arch/arm64/boot/dts/qcom/sm6375-sony-xperia-murray-pdx225.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 /* PMK8350 is configured to use SID6 instead of 0 */
   9 #define PMK8350_SID 6
  10
  11 #include <dt-bindings/gpio/gpio.h>
  12 #include "sm6375.dtsi"
  13 #include "pm6125.dtsi"
  14 #include "pmk8350.dtsi"
  15 #include "pmr735a.dtsi"
  16
  17 /* PM6125 PON is used and we can't have duplicate labels */
  18 /delete-node/ &pmk8350_pon;
  19
  20 / {
  21         model = "Sony Xperia 10 IV";
  22         compatible = "sony,pdx225", "qcom,sm6375";
  23         chassis-type = "handset";
  24
  25         chosen {
  26                 #address-cells = <2>;
  27                 #size-cells = <2>;
  28                 ranges;
  29
  30                 framebuffer: framebuffer@85200000 {
  31                         compatible = "simple-framebuffer";
  32                         reg = <0 0x85200000 0 0xc00000>;
  33
  34                         width = <1080>;
  35                         height = <2520>;
  36                         stride = <(1080 * 4)>;
  37                         format = "a8r8g8b8";
  38                         /*
  39                          * That's (going to be) a lot of clocks, but it's necessary due
  40                          * to unused clk cleanup & no panel driver yet
  41                          */
  42                         clocks = <&gcc GCC_DISP_AHB_CLK>,
  43                                  <&gcc GCC_DISP_HF_AXI_CLK>,
  44                                  <&gcc GCC_DISP_THROTTLE_CORE_CLK>,
  45                                  <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>;
  46                 };
  47         };
  48
  49         gpio-keys {
  50                 compatible = "gpio-keys";
  51                 label = "gpio-keys";
  52
  53                 pinctrl-0 = <&vol_down_n>;
  54                 pinctrl-names = "default";
  55
  56                 key-volume-down {
  57                         label = "Volume Down";
  58                         linux,code = <KEY_VOLUMEDOWN>;
  59                         gpios = <&pmr735a_gpios 1 GPIO_ACTIVE_LOW>;
  60                         debounce-interval = <15>;
  61                         linux,can-disable;
  62                         wakeup-source;
  63                 };
  64         };
  65
  66         reserved-memory {
  67                 cont_splash_mem: memory@85200000 {
  68                         reg = <0 0x85200000 0 0xc00000>;
  69                         no-map;
  70                 };
  71
  72                 ramoops@ffc40000 {
  73                         compatible = "ramoops";
  74                         reg = <0 0xffc40000 0 0xb0000>;
  75                         record-size = <0x10000>;
  76                         console-size = <0x60000>;
  77                         ftrace-size = <0x10000>;
  78                         pmsg-size = <0x20000>;
  79                         ecc-size = <16>;
  80                 };
  81         };
  82
  83         vph_pwr: vph-pwr-regulator {
  84                 compatible = "regulator-fixed";
  85                 regulator-name = "vph_pwr";
  86                 regulator-min-microvolt = <3700000>;
  87                 regulator-max-microvolt = <3700000>;
  88                 regulator-always-on;
  89                 regulator-boot-on;
  90         };
  91 };
  92
  93 &sdc2_off_state {
  94         sd-cd-pins {
  95                 pins = "gpio94";
  96                 function = "gpio";
  97                 drive-strength = <2>;
  98                 bias-disable;
  99         };
 100 };
 101
 102 &sdc2_on_state {
 103         sd-cd-pins {
 104                 pins = "gpio94";
 105                 function = "gpio";
 106                 drive-strength = <2>;
 107                 bias-pull-up;
 108         };
 109 };
 110
 111 &sdhc_2 {
 112         status = "okay";
 113
 114         vmmc-supply = <&pm6125_l22>;
 115         vqmmc-supply = <&pm6125_l5>;
 116
 117         cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
 118 };
 119
 120 &gpi_dma0 {
 121         status = "okay";
 122 };
 123
 124 &gpi_dma1 {
 125         status = "okay";
 126 };
 127
 128 &i2c8 {
 129         clock-frequency = <400000>;
 130         status = "okay";
 131
 132         touchscreen@48 {
 133                 compatible = "samsung,s6sy761";
 134                 reg = <0x48>;
 135                 interrupt-parent = <&tlmm>;
 136                 interrupts = <22 0x2008>;
 137
 138                 vdd-supply = <&pm6125_l13>;
 139
 140                 pinctrl-names = "default";
 141                 pinctrl-0 = <&ts_int_default &ts_avdd_default>;
 142         };
 143 };
 144
 145 &pmk8350_adc_tm {
 146         status = "okay";
 147 };
 148
 149 &pmk8350_rtc {
 150         status = "okay";
 151 };
 152
 153 &pmr735a_gpios {
 154         vol_down_n: vol-down-n-state {
 155                 pins = "gpio1";
 156                 function = "normal";
 157                 power-source = <1>;
 158                 bias-pull-up;
 159                 input-enable;
 160         };
 161 };
 162
 163 &pon_pwrkey {
 164         status = "okay";
 165 };
 166
 167 &pon_resin {
 168         linux,code = <KEY_VOLUMEUP>;
 169         status = "okay";
 170 };
 171
 172 &qupv3_id_0 {
 173         status = "okay";
 174 };
 175
 176 &qupv3_id_1 {
 177         status = "okay";
 178 };
 179
 180 &remoteproc_adsp {
 181         firmware-name = "/*(DEBLOBBED)*/";
 182         status = "okay";
 183 };
 184
 185 &remoteproc_cdsp {
 186         firmware-name = "/*(DEBLOBBED)*/";
 187         status = "okay";
 188 };
 189
 190 &rpm_requests {
 191         regulators-0 {
 192                 compatible = "qcom,rpm-pm6125-regulators";
 193
 194                 pm6125_s5: s5 {
 195                         regulator-min-microvolt = <382000>;
 196                         regulator-max-microvolt = <1120000>;
 197                 };
 198
 199                 pm6125_s6: s6 {
 200                         regulator-min-microvolt = <320000>;
 201                         regulator-max-microvolt = <1374000>;
 202                 };
 203
 204                 pm6125_s7: s7 {
 205                         regulator-min-microvolt = <1574000>;
 206                         regulator-max-microvolt = <2040000>;
 207                 };
 208
 209                 /*
 210                  * S8 is VDD_GFX
 211                  * L1 is VDD_LPI_CX
 212                  */
 213
 214                 pm6125_l2: l2 {
 215                         regulator-min-microvolt = <1170000>;
 216                         regulator-max-microvolt = <1304000>;
 217                 };
 218
 219                 pm6125_l3: l3 {
 220                         regulator-min-microvolt = <1100000>;
 221                         regulator-max-microvolt = <1300000>;
 222                 };
 223
 224                 pm6125_l4: l4 {
 225                         regulator-min-microvolt = <1100000>;
 226                         regulator-max-microvolt = <1300000>;
 227                 };
 228
 229                 pm6125_l5: l5 {
 230                         regulator-min-microvolt = <1650000>;
 231                         regulator-max-microvolt = <2960000>;
 232                         regulator-allow-set-load;
 233                 };
 234
 235                 pm6125_l6: l6 {
 236                         regulator-min-microvolt = <1080000>;
 237                         regulator-max-microvolt = <1304000>;
 238                 };
 239
 240                 pm6125_l7: l7 {
 241                         regulator-min-microvolt = <720000>;
 242                         regulator-max-microvolt = <1050000>;
 243                 };
 244
 245                 pm6125_l8: l8 {
 246                         regulator-min-microvolt = <1100000>;
 247                         regulator-max-microvolt = <1304000>;
 248                 };
 249
 250                 pm6125_l9: l9 {
 251                         regulator-min-microvolt = <1504000>;
 252                         regulator-max-microvolt = <2000000>;
 253                 };
 254
 255                 pm6125_l10: l10 {
 256                         regulator-min-microvolt = <1620000>;
 257                         regulator-max-microvolt = <1980000>;
 258                 };
 259
 260                 pm6125_l11: l11 {
 261                         regulator-min-microvolt = <1620000>;
 262                         regulator-max-microvolt = <1980000>;
 263                 };
 264
 265                 pm6125_l12: l12 {
 266                         regulator-min-microvolt = <1620000>;
 267                         regulator-max-microvolt = <2000000>;
 268                 };
 269
 270                 pm6125_l13: l13 {
 271                         regulator-min-microvolt = <1650000>;
 272                         regulator-max-microvolt = <1980000>;
 273                 };
 274
 275                 pm6125_l14: l14 {
 276                         regulator-min-microvolt = <1700000>;
 277                         regulator-max-microvolt = <1900000>;
 278                 };
 279
 280                 pm6125_l15: l15 {
 281                         regulator-min-microvolt = <1650000>;
 282                         regulator-max-microvolt = <3544000>;
 283                 };
 284
 285                 pm6125_l16: l16 {
 286                         regulator-min-microvolt = <1620000>;
 287                         regulator-max-microvolt = <1980000>;
 288                 };
 289
 290                 /* L17 is VDD_LPI_MX */
 291
 292                 pm6125_l18: l18 {
 293                         regulator-min-microvolt = <830000>;
 294                         regulator-max-microvolt = <920000>;
 295                 };
 296
 297                 pm6125_l19: l19 {
 298                         regulator-min-microvolt = <1624000>;
 299                         regulator-max-microvolt = <3304000>;
 300                 };
 301
 302                 pm6125_l20: l20 {
 303                         regulator-min-microvolt = <1624000>;
 304                         regulator-max-microvolt = <3304000>;
 305                 };
 306
 307                 pm6125_l21: l21 {
 308                         regulator-min-microvolt = <3000000>;
 309                         regulator-max-microvolt = <3400000>;
 310                 };
 311
 312                 pm6125_l22: l22 {
 313                         regulator-min-microvolt = <2704000>;
 314                         regulator-max-microvolt = <2960000>;
 315                         regulator-allow-set-load;
 316                 };
 317
 318                 pm6125_l23: l23 {
 319                         regulator-min-microvolt = <3000000>;
 320                         regulator-max-microvolt = <3400000>;
 321                 };
 322
 323                 pm6125_l24: l24 {
 324                         regulator-min-microvolt = <2704000>;
 325                         regulator-max-microvolt = <3544000>;
 326                 };
 327         };
 328
 329         regulators-1 {
 330                 compatible = "qcom,rpm-pmr735a-regulators";
 331
 332                 /*
 333                  * S1 is VDD_MX
 334                  * S2 is VDD_CX
 335                  */
 336
 337                 pmr735a_l1: l1 {
 338                         regulator-min-microvolt = <570000>;
 339                         regulator-max-microvolt = <650000>;
 340                 };
 341
 342                 pmr735a_l2: l2 {
 343                         regulator-min-microvolt = <352000>;
 344                         regulator-max-microvolt = <796000>;
 345                 };
 346
 347                 pmr735a_l3: l3 {
 348                         regulator-min-microvolt = <1000000>;
 349                         regulator-max-microvolt = <1200000>;
 350                 };
 351
 352                 pmr735a_l4: l4 {
 353                         regulator-min-microvolt = <1504000>;
 354                         regulator-max-microvolt = <2000000>;
 355                 };
 356
 357                 pmr735a_l5: l5 {
 358                         regulator-min-microvolt = <751000>;
 359                         regulator-max-microvolt = <824000>;
 360                 };
 361
 362                 pmr735a_l6: l6 {
 363                         regulator-min-microvolt = <504000>;
 364                         regulator-max-microvolt = <868000>;
 365                 };
 366
 367                 pmr735a_l7: l7 {
 368                         regulator-min-microvolt = <2700000>;
 369                         regulator-max-microvolt = <3544000>;
 370                 };
 371         };
 372 };
 373
 374 &sdc2_off_state {
 375         sd-cd-pins {
 376                 pins = "gpio94";
 377                 function = "gpio";
 378                 drive-strength = <2>;
 379                 bias-disable;
 380         };
 381 };
 382
 383 &sdc2_on_state {
 384         sd-cd-pins {
 385                 pins = "gpio94";
 386                 function = "gpio";
 387                 drive-strength = <2>;
 388                 bias-pull-up;
 389         };
 390 };
 391
 392 &sdhc_2 {
 393         status = "okay";
 394
 395         vmmc-supply = <&pm6125_l22>;
 396         vqmmc-supply = <&pm6125_l5>;
 397
 398         cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
 399 };
 400
 401 &tlmm {
 402         gpio-reserved-ranges = <13 4>;
 403
 404         ts_int_default: ts-int-default-state {
 405                 pins = "gpio22";
 406                 function = "gpio";
 407                 drive-strength = <8>;
 408                 bias-pull-up;
 409         };
 410
 411         ts_avdd_default: ts-avdd-default-state {
 412                 pins = "gpio59";
 413                 function = "gpio";
 414                 drive-strength = <8>;
 415                 output-high;
 416         };
 417 };
 418
 419 &usb_1 {
 420         status = "okay";
 421 };
 422
 423 &usb_1_dwc3 {
 424         dr_mode = "peripheral";
 425 };
 426
 427 &usb_1_hsphy {
 428         status = "okay";
 429 };
 430
 431 &xo_board_clk {
 432         clock-frequency = <19200000>;
 433 };