arch/arm64/boot/dts/qcom/sc8180x-primus.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2020-2023, Linaro Limited
   5  */
   6
   7 /dts-v1/;
   8
   9 #include <dt-bindings/firmware/qcom,scm.h>
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/input/gpio-keys.h>
  12 #include <dt-bindings/input/input.h>
  13 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
  14 #include "sc8180x.dtsi"
  15 #include "sc8180x-pmics.dtsi"
  16
  17 / {
  18         model = "Qualcomm SC8180x Primus";
  19         compatible = "qcom,sc8180x-primus", "qcom,sc8180x";
  20
  21         aliases {
  22                 serial0 = &uart12;
  23                 serial1 = &uart13;
  24         };
  25
  26         backlight: backlight {
  27                 compatible = "pwm-backlight";
  28                 pwms = <&pmc8180c_lpg 4 1000000>;
  29                 enable-gpios = <&pmc8180c_gpios 8 GPIO_ACTIVE_HIGH>;
  30
  31                 pinctrl-names = "default";
  32                 pinctrl-0 = <&bl_pwm_default>;
  33         };
  34
  35         chosen {
  36                 stdout-path = "serial0:115200n8";
  37         };
  38
  39         gpio-keys {
  40                 compatible = "gpio-keys";
  41
  42                 pinctrl-names = "default";
  43                 pinctrl-0 = <&hall_int_active_state>;
  44
  45                 lid-switch {
  46                         gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>;
  47                         linux,input-type = <EV_SW>;
  48                         linux,code = <SW_LID>;
  49                         wakeup-source;
  50                         wakeup-event-action = <EV_ACT_DEASSERTED>;
  51                 };
  52         };
  53
  54         pmic-glink {
  55                 compatible = "qcom,sc8180x-pmic-glink", "qcom,pmic-glink";
  56
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59
  60                 connector@0 {
  61                         compatible = "usb-c-connector";
  62                         reg = <0>;
  63                         power-role = "dual";
  64                         data-role = "dual";
  65
  66                         ports {
  67                                 #address-cells = <1>;
  68                                 #size-cells = <0>;
  69
  70                                 port@0 {
  71                                         reg = <0>;
  72
  73                                         pmic_glink_con0_hs: endpoint {
  74                                                 remote-endpoint = <&usb_prim_role_switch>;
  75                                         };
  76                                 };
  77
  78                                 port@1 {
  79                                         reg = <1>;
  80
  81                                         pmic_glink_con0_ss: endpoint {
  82                                                 remote-endpoint = <&usb_prim_qmpphy_out>;
  83                                         };
  84                                 };
  85
  86                                 port@2 {
  87                                         reg = <2>;
  88
  89                                         pmic_glink_con0_sbu: endpoint {
  90                                                 remote-endpoint = <&usbprim_sbu_mux>;
  91                                         };
  92                                 };
  93                         };
  94                 };
  95
  96                 connector@1 {
  97                         compatible = "usb-c-connector";
  98                         reg = <1>;
  99                         power-role = "dual";
 100                         data-role = "dual";
 101
 102                         ports {
 103                                 #address-cells = <1>;
 104                                 #size-cells = <0>;
 105                                 port@0 {
 106                                         reg = <0>;
 107
 108                                         pmic_glink_con1_hs: endpoint {
 109                                                 remote-endpoint = <&usb_sec_role_switch>;
 110                                         };
 111                                 };
 112
 113                                 port@1 {
 114                                         reg = <1>;
 115
 116                                         pmic_glink_con1_ss: endpoint {
 117                                                 remote-endpoint = <&usb_sec_qmpphy_out>;
 118                                         };
 119                                 };
 120
 121                                 port@2 {
 122                                         reg = <2>;
 123
 124                                         pmic_glink_con1_sbu: endpoint {
 125                                                 remote-endpoint = <&usbsec_sbu_mux>;
 126                                         };
 127                                 };
 128                         };
 129                 };
 130         };
 131
 132         reserved-memory {
 133                 rmtfs_mem: rmtfs-region@85500000 {
 134                         compatible = "qcom,rmtfs-mem";
 135                         reg = <0x0 0x85500000 0x0 0x200000>;
 136                         no-map;
 137
 138                         qcom,client-id = <1>;
 139                         qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
 140                 };
 141
 142                 wlan_mem: wlan-region@8bc00000 {
 143                         reg = <0x0 0x8bc00000 0x0 0x180000>;
 144                         no-map;
 145                 };
 146
 147                 adsp_mem: adsp-region@96e00000 {
 148                         reg = <0x0 0x96e00000 0x0 0x1c00000>;
 149                         no-map;
 150                 };
 151
 152                 mpss_mem: mpss-region@8d800000 {
 153                         reg = <0x0 0x8d800000 0x0 0x9600000>;
 154                         no-map;
 155                 };
 156
 157                 gpu_mem: gpu-region@98a00000 {
 158                         reg = <0x0 0x98a00000 0x0 0x2000>;
 159                         no-map;
 160                 };
 161
 162                 reserved-region@9a500000 {
 163                         reg = <0x0 0x9a500000 0x0 0x600000>;
 164                         no-map;
 165                 };
 166         };
 167
 168         vreg_nvme_0p9: nvme-0p9-regulator {
 169                 compatible = "regulator-fixed";
 170                 regulator-name = "vreg_nvme_0p9";
 171
 172                 regulator-min-microvolt = <900000>;
 173                 regulator-max-microvolt = <900000>;
 174
 175                 regulator-always-on;
 176         };
 177
 178         vreg_nvme_3p3: nvme-3p3-regulator {
 179                 compatible = "regulator-fixed";
 180                 regulator-name = "vreg_nvme_3p3";
 181
 182                 regulator-min-microvolt = <3300000>;
 183                 regulator-max-microvolt = <3300000>;
 184
 185                 gpio = <&pmc8180c_gpios 11 0>;
 186                 enable-active-high;
 187
 188                 regulator-always-on;
 189         };
 190
 191         vdd_kb_tp_3v3: vdd-kb-tp-3v3-regulator {
 192                 compatible = "regulator-fixed";
 193                 regulator-name = "vdd_kb_tp_3v3";
 194                 regulator-min-microvolt = <3300000>;
 195                 regulator-max-microvolt = <3300000>;
 196
 197                 gpio = <&tlmm 4 GPIO_ACTIVE_HIGH>;
 198                 enable-active-high;
 199
 200                 regulator-always-on;
 201
 202                 pinctrl-names = "default";
 203                 pinctrl-0 = <&kb_tp_3v3_en_active_state>;
 204         };
 205
 206         vph_pwr: vph-pwr-regulator {
 207                 compatible = "regulator-fixed";
 208                 regulator-name = "vph_pwr";
 209                 regulator-min-microvolt = <3700000>;
 210                 regulator-max-microvolt = <3700000>;
 211         };
 212
 213         vreg_s4a_1p8: pm8150-s4 {
 214                 compatible = "regulator-fixed";
 215                 regulator-name = "vreg_s4a_1p8";
 216
 217                 regulator-min-microvolt = <1800000>;
 218                 regulator-max-microvolt = <1800000>;
 219
 220                 regulator-always-on;
 221                 regulator-boot-on;
 222
 223                 vin-supply = <&vph_pwr>;
 224         };
 225
 226         usbprim-sbu-mux {
 227                 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
 228
 229                 enable-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 230                 select-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
 231
 232                 pinctrl-names = "default";
 233                 pinctrl-0 = <&usbprim_sbu_default>;
 234
 235                 mode-switch;
 236                 orientation-switch;
 237
 238                 port {
 239                         usbprim_sbu_mux: endpoint {
 240                                 remote-endpoint = <&pmic_glink_con0_sbu>;
 241                         };
 242                 };
 243         };
 244
 245         usbsec-sbu-mux {
 246                 compatible = "pericom,pi3usb102", "gpio-sbu-mux";
 247
 248                 enable-gpios = <&tlmm 188 GPIO_ACTIVE_LOW>;
 249                 select-gpios = <&tlmm 187 GPIO_ACTIVE_HIGH>;
 250
 251                 pinctrl-names = "default";
 252                 pinctrl-0 = <&usbsec_sbu_default>;
 253
 254                 mode-switch;
 255                 orientation-switch;
 256
 257                 port {
 258                         usbsec_sbu_mux: endpoint {
 259                                 remote-endpoint = <&pmic_glink_con1_sbu>;
 260                         };
 261                 };
 262         };
 263 };
 264
 265 &apps_rsc {
 266         regulators-0 {
 267                 compatible = "qcom,pmc8180-rpmh-regulators";
 268                 qcom,pmic-id = "a";
 269
 270                 vdd-s5-supply = <&vph_pwr>;
 271                 vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
 272
 273                 vreg_s5a_2p0: smps5 {
 274                         regulator-min-microvolt = <2040000>;
 275                         regulator-max-microvolt = <2100000>;
 276                 };
 277
 278                 vreg_l7a_1p8: ldo7 {
 279                         regulator-min-microvolt = <1800000>;
 280                         regulator-max-microvolt = <1800000>;
 281                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 282                 };
 283
 284                 vreg_l9a_1p3: ldo9 {
 285                         regulator-min-microvolt = <1296000>;
 286                         regulator-max-microvolt = <1304000>;
 287                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 288                 };
 289
 290                 vreg_l12a_1p8: ldo12 {
 291                         regulator-min-microvolt = <1800000>;
 292                         regulator-max-microvolt = <1800000>;
 293                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 294                 };
 295         };
 296
 297         regulators-1 {
 298                 compatible = "qcom,pmc8180c-rpmh-regulators";
 299                 qcom,pmic-id = "c";
 300
 301                 vdd-s6-supply = <&vph_pwr>;
 302                 vdd-s8-supply = <&vph_pwr>;
 303                 vdd-l2-l3-supply = <&vreg_s6c_1p35>;
 304                 vdd-bob-supply = <&vph_pwr>;
 305
 306                 vreg_s6c_1p35: smps6 {
 307                         regulator-min-microvolt = <1350000>;
 308                         regulator-max-microvolt = <1372000>;
 309                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 310                 };
 311
 312                 vreg_s8c_1p8: smps8 {
 313                         regulator-min-microvolt = <1800000>;
 314                         regulator-max-microvolt = <1800000>;
 315                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 316                         regulator-always-on;
 317                 };
 318
 319                 vreg_l3c_1p2: ldo3 {
 320                         regulator-min-microvolt = <1200000>;
 321                         regulator-max-microvolt = <1200000>;
 322                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 323                 };
 324
 325                 vreg_l4c_3p3: ldo4 {
 326                         regulator-min-microvolt = <3008000>;
 327                         regulator-max-microvolt = <3008000>;
 328                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 329                 };
 330
 331                 vreg_l10c_3p3: ldo10 {
 332                         regulator-min-microvolt = <3000000>;
 333                         regulator-max-microvolt = <3312000>;
 334                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 335                 };
 336
 337                 vreg_l11c_3p3: ldo11 {
 338                         regulator-min-microvolt = <3296000>;
 339                         regulator-max-microvolt = <3304000>;
 340                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 341                 };
 342
 343                 vreg_bob: bob {
 344                         regulator-min-microvolt = <3296000>;
 345                         regulator-max-microvolt = <3350000>;
 346                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 347                 };
 348         };
 349
 350         regulators-2 {
 351                 compatible = "qcom,pmc8180-rpmh-regulators";
 352                 qcom,pmic-id = "e";
 353
 354                 vdd-s4-supply = <&vph_pwr>;
 355                 vdd-s5-supply = <&vph_pwr>;
 356                 vdd-l2-l10-supply = <&vreg_bob>;
 357                 vdd-l3-l4-l5-l18-supply = <&vreg_s4e_0p98>;
 358                 vdd-l7-l12-l14-l15-supply = <&vreg_s5e_2p05>;
 359                 vdd-l13-l16-l17-supply = <&vreg_bob>;
 360
 361                 vreg_s4e_0p98: smps4 {
 362                         regulator-min-microvolt = <992000>;
 363                         regulator-max-microvolt = <992000>;
 364                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 365                 };
 366
 367                 vreg_s5e_2p05: smps5 {
 368                         regulator-min-microvolt = <2040000>;
 369                         regulator-max-microvolt = <2040000>;
 370                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 371                 };
 372
 373                 vreg_l1e_0p75: ldo1 {
 374                         regulator-min-microvolt = <752000>;
 375                         regulator-max-microvolt = <752000>;
 376                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 377                 };
 378
 379                 vreg_l5e_0p88: ldo5 {
 380                         regulator-min-microvolt = <880000>;
 381                         regulator-max-microvolt = <880000>;
 382                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 383                 };
 384
 385                 vreg_l7e_1p8: ldo7 {
 386                         regulator-min-microvolt = <1800000>;
 387                         regulator-max-microvolt = <1800000>;
 388                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 389                 };
 390
 391                 vreg_l10e_2p9: ldo10 {
 392                         regulator-min-microvolt = <2904000>;
 393                         regulator-max-microvolt = <2904000>;
 394                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 395                 };
 396
 397                 vreg_l12e: ldo12 {
 398                         regulator-min-microvolt = <1800000>;
 399                         regulator-max-microvolt = <1800000>;
 400                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 401                 };
 402
 403                 vreg_l16e_3p0: ldo16 {
 404                         regulator-min-microvolt = <3072000>;
 405                         regulator-max-microvolt = <3072000>;
 406                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 407                 };
 408         };
 409 };
 410
 411 &gpu {
 412         status = "okay";
 413
 414         zap-shader {
 415                 memory-region = <&gpu_mem>;
 416                 firmware-name = "/*(DEBLOBBED)*/";
 417         };
 418 };
 419
 420 &i2c1 {
 421         clock-frequency = <100000>;
 422
 423         pinctrl-names = "default";
 424         pinctrl-0 = <&ts_i2c_active_state>;
 425
 426         status = "okay";
 427
 428         touchscreen@10 {
 429                 compatible = "hid-over-i2c";
 430                 reg = <0x10>;
 431                 hid-descr-addr = <0x1>;
 432
 433                 vdd-supply = <&vreg_l4c_3p3>;
 434                 vddl-supply = <&vreg_l12e>;
 435
 436                 post-power-on-delay-ms = <20>;
 437
 438                 interrupts-extended = <&tlmm 122 IRQ_TYPE_LEVEL_LOW>;
 439
 440                 pinctrl-names = "default";
 441                 pinctrl-0 = <&ts_active_state>;
 442         };
 443 };
 444
 445 &i2c7 {
 446         clock-frequency = <100000>;
 447
 448         pinctrl-names = "default";
 449         pinctrl-0 = <&aux_i2c_active_state>;
 450
 451         status = "okay";
 452
 453         touchpad@15 {
 454                 compatible = "hid-over-i2c";
 455                 reg = <0x15>;
 456                 hid-descr-addr = <0x1>;
 457
 458                 interrupts-extended = <&tlmm 24 IRQ_TYPE_LEVEL_LOW>;
 459
 460                 pinctrl-names = "default";
 461                 pinctrl-0 = <&tp_int_active_state>;
 462
 463                 vdd-supply = <&vdd_kb_tp_3v3>;
 464         };
 465
 466         keyboard@3a {
 467                 compatible = "hid-over-i2c";
 468                 reg = <0x3a>;
 469                 hid-descr-addr = <0x1>;
 470                 interrupts-extended = <&tlmm 37 IRQ_TYPE_LEVEL_LOW>;
 471
 472                 pinctrl-names = "default";
 473                 pinctrl-0 = <&kb_int_active_state>;
 474
 475                 vdd-supply = <&vdd_kb_tp_3v3>;
 476         };
 477 };
 478
 479 &mdss {
 480         status = "okay";
 481 };
 482
 483 &mdss_dp0 {
 484         status = "okay";
 485 };
 486
 487 &mdss_dp0_out {
 488         data-lanes = <0 1>;
 489         remote-endpoint = <&usb_prim_qmpphy_dp_in>;
 490 };
 491
 492 &mdss_dp1 {
 493         status = "okay";
 494 };
 495
 496 &mdss_dp1_out {
 497         data-lanes = <0 1>;
 498         remote-endpoint = <&usb_sec_qmpphy_dp_in>;
 499 };
 500
 501 &mdss_edp {
 502         data-lanes = <0 1 2 3>;
 503
 504         pinctrl-names = "default";
 505         pinctrl-0 = <&edp_hpd_active>;
 506
 507         status = "okay";
 508
 509         aux-bus {
 510                 panel {
 511                         compatible = "edp-panel";
 512
 513                         backlight = <&backlight>;
 514
 515                         port {
 516                                 auo_b133han05_in: endpoint {
 517                                         remote-endpoint = <&mdss_edp_out>;
 518                                 };
 519                         };
 520                 };
 521         };
 522
 523         ports {
 524                 port@1 {
 525                         reg = <1>;
 526                         mdss_edp_out: endpoint {
 527                                 remote-endpoint = <&auo_b133han05_in>;
 528                         };
 529                 };
 530         };
 531 };
 532
 533 &pcie1 {
 534         perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>;
 535         wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>;
 536         pinctrl-names = "default";
 537         pinctrl-0 = <&pcie2_default_state>;
 538
 539         status = "okay";
 540 };
 541
 542 &pcie1_phy {
 543         vdda-phy-supply = <&vreg_l5e_0p88>;
 544         vdda-pll-supply = <&vreg_l3c_1p2>;
 545
 546         status = "okay";
 547 };
 548
 549 &pmc8180c_lpg {
 550         status = "okay";
 551 };
 552
 553 &qupv3_id_0 {
 554         status = "okay";
 555 };
 556
 557 &qupv3_id_1 {
 558         status = "okay";
 559 };
 560
 561 &qupv3_id_2 {
 562         status = "okay";
 563 };
 564
 565 &remoteproc_adsp {
 566         memory-region = <&adsp_mem>;
 567         firmware-name = "/*(DEBLOBBED)*/";
 568
 569         status = "okay";
 570 };
 571
 572 &remoteproc_mpss {
 573         memory-region = <&mpss_mem>;
 574         firmware-name = "/*(DEBLOBBED)*/";
 575
 576         status = "okay";
 577 };
 578
 579 &uart12 {
 580         compatible = "qcom,geni-debug-uart";
 581         status = "okay";
 582 };
 583
 584 &uart13 {
 585         pinctrl-names = "default";
 586         pinctrl-0 = <&uart13_state>;
 587
 588         status = "okay";
 589
 590         bluetooth {
 591                 compatible = "qcom,wcn3998-bt";
 592
 593                 vddio-supply = <&vreg_s4a_1p8>;
 594                 vddxo-supply = <&vreg_l7a_1p8>;
 595                 vddrf-supply = <&vreg_l9a_1p3>;
 596                 vddch0-supply = <&vreg_l11c_3p3>;
 597                 max-speed = <3200000>;
 598         };
 599 };
 600
 601 &ufs_mem_hc {
 602         reset-gpios = <&tlmm 190 GPIO_ACTIVE_LOW>;
 603
 604         vcc-supply = <&vreg_l10e_2p9>;
 605         vcc-max-microamp = <155000>;
 606
 607         vccq2-supply = <&vreg_l7e_1p8>;
 608         vccq2-max-microamp = <425000>;
 609
 610         status = "okay";
 611 };
 612
 613 &ufs_mem_phy {
 614         vdda-phy-supply = <&vreg_l5e_0p88>;
 615         vdda-pll-supply = <&vreg_l3c_1p2>;
 616
 617         status = "okay";
 618 };
 619
 620 &usb_prim_hsphy {
 621         vdda-pll-supply = <&vreg_l5e_0p88>;
 622         vdda18-supply = <&vreg_l12a_1p8>;
 623         vdda33-supply = <&vreg_l16e_3p0>;
 624
 625         status = "okay";
 626 };
 627
 628 &usb_prim_qmpphy {
 629         vdda-phy-supply = <&vreg_l3c_1p2>;
 630         vdda-pll-supply = <&vreg_l5e_0p88>;
 631
 632         orientation-switch;
 633
 634         status = "okay";
 635 };
 636
 637 &usb_prim {
 638         status = "okay";
 639 };
 640
 641 &usb_prim_dwc3 {
 642         dr_mode = "host";
 643 };
 644
 645 &usb_prim_qmpphy_dp_in {
 646         remote-endpoint = <&mdss_dp0_out>;
 647 };
 648
 649 &usb_prim_qmpphy_out {
 650         remote-endpoint = <&pmic_glink_con0_ss>;
 651 };
 652
 653 &usb_prim_role_switch {
 654         remote-endpoint = <&pmic_glink_con0_hs>;
 655 };
 656
 657 &usb_sec_hsphy {
 658         vdda-pll-supply = <&vreg_l5e_0p88>;
 659         vdda18-supply = <&vreg_l12a_1p8>;
 660         vdda33-supply = <&vreg_l16e_3p0>;
 661
 662         status = "okay";
 663 };
 664
 665 &usb_sec_qmpphy {
 666         vdda-phy-supply = <&vreg_l3c_1p2>;
 667         vdda-pll-supply = <&vreg_l5e_0p88>;
 668
 669         orientation-switch;
 670
 671         status = "okay";
 672 };
 673
 674 &usb_sec_qmpphy_dp_in {
 675         remote-endpoint = <&mdss_dp1_out>;
 676 };
 677
 678 &usb_sec_qmpphy_out {
 679         remote-endpoint = <&pmic_glink_con1_ss>;
 680 };
 681
 682 &usb_sec_role_switch {
 683         remote-endpoint = <&pmic_glink_con1_hs>;
 684 };
 685
 686 &usb_sec {
 687         status = "okay";
 688 };
 689
 690 &usb_sec_dwc3 {
 691         dr_mode = "host";
 692 };
 693
 694 &wifi {
 695         memory-region = <&wlan_mem>;
 696
 697         vdd-0.8-cx-mx-supply = <&vreg_l1e_0p75>;
 698         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 699         vdd-1.3-rfa-supply = <&vreg_l9a_1p3>;
 700         vdd-3.3-ch0-supply = <&vreg_l11c_3p3>;
 701         vdd-3.3-ch1-supply = <&vreg_l10c_3p3>;
 702
 703         status = "okay";
 704 };
 705
 706 &xo_board_clk {
 707         clock-frequency = <38400000>;
 708 };
 709
 710 /* PINCTRL */
 711
 712 &pmc8180c_gpios {
 713         bl_pwm_default: bl-pwm-default-state {
 714                 en-pins {
 715                         pins = "gpio8";
 716                         function = "normal";
 717                 };
 718
 719                 pwm-pins {
 720                         pins = "gpio10";
 721                         function = "func1";
 722                 };
 723         };
 724 };
 725
 726 &tlmm {
 727         gpio-reserved-ranges = <0 4>, <47 4>, <126 4>;
 728
 729         aux_i2c_active_state: aux-i2c-active-state {
 730                 pins = "gpio98", "gpio99";
 731                 function = "qup7";
 732
 733                 bias-disable;
 734                 drive-strength = <16>;
 735         };
 736
 737         edp_hpd_active: epd-hpd-active-state {
 738                 pins = "gpio10";
 739                 function = "edp_hot";
 740         };
 741
 742         hall_int_active_state: hall-int-active-state {
 743                 pins = "gpio121";
 744                 function = "gpio";
 745
 746                 bias-disable;
 747         };
 748
 749         kb_int_active_state: kb-int-active-state {
 750                 int-n-pins {
 751                         pins = "gpio37";
 752                         function = "gpio";
 753
 754                         bias-pull-up;
 755                 };
 756
 757                 kp-disable-pins {
 758                         pins = "gpio135";
 759                         function = "gpio";
 760
 761                         output-high;
 762                 };
 763         };
 764
 765         kb_tp_3v3_en_active_state: kb-tp-3v3-en-active-state {
 766                 pins = "gpio4";
 767                 function = "gpio";
 768
 769                 bias-disable;
 770         };
 771
 772         pcie2_default_state: pcie2-default-state {
 773                 clkreq-pins {
 774                         pins = "gpio176";
 775                         function = "pci_e2";
 776                         bias-pull-up;
 777                 };
 778
 779                 reset-n-pins {
 780                         pins = "gpio175";
 781                         function = "gpio";
 782
 783                         drive-strength = <2>;
 784                         output-low;
 785                         bias-pull-down;
 786                 };
 787
 788                 wake-n-pins {
 789                         pins = "gpio177";
 790                         function = "gpio";
 791
 792                         drive-strength = <2>;
 793                         bias-pull-up;
 794                 };
 795         };
 796
 797         usbprim_sbu_default: usbprim-sbu-state {
 798                 oe-n-pins {
 799                         pins = "gpio152";
 800                         function = "gpio";
 801                         bias-disable;
 802                         drive-strength = <16>;
 803                         output-high;
 804                 };
 805
 806                 sel-pins {
 807                         pins = "gpio100";
 808                         function = "gpio";
 809                         bias-disable;
 810                         drive-strength = <16>;
 811                 };
 812         };
 813
 814         usbsec_sbu_default: usbsec-sbu-state {
 815                 oe-n-pins {
 816                         pins = "gpio188";
 817                         function = "gpio";
 818                         bias-disable;
 819                         drive-strength = <16>;
 820                         output-high;
 821                 };
 822
 823                 sel-pins {
 824                         pins = "gpio187";
 825                         function = "gpio";
 826                         bias-disable;
 827                         drive-strength = <16>;
 828                 };
 829         };
 830
 831         tp_int_active_state: tp-int-active-state {
 832                 tp-int-pins {
 833                         pins = "gpio24";
 834                         function = "gpio";
 835
 836                         bias-disable;
 837                 };
 838
 839                 tp-close-n-pins {
 840                         pins = "gpio116";
 841                         function = "gpio";
 842
 843                         bias-disable;
 844                 };
 845         };
 846
 847         ts_active_state: ts-active-state {
 848                 int-n-pins {
 849                         pins = "gpio122";
 850                         function = "gpio";
 851
 852                         bias-disable;
 853                 };
 854
 855                 reset-n-pins {
 856                         pins = "gpio54";
 857                         function = "gpio";
 858
 859                         output-high;
 860                 };
 861         };
 862
 863         ts_i2c_active_state: ts-i2c-active-state {
 864                 pins = "gpio114", "gpio115";
 865                 function = "qup1";
 866
 867                 /* External pull up */
 868                 bias-disable;
 869                 drive-strength = <2>;
 870         };
 871
 872         uart13_state: uart13-state {
 873                 cts-pins {
 874                         pins = "gpio43";
 875                         function = "qup13";
 876                         bias-pull-down;
 877                 };
 878
 879                 rts-tx-pins {
 880                         pins = "gpio44", "gpio45";
 881                         function = "qup13";
 882                         drive-strength = <2>;
 883                         bias-disable;
 884                 };
 885
 886                 rx-pins {
 887                         pins = "gpio46";
 888                         function = "qup13";
 889                         bias-pull-up;
 890                 };
 891         };
 892 };