arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama-akatsuki.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "sdm845-sony-xperia-tama.dtsi"
   9
  10 /* XZ3 uses an Atmel touchscreen instead. */
  11 /delete-node/ &touchscreen;
  12
  13 / {
  14         model = "Sony Xperia XZ3";
  15         compatible = "sony,akatsuki-row", "qcom,sdm845";
  16
  17         /* Fixed DCDC for the OLED panel */
  18         ts_vddio_supply: ts-vddio-regulator {
  19                 compatible = "regulator-fixed";
  20                 regulator-name = "ts_vddio";
  21
  22                 regulator-min-microvolt = <1840000>;
  23                 regulator-max-microvolt = <1840000>;
  24
  25                 gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>;
  26                 enable-active-high;
  27                 regulator-boot-on;
  28         };
  29 };
  30
  31 &ibb {
  32         status = "disabled";
  33 };
  34
  35 &lab {
  36         status = "disabled";
  37 };
  38
  39 &panel {
  40         /* Akatsuki uses an OLED panel. */
  41         /delete-property/ backlight;
  42         /delete-property/ vsp-supply;
  43         /delete-property/ vsn-supply;
  44         /delete-property/ touch-reset-gpios;
  45 };
  46
  47 &pmi8998_gpios {
  48         gpio-line-names = "NC", /* GPIO_1 */
  49                           "NC",
  50                           "NC",
  51                           "",
  52                           "NC",
  53                           "NC",
  54                           "",
  55                           "WLC_EN_N",
  56                           "NC",
  57                           "NC", /* GPIO_10 */
  58                           "NC",
  59                           "CAM_IO_EN",
  60                           "",
  61                           "NC";
  62 };
  63
  64 &pmi8998_wled {
  65         status = "disabled";
  66 };
  67
  68 &tlmm {
  69         gpio-line-names = "NC", /* GPIO_0 */
  70                           "NC",
  71                           "NC",
  72                           "NC",
  73                           "DEBUG_UART_TX",
  74                           "DEBUG_UART_RX",
  75                           "DISP_RESET_N",
  76                           "SAMD_RSTEN_N",
  77                           "CHAT_CAM_PWR_EN",
  78                           "CAM2_RSTN",
  79                           "MDP_VSYNC_P", /* GPIO_10 */
  80                           "RGBC_IR_INT",
  81                           "NFC_VEN",
  82                           "CAM_MCLK0",
  83                           "CAM_MCLK1",
  84                           "NC",
  85                           "MASTER_RST_N",
  86                           "CCI_I2C_SDA0",
  87                           "CCI_I2C_SCL0",
  88                           "CCI_I2C_SDA1",
  89                           "CCI_I2C_SCL1", /* GPIO_20 */
  90                           "CAM_SOF",
  91                           "TOF_INT",
  92                           "TOF_RESET_N",
  93                           "NC",
  94                           "NC",
  95                           "NC",
  96                           "MAIN_CAM_PWR_EN",
  97                           "DVDT_ENABLE",
  98                           "DVDT_WRT_DET_AND",
  99                           "DVDT_WRT_DET_OR", /* GPIO_30 */
 100                           "WLC_INT_N",
 101                           "NC",
 102                           "CAMSENSOR_I2C_SDA",
 103                           "CAMSENSOR_I2C_SCL",
 104                           "NC",
 105                           "NC",
 106                           "NC",
 107                           "CC_DIR",
 108                           "NC",
 109                           "FP_RESET_N", /* GPIO_40 */
 110                           "NC",
 111                           "NC",
 112                           "NC",
 113                           "DISP_ERR_FG",
 114                           "BT_HCI_UART_CTS_N",
 115                           "BT_HCI_UART_RFR_N",
 116                           "BT_HCI_UART_TXD",
 117                           "BT_HCI_UART_TRXD",
 118                           "USB_AUDIO_EN1",
 119                           "SW_SERVICE", /* GPIO_50 */
 120                           "US_EURO_SEL",
 121                           "SAMD_BOOTL_PIN",
 122                           "CODEC_INT2_N",
 123                           "CODEC_INT1_N",
 124                           "APPS_I2C_SDA",
 125                           "APPS_I2C_SCL",
 126                           "FORCED_USB_BOOT",
 127                           "SDM_SWD_CLK",
 128                           "SDM_SWD_DAT",
 129                           "SAMD_RST", /* GPIO_60 */
 130                           "USB_PD_EN",
 131                           "NFC_DWLD_EN",
 132                           "NFC_IRQ",
 133                           "CODEC_RST_N",
 134                           "CODEC_SPI_MISO",
 135                           "CODEC_SPI_MOSI",
 136                           "CODEC_SPI_CLK",
 137                           "CODEC_SPI_CS_N",
 138                           "NC",
 139                           "CODEC_SLIMBUS_CLK", /* GPIO_70 */
 140                           "CODEC_SLIMBUS_DATA0",
 141                           "CODEC_SLIMBUS_DATA1",
 142                           "BT_FM_SLIMBUS_DATA",
 143                           "BT_FM_SLIMBUS_CLK",
 144                           "HW_ID_0",
 145                           "HW_ID_1",
 146                           "TX_GTR_THRES_IN",
 147                           "MODE_SEL2",
 148                           "NC",
 149                           "CAM1_RSTN", /* GPIO_80 */
 150                           "",
 151                           "",
 152                           "",
 153                           "",
 154                           "TS_I2C_SDA",
 155                           "TS_I2C_SCL",
 156                           "NC",
 157                           "NC",
 158                           "NC",
 159                           "NC", /* GPIO_90 */
 160                           "NC",
 161                           "NC",
 162                           "NC",
 163                           "NC",
 164                           "NC",
 165                           "NC",
 166                           "RFFE6_CLK",
 167                           "RFFE6_DATA",
 168                           "TS_RESET_N",
 169                           "", /* GPIO_100 */
 170                           "GRFC4",
 171                           "DEBUG_GPIO0",
 172                           "DEBUG_GPIO1",
 173                           "RF_LCD_ID_EN",
 174                           "UIM2_DATA",
 175                           "UIM2_CLK",
 176                           "UIM2_RESET",
 177                           "UIM2_PRESENT",
 178                           "UIM1_DATA",
 179                           "UIM1_CLK", /* GPIO_110 */
 180                           "UIM1_RESET",
 181                           "UIM1_PRESENT",
 182                           "NC",
 183                           "NC",
 184                           "NC",
 185                           "NFC_ESE_PWR_REQ",
 186                           "ACCEL_INT",
 187                           "GYRO_INT",
 188                           "COMPASS_INT",
 189                           "ALS_PROX_INT_N", /* GPIO_120 */
 190                           "FP_INT",
 191                           "RF_ID_EXTENTION",
 192                           "BAROMETER_INT",
 193                           "ACC_COVER_OPEN",
 194                           "TS_INT_N",
 195                           "TRAY_DET",
 196                           "GRFC3",
 197                           "NC",
 198                           "UIM2_DETECT_EN",
 199                           "QLINK_REQUEST", /* GPIO_130 */
 200                           "QLINK_ENABLE",
 201                           "GRFC2",
 202                           "TS_VDDIO_EN",
 203                           "WMSS_RESET_N",
 204                           "PA_INDICATOR_OR",
 205                           "GRFC1",
 206                           "RFFE3_DATA",
 207                           "RFFE3_CLK",
 208                           "RFFE4_DATA",
 209                           "RFFE4_CLK", /* GPIO_140 */
 210                           "RFFE5_DATA",
 211                           "RFFE5_CLK",
 212                           "GNSS_EN",
 213                           "MSS_LTE_COXM_TXD",
 214                           "MSS_LTE_COXM_RXD",
 215                           "RFFE2_DATA",
 216                           "RFFE2_CLK",
 217                           "RFFE1_DATA",
 218                           "RFFE1_CLK";
 219
 220         ts_vddio_en: ts-vddio-en-state {
 221                 pins = "gpio133";
 222                 function = "gpio";
 223                 drive-strength = <2>;
 224                 bias-disable;
 225                 output-high;
 226         };
 227 };
 228
 229 &vreg_l14a_1p8 {
 230         regulator-min-microvolt = <1840000>;
 231         regulator-max-microvolt = <1840000>;
 232 };
 233
 234 &vreg_l22a_2p8 {
 235         /* Note: Round-down from 2700000 to be a multiple of PLDO step-size 8000 */
 236         regulator-min-microvolt = <2696000>;
 237         regulator-max-microvolt = <2696000>;
 238 };
 239
 240 &vreg_l28a_2p8 {
 241         regulator-min-microvolt = <3000000>;
 242         regulator-max-microvolt = <3000000>;
 243 };