arch/arm64/boot/dts/qcom/sc8180x-pmics.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2021-2023, Linaro Limited
   5  */
   6
   7 #include <dt-bindings/input/input.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include <dt-bindings/spmi/spmi.h>
  10 #include <dt-bindings/iio/qcom,spmi-vadc.h>
  11
  12 / {
  13         thermal-zones {
  14                 pmc8180-thermal {
  15                         polling-delay-passive = <100>;
  16                         polling-delay = <0>;
  17
  18                         thermal-sensors = <&pmc8180_temp>;
  19
  20                         trips {
  21                                 trip0 {
  22                                         temperature = <95000>;
  23                                         hysteresis = <0>;
  24                                         type = "passive";
  25                                 };
  26
  27                                 trip1 {
  28                                         temperature = <115000>;
  29                                         hysteresis = <0>;
  30                                         type = "hot";
  31                                 };
  32
  33                                 trip2 {
  34                                         temperature = <145000>;
  35                                         hysteresis = <0>;
  36                                         type = "critical";
  37                                 };
  38                         };
  39                 };
  40
  41                 pmc8180c-thermal {
  42                         polling-delay-passive = <100>;
  43                         polling-delay = <0>;
  44
  45                         thermal-sensors = <&pmc8180c_temp>;
  46
  47                         trips {
  48                                 trip0 {
  49                                         temperature = <95000>;
  50                                         hysteresis = <0>;
  51                                         type = "passive";
  52                                 };
  53
  54                                 trip1 {
  55                                         temperature = <115000>;
  56                                         hysteresis = <0>;
  57                                         type = "hot";
  58                                 };
  59
  60                                 trip2 {
  61                                         temperature = <145000>;
  62                                         hysteresis = <0>;
  63                                         type = "critical";
  64                                 };
  65                         };
  66                 };
  67         };
  68 };
  69
  70 &spmi_bus {
  71         pmc8180_0: pmic@0 {
  72                 compatible = "qcom,pm8150", "qcom,spmi-pmic";
  73                 reg = <0x0 SPMI_USID>;
  74                 #address-cells = <1>;
  75                 #size-cells = <0>;
  76
  77                 pon: pon@800 {
  78                         compatible = "qcom,pm8916-pon";
  79                         reg = <0x0800>;
  80                         pwrkey {
  81                                 compatible = "qcom,pm8941-pwrkey";
  82                                 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
  83                                 debounce = <15625>;
  84                                 bias-pull-up;
  85                                 linux,code = <KEY_POWER>;
  86
  87                                 status = "disabled";
  88                         };
  89                 };
  90
  91                 pmc8180_temp: temp-alarm@2400 {
  92                         compatible = "qcom,spmi-temp-alarm";
  93                         reg = <0x2400>;
  94                         interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
  95                         io-channels = <&pmc8180_adc ADC5_DIE_TEMP>;
  96                         io-channel-names = "thermal";
  97                         #thermal-sensor-cells = <0>;
  98                 };
  99
 100                 pmc8180_adc: adc@3100 {
 101                         compatible = "qcom,spmi-adc5";
 102                         reg = <0x3100>;
 103                         #address-cells = <1>;
 104                         #size-cells = <0>;
 105                         #io-channel-cells = <1>;
 106                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 107
 108                         channel@0 {
 109                                 reg = <ADC5_REF_GND>;
 110                                 qcom,pre-scaling = <1 1>;
 111                                 label = "ref_gnd";
 112                         };
 113
 114                         channel@1 {
 115                                 reg = <ADC5_1P25VREF>;
 116                                 qcom,pre-scaling = <1 1>;
 117                                 label = "vref_1p25";
 118                         };
 119
 120                         channel@6 {
 121                                 reg = <ADC5_DIE_TEMP>;
 122                                 qcom,pre-scaling = <1 1>;
 123                                 label = "die_temp";
 124                         };
 125                 };
 126
 127                 pmc8180_adc_tm: adc-tm@3500 {
 128                         compatible = "qcom,spmi-adc-tm5";
 129                         reg = <0x3500>;
 130                         interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 131                         #thermal-sensor-cells = <1>;
 132                         #address-cells = <1>;
 133                         #size-cells = <0>;
 134                         status = "disabled";
 135                 };
 136
 137                 rtc@6000 {
 138                         compatible = "qcom,pm8941-rtc";
 139                         reg = <0x6000>;
 140                         reg-names = "rtc", "alarm";
 141                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
 142                 };
 143
 144                 pmc8180_gpios: gpio@c000 {
 145                         compatible = "qcom,pmc8180-gpio", "qcom,spmi-gpio";
 146                         reg = <0xc000>;
 147                         gpio-controller;
 148                         gpio-ranges = <&pmc8180_gpios 0 0 10>;
 149                         #gpio-cells = <2>;
 150                         interrupt-controller;
 151                         #interrupt-cells = <2>;
 152                 };
 153         };
 154
 155         pmic@1 {
 156                 compatible = "qcom,pmc8180", "qcom,spmi-pmic";
 157                 reg = <0x1 SPMI_USID>;
 158                 #address-cells = <1>;
 159                 #size-cells = <0>;
 160         };
 161
 162         pmic@2 {
 163                 compatible = "qcom,smb2351", "qcom,spmi-pmic";
 164                 reg = <0x2 SPMI_USID>;
 165                 #address-cells = <1>;
 166                 #size-cells = <0>;
 167
 168                 adc@3100 {
 169                         compatible = "qcom,spmi-adc-rev2";
 170                         reg = <0x3100>;
 171                         #address-cells = <1>;
 172                         #size-cells = <0>;
 173                         #io-channel-cells = <1>;
 174                         interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 175
 176                         channel@0 {
 177                                 reg = <ADC5_REF_GND>;
 178                                 qcom,pre-scaling = <1 1>;
 179                                 label = "ref_gnd";
 180                         };
 181
 182                         channel@1 {
 183                                 reg = <ADC5_1P25VREF>;
 184                                 qcom,pre-scaling = <1 1>;
 185                                 label = "vref_1p25";
 186                         };
 187
 188                         channel@85 {
 189                                 reg = <0x85>;
 190                                 qcom,pre-scaling = <1 1>;
 191                                 label = "vcoin2";
 192                         };
 193                 };
 194         };
 195
 196         pmic@6 {
 197                 compatible = "qcom,pm8150c", "qcom,spmi-pmic";
 198                 reg = <0x6 SPMI_USID>;
 199                 #address-cells = <1>;
 200                 #size-cells = <0>;
 201         };
 202
 203         pmic@8 {
 204                 compatible = "qcom,pm8150", "qcom,spmi-pmic";
 205                 reg = <0x8 SPMI_USID>;
 206                 #address-cells = <1>;
 207                 #size-cells = <0>;
 208         };
 209
 210         pmic@a {
 211                 compatible = "qcom,smb2351", "qcom,spmi-pmic";
 212                 reg = <0xa SPMI_USID>;
 213                 #address-cells = <1>;
 214                 #size-cells = <0>;
 215
 216                 adc@3100 {
 217                         compatible = "qcom,spmi-adc-rev2";
 218                         reg = <0x3100>;
 219                         #address-cells = <1>;
 220                         #size-cells = <0>;
 221                         #io-channel-cells = <1>;
 222                         interrupts = <0xa 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 223
 224                         channel@0 {
 225                                 reg = <ADC5_REF_GND>;
 226                                 qcom,pre-scaling = <1 1>;
 227                                 label = "ref_gnd";
 228                         };
 229
 230                         channel@1 {
 231                                 reg = <ADC5_1P25VREF>;
 232                                 qcom,pre-scaling = <1 1>;
 233                                 label = "vref_1p25";
 234                         };
 235
 236                         channel@85 {
 237                                 reg = <0x85>;
 238                                 qcom,pre-scaling = <1 1>;
 239                                 label = "vcoin";
 240                         };
 241                 };
 242         };
 243
 244         pmic@4 {
 245                 compatible = "qcom,pm8150c", "qcom,spmi-pmic";
 246                 reg = <0x4 SPMI_USID>;
 247                 #address-cells = <1>;
 248                 #size-cells = <0>;
 249
 250                 pon@800 {
 251                         compatible = "qcom,pm8916-pon";
 252                         reg = <0x0800>;
 253
 254                         status = "disabled";
 255                 };
 256
 257                 pmc8180c_temp: temp-alarm@2400 {
 258                         compatible = "qcom,spmi-temp-alarm";
 259                         reg = <0x2400>;
 260                         interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 261                         io-channels = <&pmc8180c_adc ADC5_DIE_TEMP>;
 262                         io-channel-names = "thermal";
 263                         #thermal-sensor-cells = <0>;
 264                 };
 265
 266                 pmc8180c_adc: adc@3100 {
 267                         compatible = "qcom,spmi-adc5";
 268                         reg = <0x3100>;
 269                         #address-cells = <1>;
 270                         #size-cells = <0>;
 271                         #io-channel-cells = <1>;
 272                         interrupts = <0x4 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 273
 274                         channel@0 {
 275                                 reg = <ADC5_REF_GND>;
 276                                 qcom,pre-scaling = <1 1>;
 277                                 label = "ref_gnd";
 278                         };
 279
 280                         channel@1 {
 281                                 reg = <ADC5_1P25VREF>;
 282                                 qcom,pre-scaling = <1 1>;
 283                                 label = "vref_1p25";
 284                         };
 285
 286                         channel@6 {
 287                                 reg = <ADC5_DIE_TEMP>;
 288                                 qcom,pre-scaling = <1 1>;
 289                                 label = "die_temp";
 290                         };
 291                 };
 292
 293                 pmc8180c_adc_tm: adc-tm@3500 {
 294                         compatible = "qcom,spmi-adc-tm5";
 295                         reg = <0x3500>;
 296                         interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 297                         #thermal-sensor-cells = <1>;
 298                         #address-cells = <1>;
 299                         #size-cells = <0>;
 300                         status = "disabled";
 301                 };
 302
 303                 pmc8180c_gpios: gpio@c000 {
 304                         compatible = "qcom,pmc8180c-gpio", "qcom,spmi-gpio";
 305                         reg = <0xc000>;
 306                         gpio-controller;
 307                         gpio-ranges = <&pmc8180c_gpios 0 0 12>;
 308                         #gpio-cells = <2>;
 309                         interrupt-controller;
 310                         #interrupt-cells = <2>;
 311                 };
 312         };
 313
 314         pmic@5 {
 315                 compatible = "qcom,pmc8180c", "qcom,spmi-pmic";
 316                 reg = <0x5 SPMI_USID>;
 317
 318                 pmc8180c_lpg: pwm {
 319                         compatible = "qcom,pmc8180c-lpg";
 320
 321                         #address-cells = <1>;
 322                         #size-cells = <0>;
 323                         #pwm-cells = <2>;
 324
 325                         status = "disabled";
 326                 };
 327         };
 328 };