arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (c) 2022, Alexander Martinz <amartinz@shiftphones.com>
   4  * Copyright (c) 2022, Caleb Connolly <caleb@connolly.tech>
   5  * Copyright (c) 2022, Dylan Van Assche <me@dylanvanassche.be>
   6  */
   7
   8 /dts-v1/;
   9
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/leds/common.h>
  12 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  13 #include "sdm845.dtsi"
  14 #include "pm8998.dtsi"
  15 #include "pmi8998.dtsi"
  16
  17 / {
  18         model = "SHIFT SHIFT6mq";
  19         compatible = "shift,axolotl", "qcom,sdm845";
  20         qcom,msm-id = <321 0x20001>;
  21         qcom,board-id = <11 0>;
  22
  23         aliases {
  24                 display0 = &framebuffer0;
  25                 serial0 = &uart9;
  26         };
  27
  28         chosen {
  29                 #address-cells = <2>;
  30                 #size-cells = <2>;
  31                 ranges;
  32
  33                 stdout-path = "serial0";
  34
  35                 /* Use framebuffer setup by the bootloader. */
  36                 framebuffer0: framebuffer@9d400000 {
  37                         compatible = "simple-framebuffer";
  38                         reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
  39                         width = <1080>;
  40                         height = <2160>;
  41                         stride = <(1080 * 4)>;
  42                         format = "a8r8g8b8";
  43                 };
  44         };
  45
  46         gpio-keys {
  47                 compatible = "gpio-keys";
  48                 autorepeat;
  49
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&volume_up_gpio>;
  52
  53                 key-vol-up {
  54                         label = "volume_up";
  55                         linux,code = <KEY_VOLUMEUP>;
  56                         gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
  57                         debounce-interval = <15>;
  58                 };
  59         };
  60
  61         reserved-memory {
  62                 framebuffer_region@9d400000 {
  63                         reg = <0x0 0x9d400000 0x0 (1080 * 2160 * 4)>;
  64                         no-map;
  65                 };
  66
  67                 ramoops: ramoops@b0000000 {
  68                         compatible = "ramoops";
  69                         reg = <0 0xb0000000 0 0x00400000>;
  70                         record-size = <0x40000>;
  71                         console-size = <0x40000>;
  72                         ftrace-size = <0x40000>;
  73                         pmsg-size = <0x200000>;
  74                         ecc-size = <0x0>;
  75                 };
  76         };
  77
  78         battery: battery {
  79                 compatible = "simple-battery";
  80
  81                 charge-full-design-microamp-hours = <3850000>;
  82                 voltage-min-design-microvolt = <3600000>;
  83                 voltage-max-design-microvolt = <4400000>;
  84         };
  85
  86         vph_pwr: vph-pwr-regulator {
  87                 compatible = "regulator-fixed";
  88                 regulator-name = "vph_pwr";
  89                 regulator-min-microvolt = <3700000>;
  90                 regulator-max-microvolt = <3700000>;
  91         };
  92
  93         vreg_s4a_1p8: pm8998-smps4 {
  94                 compatible = "regulator-fixed";
  95                 regulator-name = "vreg_s4a_1p8";
  96
  97                 regulator-min-microvolt = <1800000>;
  98                 regulator-max-microvolt = <1800000>;
  99
 100                 regulator-always-on;
 101                 regulator-boot-on;
 102
 103                 vin-supply = <&vph_pwr>;
 104         };
 105 };
 106
 107 &adsp_pas {
 108         status = "okay";
 109         firmware-name = "/*(DEBLOBBED)*/";
 110 };
 111
 112 &apps_rsc {
 113         regulators-0 {
 114                 compatible = "qcom,pm8998-rpmh-regulators";
 115                 qcom,pmic-id = "a";
 116
 117                 vdd-s1-supply = <&vph_pwr>;
 118                 vdd-s2-supply = <&vph_pwr>;
 119                 vdd-s3-supply = <&vph_pwr>;
 120                 vdd-s4-supply = <&vph_pwr>;
 121                 vdd-s5-supply = <&vph_pwr>;
 122                 vdd-s6-supply = <&vph_pwr>;
 123                 vdd-s7-supply = <&vph_pwr>;
 124                 vdd-s8-supply = <&vph_pwr>;
 125                 vdd-s9-supply = <&vph_pwr>;
 126                 vdd-s10-supply = <&vph_pwr>;
 127                 vdd-s11-supply = <&vph_pwr>;
 128                 vdd-s12-supply = <&vph_pwr>;
 129                 vdd-s13-supply = <&vph_pwr>;
 130                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
 131                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 132                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
 133                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
 134                 vdd-l6-supply = <&vph_pwr>;
 135                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 136                 vdd-l9-supply = <&vreg_bob>;
 137                 vdd-l10-l23-l25-supply = <&vreg_bob>;
 138                 vdd-l13-l19-l21-supply = <&vreg_bob>;
 139                 vdd-l16-l28-supply = <&vreg_bob>;
 140                 vdd-l18-l22-supply = <&vreg_bob>;
 141                 vdd-l20-l24-supply = <&vreg_bob>;
 142                 vdd-l26-supply = <&vreg_s3a_1p35>;
 143                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
 144
 145                 vreg_s2a_1p125: smps2 {
 146                         regulator-min-microvolt = <1100000>;
 147                         regulator-max-microvolt = <1100000>;
 148                 };
 149
 150                 vreg_s3a_1p35: smps3 {
 151                         regulator-min-microvolt = <1352000>;
 152                         regulator-max-microvolt = <1352000>;
 153                 };
 154
 155                 vreg_s5a_2p04: smps5 {
 156                         regulator-min-microvolt = <1904000>;
 157                         regulator-max-microvolt = <2040000>;
 158                 };
 159
 160                 vreg_s7a_1p025: smps7 {
 161                         regulator-min-microvolt = <900000>;
 162                         regulator-max-microvolt = <1028000>;
 163                 };
 164
 165                 vdd_qusb_hs0:
 166                 vdda_hp_pcie_core:
 167                 vdda_mipi_csi0_0p9:
 168                 vdda_mipi_csi1_0p9:
 169                 vdda_mipi_csi2_0p9:
 170                 vdda_mipi_dsi0_pll:
 171                 vdda_mipi_dsi1_pll:
 172                 vdda_qlink_lv:
 173                 vdda_qlink_lv_ck:
 174                 vdda_qrefs_0p875:
 175                 vdda_pcie_core:
 176                 vdda_pll_cc_ebi01:
 177                 vdda_pll_cc_ebi23:
 178                 vdda_sp_sensor:
 179                 vdda_ufs1_core:
 180                 vdda_ufs2_core:
 181                 vdda_usb1_ss_core:
 182                 vdda_usb2_ss_core:
 183                 vreg_l1a_0p875: ldo1 {
 184                         regulator-min-microvolt = <880000>;
 185                         regulator-max-microvolt = <880000>;
 186                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 187                 };
 188
 189                 vddpx_10:
 190                 vreg_l2a_1p2: ldo2 {
 191                         regulator-min-microvolt = <1200000>;
 192                         regulator-max-microvolt = <1200000>;
 193                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 194                         regulator-always-on;
 195                 };
 196
 197                 vreg_l3a_1p0: ldo3 {
 198                         regulator-min-microvolt = <1000000>;
 199                         regulator-max-microvolt = <1000000>;
 200                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 201                 };
 202
 203                 vdd_wcss_cx:
 204                 vdd_wcss_mx:
 205                 vdda_wcss_pll:
 206                 vreg_l5a_0p8: ldo5 {
 207                         regulator-min-microvolt = <800000>;
 208                         regulator-max-microvolt = <800000>;
 209                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 210                 };
 211
 212                 vddpx_13:
 213                 vreg_l6a_1p8: ldo6 {
 214                         regulator-min-microvolt = <1856000>;
 215                         regulator-max-microvolt = <1856000>;
 216                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 217                 };
 218
 219                 vreg_l7a_1p8: ldo7 {
 220                         regulator-min-microvolt = <1800000>;
 221                         regulator-max-microvolt = <1800000>;
 222                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 223                 };
 224
 225                 vreg_l8a_1p2: ldo8 {
 226                         regulator-min-microvolt = <1200000>;
 227                         regulator-max-microvolt = <1248000>;
 228                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 229                 };
 230
 231                 vreg_l9a_1p8: ldo9 {
 232                         regulator-min-microvolt = <1704000>;
 233                         regulator-max-microvolt = <2928000>;
 234                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 235                 };
 236
 237                 vreg_l10a_1p8: ldo10 {
 238                         regulator-min-microvolt = <1704000>;
 239                         regulator-max-microvolt = <2928000>;
 240                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 241                 };
 242
 243                 vreg_l11a_1p0: ldo11 {
 244                         regulator-min-microvolt = <1000000>;
 245                         regulator-max-microvolt = <1048000>;
 246                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 247                 };
 248
 249                 vdd_qfprom:
 250                 vdd_qfprom_sp:
 251                 vdda_apc1_cs_1p8:
 252                 vdda_gfx_cs_1p8:
 253                 vdda_qrefs_1p8:
 254                 vdda_qusb_hs0_1p8:
 255                 vddpx_11:
 256                 vreg_l12a_1p8: ldo12 {
 257                         regulator-min-microvolt = <1800000>;
 258                         regulator-max-microvolt = <1800000>;
 259                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 260                 };
 261
 262                 vddpx_2:
 263                 vreg_l13a_2p95: ldo13 {
 264                         regulator-min-microvolt = <1800000>;
 265                         regulator-max-microvolt = <2960000>;
 266                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 267                 };
 268
 269                 vreg_l14a_1p88: ldo14 {
 270                         regulator-min-microvolt = <1800000>;
 271                         regulator-max-microvolt = <1800000>;
 272                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 273                 };
 274
 275                 vreg_l15a_1p8: ldo15 {
 276                         regulator-min-microvolt = <1800000>;
 277                         regulator-max-microvolt = <1800000>;
 278                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 279                 };
 280
 281                 vreg_l16a_2p7: ldo16 {
 282                         regulator-min-microvolt = <2704000>;
 283                         regulator-max-microvolt = <2704000>;
 284                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 285                 };
 286
 287                 vreg_l17a_1p3: ldo17 {
 288                         regulator-min-microvolt = <1304000>;
 289                         regulator-max-microvolt = <1304000>;
 290                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 291                 };
 292
 293                 vreg_l18a_2p7: ldo18 {
 294                         regulator-min-microvolt = <2704000>;
 295                         regulator-max-microvolt = <2960000>;
 296                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 297                 };
 298
 299                 vreg_l19a_3p0: ldo19 {
 300                         regulator-min-microvolt = <2856000>;
 301                         regulator-max-microvolt = <3104000>;
 302                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 303                 };
 304
 305                 vreg_l20a_2p95: ldo20 {
 306                         regulator-min-microvolt = <2704000>;
 307                         regulator-max-microvolt = <2960000>;
 308                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 309                 };
 310
 311                 vreg_l21a_2p95: ldo21 {
 312                         regulator-min-microvolt = <2704000>;
 313                         regulator-max-microvolt = <2960000>;
 314                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 315                 };
 316
 317                 vreg_l22a_2p85: ldo22 {
 318                         regulator-min-microvolt = <2864000>;
 319                         regulator-max-microvolt = <3312000>;
 320                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 321                 };
 322
 323                 vreg_l23a_3p3: ldo23 {
 324                         regulator-min-microvolt = <3000000>;
 325                         regulator-max-microvolt = <3312000>;
 326                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 327                 };
 328
 329                 vdda_qusb_hs0_3p1:
 330                 vreg_l24a_3p075: ldo24 {
 331                         regulator-min-microvolt = <3088000>;
 332                         regulator-max-microvolt = <3088000>;
 333                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 334                 };
 335
 336                 vreg_l25a_3p3: ldo25 {
 337                         regulator-min-microvolt = <3300000>;
 338                         regulator-max-microvolt = <3312000>;
 339                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 340                 };
 341
 342                 vdda_hp_pcie_1p2:
 343                 vdda_hv_ebi0:
 344                 vdda_hv_ebi1:
 345                 vdda_hv_ebi2:
 346                 vdda_hv_ebi3:
 347                 vdda_mipi_csi_1p25:
 348                 vdda_mipi_dsi0_1p2:
 349                 vdda_mipi_dsi1_1p2:
 350                 vdda_pcie_1p2:
 351                 vdda_ufs1_1p2:
 352                 vdda_ufs2_1p2:
 353                 vdda_usb1_ss_1p2:
 354                 vdda_usb2_ss_1p2:
 355                 vreg_l26a_1p2: ldo26 {
 356                         regulator-min-microvolt = <1200000>;
 357                         regulator-max-microvolt = <1200000>;
 358                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 359                 };
 360
 361                 vreg_l28a_3p0: ldo28 {
 362                         regulator-min-microvolt = <2856000>;
 363                         regulator-max-microvolt = <3008000>;
 364                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 365                 };
 366
 367                 vreg_lvs1a_1p8: lvs1 {
 368                         regulator-min-microvolt = <1800000>;
 369                         regulator-max-microvolt = <1800000>;
 370                 };
 371
 372                 vreg_lvs2a_1p8: lvs2 {
 373                         regulator-min-microvolt = <1800000>;
 374                         regulator-max-microvolt = <1800000>;
 375                 };
 376         };
 377
 378         regulators-1 {
 379                 compatible = "qcom,pmi8998-rpmh-regulators";
 380                 qcom,pmic-id = "b";
 381
 382                 vdd-bob-supply = <&vph_pwr>;
 383
 384                 vreg_bob: bob {
 385                         regulator-min-microvolt = <3312000>;
 386                         regulator-max-microvolt = <3600000>;
 387                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 388                         regulator-allow-bypass;
 389                 };
 390         };
 391
 392         regulators-2 {
 393                 compatible = "qcom,pm8005-rpmh-regulators";
 394                 qcom,pmic-id = "c";
 395
 396                 vdd-s1-supply = <&vph_pwr>;
 397                 vdd-s2-supply = <&vph_pwr>;
 398                 vdd-s3-supply = <&vph_pwr>;
 399                 vdd-s4-supply = <&vph_pwr>;
 400
 401                 vreg_s3c_0p6: smps3 {
 402                         regulator-min-microvolt = <600000>;
 403                         regulator-max-microvolt = <600000>;
 404                 };
 405         };
 406 };
 407
 408 &cdsp_pas {
 409         status = "okay";
 410         firmware-name = "/*(DEBLOBBED)*/";
 411 };
 412
 413 &dsi0 {
 414         status = "okay";
 415         vdda-supply = <&vdda_mipi_dsi0_1p2>;
 416
 417         panel@0 {
 418                 compatible = "visionox,rm69299-shift";
 419                 status = "okay";
 420                 reg = <0>;
 421                 vdda-supply = <&vreg_l14a_1p88>;
 422                 vdd3p3-supply = <&vreg_l28a_3p0>;
 423
 424                 #address-cells = <1>;
 425                 #size-cells = <0>;
 426
 427                 reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
 428
 429                 pinctrl-names = "default", "sleep";
 430                 pinctrl-0 = <&sde_dsi_active &sde_te_active>;
 431                 pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
 432
 433                 port {
 434                         panel_in_0: endpoint {
 435                                 remote-endpoint = <&dsi0_out>;
 436                         };
 437                 };
 438         };
 439 };
 440
 441 &dsi0_out {
 442         remote-endpoint = <&panel_in_0>;
 443         data-lanes = <0 1 2 3>;
 444 };
 445
 446 &dsi0_phy {
 447         status = "okay";
 448         vdds-supply = <&vdda_mipi_dsi0_pll>;
 449 };
 450
 451 &gcc {
 452         protected-clocks = <GCC_QSPI_CORE_CLK>,
 453                            <GCC_QSPI_CORE_CLK_SRC>,
 454                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 455                            <GCC_LPASS_Q6_AXI_CLK>,
 456                            <GCC_LPASS_SWAY_CLK>;
 457 };
 458
 459 &gmu {
 460         status = "okay";
 461 };
 462
 463 &gpu {
 464         status = "okay";
 465
 466         zap-shader {
 467                 memory-region = <&gpu_mem>;
 468                 firmware-name = "/*(DEBLOBBED)*/";
 469         };
 470 };
 471
 472 &i2c5 {
 473         status = "okay";
 474
 475         touchscreen@38 {
 476                 compatible = "focaltech,fts8719";
 477                 reg = <0x38>;
 478                 wakeup-source;
 479                 interrupt-parent = <&tlmm>;
 480                 interrupts = <125 0x2>;
 481                 vdd-supply = <&vreg_l28a_3p0>;
 482                 vcc-i2c-supply = <&vreg_l14a_1p88>;
 483
 484                 pinctrl-names = "default", "suspend";
 485                 pinctrl-0 = <&ts_int_active &ts_reset_active>;
 486                 pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
 487
 488                 reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
 489                 irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
 490                 touchscreen-size-x = <1080>;
 491                 touchscreen-size-y = <2160>;
 492                 focaltech,max-touch-number = <5>;
 493         };
 494 };
 495
 496 &ipa {
 497         status = "okay";
 498
 499         memory-region = <&ipa_fw_mem>;
 500         firmware-name = "/*(DEBLOBBED)*/";
 501 };
 502
 503 &mdss {
 504         status = "okay";
 505 };
 506
 507 &mss_pil {
 508         status = "okay";
 509         firmware-name = "/*(DEBLOBBED)*/", "/*(DEBLOBBED)*/";
 510 };
 511
 512 &pm8998_gpio {
 513         volume_up_gpio: pm8998-gpio6-state {
 514                 pinconf {
 515                         pins = "gpio6";
 516                         function = "normal";
 517                         input-enable;
 518                         bias-pull-up;
 519                         qcom,drive-strength = <0>;
 520                 };
 521         };
 522 };
 523
 524 &pm8998_pon {
 525         volume_down_resin: resin {
 526                 compatible = "qcom,pm8941-resin";
 527                 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 528                 debounce = <15625>;
 529                 bias-pull-up;
 530                 linux,code = <KEY_VOLUMEDOWN>;
 531         };
 532 };
 533
 534 &pmi8998_lpg {
 535         status = "okay";
 536
 537         multi-led {
 538                 color = <LED_COLOR_ID_RGB>;
 539                 function = LED_FUNCTION_STATUS;
 540
 541                 #address-cells = <1>;
 542                 #size-cells = <0>;
 543
 544                 led@3 {
 545                         reg = <3>;
 546                         color = <LED_COLOR_ID_BLUE>;
 547                 };
 548
 549                 led@4 {
 550                         reg = <4>;
 551                         color = <LED_COLOR_ID_GREEN>;
 552                 };
 553
 554                 led@5 {
 555                         reg = <5>;
 556                         color = <LED_COLOR_ID_RED>;
 557                 };
 558         };
 559 };
 560
 561 &qup_uart9_default {
 562         pinconf-rx {
 563                 pins = "gpio5";
 564                 drive-strength = <2>;
 565                 bias-pull-up;
 566         };
 567
 568         pinconf-tx {
 569                 pins = "gpio4";
 570                 drive-strength = <2>;
 571                 bias-disable;
 572         };
 573 };
 574
 575 &qupv3_id_0 {
 576         status = "okay";
 577 };
 578
 579 &qupv3_id_1 {
 580         status = "okay";
 581 };
 582
 583 &tlmm {
 584         gpio-reserved-ranges = <0 4>, <81 4>;
 585
 586         sde_dsi_active: sde-dsi-active {
 587                 mux {
 588                         pins = "gpio6", "gpio11";
 589                         function = "gpio";
 590                 };
 591
 592                 config {
 593                         pins = "gpio6", "gpio11";
 594                         drive-strength = <8>;
 595                         bias-disable;
 596                 };
 597         };
 598
 599         sde_dsi_suspend: sde-dsi-suspend {
 600                 mux {
 601                         pins = "gpio6", "gpio11";
 602                         function = "gpio";
 603                 };
 604
 605                 config {
 606                         pins = "gpio6", "gpio11";
 607                         drive-strength = <2>;
 608                         bias-pull-down;
 609                 };
 610         };
 611
 612         sde_te_active: sde-te-active {
 613                 mux {
 614                         pins = "gpio10";
 615                         function = "mdp_vsync";
 616                 };
 617
 618                 config {
 619                         pins = "gpio10";
 620                         drive-strength = <2>;
 621                         bias-pull-down;
 622                 };
 623         };
 624
 625         sde_te_suspend: sde-te-suspend {
 626                 mux {
 627                         pins = "gpio10";
 628                         function = "mdp_vsync";
 629                 };
 630
 631                 config {
 632                         pins = "gpio10";
 633                         drive-strength = <2>;
 634                         bias-pull-down;
 635                 };
 636         };
 637
 638         ts_int_active: ts-int-active {
 639                 mux {
 640                         pins = "gpio125";
 641                         function = "gpio";
 642                 };
 643
 644                 config {
 645                         pins = "gpio125";
 646                         drive-strength = <8>;
 647                         bias-pull-up;
 648                         input-enable;
 649                 };
 650         };
 651
 652         ts_int_suspend: ts-int-suspend {
 653                 mux {
 654                         pins = "gpio125";
 655                         function = "gpio";
 656                 };
 657
 658                 config {
 659                         pins = "gpio125";
 660                         drive-strength = <2>;
 661                         bias-pull-down;
 662                         input-enable;
 663                 };
 664         };
 665
 666         ts_reset_active: ts-reset-active {
 667                 mux {
 668                         pins = "gpio99";
 669                         function = "gpio";
 670                 };
 671
 672                 config {
 673                         pins = "gpio99";
 674                         drive-strength = <8>;
 675                         bias-pull-up;
 676                 };
 677         };
 678
 679         ts_reset_suspend: ts-reset-suspend {
 680                 mux {
 681                         pins = "gpio99";
 682                         function = "gpio";
 683                 };
 684
 685                 config {
 686                         pins = "gpio99";
 687                         drive-strength = <2>;
 688                         bias-pull-down;
 689                 };
 690         };
 691 };
 692
 693 &uart6 {
 694         status = "okay";
 695
 696         bluetooth {
 697                 compatible = "qcom,wcn3990-bt";
 698
 699                 vddio-supply = <&vreg_s4a_1p8>;
 700                 vddxo-supply = <&vreg_l7a_1p8>;
 701                 vddrf-supply = <&vreg_l17a_1p3>;
 702                 vddch0-supply = <&vreg_l25a_3p3>;
 703                 max-speed = <3200000>;
 704         };
 705 };
 706
 707 &uart9 {
 708         status = "okay";
 709 };
 710
 711 &ufs_mem_hc {
 712         status = "okay";
 713
 714         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 715
 716         vcc-supply = <&vreg_l20a_2p95>;
 717         vcc-max-microamp = <600000>;
 718 };
 719
 720 &ufs_mem_phy {
 721         status = "okay";
 722
 723         vdda-phy-supply = <&vdda_ufs1_core>;
 724         vdda-pll-supply = <&vdda_ufs1_1p2>;
 725 };
 726
 727 &usb_1 {
 728         status = "okay";
 729 };
 730
 731 &usb_1_dwc3 {
 732         dr_mode = "peripheral";
 733 };
 734
 735 &usb_1_hsphy {
 736         status = "okay";
 737
 738         vdd-supply = <&vreg_l1a_0p875>;
 739         vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 740         vdda-pll-supply = <&vreg_l12a_1p8>;
 741 };
 742
 743 &usb_1_qmpphy {
 744         status = "okay";
 745
 746         vdda-phy-supply = <&vreg_l26a_1p2>;
 747         vdda-pll-supply = <&vreg_l1a_0p875>;
 748 };
 749
 750 &venus {
 751         status = "okay";
 752         firmware-name = "/*(DEBLOBBED)*/";
 753 };
 754
 755 &wifi {
 756         status = "okay";
 757
 758         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 759         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 760         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 761         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 762         vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
 763
 764         qcom,snoc-host-cap-8bit-quirk;
 765 };