arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Gabriela David
   4  */
   5 /dts-v1/;
   6
   7 #include "sdm632.dtsi"
   8 #include "pm8953.dtsi"
   9 #include <dt-bindings/leds/common.h>
  10
  11 /delete-node/ &cont_splash_mem;
  12 /delete-node/ &qseecom_mem;
  13
  14 / {
  15         model = "Motorola G7 Power";
  16         compatible = "motorola,ocean", "qcom,sdm632";
  17         chassis-type = "handset";
  18         qcom,msm-id = <349 0>;
  19         qcom,board-id = <0x141 0xc100>;
  20         qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
  21
  22         backlight: backlight {
  23                 compatible = "led-backlight";
  24                 leds = <&led>;
  25         };
  26
  27         chosen {
  28                 #address-cells = <2>;
  29                 #size-cells = <2>;
  30                 ranges;
  31
  32                 framebuffer@90001000 {
  33                         compatible = "simple-framebuffer";
  34                         reg = <0 0x90001000 0 (720 * 1520 * 3)>;
  35
  36                         width = <720>;
  37                         height = <1520>;
  38                         stride = <(720 * 3)>;
  39                         format = "r8g8b8";
  40
  41                         power-domains = <&gcc MDSS_GDSC>;
  42
  43                         clocks = <&gcc GCC_MDSS_AHB_CLK>,
  44                                  <&gcc GCC_MDSS_AXI_CLK>,
  45                                  <&gcc GCC_MDSS_VSYNC_CLK>,
  46                                  <&gcc GCC_MDSS_MDP_CLK>,
  47                                  <&gcc GCC_MDSS_BYTE0_CLK>,
  48                                  <&gcc GCC_MDSS_PCLK0_CLK>,
  49                                  <&gcc GCC_MDSS_ESC0_CLK>;
  50                 };
  51         };
  52
  53         gpio-keys {
  54                 compatible = "gpio-keys";
  55
  56                 pinctrl-names = "default";
  57                 pinctrl-0 = <&gpio_key_default>;
  58
  59                 key-volume-up {
  60                         label = "Volume Up";
  61                         gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_VOLUMEUP>;
  63                 };
  64         };
  65
  66         reserved-memory {
  67                 qseecom_mem: qseecom@84300000 {
  68                         reg = <0x0 0x84300000 0x0 0x2000000>;
  69                         no-map;
  70                 };
  71
  72                 cont_splash_mem: cont-splash@90001000 {
  73                         reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
  74                         no-map;
  75                 };
  76
  77                 reserved@eefa1800 {
  78                         reg = <0x00 0xeefa1800 0x00 0x5e800>;
  79                         no-map;
  80                 };
  81
  82                 ramoops@ef000000 {
  83                         compatible = "ramoops";
  84                         reg = <0x0 0xef000000 0x0 0xbf800>;
  85                         console-size = <0x40000>;
  86                         pmsg-size = <0x40000>;
  87                         record-size = <0x3f800>;
  88                 };
  89         };
  90
  91         vph_pwr: vph-pwr-regulator {
  92                 compatible = "regulator-fixed";
  93                 regulator-name = "vph_pwr";
  94                 regulator-always-on;
  95                 regulator-boot-on;
  96         };
  97 };
  98
  99 &hsusb_phy {
 100         vdd-supply = <&pm8953_l3>;
 101         vdda-pll-supply = <&pm8953_l7>;
 102         vdda-phy-dpdm-supply = <&pm8953_l13>;
 103
 104         status = "okay";
 105 };
 106
 107 &i2c_3 {
 108         status = "okay";
 109
 110         touchscreen@41 {
 111                 compatible = "ilitek,ili2117";
 112                 reg = <0x41>;
 113
 114                 interrupt-parent = <&tlmm>;
 115                 interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
 116
 117                 touchscreen-inverted-x;
 118         };
 119 };
 120
 121 &i2c_5 {
 122         status = "okay";
 123
 124         led-controller@36 {
 125                 compatible = "ti,lm3697";
 126                 reg = <0x36>;
 127
 128                 #address-cells = <1>;
 129                 #size-cells = <0>;
 130
 131                 led: led@1 {
 132                         reg = <1>;
 133                         default-trigger = "backlight";
 134                         function = LED_FUNCTION_BACKLIGHT;
 135                         led-sources = <0 1 2>;
 136                 };
 137         };
 138 };
 139
 140 &pm8953_resin {
 141         linux,code = <KEY_VOLUMEDOWN>;
 142         status = "okay";
 143 };
 144
 145 &rpm_requests {
 146         regulators {
 147                 compatible = "qcom,rpm-pm8953-regulators";
 148
 149                 vdd_l1-supply = <&pm8953_s3>;
 150                 vdd_l2_l3-supply = <&pm8953_s3>;
 151                 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
 152                 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
 153                 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
 154
 155                 pm8953_s3: s3 {
 156                         regulator-min-microvolt = <984000>;
 157                         regulator-max-microvolt = <1240000>;
 158                 };
 159
 160                 pm8953_s4: s4 {
 161                         regulator-min-microvolt = <1036000>;
 162                         regulator-max-microvolt = <2040000>;
 163                 };
 164
 165                 pm8953_l1: l1 {
 166                         regulator-min-microvolt = <975000>;
 167                         regulator-max-microvolt = <1050000>;
 168                 };
 169
 170                 pm8953_l2: l2 {
 171                         regulator-min-microvolt = <975000>;
 172                         regulator-max-microvolt = <1175000>;
 173                 };
 174
 175                 pm8953_l3: l3 {
 176                         regulator-min-microvolt = <925000>;
 177                         regulator-max-microvolt = <925000>;
 178                         regulator-allow-set-load;
 179                 };
 180
 181                 pm8953_l5: l5 {
 182                         regulator-min-microvolt = <1800000>;
 183                         regulator-max-microvolt = <1800000>;
 184                 };
 185
 186                 pm8953_l6: l6 {
 187                         regulator-min-microvolt = <1800000>;
 188                         regulator-max-microvolt = <1800000>;
 189                         regulator-always-on;
 190                         regulator-boot-on;
 191                 };
 192
 193                 pm8953_l7: l7 {
 194                         regulator-min-microvolt = <1800000>;
 195                         regulator-max-microvolt = <1900000>;
 196                 };
 197
 198                 pm8953_l8: l8 {
 199                         regulator-min-microvolt = <2900000>;
 200                         regulator-max-microvolt = <2900000>;
 201                 };
 202
 203                 pm8953_l9: l9 {
 204                         regulator-min-microvolt = <3000000>;
 205                         regulator-max-microvolt = <3300000>;
 206                 };
 207
 208                 pm8953_l10: l10 {
 209                         regulator-min-microvolt = <2800000>;
 210                         regulator-max-microvolt = <3000000>;
 211                 };
 212
 213                 pm8953_l11: l11 {
 214                         regulator-min-microvolt = <2950000>;
 215                         regulator-max-microvolt = <2950000>;
 216                 };
 217
 218                 pm8953_l12: l12 {
 219                         regulator-min-microvolt = <1800000>;
 220                         regulator-max-microvolt = <2950000>;
 221                 };
 222
 223                 pm8953_l13: l13 {
 224                         regulator-min-microvolt = <3125000>;
 225                         regulator-max-microvolt = <3125000>;
 226                 };
 227
 228                 pm8953_l16: l16 {
 229                         regulator-min-microvolt = <1800000>;
 230                         regulator-max-microvolt = <1800000>;
 231                 };
 232
 233                 pm8953_l17: l17 {
 234                         regulator-min-microvolt = <2850000>;
 235                         regulator-max-microvolt = <2850000>;
 236                 };
 237
 238                 pm8953_l18: l18 {
 239                         regulator-min-microvolt = <1800000>;
 240                         regulator-max-microvolt = <2700000>;
 241                         regulator-always-on;
 242                         regulator-boot-on;
 243                 };
 244
 245                 pm8953_l19: l19 {
 246                         regulator-min-microvolt = <1200000>;
 247                         regulator-max-microvolt = <1350000>;
 248                 };
 249
 250                 pm8953_l22: l22 {
 251                         regulator-min-microvolt = <1800000>;
 252                         regulator-max-microvolt = <1800000>;
 253                         regulator-always-on;
 254                 };
 255
 256                 pm8953_l23: l23 {
 257                         regulator-min-microvolt = <975000>;
 258                         regulator-max-microvolt = <1225000>;
 259                 };
 260         };
 261 };
 262
 263 &sdhc_1 {
 264         vmmc-supply = <&pm8953_l8>;
 265         vqmmc-supply = <&pm8953_l5>;
 266
 267         status = "okay";
 268 };
 269
 270 &sdhc_2 {
 271         vmmc-supply = <&pm8953_l11>;
 272         vqmmc-supply = <&pm8953_l12>;
 273
 274         pinctrl-names = "default", "sleep";
 275         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 276         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 277
 278         status = "okay";
 279 };
 280
 281 &tlmm {
 282         gpio-reserved-ranges = <96 4>;
 283 };
 284
 285 &usb3 {
 286         status = "okay";
 287 };
 288
 289 &usb3_dwc3 {
 290         dr_mode = "peripheral";
 291 };