arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   8 #include "sdm845.dtsi"
   9 #include "pm8005.dtsi"
  10 #include "pm8998.dtsi"
  11 #include "pmi8998.dtsi"
  12
  13 / {
  14         qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
  15         qcom,board-id = <8 0>;
  16
  17         aliases {
  18                 serial0 = &uart6;
  19                 serial1 = &uart9;
  20         };
  21
  22         chosen {
  23                 stdout-path = "serial0:115200n8";
  24         };
  25
  26         gpio-keys {
  27                 compatible = "gpio-keys";
  28
  29                 /* Neither Camera Focus, nor Camera Shutter seem to work... */
  30
  31                 key-vol-down {
  32                         label = "volume_down";
  33                         gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
  34                         linux,code = <KEY_VOLUMEDOWN>;
  35                         debounce-interval = <15>;
  36                         gpio-key,wakeup;
  37                 };
  38         };
  39
  40         vph_pwr: vph-pwr-regulator {
  41                 compatible = "regulator-fixed";
  42                 regulator-name = "vph_pwr";
  43                 regulator-min-microvolt = <3700000>;
  44                 regulator-max-microvolt = <3700000>;
  45         };
  46
  47         vreg_s4a_1p8: pm8998-smps4 {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "vreg_s4a_1p8";
  50
  51                 regulator-min-microvolt = <1800000>;
  52                 regulator-max-microvolt = <1800000>;
  53
  54                 regulator-always-on;
  55                 regulator-boot-on;
  56
  57                 vin-supply = <&vph_pwr>;
  58         };
  59
  60         reserved-memory {
  61                 /* SONY was cool and didn't diverge from MTP this time, yay! */
  62                 cont_splash_mem: memory@9d400000 {
  63                         reg = <0x0 0x9d400000 0x0 0x2400000>;
  64                         no-map;
  65                 };
  66
  67                 ramoops@ffc00000 {
  68                         compatible = "ramoops";
  69                         reg = <0x0 0xffc00000 0x0 0x100000>;
  70                         record-size = <0x10000>;
  71                         console-size = <0x60000>;
  72                         ftrace-size = <0x10000>;
  73                         pmsg-size = <0x20000>;
  74                         ecc-size = <16>;
  75                         no-map;
  76                 };
  77         };
  78 };
  79
  80 &apps_rsc {
  81         regulators-0 {
  82                 compatible = "qcom,pm8998-rpmh-regulators";
  83                 qcom,pmic-id = "a";
  84
  85                 vdd-s1-supply = <&vph_pwr>;
  86                 vdd-s2-supply = <&vph_pwr>;
  87                 vdd-s3-supply = <&vph_pwr>;
  88                 vdd-s4-supply = <&vph_pwr>;
  89                 vdd-s5-supply = <&vph_pwr>;
  90                 vdd-s6-supply = <&vph_pwr>;
  91                 vdd-s7-supply = <&vph_pwr>;
  92                 vdd-s8-supply = <&vph_pwr>;
  93                 vdd-s9-supply = <&vph_pwr>;
  94                 vdd-s10-supply = <&vph_pwr>;
  95                 vdd-s11-supply = <&vph_pwr>;
  96                 vdd-s12-supply = <&vph_pwr>;
  97                 vdd-s13-supply = <&vph_pwr>;
  98                 vdd-l1-l27-supply = <&vreg_s7a_0p9>;
  99                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
 100                 vdd-l3-l11-supply = <&vreg_s7a_0p9>;
 101                 vdd-l4-l5-supply = <&vreg_s7a_0p9>;
 102                 vdd-l6-supply = <&vph_pwr>;
 103                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
 104                 vdd-l9-supply = <&vreg_s5a_1p9>;
 105                 vdd-l10-l23-l25-supply = <&src_vreg_bob>;
 106                 vdd-l13-l19-l21-supply = <&src_vreg_bob>;
 107                 vdd-l16-l28-supply = <&src_vreg_bob>;
 108                 vdd-l18-l22-supply = <&src_vreg_bob>;
 109                 vdd-l20-l24-supply = <&src_vreg_bob>;
 110                 vdd-l26-supply = <&vreg_s3a_1p3>;
 111                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
 112
 113                 vreg_s2a_1p1: smps2 {
 114                         regulator-min-microvolt = <1100000>;
 115                         regulator-max-microvolt = <1100000>;
 116                 };
 117
 118                 vreg_s3a_1p3: smps3 {
 119                         regulator-min-microvolt = <1352000>;
 120                         regulator-max-microvolt = <1352000>;
 121                 };
 122
 123                 vreg_s5a_1p9: smps5 {
 124                         regulator-min-microvolt = <1904000>;
 125                         regulator-max-microvolt = <2040000>;
 126                 };
 127
 128                 vreg_s7a_0p9: smps7 {
 129                         regulator-min-microvolt = <900000>;
 130                         regulator-max-microvolt = <1028000>;
 131                 };
 132
 133                 vreg_l1a_0p9: ldo1 {
 134                         regulator-min-microvolt = <880000>;
 135                         regulator-max-microvolt = <880000>;
 136                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 137                 };
 138
 139                 vreg_l2a_1p2: ldo2 {
 140                         regulator-min-microvolt = <1200000>;
 141                         regulator-max-microvolt = <1200000>;
 142                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 143                         regulator-always-on;
 144                 };
 145
 146                 vreg_l3a_1p0: ldo3 {
 147                         regulator-min-microvolt = <1000000>;
 148                         regulator-max-microvolt = <1000000>;
 149                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 150                 };
 151
 152                 vreg_l5a_0p8: ldo5 {
 153                         regulator-min-microvolt = <800000>;
 154                         regulator-max-microvolt = <800000>;
 155                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 156                 };
 157
 158                 vreg_l6a_1p8: ldo6 {
 159                         regulator-min-microvolt = <1856000>;
 160                         regulator-max-microvolt = <1856000>;
 161                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 162                 };
 163
 164                 vreg_l7a_1p8: ldo7 {
 165                         regulator-min-microvolt = <1800000>;
 166                         regulator-max-microvolt = <1800000>;
 167                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 168                 };
 169
 170                 vreg_l8a_1p2: ldo8 {
 171                         regulator-min-microvolt = <1200000>;
 172                         regulator-max-microvolt = <1248000>;
 173                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 174                 };
 175
 176                 vreg_l9a_1p7: ldo9 {
 177                         regulator-min-microvolt = <1704000>;
 178                         regulator-max-microvolt = <2928000>;
 179                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 180                 };
 181
 182                 vreg_l10a_1p7: ldo10 {
 183                         regulator-min-microvolt = <1704000>;
 184                         regulator-max-microvolt = <2928000>;
 185                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 186                 };
 187
 188                 vreg_l11a_1p0: ldo11 {
 189                         regulator-min-microvolt = <1000000>;
 190                         regulator-max-microvolt = <1048000>;
 191                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 192                 };
 193
 194                 vreg_l12a_1p8: ldo12 {
 195                         regulator-min-microvolt = <1800000>;
 196                         regulator-max-microvolt = <1800000>;
 197                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 198                 };
 199
 200                 vreg_l13a_1p8: ldo13 {
 201                         regulator-min-microvolt = <1800000>;
 202                         regulator-max-microvolt = <2960000>;
 203                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 204                 };
 205
 206                 vreg_l14a_1p8: ldo14 {
 207                         regulator-min-microvolt = <1800000>;
 208                         regulator-max-microvolt = <1800000>;
 209                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 210                 };
 211
 212                 vreg_l15a_1p8: ldo15 {
 213                         regulator-min-microvolt = <1800000>;
 214                         regulator-max-microvolt = <1800000>;
 215                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 216                 };
 217
 218                 vreg_l16a_2p7: ldo16 {
 219                         regulator-min-microvolt = <2704000>;
 220                         regulator-max-microvolt = <2704000>;
 221                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 222                 };
 223
 224                 vreg_l17a_1p3: ldo17 {
 225                         regulator-min-microvolt = <1304000>;
 226                         regulator-max-microvolt = <1304000>;
 227                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 228                 };
 229
 230                 vreg_l18a_2p7: ldo18 {
 231                         regulator-min-microvolt = <2704000>;
 232                         regulator-max-microvolt = <2960000>;
 233                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 234                 };
 235
 236                 vreg_l19a_2p7: ldo19 {
 237                         regulator-min-microvolt = <2700000>;
 238                         regulator-max-microvolt = <2700000>;
 239                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 240
 241                         /*
 242                          * The driver *really* doesn't want this regualtor to exist,
 243                          * saying that it could not get the current voltage (-ENOTRECOVERABLE)
 244                          * even though it surely is used on these devices (as a voltage
 245                          * source for camera autofocus)
 246                          */
 247                         status = "disabled";
 248                 };
 249
 250                 vreg_l20a_2p7: ldo20 {
 251                         regulator-min-microvolt = <2704000>;
 252                         regulator-max-microvolt = <2960000>;
 253                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 254                 };
 255
 256                 vreg_l21a_2p7: ldo21 {
 257                         regulator-min-microvolt = <2704000>;
 258                         regulator-max-microvolt = <2960000>;
 259                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 260                 };
 261
 262                 vreg_l22a_2p8: ldo22 {
 263                         regulator-min-microvolt = <2800000>;
 264                         regulator-max-microvolt = <2800000>;
 265                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 266                 };
 267
 268                 vreg_l23a_3p0: ldo23 {
 269                         regulator-min-microvolt = <3000000>;
 270                         regulator-max-microvolt = <3312000>;
 271                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 272                 };
 273
 274                 vreg_l24a_3p1: ldo24 {
 275                         regulator-min-microvolt = <3088000>;
 276                         regulator-max-microvolt = <3088000>;
 277                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 278                 };
 279
 280                 vreg_l25a_3p0: ldo25 {
 281                         regulator-min-microvolt = <3000000>;
 282                         regulator-max-microvolt = <3312000>;
 283                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 284                 };
 285
 286                 vreg_l26a_1p2: ldo26 {
 287                         regulator-min-microvolt = <1200000>;
 288                         regulator-max-microvolt = <1200000>;
 289                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 290                 };
 291
 292                 vreg_l28a_2p8: ldo28 {
 293                         regulator-min-microvolt = <2856000>;
 294                         regulator-max-microvolt = <3008000>;
 295                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 296                 };
 297
 298                 vreg_lvs1a_1p8: lvs1 {
 299                         regulator-min-microvolt = <1800000>;
 300                         regulator-max-microvolt = <1800000>;
 301                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 302                 };
 303
 304                 vreg_lvs2a_1p8: lvs2 {
 305                         regulator-min-microvolt = <1800000>;
 306                         regulator-max-microvolt = <1800000>;
 307                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 308                 };
 309         };
 310
 311         regulators-1 {
 312                 compatible = "qcom,pmi8998-rpmh-regulators";
 313                 qcom,pmic-id = "b";
 314
 315                 src_vreg_bob: bob {
 316                         regulator-min-microvolt = <3312000>;
 317                         regulator-max-microvolt = <3600000>;
 318                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 319                 };
 320         };
 321
 322         regulators-2 {
 323                 compatible = "qcom,pm8005-rpmh-regulators";
 324                 qcom,pmic-id = "c";
 325
 326                 vdd-s1-supply = <&vph_pwr>;
 327                 vdd-s2-supply = <&vph_pwr>;
 328                 vdd-s3-supply = <&vph_pwr>;
 329                 vdd-s4-supply = <&vph_pwr>;
 330
 331                 vreg_s3c_0p6: smps3 {
 332                         regulator-min-microvolt = <600000>;
 333                         regulator-max-microvolt = <600000>;
 334                 };
 335         };
 336 };
 337
 338 &gcc {
 339         protected-clocks = <GCC_QSPI_CORE_CLK>,
 340                         <GCC_QSPI_CORE_CLK_SRC>,
 341                         <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 342                         <GCC_LPASS_Q6_AXI_CLK>,
 343                         <GCC_LPASS_SWAY_CLK>;
 344 };
 345
 346 &i2c5 {
 347         status = "okay";
 348         clock-frequency = <400000>;
 349
 350         /* Synaptics touchscreen @ 2c, 3c */
 351 };
 352
 353 &i2c10 {
 354         status = "okay";
 355         clock-frequency = <400000>;
 356
 357         /* Qcom SMB1355 @ 8, c */
 358         /* NXP PN547 NFC @ 28 */
 359         /* Renesas IDTP9221 Qi charger @ 61 */
 360 };
 361
 362 &i2c14 {
 363         status = "okay";
 364         clock-frequency = <400000>;
 365
 366         /* SONY ToF sensor @ 52 */
 367         /* AMS TCS3490 RGB+IR color sensor @ 72 */
 368 };
 369
 370 &qupv3_id_0 {
 371         status = "okay";
 372 };
 373
 374 &qupv3_id_1 {
 375         status = "okay";
 376 };
 377
 378 &sdhc_2 {
 379         status = "okay";
 380
 381         vmmc-supply = <&vreg_l21a_2p7>;
 382         vqmmc-supply = <&vreg_l13a_1p8>;
 383         cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
 384         pinctrl-0 = <&sdc2_default_state>;
 385         pinctrl-names = "default";
 386         bus-width = <4>;
 387         no-sdio;
 388         no-emmc;
 389 };
 390
 391 &tlmm {
 392         gpio-reserved-ranges = <0 4>, <81 4>;
 393
 394         sdc2_default_state: sdc2-default-state {
 395                 clk {
 396                         pins = "sdc2_clk";
 397                         drive-strength = <16>;
 398                         bias-disable;
 399                 };
 400
 401                 cmd {
 402                         pins = "sdc2_cmd";
 403                         drive-strength = <10>;
 404                         bias-pull-up;
 405                 };
 406
 407                 data {
 408                         pins = "sdc2_data";
 409                         drive-strength = <10>;
 410                         bias-pull-up;
 411                 };
 412         };
 413 };
 414
 415 &uart6 {
 416         status = "okay";
 417 };
 418
 419 &uart9 {
 420         status = "okay";
 421 };
 422
 423 /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
 424 &ufs_mem_hc { status = "disabled"; };
 425 &ufs_mem_phy { status = "disabled"; };
 426
 427 &usb_1 {
 428         status = "okay";
 429
 430         qcom,select-utmi-as-pipe-clk;
 431 };
 432
 433 &usb_1_dwc3 {
 434         dr_mode = "peripheral";
 435
 436         maximum-speed = "high-speed";
 437         phys = <&usb_1_hsphy>;
 438         phy-names = "usb2-phy";
 439 };
 440
 441 &usb_1_hsphy {
 442         status = "okay";
 443
 444         vdd-supply = <&vreg_l1a_0p9>;
 445         vdda-pll-supply = <&vreg_l12a_1p8>;
 446         vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
 447 };