arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * SDM845 LG G7 / V35 (judyln / judyp) common device tree
   4  *
   5  * Copyright (c) 2022, The Linux Foundation. All rights reserved.
   6  */
   7
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
  10 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  11
  12 #include "sdm845.dtsi"
  13 #include "pm8998.dtsi"
  14 #include "pmi8998.dtsi"
  15
  16 /delete-node/ &adsp_mem;
  17 /delete-node/ &cdsp_mem;
  18 /delete-node/ &gpu_mem;
  19 /delete-node/ &ipa_fw_mem;
  20 /delete-node/ &mba_region;
  21 /delete-node/ &mpss_region;
  22 /delete-node/ &qseecom_mem;
  23 /delete-node/ &rmtfs_mem;
  24 /delete-node/ &slpi_mem;
  25 /delete-node/ &spss_mem;
  26 /delete-node/ &venus_mem;
  27 /delete-node/ &wlan_msa_mem;
  28
  29 / {
  30         chosen {
  31                 #address-cells = <2>;
  32                 #size-cells = <2>;
  33                 ranges;
  34         };
  35
  36         reserved-memory {
  37                 #address-cells = <2>;
  38                 #size-cells = <2>;
  39                 ranges;
  40
  41                 qseecom_mem: memory@b2000000 {
  42                         reg = <0 0xb2000000 0 0x1800000>;
  43                         no-map;
  44                 };
  45
  46                 gpu_mem: memory@8c415000 {
  47                         reg = <0 0x8c415000 0 0x2000>;
  48                         no-map;
  49                 };
  50
  51                 ipa_fw_mem: memory@8c400000 {
  52                         reg = <0 0x8c400000 0 0x10000>;
  53                         no-map;
  54                 };
  55
  56                 adsp_mem: memory@8c500000 {
  57                         reg = <0 0x8c500000 0 0x1e00000>;
  58                         no-map;
  59                 };
  60
  61                 wlan_msa_mem: memory@8e300000 {
  62                         reg = <0 0x8e300000 0 0x100000>;
  63                         no-map;
  64                 };
  65
  66                 mpss_region: memory@8e400000 {
  67                         reg = <0 0x8e400000 0 0x8900000>;
  68                         no-map;
  69                 };
  70
  71                 venus_mem: memory@96d00000 {
  72                         reg = <0 0x96d00000 0 0x500000>;
  73                         no-map;
  74                 };
  75
  76                 cdsp_mem: memory@97200000 {
  77                         reg = <0 0x97200000 0 0x800000>;
  78                         no-map;
  79                 };
  80
  81                 mba_region: memory@97a00000 {
  82                         reg = <0 0x97a00000 0 0x200000>;
  83                         no-map;
  84                 };
  85
  86                 slpi_mem: memory@97c00000 {
  87                         reg = <0 0x97c00000 0 0x1400000>;
  88                         no-map;
  89                 };
  90
  91                 spss_mem: memory@99000000 {
  92                         reg = <0 0x99000000 0 0x100000>;
  93                         no-map;
  94                 };
  95
  96                 /* Framebuffer region */
  97                 memory@9d400000 {
  98                         reg = <0x0 0x9d400000 0x0 0x2400000>;
  99                         no-map;
 100                 };
 101
 102                 /* rmtfs lower guard */
 103                 memory@f0800000 {
 104                         reg = <0 0xf0800000 0 0x1000>;
 105                         no-map;
 106                 };
 107
 108                 rmtfs_mem: memory@f0801000 {
 109                         compatible = "qcom,rmtfs-mem";
 110                         reg = <0 0xf0801000 0 0x200000>;
 111                         no-map;
 112
 113                         qcom,client-id = <1>;
 114                         qcom,vmid = <15>;
 115                 };
 116
 117                 /* rmtfs upper guard */
 118                 memory@f0a01000 {
 119                         reg = <0 0xf0a01000 0 0x1000>;
 120                         no-map;
 121                 };
 122         };
 123
 124         gpio-keys {
 125                 compatible = "gpio-keys";
 126
 127                 pinctrl-names = "default";
 128                 pinctrl-0 = <&vol_up_pin_a>;
 129
 130                 label = "GPIO Buttons";
 131
 132                 key-vol-up {
 133                         label = "Volume up";
 134                         linux,code = <KEY_VOLUMEUP>;
 135                         gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
 136                 };
 137         };
 138
 139         vph_pwr: vph-pwr-regulator {
 140                 compatible = "regulator-fixed";
 141                 regulator-name = "vph_pwr";
 142                 regulator-min-microvolt = <3700000>;
 143                 regulator-max-microvolt = <3700000>;
 144         };
 145
 146         /*
 147          * Apparently RPMh does not provide support for PM8998 S4 because it
 148          * is always-on; model it as a fixed regulator.
 149          */
 150         vreg_s4a_1p8: pm8998-smps4-regulator {
 151                 compatible = "regulator-fixed";
 152                 regulator-name = "vreg_s4a_1p8";
 153
 154                 regulator-min-microvolt = <1800000>;
 155                 regulator-max-microvolt = <1800000>;
 156
 157                 regulator-always-on;
 158                 regulator-boot-on;
 159
 160                 vin-supply = <&vph_pwr>;
 161         };
 162 };
 163
 164 &adsp_pas {
 165         status = "okay";
 166 };
 167
 168 &apps_rsc {
 169         regulators-0 {
 170                 compatible = "qcom,pm8998-rpmh-regulators";
 171                 qcom,pmic-id = "a";
 172
 173                 vdd-s1-supply = <&vph_pwr>;
 174                 vdd-s2-supply = <&vph_pwr>;
 175                 vdd-s3-supply = <&vph_pwr>;
 176                 vdd-s4-supply = <&vph_pwr>;
 177                 vdd-s5-supply = <&vph_pwr>;
 178                 vdd-s6-supply = <&vph_pwr>;
 179                 vdd-s7-supply = <&vph_pwr>;
 180                 vdd-s8-supply = <&vph_pwr>;
 181                 vdd-s9-supply = <&vph_pwr>;
 182                 vdd-s10-supply = <&vph_pwr>;
 183                 vdd-s11-supply = <&vph_pwr>;
 184                 vdd-s12-supply = <&vph_pwr>;
 185                 vdd-s13-supply = <&vph_pwr>;
 186                 vdd-l1-l27-supply = <&vreg_s7a_1p025>;
 187                 vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
 188                 vdd-l3-l11-supply = <&vreg_s7a_1p025>;
 189                 vdd-l4-l5-supply = <&vreg_s7a_1p025>;
 190                 vdd-l6-supply = <&vph_pwr>;
 191                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
 192                 vdd-l9-supply = <&vreg_bob>;
 193                 vdd-l10-l23-l25-supply = <&vreg_bob>;
 194                 vdd-l13-l19-l21-supply = <&vreg_bob>;
 195                 vdd-l16-l28-supply = <&vreg_bob>;
 196                 vdd-l18-l22-supply = <&vreg_bob>;
 197                 vdd-l20-l24-supply = <&vreg_bob>;
 198                 vdd-l26-supply = <&vreg_s3a_1p35>;
 199                 vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
 200
 201                 vreg_s2a_1p125: smps2 {
 202                         regulator-min-microvolt = <1100000>;
 203                         regulator-max-microvolt = <1100000>;
 204                 };
 205
 206                 vreg_s3a_1p35: smps3 {
 207                         regulator-min-microvolt = <1352000>;
 208                         regulator-max-microvolt = <1352000>;
 209                 };
 210
 211                 vreg_s5a_2p04: smps5 {
 212                         regulator-min-microvolt = <1904000>;
 213                         regulator-max-microvolt = <2040000>;
 214                 };
 215
 216                 vreg_s7a_1p025: smps7 {
 217                         regulator-min-microvolt = <900000>;
 218                         regulator-max-microvolt = <1028000>;
 219                 };
 220
 221                 vdd_qusb_hs0:
 222                 vdda_hp_pcie_core:
 223                 vdda_mipi_csi0_0p9:
 224                 vdda_mipi_csi1_0p9:
 225                 vdda_mipi_csi2_0p9:
 226                 vdda_mipi_dsi0_pll:
 227                 vdda_mipi_dsi1_pll:
 228                 vdda_qlink_lv:
 229                 vdda_qlink_lv_ck:
 230                 vdda_qrefs_0p875:
 231                 vdda_pcie_core:
 232                 vdda_pll_cc_ebi01:
 233                 vdda_pll_cc_ebi23:
 234                 vdda_sp_sensor:
 235                 vdda_ufs1_core:
 236                 vdda_ufs2_core:
 237                 vdda_usb1_ss_core:
 238                 vdda_usb2_ss_core:
 239                 vreg_l1a_0p875: ldo1 {
 240                         regulator-min-microvolt = <880000>;
 241                         regulator-max-microvolt = <880000>;
 242                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 243                 };
 244
 245                 vddpx_10:
 246                 vreg_l2a_1p2: ldo2 {
 247                         regulator-min-microvolt = <1200000>;
 248                         regulator-max-microvolt = <1200000>;
 249                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 250                         regulator-always-on;
 251                 };
 252
 253                 vreg_l3a_1p0: ldo3 {
 254                         regulator-min-microvolt = <1000000>;
 255                         regulator-max-microvolt = <1000000>;
 256                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 257                 };
 258
 259                 vdd_wcss_cx:
 260                 vdd_wcss_mx:
 261                 vdda_wcss_pll:
 262                 vreg_l5a_0p8: ldo5 {
 263                         regulator-min-microvolt = <800000>;
 264                         regulator-max-microvolt = <800000>;
 265                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 266                 };
 267
 268                 vddpx_13:
 269                 vreg_l6a_1p8: ldo6 {
 270                         regulator-min-microvolt = <1856000>;
 271                         regulator-max-microvolt = <1856000>;
 272                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 273                 };
 274
 275                 vreg_l7a_1p8: ldo7 {
 276                         regulator-min-microvolt = <1800000>;
 277                         regulator-max-microvolt = <1800000>;
 278                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 279                 };
 280
 281                 vreg_l8a_1p2: ldo8 {
 282                         regulator-min-microvolt = <1200000>;
 283                         regulator-max-microvolt = <1248000>;
 284                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 285                 };
 286
 287                 vreg_l9a_1p8: ldo9 {
 288                         regulator-min-microvolt = <1704000>;
 289                         regulator-max-microvolt = <2928000>;
 290                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 291                 };
 292
 293                 vreg_l10a_1p8: ldo10 {
 294                         regulator-min-microvolt = <1704000>;
 295                         regulator-max-microvolt = <2928000>;
 296                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 297                 };
 298
 299                 vreg_l11a_1p0: ldo11 {
 300                         regulator-min-microvolt = <1000000>;
 301                         regulator-max-microvolt = <1048000>;
 302                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 303                 };
 304
 305                 vdd_qfprom:
 306                 vdd_qfprom_sp:
 307                 vdda_apc1_cs_1p8:
 308                 vdda_gfx_cs_1p8:
 309                 vdda_qrefs_1p8:
 310                 vdda_qusb_hs0_1p8:
 311                 vddpx_11:
 312                 vreg_l12a_1p8: ldo12 {
 313                         regulator-min-microvolt = <1800000>;
 314                         regulator-max-microvolt = <1800000>;
 315                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 316                 };
 317
 318                 vddpx_2:
 319                 vreg_l13a_2p95: ldo13 {
 320                         regulator-min-microvolt = <1800000>;
 321                         regulator-max-microvolt = <2960000>;
 322                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 323                 };
 324
 325                 vreg_l14a_1p88: ldo14 {
 326                         regulator-min-microvolt = <1800000>;
 327                         regulator-max-microvolt = <1880000>;
 328                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 329                 };
 330
 331                 vreg_l15a_1p8: ldo15 {
 332                         regulator-min-microvolt = <1800000>;
 333                         regulator-max-microvolt = <1800000>;
 334                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 335                 };
 336
 337                 vreg_l17a_1p3: ldo17 {
 338                         regulator-min-microvolt = <1304000>;
 339                         regulator-max-microvolt = <1304000>;
 340                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 341                 };
 342
 343                 vreg_l18a_2p7: ldo18 {
 344                         regulator-min-microvolt = <2704000>;
 345                         regulator-max-microvolt = <2960000>;
 346                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 347                 };
 348
 349                 vreg_l20a_2p95: ldo20 {
 350                         regulator-min-microvolt = <2704000>;
 351                         regulator-max-microvolt = <2960000>;
 352                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 353                 };
 354
 355                 vreg_l21a_2p95: ldo21 {
 356                         regulator-min-microvolt = <2704000>;
 357                         regulator-max-microvolt = <2960000>;
 358                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 359                 };
 360
 361                 vreg_l22a_2p85: ldo22 {
 362                         regulator-min-microvolt = <2800000>;
 363                         regulator-max-microvolt = <2800000>;
 364                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 365                 };
 366
 367                 vreg_l23a_3p3: ldo23 {
 368                         regulator-min-microvolt = <3000000>;
 369                         regulator-max-microvolt = <3312000>;
 370                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 371                 };
 372
 373                 vdda_qusb_hs0_3p1:
 374                 vreg_l24a_3p075: ldo24 {
 375                         regulator-min-microvolt = <3088000>;
 376                         regulator-max-microvolt = <3088000>;
 377                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 378                 };
 379
 380                 vreg_l25a_3p3: ldo25 {
 381                         regulator-min-microvolt = <3000000>;
 382                         regulator-max-microvolt = <3312000>;
 383                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 384                 };
 385
 386                 vdda_hp_pcie_1p2:
 387                 vdda_hv_ebi0:
 388                 vdda_hv_ebi1:
 389                 vdda_hv_ebi2:
 390                 vdda_hv_ebi3:
 391                 vdda_mipi_csi_1p25:
 392                 vdda_mipi_dsi0_1p2:
 393                 vdda_mipi_dsi1_1p2:
 394                 vdda_pcie_1p2:
 395                 vdda_ufs1_1p2:
 396                 vdda_ufs2_1p2:
 397                 vdda_usb1_ss_1p2:
 398                 vdda_usb2_ss_1p2:
 399                 vreg_l26a_1p2: ldo26 {
 400                         regulator-min-microvolt = <1200000>;
 401                         regulator-max-microvolt = <1200000>;
 402                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 403                 };
 404
 405                 vreg_l28a_3p0: ldo28 {
 406                         regulator-min-microvolt = <1800000>;
 407                         regulator-max-microvolt = <1800000>;
 408                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 409                 };
 410
 411                 vreg_lvs1a_1p8: lvs1 {
 412                         regulator-min-microvolt = <1800000>;
 413                         regulator-max-microvolt = <1800000>;
 414                 };
 415
 416                 vreg_lvs2a_1p8: lvs2 {
 417                         regulator-min-microvolt = <1800000>;
 418                         regulator-max-microvolt = <1800000>;
 419                 };
 420         };
 421
 422         regulators-1 {
 423                 compatible = "qcom,pmi8998-rpmh-regulators";
 424                 qcom,pmic-id = "b";
 425
 426                 vdd-bob-supply = <&vph_pwr>;
 427
 428                 vreg_bob: bob {
 429                         regulator-min-microvolt = <3312000>;
 430                         regulator-max-microvolt = <3600000>;
 431                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 432                         regulator-allow-bypass;
 433                 };
 434         };
 435
 436         regulators-2 {
 437                 compatible = "qcom,pm8005-rpmh-regulators";
 438                 qcom,pmic-id = "c";
 439
 440                 vdd-s1-supply = <&vph_pwr>;
 441                 vdd-s2-supply = <&vph_pwr>;
 442                 vdd-s3-supply = <&vph_pwr>;
 443                 vdd-s4-supply = <&vph_pwr>;
 444
 445                 vreg_s3c_0p6: smps3 {
 446                         regulator-min-microvolt = <600000>;
 447                         regulator-max-microvolt = <600000>;
 448                 };
 449         };
 450 };
 451
 452 &cdsp_pas {
 453         status = "okay";
 454 };
 455
 456 &dispcc {
 457         status = "disabled";
 458 };
 459
 460 &gcc {
 461         protected-clocks = <GCC_QSPI_CORE_CLK>,
 462                            <GCC_QSPI_CORE_CLK_SRC>,
 463                            <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
 464                            <GCC_LPASS_Q6_AXI_CLK>,
 465                            <GCC_LPASS_SWAY_CLK>;
 466 };
 467
 468 &gpu {
 469         status = "okay";
 470
 471         zap-shader {
 472                 memory-region = <&gpu_mem>;
 473         };
 474 };
 475
 476 &ipa {
 477         status = "okay";
 478         modem-init;
 479 };
 480
 481 &mss_pil {
 482         status = "okay";
 483 };
 484
 485 &pm8998_pon {
 486         resin {
 487                 compatible = "qcom,pm8941-resin";
 488                 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
 489                 debounce = <15625>;
 490                 bias-pull-up;
 491                 linux,code = <KEY_VOLUMEDOWN>;
 492         };
 493 };
 494
 495 &sdhc_2 {
 496         status = "okay";
 497
 498         cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
 499
 500         pinctrl-names = "default";
 501         pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
 502
 503         vmmc-supply = <&vreg_l21a_2p95>;
 504         vqmmc-supply = <&vddpx_2>;
 505 };
 506
 507 /*
 508  * UFS works partially and only with clk_ignore_unused.
 509  * Sometimes it crashes with I/O errors.
 510  */
 511 &ufs_mem_hc {
 512         status = "okay";
 513
 514         reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
 515
 516         vcc-supply = <&vreg_l20a_2p95>;
 517         vcc-max-microamp = <600000>;
 518 };
 519
 520 &ufs_mem_phy {
 521         status = "okay";
 522
 523         vdda-phy-supply = <&vdda_ufs1_core>;
 524         vdda-pll-supply = <&vdda_ufs1_1p2>;
 525 };
 526
 527 &usb_1 {
 528         status = "okay";
 529 };
 530
 531 &usb_1_dwc3 {
 532         /* TODO: these devices have usb id pin */
 533         dr_mode = "peripheral";
 534 };
 535
 536 &usb_1_hsphy {
 537         status = "okay";
 538
 539         vdd-supply = <&vdda_usb1_ss_core>;
 540         vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
 541         vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
 542
 543         qcom,imp-res-offset-value = <8>;
 544         qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
 545         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
 546         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 547 };
 548
 549 &usb_1_qmpphy {
 550         status = "okay";
 551
 552         vdda-phy-supply = <&vdda_usb1_ss_1p2>;
 553         vdda-pll-supply = <&vdda_usb1_ss_core>;
 554 };
 555
 556 /* PINCTRL - additions to nodes defined in sdm845.dtsi */
 557
 558 &tlmm {
 559         gpio-reserved-ranges = <28 4>, <81 4>;
 560
 561         sdc2_clk: sdc2-clk {
 562                 pinconf {
 563                         pins = "sdc2_clk";
 564                         bias-disable;
 565
 566                         /*
 567                          * It seems that mmc_test reports errors if drive
 568                          * strength is not 16 on clk, cmd, and data pins.
 569                          *
 570                          * TODO: copy-pasted from mtp, try other values
 571                          * on these devices.
 572                          */
 573                         drive-strength = <16>;
 574                 };
 575         };
 576
 577         sdc2_cmd: sdc2-cmd {
 578                 pinconf {
 579                         pins = "sdc2_cmd";
 580                         bias-pull-up;
 581                         drive-strength = <16>;
 582                 };
 583         };
 584
 585         sdc2_data: sdc2-data {
 586                 pinconf {
 587                         pins = "sdc2_data";
 588                         bias-pull-up;
 589                         drive-strength = <16>;
 590                 };
 591         };
 592
 593         sd_card_det_n: sd-card-det-n {
 594                 pinmux {
 595                         pins = "gpio126";
 596                         function = "gpio";
 597                 };
 598
 599                 pinconf {
 600                         pins = "gpio126";
 601                         bias-pull-up;
 602                 };
 603         };
 604 };
 605
 606 &pm8998_gpio {
 607         vol_up_pin_a: vol-up-active-pins {
 608                 pins = "gpio6";
 609                 function = "normal";
 610                 input-enable;
 611                 bias-pull-up;
 612                 qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 613         };
 614 };