arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
   4  * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
   5  * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/leds/common.h>
  12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  13 #include "sdm845.dtsi"
  14 #include "pm8998.dtsi"
  15 #include "pmi8998.dtsi"
  16
  17 / {
  18         model = "SHIFT SHIFT6mq";
  19         compatible = "shift,axolotl", "qcom,sdm845";
  20         qcom,msm-id = <321 0x20001>;
  21         qcom,board-id = <11 0>;
  22
  23         aliases {
  24                 display0 = &framebuffer0;
  25                 serial0 = &uart9;
  26                 serial1 = &uart6;
  27         };
  28
  29         chosen {
  30                 #address-cells = <2>;
  31                 #size-cells = <2>;
  32                 ranges;
  33
  34                 stdout-path = "serial0";
  35
  36                 /* Use framebuffer setup by the bootloader. */
  37                 framebuffer0: framebuffer@9d400000 {
  38                         compatible = "simple-framebuffer";
  39                         reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
  40                         width = <1080>;
  41                         height = <2160>;
  42                         stride = <(1080 * 4)>;
  43                         format = "a8r8g8b8";
  44                 };
  45         };
  46
  47         gpio-keys {
  48                 compatible = "gpio-keys";
  49                 autorepeat;
  50
  51                 pinctrl-names = "default";
  52                 pinctrl-0 = <&volume_up_gpio>;
  53
  54                 key-vol-up {
  55                         label = "volume_up";
  56                         linux,code = <KEY_VOLUMEUP>;
  57                         gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
  58                         debounce-interval = <15>;
  59                 };
  60         };
  61
  62         reserved-memory {
  63                 framebuffer_region@9d400000 {
  64                         reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
  65                         no-map;
  66                 };
  67
  68                 ramoops: ramoops@b0000000 {
  69                         compatible = "ramoops";
  70                         reg = <0 0xb0000000 0 0x00400000>;
  71                         record-size = <0x40000>;
  72                         console-size = <0x40000>;
  73                         ftrace-size = <0x40000>;
  74                         pmsg-size = <0x200000>;
  75                         ecc-size = <0x0>;
  76                 };
  77         };
  78
  79         battery: battery {
  80                 compatible = "simple-battery";
  81
  82                 charge-full-design-microamp-hours = <3850000>;
  83                 voltage-min-design-microvolt = <3600000>;
  84                 voltage-max-design-microvolt = <4400000>;
  85         };
  86
  87         vph_pwr: vph-pwr-regulator {
  88                 compatible = "regulator-fixed";
  89                 regulator-name = "vph_pwr";
  90                 regulator-min-microvolt = <3700000>;
  91                 regulator-max-microvolt = <3700000>;
  92         };
  93
  94         vreg_s4a_1p8: pm8998-smps4 {
  95                 compatible = "regulator-fixed";
  96                 regulator-name = "vreg_s4a_1p8";
  97
  98                 regulator-min-microvolt = <1800000>;
  99                 regulator-max-microvolt = <1800000>;
 100
 101                 regulator-always-on;
 102                 regulator-boot-on;
 103
 104                 vin-supply = <&vph_pwr>;
 105         };
 106 };
 107
 108 &adsp_pas {
 109         status = "okay";
 110         firmware-name = "/*(DEBLOBBED)*/";
 111 };
 112
 113 &apps_rsc {
 114         regulators-0 {
 115                 compatible = "qcom,pm8998-rpmh-regulators";
 116                 qcom,pmic-id = "a";
 117
 118                 vdd-s1-supply = <&vph_pwr>;
 119                 vdd-s2-supply = <&vph_pwr>;
 120                 vdd-s3-supply = <&vph_pwr>;
 121                 vdd-s4-supply = <&vph_pwr>;
 122                 vdd-s5-supply = <&vph_pwr>;
 123                 vdd-s6-supply = <&vph_pwr>;
 124                 vdd-s7-supply = <&vph_pwr>;
 125                 vdd-s8-supply = <&vph_pwr>;
 126                 vdd-s9-supply = <&vph_pwr>;
 127                 vdd-s10-supply = <&vph_pwr>;
 128                 vdd-s11-supply = <&vph_pwr>;
 129                 vdd-s12-supply = <&vph_pwr>;
 130                 vdd-s13-supply = <&vph_pwr>;
 131                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
 132                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 133                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
 134                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
 135                 vdd-l6-supply = <&vph_pwr>;
 136                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 137                 vdd-l9-supply = <&vreg_bob>;
 138                 vdd-l10-l23-l25-supply = <&vreg_bob>;
 139                 vdd-l13-l19-l21-supply = <&vreg_bob>;
 140                 vdd-l16-l28-supply = <&vreg_bob>;
 141                 vdd-l18-l22-supply = <&vreg_bob>;
 142                 vdd-l20-l24-supply = <&vreg_bob>;
 143                 vdd-l26-supply = <&vreg_s3a_1p35>;
 144                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
 145
 146                 vreg_s2a_1p125: smps2 {
 147                         regulator-min-microvolt = <1100000>;
 148                         regulator-max-microvolt = <1100000>;
 149                 };
 150
 151                 vreg_s3a_1p35: smps3 {
 152                         regulator-min-microvolt = <1352000>;
 153                         regulator-max-microvolt = <1352000>;
 154                 };
 155
 156                 vreg_s5a_2p04: smps5 {
 157                         regulator-min-microvolt = <1904000>;
 158                         regulator-max-microvolt = <2040000>;
 159                 };
 160
 161                 vreg_s7a_1p025: smps7 {
 162                         regulator-min-microvolt = <900000>;
 163                         regulator-max-microvolt = <1028000>;
 164                 };
 165
 166                 vdd_qusb_hs0:
 167                 vdda_hp_pcie_core:
 168                 vdda_mipi_csi0_0p9:
 169                 vdda_mipi_csi1_0p9:
 170                 vdda_mipi_csi2_0p9:
 171                 vdda_mipi_dsi0_pll:
 172                 vdda_mipi_dsi1_pll:
 173                 vdda_qlink_lv:
 174                 vdda_qlink_lv_ck:
 175                 vdda_qrefs_0p875:
 176                 vdda_pcie_core:
 177                 vdda_pll_cc_ebi01:
 178                 vdda_pll_cc_ebi23:
 179                 vdda_sp_sensor:
 180                 vdda_ufs1_core:
 181                 vdda_ufs2_core:
 182                 vdda_usb1_ss_core:
 183                 vdda_usb2_ss_core:
 184                 vreg_l1a_0p875: ldo1 {
 185                         regulator-min-microvolt = <880000>;
 186                         regulator-max-microvolt = <880000>;
 187                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 188                 };
 189
 190                 vddpx_10:
 191                 vreg_l2a_1p2: ldo2 {
 192                         regulator-min-microvolt = <1200000>;
 193                         regulator-max-microvolt = <1200000>;
 194                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 195                         regulator-always-on;
 196                 };
 197
 198                 vreg_l3a_1p0: ldo3 {
 199                         regulator-min-microvolt = <1000000>;
 200                         regulator-max-microvolt = <1000000>;
 201                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 202                 };
 203
 204                 vdd_wcss_cx:
 205                 vdd_wcss_mx:
 206                 vdda_wcss_pll:
 207                 vreg_l5a_0p8: ldo5 {
 208                         regulator-min-microvolt = <800000>;
 209                         regulator-max-microvolt = <800000>;
 210                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 211                 };
 212
 213                 vddpx_13:
 214                 vreg_l6a_1p8: ldo6 {
 215                         regulator-min-microvolt = <1856000>;
 216                         regulator-max-microvolt = <1856000>;
 217                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 218                 };
 219
 220                 vreg_l7a_1p8: ldo7 {
 221                         regulator-min-microvolt = <1800000>;
 222                         regulator-max-microvolt = <1800000>;
 223                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 224                 };
 225
 226                 vreg_l8a_1p2: ldo8 {
 227                         regulator-min-microvolt = <1200000>;
 228                         regulator-max-microvolt = <1248000>;
 229                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 230                 };
 231
 232                 vreg_l9a_1p8: ldo9 {
 233                         regulator-min-microvolt = <1704000>;
 234                         regulator-max-microvolt = <2928000>;
 235                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 236                 };
 237
 238                 vreg_l10a_1p8: ldo10 {
 239                         regulator-min-microvolt = <1704000>;
 240                         regulator-max-microvolt = <2928000>;
 241                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 242                 };
 243
 244                 vreg_l11a_1p0: ldo11 {
 245                         regulator-min-microvolt = <1000000>;
 246                         regulator-max-microvolt = <1048000>;
 247                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 248                 };
 249
 250                 vdd_qfprom:
 251                 vdd_qfprom_sp:
 252                 vdda_apc1_cs_1p8:
 253                 vdda_gfx_cs_1p8:
 254                 vdda_qrefs_1p8:
 255                 vdda_qusb_hs0_1p8:
 256                 vddpx_11:
 257                 vreg_l12a_1p8: ldo12 {
 258                         regulator-min-microvolt = <1800000>;
 259                         regulator-max-microvolt = <1800000>;
 260                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 261                 };
 262
 263                 vddpx_2:
 264                 vreg_l13a_2p95: ldo13 {
 265                         regulator-min-microvolt = <1800000>;
 266                         regulator-max-microvolt = <2960000>;
 267                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 268                 };
 269
 270                 vreg_l14a_1p88: ldo14 {
 271                         regulator-min-microvolt = <1800000>;
 272                         regulator-max-microvolt = <1800000>;
 273                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 274                 };
 275
 276                 vreg_l15a_1p8: ldo15 {
 277                         regulator-min-microvolt = <1800000>;
 278                         regulator-max-microvolt = <1800000>;
 279                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 280                 };
 281
 282                 vreg_l16a_2p7: ldo16 {
 283                         regulator-min-microvolt = <2704000>;
 284                         regulator-max-microvolt = <2704000>;
 285                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 286                 };
 287
 288                 vreg_l17a_1p3: ldo17 {
 289                         regulator-min-microvolt = <1304000>;
 290                         regulator-max-microvolt = <1304000>;
 291                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 292                 };
 293
 294                 vreg_l18a_2p7: ldo18 {
 295                         regulator-min-microvolt = <2704000>;
 296                         regulator-max-microvolt = <2960000>;
 297                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 298                 };
 299
 300                 vreg_l19a_3p0: ldo19 {
 301                         regulator-min-microvolt = <2856000>;
 302                         regulator-max-microvolt = <3104000>;
 303                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 304                 };
 305
 306                 vreg_l20a_2p95: ldo20 {
 307                         regulator-min-microvolt = <2704000>;
 308                         regulator-max-microvolt = <2960000>;
 309                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 310                 };
 311
 312                 vreg_l21a_2p95: ldo21 {
 313                         regulator-min-microvolt = <2704000>;
 314                         regulator-max-microvolt = <2960000>;
 315                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 316                 };
 317
 318                 vreg_l22a_2p85: ldo22 {
 319                         regulator-min-microvolt = <2864000>;
 320                         regulator-max-microvolt = <3312000>;
 321                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 322                 };
 323
 324                 vreg_l23a_3p3: ldo23 {
 325                         regulator-min-microvolt = <3000000>;
 326                         regulator-max-microvolt = <3312000>;
 327                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 328                 };
 329
 330                 vdda_qusb_hs0_3p1:
 331                 vreg_l24a_3p075: ldo24 {
 332                         regulator-min-microvolt = <3088000>;
 333                         regulator-max-microvolt = <3088000>;
 334                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 335                 };
 336
 337                 vreg_l25a_3p3: ldo25 {
 338                         regulator-min-microvolt = <3300000>;
 339                         regulator-max-microvolt = <3312000>;
 340                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 341                 };
 342
 343                 vdda_hp_pcie_1p2:
 344                 vdda_hv_ebi0:
 345                 vdda_hv_ebi1:
 346                 vdda_hv_ebi2:
 347                 vdda_hv_ebi3:
 348                 vdda_mipi_csi_1p25:
 349                 vdda_mipi_dsi0_1p2:
 350                 vdda_mipi_dsi1_1p2:
 351                 vdda_pcie_1p2:
 352                 vdda_ufs1_1p2:
 353                 vdda_ufs2_1p2:
 354                 vdda_usb1_ss_1p2:
 355                 vdda_usb2_ss_1p2:
 356                 vreg_l26a_1p2: ldo26 {
 357                         regulator-min-microvolt = <1200000>;
 358                         regulator-max-microvolt = <1200000>;
 359                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 360                 };
 361
 362                 vreg_l28a_3p0: ldo28 {
 363                         regulator-min-microvolt = <2856000>;
 364                         regulator-max-microvolt = <3008000>;
 365                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 366                 };
 367
 368                 vreg_lvs1a_1p8: lvs1 {
 369                         regulator-min-microvolt = <1800000>;
 370                         regulator-max-microvolt = <1800000>;
 371                 };
 372
 373                 vreg_lvs2a_1p8: lvs2 {
 374                         regulator-min-microvolt = <1800000>;
 375                         regulator-max-microvolt = <1800000>;
 376                 };
 377         };
 378
 379         regulators-1 {
 380                 compatible = "qcom,pmi8998-rpmh-regulators";
 381                 qcom,pmic-id = "b";
 382
 383                 vdd-bob-supply = <&vph_pwr>;
 384
 385                 vreg_bob: bob {
 386                         regulator-min-microvolt = <3312000>;
 387                         regulator-max-microvolt = <3600000>;
 388                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 389                         regulator-allow-bypass;
 390                 };
 391         };
 392
 393         regulators-2 {
 394                 compatible = "qcom,pm8005-rpmh-regulators";
 395                 qcom,pmic-id = "c";
 396
 397                 vdd-s1-supply = <&vph_pwr>;
 398                 vdd-s2-supply = <&vph_pwr>;
 399                 vdd-s3-supply = <&vph_pwr>;
 400                 vdd-s4-supply = <&vph_pwr>;
 401
 402                 vreg_s3c_0p6: smps3 {
 403                         regulator-min-microvolt = <600000>;
 404                         regulator-max-microvolt = <600000>;
 405                 };
 406         };
 407 };
 408
 409 &cdsp_pas {
 410         status = "okay";
 411         firmware-name = "/*(DEBLOBBED)*/";
 412 };
 413
 414 &gcc {
 415         protected-clocks = <GCC_QSPI_CORE_CLK>,
 416                            <GCC_QSPI_CORE_CLK_SRC>,
 417                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 418                            <GCC_LPASS_Q6_AXI_CLK>,
 419                            <GCC_LPASS_SWAY_CLK>;
 420 };
 421
 422 &gmu {
 423         status = "okay";
 424 };
 425
 426 &gpu {
 427         status = "okay";
 428
 429         zap-shader {
 430                 memory-region = <&gpu_mem>;
 431                 firmware-name = "/*(DEBLOBBED)*/";
 432         };
 433 };
 434
 435 &i2c5 {
 436         status = "okay";
 437
 438         touchscreen@38 {
 439                 compatible = "focaltech,fts8719";
 440                 reg = <0x38>;
 441                 wakeup-source;
 442                 interrupt-parent = <&tlmm>;
 443                 interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
 444                 vdd-supply = <&vreg_l28a_3p0>;
 445                 vcc-i2c-supply = <&vreg_l14a_1p88>;
 446
 447                 pinctrl-names = "default", "suspend";
 448                 pinctrl-0 = <&ts_int_active &ts_reset_active>;
 449                 pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
 450
 451                 reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 452                 irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
 453                 touchscreen-size-x = <1080>;
 454                 touchscreen-size-y = <2160>;
 455                 focaltech,max-touch-number = <5>;
 456         };
 457 };
 458
 459 &i2c10 {
 460         /* SMB1355@0x0C */
 461 };
 462
 463 &ipa {
 464         qcom,gsi-loader = "self";
 465         memory-region = <&ipa_fw_mem>;
 466         firmware-name = "/*(DEBLOBBED)*/";
 467         status = "okay";
 468 };
 469
 470 &mdss {
 471         status = "okay";
 472 };
 473
 474 &mdss_dsi0 {
 475         status = "okay";
 476         vdda-supply = <&vdda_mipi_dsi0_1p2>;
 477
 478         panel@0 {
 479                 compatible = "visionox,rm69299-shift";
 480                 status = "okay";
 481                 reg = <0>;
 482                 vdda-supply = <&vreg_l14a_1p88>;
 483                 vdd3p3-supply = <&vreg_l28a_3p0>;
 484
 485                 #address-cells = <1>;
 486                 #size-cells = <0>;
 487
 488                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 489
 490                 pinctrl-names = "default", "sleep";
 491                 pinctrl-0 = <&sde_dsi_active &sde_te_active>;
 492                 pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
 493
 494                 port {
 495                         panel_in_0: endpoint {
 496                                 remote-endpoint = <&mdss_dsi0_out>;
 497                         };
 498                 };
 499         };
 500 };
 501
 502 &mdss_dsi0_out {
 503         remote-endpoint = <&panel_in_0>;
 504         data-lanes = <0 1 2 3>;
 505 };
 506
 507 &mdss_dsi0_phy {
 508         status = "okay";
 509         vdds-supply = <&vdda_mipi_dsi0_pll>;
 510 };
 511
 512 &mss_pil {
 513         status = "okay";
 514         firmware-name = "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/";
 515 };
 516
 517 &pm8998_gpios {
 518         volume_up_gpio: pm8998-gpio6-state {
 519                 pinconf {
 520                         pins = "gpio6";
 521                         function = "normal";
 522                         input-enable;
 523                         bias-pull-up;
 524                         qcom,drive-strength = <0>;
 525                 };
 526         };
 527 };
 528
 529 &pmi8998_charger {
 530         monitored-battery = <&battery>;
 531
 532         status = "okay";
 533 };
 534
 535 &pm8998_resin {
 536         linux,code = <KEY_VOLUMEDOWN>;
 537         status = "okay";
 538 };
 539
 540 &pmi8998_lpg {
 541         status = "okay";
 542
 543         multi-led {
 544                 color = <LED_COLOR_ID_RGB>;
 545                 function = LED_FUNCTION_STATUS;
 546
 547                 #address-cells = <1>;
 548                 #size-cells = <0>;
 549
 550                 led@3 {
 551                         reg = <3>;
 552                         color = <LED_COLOR_ID_BLUE>;
 553                 };
 554
 555                 led@4 {
 556                         reg = <4>;
 557                         color = <LED_COLOR_ID_GREEN>;
 558                 };
 559
 560                 led@5 {
 561                         reg = <5>;
 562                         color = <LED_COLOR_ID_RED>;
 563                 };
 564         };
 565 };
 566
 567 &pmi8998_flash {
 568         status = "okay";
 569
 570         led-0 {
 571                 function = LED_FUNCTION_FLASH;
 572                 color = <LED_COLOR_ID_WHITE>;
 573                 led-sources = <1>;
 574                 led-max-microamp = <100000>;
 575                 flash-max-microamp = <1100000>;
 576                 flash-max-timeout-us = <1280000>;
 577         };
 578
 579         led-1 {
 580                 function = LED_FUNCTION_FLASH;
 581                 color = <LED_COLOR_ID_YELLOW>;
 582                 led-sources = <2>;
 583                 led-max-microamp = <100000>;
 584                 flash-max-microamp = <1100000>;
 585                 flash-max-timeout-us = <1280000>;
 586         };
 587 };
 588
 589 &qup_uart9_rx {
 590         drive-strength = <2>;
 591         bias-pull-up;
 592 };
 593
 594 &qup_uart9_tx {
 595         drive-strength = <2>;
 596         bias-disable;
 597 };
 598
 599 &qupv3_id_0 {
 600         status = "okay";
 601 };
 602
 603 &qupv3_id_1 {
 604         status = "okay";
 605 };
 606
 607 &slpi_pas {
 608         firmware-name = "/*(DEBLOBBED)*/";
 609         status = "okay";
 610 };
 611
 612 &tlmm {
 613         gpio-reserved-ranges = <0 4>, <81 4>;
 614
 615         sde_dsi_active: sde-dsi-active-state {
 616                 pins = "gpio6", "gpio11";
 617                 function = "gpio";
 618                 drive-strength = <8>;
 619                 bias-disable;
 620         };
 621
 622         sde_dsi_suspend: sde-dsi-suspend-state {
 623                 pins = "gpio6", "gpio11";
 624                 function = "gpio";
 625                 drive-strength = <2>;
 626                 bias-pull-down;
 627         };
 628
 629         sde_te_active: sde-te-active-state {
 630                 pins = "gpio10";
 631                 function = "mdp_vsync";
 632                 drive-strength = <2>;
 633                 bias-pull-down;
 634         };
 635
 636         sde_te_suspend: sde-te-suspend-state {
 637                 pins = "gpio10";
 638                 function = "mdp_vsync";
 639                 drive-strength = <2>;
 640                 bias-pull-down;
 641         };
 642
 643         ts_int_active: ts-int-active-state {
 644                 pins = "gpio125";
 645                 function = "gpio";
 646                 drive-strength = <8>;
 647                 bias-pull-up;
 648         };
 649
 650         ts_int_suspend: ts-int-suspend-state {
 651                 pins = "gpio125";
 652                 function = "gpio";
 653                 drive-strength = <2>;
 654                 bias-pull-down;
 655         };
 656
 657         ts_reset_active: ts-reset-active-state {
 658                 pins = "gpio99";
 659                 function = "gpio";
 660                 drive-strength = <8>;
 661                 bias-pull-up;
 662         };
 663
 664         ts_reset_suspend: ts-reset-suspend-state {
 665                 pins = "gpio99";
 666                 function = "gpio";
 667                 drive-strength = <2>;
 668                 bias-pull-down;
 669         };
 670 };
 671
 672 &uart6 {
 673         status = "okay";
 674
 675         pinctrl-0 = <&qup_uart6_4pin>;
 676
 677         bluetooth {
 678                 compatible = "qcom,wcn3990-bt";
 679
 680                 /*
 681                  * This path is relative to the qca/
 682                  * subdir under lib/firmware.
 683                  */
 684                 firmware-name = "/*(DEBLOBBED)*/";
 685
 686                 vddio-supply = <&vreg_s4a_1p8>;
 687                 vddxo-supply = <&vreg_l7a_1p8>;
 688                 vddrf-supply = <&vreg_l17a_1p3>;
 689                 vddch0-supply = <&vreg_l25a_3p3>;
 690                 max-speed = <3200000>;
 691         };
 692 };
 693
 694 &uart9 {
 695         status = "okay";
 696 };
 697
 698 &ufs_mem_hc {
 699         status = "okay";
 700
 701         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 702
 703         vcc-supply = <&vreg_l20a_2p95>;
 704         vcc-max-microamp = <600000>;
 705 };
 706
 707 &ufs_mem_phy {
 708         status = "okay";
 709
 710         vdda-phy-supply = <&vdda_ufs1_core>;
 711         vdda-pll-supply = <&vdda_ufs1_1p2>;
 712 };
 713
 714 &usb_1 {
 715         status = "okay";
 716 };
 717
 718 &usb_1_dwc3 {
 719         dr_mode = "peripheral";
 720 };
 721
 722 &usb_1_hsphy {
 723         status = "okay";
 724
 725         vdd-supply = <&vreg_l1a_0p875>;
 726         vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 727         vdda-pll-supply = <&vreg_l12a_1p8>;
 728 };
 729
 730 &usb_1_qmpphy {
 731         status = "okay";
 732
 733         vdda-phy-supply = <&vreg_l26a_1p2>;
 734         vdda-pll-supply = <&vreg_l1a_0p875>;
 735 };
 736
 737 &venus {
 738         status = "okay";
 739         firmware-name = "/*(DEBLOBBED)*/";
 740 };
 741
 742 &wifi {
 743         status = "okay";
 744
 745         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 746         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 747         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 748         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 749         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 750
 751         qcom,snoc-host-cap-8bit-quirk;
 752 };