arch/arm64/boot/dts/qcom/sc7280-herobrine-zombie.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google Zombie board device tree source
   4  *
   5  * Copyright 2022 Google LLC.
   6  */
   7
   8 #include "sc7280-herobrine.dtsi"
   9 #include "sc7280-herobrine-audio-rt5682.dtsi"
  10
  11 /*
  12  * ADDITIONS TO FIXED REGULATORS DEFINED IN PARENT DEVICE TREE FILES
  13  *
  14  * Sort order matches the order in the parent files (parents before children).
  15  */
  16
  17 &pp3300_codec {
  18         status = "okay";
  19 };
  20
  21 /* ADDITIONS TO NODES DEFINED IN PARENT DEVICE TREE FILES */
  22
  23 ap_tp_i2c: &i2c0 {
  24         clock-frequency = <400000>;
  25         status = "okay";
  26
  27         trackpad: trackpad@15 {
  28                 compatible = "hid-over-i2c";
  29                 reg = <0x15>;
  30                 pinctrl-names = "default";
  31                 pinctrl-0 = <&tp_int_odl>;
  32
  33                 interrupt-parent = <&tlmm>;
  34                 interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
  35
  36                 hid-descr-addr = <0x01>;
  37                 vdd-supply = <&pp3300_z1>;
  38
  39                 wakeup-source;
  40         };
  41 };
  42
  43 &ap_sar_sensor_i2c {
  44         status = "okay";
  45 };
  46
  47 &ap_sar_sensor0 {
  48         status = "okay";
  49 };
  50
  51 &ap_sar_sensor1 {
  52         status = "okay";
  53 };
  54
  55 &mdss_edp {
  56         status = "okay";
  57 };
  58
  59 &mdss_edp_phy {
  60         status = "okay";
  61 };
  62
  63 &pm8350c_pwm_backlight {
  64         /* Set the PWM period to 320 microseconds (3.125kHz frequency) */
  65         pwms = <&pm8350c_pwm 3 320000>;
  66 };
  67
  68 &pwmleds {
  69         status = "okay";
  70 };
  71
  72 /* For eMMC */
  73 &sdhc_1 {
  74         status = "okay";
  75 };
  76
  77 /* PINCTRL - ADDITIONS TO NODES IN PARENT DEVICE TREE FILES */
  78
  79 &ts_rst_conn {
  80         bias-disable;
  81 };
  82
  83 /* PINCTRL - BOARD-SPECIFIC */
  84
  85 /*
  86  * Methodology for gpio-line-names:
  87  * - If a pin goes to herobrine board and is named it gets that name.
  88  * - If a pin goes to herobrine board and is not named, it gets no name.
  89  * - If a pin is totally internal to Qcard then it gets Qcard name.
  90  * - If a pin is not hooked up on Qcard, it gets no name.
  91  */
  92
  93 &pm8350c_gpios {
  94         gpio-line-names = "FLASH_STROBE_1",             /* 1 */
  95                           "AP_SUSPEND",
  96                           "PM8008_1_RST_N",
  97                           "",
  98                           "",
  99                           "",
 100                           "PMIC_EDP_BL_EN",
 101                           "PMIC_EDP_BL_PWM",
 102                           "";
 103 };
 104
 105 &tlmm {
 106         gpio-line-names = "AP_TP_I2C_SDA",              /* 0 */
 107                           "AP_TP_I2C_SCL",
 108                           "SSD_RST_L",
 109                           "PE_WAKE_ODL",
 110                           "AP_SAR_SDA",
 111                           "AP_SAR_SCL",
 112                           "PRB_SC_GPIO_6",
 113                           "TP_INT_ODL",
 114                           "HP_I2C_SDA",
 115                           "HP_I2C_SCL",
 116
 117                           "GNSS_L1_EN",                 /* 10 */
 118                           "GNSS_L5_EN",
 119                           "SPI_AP_MOSI",
 120                           "SPI_AP_MISO",
 121                           "SPI_AP_CLK",
 122                           "SPI_AP_CS0_L",
 123                           /*
 124                            * AP_FLASH_WP is crossystem ABI. Schematics
 125                            * call it BIOS_FLASH_WP_OD.
 126                            */
 127                           "AP_FLASH_WP",
 128                           "",
 129                           "AP_EC_INT_L",
 130                           "",
 131
 132                           "UF_CAM_RST_L",               /* 20 */
 133                           "WF_CAM_RST_L",
 134                           "UART_AP_TX_DBG_RX",
 135                           "UART_DBG_TX_AP_RX",
 136                           "",
 137                           "PM8008_IRQ_1",
 138                           "HOST2WLAN_SOL",
 139                           "WLAN2HOST_SOL",
 140                           "MOS_BT_UART_CTS",
 141                           "MOS_BT_UART_RFR",
 142
 143                           "MOS_BT_UART_TX",             /* 30 */
 144                           "MOS_BT_UART_RX",
 145                           "PRB_SC_GPIO_32",
 146                           "HUB_RST_L",
 147                           "",
 148                           "",
 149                           "AP_SPI_FP_MISO",
 150                           "AP_SPI_FP_MOSI",
 151                           "AP_SPI_FP_CLK",
 152                           "AP_SPI_FP_CS_L",
 153
 154                           "AP_EC_SPI_MISO",             /* 40 */
 155                           "AP_EC_SPI_MOSI",
 156                           "AP_EC_SPI_CLK",
 157                           "AP_EC_SPI_CS_L",
 158                           "LCM_RST_L",
 159                           "EARLY_EUD_N",
 160                           "",
 161                           "DP_HOT_PLUG_DET",
 162                           "IO_BRD_MLB_ID0",
 163                           "IO_BRD_MLB_ID1",
 164
 165                           "IO_BRD_MLB_ID2",             /* 50 */
 166                           "SSD_EN",
 167                           "TS_I2C_SDA_CONN",
 168                           "TS_I2C_CLK_CONN",
 169                           "TS_RST_CONN",
 170                           "TS_INT_CONN",
 171                           "AP_I2C_TPM_SDA",
 172                           "AP_I2C_TPM_SCL",
 173                           "PRB_SC_GPIO_58",
 174                           "PRB_SC_GPIO_59",
 175
 176                           "EDP_HOT_PLUG_DET_N",         /* 60 */
 177                           "FP_TO_AP_IRQ_L",
 178                           "",
 179                           "AMP_EN",
 180                           "CAM0_MCLK_GPIO_64",
 181                           "CAM1_MCLK_GPIO_65",
 182                           "WF_CAM_MCLK",
 183                           "PRB_SC_GPIO_67",
 184                           "FPMCU_BOOT0",
 185                           "UF_CAM_SDA",
 186
 187                           "UF_CAM_SCL",                 /* 70 */
 188                           "",
 189                           "",
 190                           "WF_CAM_SDA",
 191                           "WF_CAM_SCL",
 192                           "",
 193                           "",
 194                           "EN_FP_RAILS",
 195                           "FP_RST_L",
 196                           "PCIE1_CLKREQ_ODL",
 197
 198                           "EN_PP3300_DX_EDP",           /* 80 */
 199                           "US_EURO_HS_SEL",
 200                           "FORCED_USB_BOOT",
 201                           "WCD_RESET_N",
 202                           "MOS_WLAN_EN",
 203                           "MOS_BT_EN",
 204                           "MOS_SW_CTRL",
 205                           "MOS_PCIE0_RST",
 206                           "MOS_PCIE0_CLKREQ_N",
 207                           "MOS_PCIE0_WAKE_N",
 208
 209                           "MOS_LAA_AS_EN",              /* 90 */
 210                           "SD_CD_ODL",
 211                           "",
 212                           "",
 213                           "MOS_BT_WLAN_SLIMBUS_CLK",
 214                           "MOS_BT_WLAN_SLIMBUS_DAT0",
 215                           "HP_MCLK",
 216                           "HP_BCLK",
 217                           "HP_DOUT",
 218                           "HP_DIN",
 219
 220                           "HP_LRCLK",                   /* 100 */
 221                           "HP_IRQ",
 222                           "",
 223                           "",
 224                           "GSC_AP_INT_ODL",
 225                           "EN_PP3300_CODEC",
 226                           "AMP_BCLK",
 227                           "AMP_DIN",
 228                           "AMP_LRCLK",
 229                           "UIM1_DATA_GPIO_109",
 230
 231                           "UIM1_CLK_GPIO_110",          /* 110 */
 232                           "UIM1_RESET_GPIO_111",
 233                           "PRB_SC_GPIO_112",
 234                           "UIM0_DATA",
 235                           "UIM0_CLK",
 236                           "UIM0_RST",
 237                           "UIM0_PRESENT_ODL",
 238                           "SDM_RFFE0_CLK",
 239                           "SDM_RFFE0_DATA",
 240                           "WF_CAM_EN",
 241
 242                           "FASTBOOT_SEL_0",             /* 120 */
 243                           "SC_GPIO_121",
 244                           "FASTBOOT_SEL_1",
 245                           "SC_GPIO_123",
 246                           "FASTBOOT_SEL_2",
 247                           "SM_RFFE4_CLK_GRFC_8",
 248                           "SM_RFFE4_DATA_GRFC_9",
 249                           "WLAN_COEX_UART1_RX",
 250                           "WLAN_COEX_UART1_TX",
 251                           "PRB_SC_GPIO_129",
 252
 253                           "LCM_ID0",                    /* 130 */
 254                           "LCM_ID1",
 255                           "",
 256                           "SDR_QLINK_REQ",
 257                           "SDR_QLINK_EN",
 258                           "QLINK0_WMSS_RESET_N",
 259                           "SMR526_QLINK1_REQ",
 260                           "SMR526_QLINK1_EN",
 261                           "SMR526_QLINK1_WMSS_RESET_N",
 262                           "PRB_SC_GPIO_139",
 263
 264                           "SAR1_IRQ_ODL",               /* 140 */
 265                           "SAR0_IRQ_ODL",
 266                           "PRB_SC_GPIO_142",
 267                           "",
 268                           "WCD_SWR_TX_CLK",
 269                           "WCD_SWR_TX_DATA0",
 270                           "WCD_SWR_TX_DATA1",
 271                           "WCD_SWR_RX_CLK",
 272                           "WCD_SWR_RX_DATA0",
 273                           "WCD_SWR_RX_DATA1",
 274
 275                           "DMIC01_CLK",                 /* 150 */
 276                           "DMIC01_DATA",
 277                           "DMIC23_CLK",
 278                           "DMIC23_DATA",
 279                           "",
 280                           "",
 281                           "EC_IN_RW_ODL",
 282                           "HUB_EN",
 283                           "WCD_SWR_TX_DATA2",
 284                           "",
 285
 286                           "",                           /* 160 */
 287                           "",
 288                           "",
 289                           "",
 290                           "",
 291                           "",
 292                           "",
 293                           "",
 294                           "",
 295                           "",
 296
 297                           "",                           /* 170 */
 298                           "MOS_BLE_UART_TX",
 299                           "MOS_BLE_UART_RX",
 300                           "",
 301                           "";
 302 };