arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2020, Xilin Wu <strongtz@yeah.net>
   4  * Copyright (c) 2022, Molly Sophia <mollysophia379@gmail.com>
   5  */
   6
   7 /dts-v1/;
   8
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
  11 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  12 #include <dt-bindings/input/linux-event-codes.h>
  13 #include <dt-bindings/sound/qcom,q6afe.h>
  14 #include <dt-bindings/sound/qcom,q6asm.h>
  15 #include "sdm845.dtsi"
  16 #include "sdm845-wcd9340.dtsi"
  17 #include "pm8998.dtsi"
  18 #include "pmi8998.dtsi"
  19 #include "pm8005.dtsi"
  20
  21 /*
  22  * Delete following upstream (sdm845.dtsi) reserved
  23  * memory mappings which are different in this device.
  24  */
  25 /delete-node/ &rmtfs_mem;
  26 /delete-node/ &adsp_mem;
  27 /delete-node/ &wlan_msa_mem;
  28 /delete-node/ &mpss_region;
  29 /delete-node/ &venus_mem;
  30 /delete-node/ &cdsp_mem;
  31 /delete-node/ &mba_region;
  32 /delete-node/ &slpi_mem;
  33 /delete-node/ &spss_mem;
  34
  35 / {
  36         model = "Xiaomi Mi MIX 2S";
  37         compatible = "xiaomi,polaris", "qcom,sdm845";
  38         chassis-type = "handset";
  39
  40         /* required for bootloader to select correct board */
  41         qcom,msm-id = <0x141 0x20001>;
  42         qcom,board-id = <0x2a 0x0>;
  43
  44         aliases {
  45                 serial0 = &uart9;
  46                 serial1 = &uart6;
  47         };
  48
  49         gpio-keys {
  50                 compatible = "gpio-keys";
  51                 autorepeat;
  52
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&volume_up_gpio>;
  55
  56                 key-vol-up {
  57                         label = "Volume Up";
  58                         linux,code = <KEY_VOLUMEUP>;
  59                         gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
  60                         debounce-interval = <15>;
  61                 };
  62         };
  63
  64         reserved-memory {
  65                 adsp_mem: memory@8c500000 {
  66                         reg = <0 0x8c500000 0 0x1e00000>;
  67                         no-map;
  68                 };
  69
  70                 wlan_msa_mem: memory@8e300000 {
  71                         reg = <0 0x8e300000 0 0x100000>;
  72                         no-map;
  73                 };
  74
  75                 mpss_region: memory@8e400000 {
  76                         reg = <0 0x8e400000 0 0x7800000>;
  77                         no-map;
  78                 };
  79
  80                 venus_mem: memory@95c00000 {
  81                         reg = <0 0x95c00000 0 0x500000>;
  82                         no-map;
  83                 };
  84
  85                 cdsp_mem: memory@96100000 {
  86                         reg = <0 0x96100000 0 0x800000>;
  87                         no-map;
  88                 };
  89
  90                 mba_region: memory@96900000 {
  91                         reg = <0 0x96900000 0 0x200000>;
  92                         no-map;
  93                 };
  94
  95                 slpi_mem: memory@96b00000 {
  96                         reg = <0 0x96b00000 0 0x1400000>;
  97                         no-map;
  98                 };
  99
 100                 spss_mem: memory@97f00000 {
 101                         reg = <0 0x97f00000 0 0x100000>;
 102                         no-map;
 103                 };
 104
 105                 rmtfs_mem: memory@f6301000 {
 106                         compatible = "qcom,rmtfs-mem";
 107                         reg = <0 0xf6301000 0 0x200000>;
 108                         no-map;
 109
 110                         qcom,client-id = <1>;
 111                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 112                 };
 113         };
 114
 115         battery: battery {
 116                 compatible = "simple-battery";
 117
 118                 charge-full-design-microamp-hours = <3400000>;
 119                 voltage-min-design-microvolt = <3400000>;
 120                 voltage-max-design-microvolt = <4400000>;
 121         };
 122
 123         vreg_tp_vddio: vreg-tp-vddio {
 124                 compatible = "regulator-fixed";
 125                 regulator-name = "vreg_tp_vddio";
 126
 127                 regulator-min-microvolt = <1800000>;
 128                 regulator-max-microvolt = <1800000>;
 129
 130                 gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
 131                 regulator-always-on;
 132                 regulator-boot-on;
 133                 enable-active-high;
 134         };
 135
 136         vreg_s4a_1p8: vreg-s4a-1p8 {
 137                 compatible = "regulator-fixed";
 138                 regulator-name = "vreg_s4a_1p8";
 139
 140                 regulator-min-microvolt = <1800000>;
 141                 regulator-max-microvolt = <1800000>;
 142                 regulator-always-on;
 143         };
 144 };
 145
 146 &apps_rsc {
 147         regulators-0 {
 148                 compatible = "qcom,pm8998-rpmh-regulators";
 149                 qcom,pmic-id = "a";
 150
 151                 vreg_s2a_1p1: smps2 {
 152                         regulator-min-microvolt = <1100000>;
 153                         regulator-max-microvolt = <1100000>;
 154                 };
 155
 156                 vreg_s3a_1p35: smps3 {
 157                         regulator-min-microvolt = <1352000>;
 158                         regulator-max-microvolt = <1352000>;
 159                 };
 160
 161                 vreg_s5a_2p04: smps5 {
 162                         regulator-min-microvolt = <1904000>;
 163                         regulator-max-microvolt = <2040000>;
 164                 };
 165
 166                 vreg_s7a_1p025: smps7 {
 167                         regulator-min-microvolt = <900000>;
 168                         regulator-max-microvolt = <1028000>;
 169                 };
 170
 171                 vdda_mipi_dsi0_pll:
 172                 vdda_ufs1_core:
 173                 vreg_l1a_0p875: ldo1 {
 174                         regulator-min-microvolt = <880000>;
 175                         regulator-max-microvolt = <880000>;
 176                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 177                 };
 178
 179                 vreg_l2a_1p2: ldo2 {
 180                         regulator-min-microvolt = <1200000>;
 181                         regulator-max-microvolt = <1200000>;
 182                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 183                         regulator-always-on;
 184                 };
 185
 186                 vreg_l3a_1p0: ldo3 {
 187                         regulator-min-microvolt = <1000000>;
 188                         regulator-max-microvolt = <1000000>;
 189                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 190                 };
 191
 192                 vreg_l5a_0p8: ldo5 {
 193                         regulator-min-microvolt = <800000>;
 194                         regulator-max-microvolt = <800000>;
 195                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 196                 };
 197
 198                 vreg_l6a_1p8: ldo6 {
 199                         regulator-min-microvolt = <1856000>;
 200                         regulator-max-microvolt = <1856000>;
 201                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 202                 };
 203
 204                 vreg_l7a_1p8: ldo7 {
 205                         regulator-min-microvolt = <1800000>;
 206                         regulator-max-microvolt = <1800000>;
 207                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 208                 };
 209
 210                 vreg_l8a_1p2: ldo8 {
 211                         regulator-min-microvolt = <1200000>;
 212                         regulator-max-microvolt = <1248000>;
 213                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 214                 };
 215
 216                 vreg_l9a_1p8: ldo9 {
 217                         regulator-min-microvolt = <1704000>;
 218                         regulator-max-microvolt = <2928000>;
 219                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 220                 };
 221
 222                 vreg_l10a_2p95: ldo10 {
 223                         regulator-min-microvolt = <1704000>;
 224                         regulator-max-microvolt = <2928000>;
 225                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 226                 };
 227
 228                 vreg_l11a_1p05: ldo11 {
 229                         regulator-min-microvolt = <1000000>;
 230                         regulator-max-microvolt = <1048000>;
 231                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 232                 };
 233
 234                 vreg_l12a_1p8: ldo12 {
 235                         regulator-min-microvolt = <1800000>;
 236                         regulator-max-microvolt = <1800000>;
 237                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 238                 };
 239
 240                 vreg_l13a_2p95: ldo13 {
 241                         regulator-min-microvolt = <1800000>;
 242                         regulator-max-microvolt = <2960000>;
 243                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 244                 };
 245
 246                 vreg_l14a_1p8: ldo14 {
 247                         regulator-min-microvolt = <1800000>;
 248                         regulator-max-microvolt = <1880000>;
 249                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 250                         regulator-always-on;
 251                 };
 252
 253                 vreg_l15a_1p8: ldo15 {
 254                         regulator-min-microvolt = <1800000>;
 255                         regulator-max-microvolt = <1800000>;
 256                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 257                 };
 258
 259                 vreg_l16a_2p7: ldo16 {
 260                         regulator-min-microvolt = <2704000>;
 261                         regulator-max-microvolt = <2704000>;
 262                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 263                 };
 264
 265                 vreg_l17a_1p3: ldo17 {
 266                         regulator-min-microvolt = <1304000>;
 267                         regulator-max-microvolt = <1304000>;
 268                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 269                         regulator-always-on;
 270                 };
 271
 272                 vreg_l18a_2p9: ldo18 {
 273                         regulator-min-microvolt = <2704000>;
 274                         regulator-max-microvolt = <2960000>;
 275                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 276                 };
 277
 278                 vreg_l19a_3p1: ldo19 {
 279                         regulator-min-microvolt = <2856000>;
 280                         regulator-max-microvolt = <3104000>;
 281                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 282                 };
 283
 284                 vreg_l20a_2p95: ldo20 {
 285                         regulator-min-microvolt = <2704000>;
 286                         regulator-max-microvolt = <2960000>;
 287                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 288                 };
 289
 290                 vreg_l21a_2p95: ldo21 {
 291                         regulator-min-microvolt = <2704000>;
 292                         regulator-max-microvolt = <2960000>;
 293                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 294                 };
 295
 296                 vreg_l22a_3p3: ldo22 {
 297                         regulator-min-microvolt = <2864000>;
 298                         regulator-max-microvolt = <3312000>;
 299                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 300                 };
 301
 302                 vreg_l23a_3p3: ldo23 {
 303                         regulator-min-microvolt = <3000000>;
 304                         regulator-max-microvolt = <3312000>;
 305                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 306                 };
 307
 308                 vreg_l24a_3p075: ldo24 {
 309                         regulator-min-microvolt = <3088000>;
 310                         regulator-max-microvolt = <3088000>;
 311                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 312                 };
 313
 314                 vreg_l25a_3p3: ldo25 {
 315                         regulator-min-microvolt = <3000000>;
 316                         regulator-max-microvolt = <3312000>;
 317                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 318                         regulator-always-on;
 319                 };
 320
 321                 vdda_mipi_dsi0_1p2:
 322                 vdda_ufs1_1p2:
 323                 vreg_l26a_1p2: ldo26 {
 324                         regulator-min-microvolt = <1200000>;
 325                         regulator-max-microvolt = <1200000>;
 326                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 327                 };
 328
 329                 vreg_l28a_3p0: ldo28 {
 330                         regulator-min-microvolt = <2856000>;
 331                         regulator-max-microvolt = <3008000>;
 332                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 333                         regulator-always-on;
 334                 };
 335
 336                 vreg_lvs1a_1p8: lvs1 {
 337                         regulator-min-microvolt = <1800000>;
 338                         regulator-max-microvolt = <1800000>;
 339                 };
 340
 341                 vreg_lvs2a_1p8: lvs2 {
 342                         regulator-min-microvolt = <1800000>;
 343                         regulator-max-microvolt = <1800000>;
 344                 };
 345         };
 346
 347         regulators-1 {
 348                 compatible = "qcom,pmi8998-rpmh-regulators";
 349                 qcom,pmic-id = "b";
 350
 351                 vreg_bob: bob {
 352                         regulator-min-microvolt = <3312000>;
 353                         regulator-max-microvolt = <3600000>;
 354                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 355                         regulator-allow-bypass;
 356                 };
 357         };
 358
 359         regulators-2 {
 360                 compatible = "qcom,pm8005-rpmh-regulators";
 361                 qcom,pmic-id = "c";
 362
 363                 vreg_smp3c_0p6: smps3 {
 364                         regulator-min-microvolt = <600000>;
 365                         regulator-max-microvolt = <600000>;
 366                         regulator-always-on;
 367                 };
 368         };
 369 };
 370
 371 &cdsp_pas {
 372         firmware-name = "/*(DEBLOBBED)*/";
 373         status = "okay";
 374 };
 375
 376 &gcc {
 377         protected-clocks = <GCC_QSPI_CORE_CLK>,
 378                                 <GCC_QSPI_CORE_CLK_SRC>,
 379                                 <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 380                                 <GCC_LPASS_Q6_AXI_CLK>,
 381                                 <GCC_LPASS_SWAY_CLK>;
 382 };
 383
 384 &gmu {
 385         status = "okay";
 386 };
 387
 388 &gpi_dma0 {
 389         status = "okay";
 390 };
 391
 392 &gpi_dma1 {
 393         status = "okay";
 394 };
 395
 396 &gpu {
 397         status = "okay";
 398
 399         zap-shader {
 400                 memory-region = <&gpu_mem>;
 401                 firmware-name = "/*(DEBLOBBED)*/";
 402         };
 403 };
 404
 405 &ibb {
 406         regulator-min-microvolt = <4600000>;
 407         regulator-max-microvolt = <6000000>;
 408         regulator-over-current-protection;
 409         regulator-pull-down;
 410         regulator-soft-start;
 411         qcom,discharge-resistor-kohms = <300>;
 412 };
 413
 414 &ipa {
 415         qcom,gsi-loader = "self";
 416         memory-region = <&ipa_fw_mem>;
 417         firmware-name = "/*(DEBLOBBED)*/";
 418         status = "okay";
 419 };
 420
 421 &i2c14 {
 422         clock-frequency = <400000>;
 423         status = "okay";
 424
 425         touchscreen@20 {
 426                 compatible = "syna,rmi4-i2c";
 427                 reg = <0x20>;
 428                 #address-cells = <1>;
 429                 #size-cells = <0>;
 430                 interrupts-extended = <&tlmm 125 0x2008>;
 431
 432                 pinctrl-names = "default", "sleep";
 433                 pinctrl-0 = <&ts_int_default &ts_reset_default>;
 434                 pinctrl-1 = <&ts_int_sleep &ts_reset_sleep>;
 435
 436                 vdd-supply = <&vreg_l28a_3p0>;
 437                 vio-supply = <&vreg_tp_vddio>;
 438
 439                 syna,startup-delay-ms = <0xc8>;
 440                 syna,reset-delay-ms = <0xc8>;
 441
 442                 rmi4-f01@1 {
 443                         syna,nosleep-mode = <0x1>;
 444                         reg = <0x1>;
 445                 };
 446
 447                 rmi4-f12@12 {
 448                         reg = <0x12>;
 449                         syna,rezero-wait-ms = <0xc8>;
 450                         syna,clip-x-high = <0x438>;
 451                         syna,clip-y-high = <0x870>;
 452                         syna,sensor-type = <0x1>;
 453                         syna,clip-x-low = <0x0>;
 454                         syna,clip-y-low = <0x0>;
 455                 };
 456         };
 457 };
 458
 459 &lab {
 460         regulator-min-microvolt = <4600000>;
 461         regulator-max-microvolt = <6000000>;
 462         regulator-soft-start;
 463         regulator-pull-down;
 464 };
 465
 466 &mdss {
 467         status = "okay";
 468 };
 469
 470 &mdss_dsi0 {
 471         vdda-supply = <&vdda_mipi_dsi0_1p2>;
 472         status = "okay";
 473
 474         display_panel: panel@0 {
 475                 compatible = "jdi,fhd-nt35596s";
 476                 #address-cells = <1>;
 477                 #size-cells = <0>;
 478                 reg = <0>;
 479
 480                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
 481                 vddio-supply = <&vreg_l14a_1p8>;
 482                 backlight = <&pmi8998_wled>;
 483                 vddpos-supply = <&lab>;
 484                 vddneg-supply = <&ibb>;
 485
 486                 pinctrl-names = "default", "sleep";
 487                 pinctrl-0 = <&sde_dsi_active>;
 488                 pinctrl-1 = <&sde_dsi_suspend>;
 489
 490                 port {
 491                         panel_in: endpoint {
 492                                 remote-endpoint = <&mdss_dsi0_out>;
 493                         };
 494                 };
 495         };
 496 };
 497
 498 &mdss_dsi0_out {
 499         remote-endpoint = <&panel_in>;
 500         data-lanes = <0 1 2 3>;
 501 };
 502
 503 &mdss_dsi0_phy {
 504         vdds-supply = <&vdda_mipi_dsi0_pll>;
 505         status = "okay";
 506 };
 507
 508 &mss_pil {
 509         firmware-name = "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/";
 510         status = "okay";
 511 };
 512
 513 &pmi8998_wled {
 514         qcom,current-limit-microamp = <20000>;
 515         qcom,current-boost-limit = <970>;
 516         qcom,ovp-millivolt = <19600>;
 517         qcom,switching-freq = <600>;
 518         qcom,num-strings = <4>;
 519         qcom,cabc;
 520
 521         status = "okay";
 522 };
 523
 524 &pm8998_gpios {
 525         volume_up_gpio: pm8998-gpio6-state {
 526                 pinconf {
 527                         qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 528                         function = "normal";
 529                         pins = "gpio6";
 530                         input-enable;
 531                         bias-pull-up;
 532                 };
 533         };
 534 };
 535
 536 &pm8998_resin {
 537         linux,code = <KEY_VOLUMEDOWN>;
 538         status = "okay";
 539 };
 540
 541 &q6afedai {
 542         dai@22 {
 543                 reg = <QUATERNARY_MI2S_RX>;
 544                 qcom,sd-lines = <0>;
 545         };
 546 };
 547
 548 &q6asmdai {
 549         dai@0 {
 550                 reg = <0>;
 551         };
 552
 553         dai@1 {
 554                 reg = <1>;
 555         };
 556
 557         dai@2 {
 558                 reg = <2>;
 559         };
 560 };
 561
 562 &qupv3_id_0 {
 563         status = "okay";
 564 };
 565
 566 &qupv3_id_1 {
 567         status = "okay";
 568 };
 569
 570 &qup_i2c14_default {
 571         drive-strength = <2>;
 572         bias-disable;
 573 };
 574
 575 &tlmm {
 576         gpio-reserved-ranges = <0 4>, <81 4>;
 577
 578         ts_reset_default: ts-reset-default-state {
 579                 pins = "gpio99";
 580                 function = "gpio";
 581                 drive-strength = <16>;
 582                 output-high;
 583         };
 584
 585         ts_int_default: ts-int-default-state {
 586                 pins = "gpio125";
 587                 function = "gpio";
 588                 bias-pull-down;
 589                 drive-strength = <16>;
 590         };
 591
 592         ts_reset_sleep: ts-reset-sleep-state {
 593                 pins = "gpio99";
 594                 function = "gpio";
 595                 bias-disable;
 596                 drive-strength = <2>;
 597         };
 598
 599         ts_int_sleep: ts-int-sleep-state {
 600                 pins = "gpio125";
 601                 function = "gpio";
 602                 bias-pull-down;
 603                 drive-strength = <2>;
 604         };
 605
 606         sde_dsi_active: sde-dsi-active-state {
 607                 pins = "gpio6", "gpio10";
 608                 function = "gpio";
 609                 drive-strength = <8>;
 610                 bias-disable;
 611         };
 612
 613         sde_dsi_suspend: sde-dsi-suspend-state {
 614                 pins = "gpio6", "gpio10";
 615                 function = "gpio";
 616                 drive-strength = <2>;
 617                 bias-pull-down;
 618         };
 619 };
 620
 621 &uart6 {
 622         status = "okay";
 623
 624         pinctrl-0 = <&qup_uart6_4pin>;
 625
 626         bluetooth {
 627                 compatible = "qcom,wcn3990-bt";
 628
 629                 /* This path is relative to the qca/ subdir under lib/firmware. */
 630                 firmware-name = "/*(DEBLOBBED)*/";
 631
 632                 vddio-supply = <&vreg_s4a_1p8>;
 633                 vddxo-supply = <&vreg_l7a_1p8>;
 634                 vddrf-supply = <&vreg_l17a_1p3>;
 635                 vddch0-supply = <&vreg_l25a_3p3>;
 636                 max-speed = <3200000>;
 637         };
 638 };
 639
 640 &usb_1 {
 641         /* We'll use this as USB 2.0 only */
 642         qcom,select-utmi-as-pipe-clk;
 643         status = "okay";
 644 };
 645
 646 &usb_1_dwc3 {
 647         dr_mode = "peripheral";
 648
 649         /* Fastest mode for USB 2 */
 650         maximum-speed = "high-speed";
 651
 652         /* Remove USB3 phy */
 653         phys = <&usb_1_hsphy>;
 654         phy-names = "usb2-phy";
 655 };
 656
 657 &usb_1_hsphy {
 658         vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 659         vdda-pll-supply = <&vreg_l12a_1p8>;
 660         vdd-supply = <&vreg_l1a_0p875>;
 661
 662         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 663         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 664         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 665         qcom,imp-res-offset-value = <8>;
 666
 667         status = "okay";
 668 };
 669
 670 &usb_1_qmpphy {
 671         vdda-pll-supply = <&vreg_l1a_0p875>;
 672         vdda-phy-supply = <&vreg_l26a_1p2>;
 673         status = "okay";
 674 };
 675
 676 &ufs_mem_hc {
 677         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 678         vcc-supply = <&vreg_l20a_2p95>;
 679         vcc-max-microamp = <800000>;
 680         status = "okay";
 681 };
 682
 683 &ufs_mem_phy {
 684         vdda-phy-supply = <&vdda_ufs1_core>;
 685         vdda-pll-supply = <&vdda_ufs1_1p2>;
 686         status = "okay";
 687 };
 688
 689 &venus {
 690         firmware-name = "/*(DEBLOBBED)*/";
 691         status = "okay";
 692 };
 693
 694 &wcd9340 {
 695         reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
 696         vdd-buck-sido-supply = <&vreg_s4a_1p8>;
 697         vdd-buck-supply = <&vreg_s4a_1p8>;
 698         vdd-tx-supply = <&vreg_s4a_1p8>;
 699         vdd-rx-supply = <&vreg_s4a_1p8>;
 700         vdd-io-supply = <&vreg_s4a_1p8>;
 701
 702         qcom,micbias1-microvolt = <2700000>;
 703         qcom,micbias2-microvolt = <1800000>;
 704         qcom,micbias3-microvolt = <2700000>;
 705         qcom,micbias4-microvolt = <2700000>;
 706 };
 707
 708 &wifi {
 709         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 710         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 711         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 712         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 713         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 714         status = "okay";
 715 };