arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * Copyright (c) 2023, Dang Huynh <danct12@riseup.net>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sm6115.dtsi"
   9 #include "pm6125.dtsi"
  10 #include <dt-bindings/arm/qcom,ids.h>
  11
  12 / {
  13         model = "F(x)tec Pro1X (QX1050)";
  14         compatible = "fxtec,pro1x", "qcom,sm6115";
  15         chassis-type = "handset";
  16
  17         qcom,msm-id = <QCOM_ID_SM6115 0x10000>;
  18
  19         chosen {
  20                 #address-cells = <2>;
  21                 #size-cells = <2>;
  22                 ranges;
  23
  24                 framebuffer0: framebuffer@5c000000 {
  25                         compatible = "simple-framebuffer";
  26                         reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>;
  27                         width = <1080>;
  28                         height = <2160>;
  29                         stride = <(1080 * 4)>;
  30                         format = "a8r8g8b8";
  31                         clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
  32                 };
  33         };
  34
  35         gpio-keys {
  36                 compatible = "gpio-keys";
  37
  38                 pinctrl-0 = <&vol_up_n>;
  39                 pinctrl-names = "default";
  40
  41                 key-volume-up {
  42                         label = "Volume Up";
  43                         linux,code = <KEY_VOLUMEUP>;
  44                         gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;
  45                         debounce-interval = <15>;
  46                         linux,can-disable;
  47                         wakeup-source;
  48                 };
  49         };
  50 };
  51
  52 &dispcc {
  53         /* HACK: disable until a panel driver is ready to retain simplefb */
  54         status = "disabled";
  55 };
  56
  57 &pm6125_gpios {
  58         vol_up_n: vol-up-n-state {
  59                 pins = "gpio5";
  60                 function = "normal";
  61                 power-source = <0>;
  62                 bias-pull-up;
  63                 input-enable;
  64         };
  65 };
  66
  67 &pon_pwrkey {
  68         status = "okay";
  69 };
  70
  71 &pon_resin {
  72         linux,code = <KEY_VOLUMEDOWN>;
  73         status = "okay";
  74 };
  75
  76 &rpm_requests {
  77         regulators-0 {
  78                 compatible = "qcom,rpm-pm6125-regulators";
  79
  80                 pm6125_s6a: s6 {
  81                         regulator-min-microvolt = <304000>;
  82                         regulator-max-microvolt = <1456000>;
  83                 };
  84
  85                 pm6125_s7a: s7 {
  86                         regulator-min-microvolt = <1280000>;
  87                         regulator-max-microvolt = <2040000>;
  88                 };
  89
  90                 pm6125_s8a: s8 {
  91                         regulator-min-microvolt = <1064000>;
  92                         regulator-max-microvolt = <1304000>;
  93                 };
  94
  95                 pm6125_l1a: l1 {
  96                         regulator-min-microvolt = <952000>;
  97                         regulator-max-microvolt = <1152000>;
  98                 };
  99
 100                 pm6125_l4a: l4 {
 101                         regulator-min-microvolt = <488000>;
 102                         regulator-max-microvolt = <1000000>;
 103                 };
 104
 105                 pm6125_l5a: l5 {
 106                         regulator-min-microvolt = <1648000>;
 107                         regulator-max-microvolt = <3056000>;
 108                 };
 109
 110                 pm6125_l6a: l6 {
 111                         regulator-min-microvolt = <576000>;
 112                         regulator-max-microvolt = <656000>;
 113                 };
 114
 115                 pm6125_l7a: l7 {
 116                         regulator-min-microvolt = <1200000>;
 117                         regulator-max-microvolt = <1304000>;
 118                 };
 119
 120                 pm6125_l8a: l8 {
 121                         regulator-min-microvolt = <400000>;
 122                         regulator-max-microvolt = <728000>;
 123                 };
 124
 125                 pm6125_l9a: l9 {
 126                         regulator-min-microvolt = <1800000>;
 127                         regulator-max-microvolt = <2000000>;
 128                 };
 129
 130                 pm6125_l10a: l10 {
 131                         regulator-min-microvolt = <1704000>;
 132                         regulator-max-microvolt = <1904000>;
 133                 };
 134
 135                 pm6125_l11a: l11 {
 136                         regulator-min-microvolt = <1704000>;
 137                         regulator-max-microvolt = <1952000>;
 138                         regulator-allow-set-load;
 139                 };
 140
 141                 pm6125_l12a: l12 {
 142                         regulator-min-microvolt = <1624000>;
 143                         regulator-max-microvolt = <1984000>;
 144                 };
 145
 146                 pm6125_l13a: l13 {
 147                         regulator-min-microvolt = <1504000>;
 148                         regulator-max-microvolt = <1952000>;
 149                 };
 150
 151                 pm6125_l14a: l14 {
 152                         regulator-min-microvolt = <1704000>;
 153                         regulator-max-microvolt = <1904000>;
 154                 };
 155
 156                 pm6125_l15a: l15 {
 157                         regulator-min-microvolt = <2920000>;
 158                         regulator-max-microvolt = <3232000>;
 159                 };
 160
 161                 pm6125_l16a: l16 {
 162                         regulator-min-microvolt = <1704000>;
 163                         regulator-max-microvolt = <1904000>;
 164                 };
 165
 166                 pm6125_l17a: l17 {
 167                         regulator-min-microvolt = <1152000>;
 168                         regulator-max-microvolt = <1384000>;
 169                 };
 170
 171                 pm6125_l18a: l18 {
 172                         regulator-min-microvolt = <1104000>;
 173                         regulator-max-microvolt = <1312000>;
 174                 };
 175
 176                 pm6125_l19a: l19 {
 177                         regulator-min-microvolt = <1624000>;
 178                         regulator-max-microvolt = <3304000>;
 179                 };
 180
 181                 pm6125_l20a: l20 {
 182                         regulator-min-microvolt = <1624000>;
 183                         regulator-max-microvolt = <3304000>;
 184                 };
 185
 186                 pm6125_l21a: l21 {
 187                         regulator-min-microvolt = <2400000>;
 188                         regulator-max-microvolt = <3600000>;
 189                 };
 190
 191                 pm6125_l22a: l22 {
 192                         regulator-min-microvolt = <2952000>;
 193                         regulator-max-microvolt = <3304000>;
 194                 };
 195
 196                 pm6125_l23a: l23 {
 197                         regulator-min-microvolt = <3200000>;
 198                         regulator-max-microvolt = <3400000>;
 199                 };
 200
 201                 pm6125_l24a: l24 {
 202                         regulator-min-microvolt = <2704000>;
 203                         regulator-max-microvolt = <3600000>;
 204                         regulator-allow-set-load;
 205                 };
 206         };
 207 };
 208
 209 &sleep_clk {
 210         clock-frequency = <32764>;
 211 };
 212
 213 &tlmm {
 214         gpio-reserved-ranges = <0 4>, <14 4>;
 215 };
 216
 217 &ufs_mem_hc {
 218         vcc-supply = <&pm6125_l24a>;
 219         vcc-max-microamp = <600000>;
 220         vccq2-supply = <&pm6125_l11a>;
 221         vccq2-max-microamp = <600000>;
 222         vdd-hba-supply = <&pm6125_l18a>;
 223         status = "okay";
 224 };
 225
 226 &ufs_mem_phy {
 227         vdda-phy-supply = <&pm6125_l4a>;
 228         vdda-pll-supply = <&pm6125_l12a>;
 229         status = "okay";
 230 };
 231
 232 &usb {
 233         status = "okay";
 234 };
 235
 236 &usb_dwc3 {
 237         maximum-speed = "high-speed";
 238         dr_mode = "peripheral";
 239 };
 240
 241 &usb_hsphy {
 242         vdd-supply = <&pm6125_l4a>;
 243         vdda-pll-supply = <&pm6125_l12a>;
 244         vdda-phy-dpdm-supply = <&pm6125_l15a>;
 245         status = "okay";
 246 };
 247
 248 &xo_board {
 249         clock-frequency = <19200000>;
 250 };