                         };
1981                 };
1982
1983                 cluster1-thermal {
1984                         polling-delay-passive = <0>;
1985                         polling-delay = <0>;
1986
1987                         thermal-sensors = <&tsens0 8>;
1988
1989                         trips {
1990                                 cluster1_alert0: trip-point0 {
1991                                         temperature = <90000>;
1992                                         hysteresis = <2000>;
1993                                         type = "passive";
1994                                 };
1995
1996                                 cluster1_alert1: trip-point1 {
1997                                         temperature = <95000>;
1998                                         hysteresis = <2000>;
1999                                         type = "passive";
2000                                 };
2001
2002                                 cluster1_crit: cpu-crit {
2003                                         temperature = <110000>;
2004                                         hysteresis = <1000>;
2005                                         type = "critical";
2006                                 };
2007                         };
2008                 };
2009
2010                 cpu6-thermal {
2011                         polling-delay-passive = <0>;
2012                         polling-delay = <0>;
2013
2014                         thermal-sensors = <&tsens0 9>;
2015
2016                         trips {
2017                                 cpu6_alert0: trip-point0 {
2018                                         temperature = <90000>;
2019                                         hysteresis = <2000>;
2020                                         type = "passive";
2021                                 };
2022
2023                                 cpu6_alert1: trip-point1 {
2024                                         temperature = <95000>;
2025                                         hysteresis = <2000>;
2026                                         type = "passive";
2027                                 };
2028
2029                                 cpu6_crit: cpu-crit {
2030                                         temperature = <110000>;
2031                                         hysteresis = <1000>;
2032                                         type = "critical";
2033                                 };
2034                         };
2035                 };
2036
2037                 cpu7-thermal {
2038                         polling-delay-passive = <0>;
2039                         polling-delay = <0>;
2040
2041                         thermal-sensors = <&tsens0 10>;
2042
2043                         trips {
2044                                 cpu7_alert0: trip-point0 {
2045                                         temperature = <90000>;
2046                                         hysteresis = <2000>;
2047                                         type = "passive";
2048                                 };
2049
2050                                 cpu7_alert1: trip-point1 {
2051                                         temperature = <95000>;
2052                                         hysteresis = <2000>;
2053                                         type = "passive";
2054                                 };
2055
2056                                 cpu7_crit: cpu-crit {
2057                                         temperature = <110000>;
2058                                         hysteresis = <1000>;
2059                                         type = "critical";
2060                                 };
2061                         };
2062                 };
2063
2064                 cpu-unk0-thermal {
2065                         polling-delay-passive = <0>;
2066                         polling-delay = <0>;
2067
2068                         thermal-sensors = <&tsens0 11>;
2069
2070                         trips {
2071                                 cpu_unk0_alert0: trip-point0 {
2072                                         temperature = <90000>;
2073                                         hysteresis = <2000>;
2074                                         type = "passive";
2075                                 };
2076
2077                                 cpu_unk0_alert1: trip-point1 {
2078                                         temperature = <95000>;
2079                                         hysteresis = <2000>;
2080                                         type = "passive";
2081                                 };
2082
2083                                 cpu_unk0_crit: cpu-crit {
2084                                         temperature = <110000>;
2085                                         hysteresis = <1000>;
2086                                         type = "critical";
2087                                 };
2088                         };
2089                 };
2090
2091                 cpu-unk1-thermal {
2092                         polling-delay-passive = <0>;
2093                         polling-delay = <0>;
2094
2095                         thermal-sensors = <&tsens0 12>;
2096
2097                         trips {
2098                                 cpu_unk1_alert0: trip-point0 {
2099                                         temperature = <90000>;
2100                                         hysteresis = <2000>;
2101                                         type = "passive";
2102                                 };
2103
2104                                 cpu_unk1_alert1: trip-point1 {
2105                                         temperature = <95000>;
2106                                         hysteresis = <2000>;
2107                                         type = "passive";
2108                                 };
2109
2110                                 cpu_unk1_crit: cpu-crit {
2111                                         temperature = <110000>;
2112                                         hysteresis = <1000>;
2113                                         type = "critical";
2114                                 };
2115                         };
2116                 };
2117
2118                 gpuss0-thermal {
2119                         polling-delay-passive = <0>;
2120                         polling-delay = <0>;
2121
2122                         thermal-sensors = <&tsens0 13>;
2123
2124                         trips {
2125                                 gpuss0_alert0: trip-point0 {
2126                                         temperature = <90000>;
2127                                         hysteresis = <2000>;
2128                                         type = "passive";
2129                                 };
2130
2131                                 gpuss0_alert1: trip-point1 {
2132                                         temperature = <95000>;
2133                                         hysteresis = <2000>;
2134                                         type = "passive";
2135                                 };
2136
2137                                 gpuss0_crit: gpu-crit {
2138                                         temperature = <110000>;
2139                                         hysteresis = <1000>;
2140                                         type = "critical";
2141                                 };
2142                         };
2143                 };
2144
2145                 gpuss1-thermal {
2146                         polling-delay-passive = <0>;
2147                         polling-delay = <0>;
2148
2149                         thermal-sensors = <&tsens0 14>;
2150
2151                         trips {
2152                                 gpuss1_alert0: trip-point0 {
2153                                         temperature = <90000>;
2154                                         hysteresis = <2000>;
2155                                         type = "passive";
2156                                 };
2157
2158                                 gpuss1_alert1: trip-point1 {
2159                                         temperature = <95000>;
2160                                         hysteresis = <2000>;
2161                                         type = "passive";
2162                                 };
2163
2164                                 gpuss1_crit: gpu-crit {
2165                                         temperature = <110000>;
2166                                         hysteresis = <1000>;
2167                                         type = "critical";
2168                                 };
2169                         };
2170                 };
2171
2172                 mapss1-thermal {
2173                         polling-delay-passive = <0>;
2174                         polling-delay = <0>;
2175
2176                         thermal-sensors = <&tsens1 0>;
2177
2178                         trips {
2179                                 mapss1_alert0: trip-point0 {
2180                                         temperature = <90000>;
2181                                         hysteresis = <2000>;
2182                                         type = "passive";
2183                                 };
2184
2185                                 mapss1_alert1: trip-point1 {
2186                                         temperature = <95000>;
2187                                         hysteresis = <2000>;
2188                                         type = "passive";
2189                                 };
2190
2191                                 mapss1_crit: mapss-crit {
2192                                         temperature = <110000>;
2193                                         hysteresis = <1000>;
2194                                         type = "critical";
2195                                 };
2196                         };
2197                 };
2198
2199                 cwlan-thermal {
2200                         polling-delay-passive = <0>;
2201                         polling-delay = <0>;
2202
2203                         thermal-sensors = <&tsens1 1>;
2204
2205                         trips {
2206                                 cwlan_alert0: trip-point0 {
2207                                         temperature = <90000>;
2208                                         hysteresis = <2000>;
2209                                         type = "passive";
2210                                 };
2211
2212                                 cwlan_alert1: trip-point1 {
2213                                         temperature = <95000>;
2214                                         hysteresis = <2000>;
2215                                         type = "passive";
2216                                 };
2217
2218                                 cwlan_crit: cwlan-crit {
2219                                         temperature = <110000>;
2220                                         hysteresis = <1000>;
2221                                         type = "critical";
2222                                 };
2223                         };
2224                 };
2225
2226                 audio-thermal {
2227                         polling-delay-passive = <0>;
2228                         polling-delay = <0>;
2229
2230                         thermal-sensors = <&tsens1 2>;
2231
2232                         trips {
2233                                 audio_alert0: trip-point0 {
2234                                         temperature = <90000>;
2235                                         hysteresis = <2000>;
2236                                         type = "passive";
2237                                 };
2238
2239                                 audio_alert1: trip-point1 {
2240                                         temperature = <95000>;
2241                                         hysteresis = <2000>;
2242                                         type = "passive";
2243                                 };
2244
2245                                 audio_crit: audio-crit {
2246                                         temperature = <110000>;
2247                                         hysteresis = <1000>;
2248                                         type = "critical";
2249                                 };
2250                         };
2251                 };
2252
2253                 ddr-thermal {
2254                         polling-delay-passive = <0>;
2255                         polling-delay = <0>;
2256
2257                         thermal-sensors = <&tsens1 3>;
2258
2259                         trips {
2260                                 ddr_alert0: trip-point0 {
2261                                         temperature = <90000>;
2262                                         hysteresis = <2000>;
2263                                         type = "passive";
2264                                 };
2265
2266                                 ddr_alert1: trip-point1 {
2267                                         temperature = <95000>;
2268                                         hysteresis = <2000>;
2269                                         type = "passive";
2270                                 };
2271
2272                                 ddr_crit: ddr-crit {
2273                                         temperature = <110000>;
2274                                         hysteresis = <1000>;
2275                                         type = "critical";
2276                                 };
2277                         };
2278                 };
2279
2280                 q6hvx-thermal {
2281                         polling-delay-passive = <0>;
2282                         polling-delay = <0>;
2283
2284                         thermal-sensors = <&tsens1 4>;
2285
2286                         trips {
2287                                 q6hvx_alert0: trip-point0 {
2288                                         temperature = <90000>;
2289                                         hysteresis = <2000>;
2290                                         type = "passive";
2291                                 };
2292
2293                                 q6hvx_alert1: trip-point1 {
2294                                         temperature = <95000>;
2295                                         hysteresis = <2000>;
2296                                         type = "passive";
2297                                 };
2298
2299                                 q6hvx_crit: q6hvx-crit {
2300                                         temperature = <110000>;
2301                                         hysteresis = <1000>;
2302                                         type = "critical";
2303                                 };
2304                         };
2305                 };
2306
2307                 camera-thermal {
2308                         polling-delay-passive = <0>;
2309                         polling-delay = <0>;
2310
2311                         thermal-sensors = <&tsens1 5>;
2312
2313                         trips {
2314                                 camera_alert0: trip-point0 {
2315                                         temperature = <90000>;
2316                                         hysteresis = <2000>;
2317                                         type = "passive";
2318                                 };
2319
2320                                 camera_alert1: trip-point1 {
2321                                         temperature = <95000>;
2322                                         hysteresis = <2000>;
2323                                         type = "passive";
2324                                 };
2325
2326                                 camera_crit: camera-crit {
2327                                         temperature = <110000>;
2328                                         hysteresis = <1000>;
2329                                         type = "critical";
2330                                 };
2331                         };
2332                 };
2333
2334                 mdm-core0-thermal {
2335                         polling-delay-passive = <0>;
2336                         polling-delay = <0>;
2337
2338                         thermal-sensors = <&tsens1 6>;
2339
2340                         trips {
2341                                 mdm_core0_alert0: trip-point0 {
2342                                         temperature = <90000>;
2343                                         hysteresis = <2000>;
2344                                         type = "passive";
2345                                 };
2346
2347                                 mdm_core0_alert1: trip-point1 {
2348                                         temperature = <95000>;
2349                                         hysteresis = <2000>;
2350                                         type = "passive";
2351                                 };
2352
2353                                 mdm_core0_crit: mdm-core0-crit {
2354                                         temperature = <110000>;
2355                                         hysteresis = <1000>;
2356                                         type = "critical";
2357                                 };
2358                         };
2359                 };
2360
2361                 mdm-core1-thermal {
2362                         polling-delay-passive = <0>;
2363                         polling-delay = <0>;
2364
2365                         thermal-sensors = <&tsens1 7>;
2366
2367                         trips {
2368                                 mdm_core1_alert0: trip-point0 {
2369                                         temperature = <90000>;
2370                                         hysteresis = <2000>;
2371                                         type = "passive";
2372                                 };
2373
2374                                 mdm_core1_alert1: trip-point1 {
2375                                         temperature = <95000>;
2376                                         hysteresis = <2000>;
2377                                         type = "passive";
2378                                 };
2379
2380                                 mdm_core1_crit: mdm-core1-crit {
2381                                         temperature = <110000>;
2382                                         hysteresis = <1000>;
2383                                         type = "critical";
2384                                 };
2385                         };
2386                 };
2387
2388                 mdm-vec-thermal {
2389                         polling-delay-passive = <0>;
2390                         polling-delay = <0>;
2391
2392                         thermal-sensors = <&tsens1 8>;
2393
2394                         trips {
2395                                 mdm_vec_alert0: trip-point0 {
2396                                         temperature = <90000>;
2397                                         hysteresis = <2000>;
2398                                         type = "passive";
2399                                 };
2400
2401                                 mdm_vec_alert1: trip-point1 {
2402                                         temperature = <95000>;
2403                                         hysteresis = <2000>;
2404                                         type = "passive";
2405                                 };
2406
2407                                 mdm_vec_crit: mdm-vec-crit {
2408                                         temperature = <110000>;
2409                                         hysteresis = <1000>;
2410                                         type = "critical";
2411                                 };
2412                         };
2413                 };
2414
2415                 msm-scl-thermal {
2416                         polling-delay-passive = <0>;
2417                         polling-delay = <0>;
2418
2419                         thermal-sensors = <&tsens1 9>;
2420
2421                         trips {
2422                                 msm_scl_alert0: trip-point0 {
2423                                         temperature = <90000>;
2424                                         hysteresis = <2000>;
2425                                         type = "passive";
2426                                 };
2427
2428                                 msm_scl_alert1: trip-point1 {
2429                                         temperature = <95000>;
2430                                         hysteresis = <2000>;
2431                                         type = "passive";
2432                                 };
2433
2434                                 msm_scl_crit: msm-scl-crit {
2435                                         temperature = <110000>;
2436                                         hysteresis = <1000>;
2437                                         type = "critical";
2438                                 };
2439                         };
2440                 };
2441
2442                 video-thermal {
2443                         polling-delay-passive = <0>;
2444                         polling-delay = <0>;
2445
2446                         thermal-sensors = <&tsens1 10>;
2447
2448                         trips {
2449                                 video_alert0: trip-point0 {
2450                                         temperature = <90000>;
2451                                         hysteresis = <2000>;
2452                                         type = "passive";
2453                                 };
2454
2455                                 video_alert1: trip-point1 {
2456                                         temperature = <95000>;
2457                                         hysteresis = <2000>;
2458                                         type = "passive";
2459                                 };
2460
2461                                 video_crit: video-crit {
2462                                         temperature = <110000>;
2463                                         hysteresis = <1000>;
2464                                         type = "critical";
2465                                 };
2466                         };
2467                 };
2468         };
2469
2470         timer {
2471                 compatible = "arm,armv8-timer";
2472                 interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
2473                              <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
2474                              <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
2475                              <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
2476         };
2477 };