arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google Pompom board device tree source
   4  *
   5  * Copyright 2020 Google LLC.
   6  */
   7
   8 #include "sc7180-trogdor.dtsi"
   9 /* Must come after sc7180-trogdor.dtsi to modify cros_ec */
  10 #include <arm/cros-ec-keyboard.dtsi>
  11 #include "sc7180-trogdor-rt5682i-sku.dtsi"
  12 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
  13
  14 / {
  15         thermal-zones {
  16                 5v-choke-thermal {
  17                         polling-delay-passive = <0>;
  18                         polling-delay = <250>;
  19
  20                         thermal-sensors = <&pm6150_adc_tm 1>;
  21
  22                         trips {
  23                                 5v-choke-crit {
  24                                         temperature = <125000>;
  25                                         hysteresis = <1000>;
  26                                         type = "critical";
  27                                 };
  28                         };
  29                 };
  30         };
  31 };
  32
  33 &alc5682 {
  34         realtek,dmic-clk-driving-high;
  35 };
  36
  37 &ap_tp_i2c {
  38         status = "okay";
  39 };
  40
  41 &cpu6_alert0 {
  42         temperature = <60000>;
  43 };
  44
  45 &cpu6_alert1 {
  46         temperature = <65000>;
  47 };
  48
  49 &cpu6_thermal {
  50         sustainable-power = <1124>;
  51 };
  52
  53 &cpu7_alert0 {
  54         temperature = <60000>;
  55 };
  56
  57 &cpu7_alert1 {
  58         temperature = <65000>;
  59 };
  60
  61 &cpu7_thermal {
  62         sustainable-power = <1124>;
  63 };
  64
  65 &cpu8_alert0 {
  66         temperature = <60000>;
  67 };
  68
  69 &cpu8_alert1 {
  70         temperature = <65000>;
  71 };
  72
  73 &cpu8_thermal {
  74         sustainable-power = <1124>;
  75 };
  76
  77 &cpu9_alert0 {
  78         temperature = <60000>;
  79 };
  80
  81 &cpu9_alert1 {
  82         temperature = <65000>;
  83 };
  84
  85 &cpu9_thermal {
  86         sustainable-power = <1124>;
  87 };
  88
  89 &gpio_keys {
  90         status = "okay";
  91 };
  92
  93 ap_ts_pen_1v8: &i2c4 {
  94         status = "okay";
  95         clock-frequency = <400000>;
  96
  97         ap_ts: touchscreen@10 {
  98                 compatible = "hid-over-i2c";
  99                 reg = <0x10>;
 100                 pinctrl-names = "default";
 101                 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
 102
 103                 interrupt-parent = <&tlmm>;
 104                 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 105
 106                 panel = <&panel>;
 107                 post-power-on-delay-ms = <20>;
 108                 hid-descr-addr = <0x0001>;
 109
 110                 vdd-supply = <&pp3300_ts>;
 111         };
 112 };
 113
 114 &keyboard_controller {
 115         function-row-physmap = <
 116                 MATRIX_KEY(0x00, 0x02, 0)       /* T1 */
 117                 MATRIX_KEY(0x03, 0x02, 0)       /* T2 */
 118                 MATRIX_KEY(0x02, 0x02, 0)       /* T3 */
 119                 MATRIX_KEY(0x01, 0x02, 0)       /* T4 */
 120                 MATRIX_KEY(0x03, 0x04, 0)       /* T5 */
 121                 MATRIX_KEY(0x02, 0x04, 0)       /* T6 */
 122                 MATRIX_KEY(0x01, 0x04, 0)       /* T7 */
 123                 MATRIX_KEY(0x02, 0x09, 0)       /* T8 */
 124                 MATRIX_KEY(0x01, 0x09, 0)       /* T9 */
 125                 MATRIX_KEY(0x00, 0x04, 0)       /* T10 */
 126         >;
 127         linux,keymap = <
 128                 MATRIX_KEY(0x00, 0x02, KEY_BACK)
 129                 MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
 130                 MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
 131                 MATRIX_KEY(0x01, 0x02, KEY_SCALE)
 132                 MATRIX_KEY(0x03, 0x04, KEY_SYSRQ)
 133                 MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN)
 134                 MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP)
 135                 MATRIX_KEY(0x02, 0x09, KEY_MUTE)
 136                 MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
 137                 MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
 138
 139                 CROS_STD_MAIN_KEYMAP
 140         >;
 141 };
 142
 143 &panel {
 144         compatible = "kingdisplay,kd116n21-30nv-a010";
 145 };
 146
 147 &pen_insert {
 148         /* Insert = high, eject = low */
 149         gpios = <&tlmm 52 GPIO_ACTIVE_HIGH>;
 150 };
 151
 152 &pm6150_adc {
 153         channel@4e {
 154                 reg = <ADC5_AMUX_THM2_100K_PU>;
 155                 qcom,ratiometric;
 156                 qcom,hw-settle-time = <200>;
 157                 label = "5v_choke_therm";
 158         };
 159 };
 160
 161 &pm6150_adc_tm {
 162         status = "okay";
 163
 164         5v-choke-thermistor@1 {
 165                 reg = <1>;
 166                 io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
 167                 qcom,ratiometric;
 168                 qcom,hw-settle-time-us = <200>;
 169         };
 170 };
 171
 172 &sdhc_2 {
 173         status = "okay";
 174 };
 175
 176 &sound {
 177         model = "sc7180-rt5682-max98357a-2mic";
 178         pinctrl-names = "default";
 179         pinctrl-0 = <&dmic_sel>;
 180         dmic-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
 181 };
 182
 183 &usb_c1 {
 184         status = "disabled";
 185 };
 186
 187 &wifi {
 188         qcom,ath10k-calibration-variant = "GO_POMPOM";
 189 };
 190
 191 /* PINCTRL - board-specific pinctrl */
 192
 193 &tlmm {
 194         gpio-line-names = "TP_INT_ODL",
 195                           "AP_RAM_ID0",
 196                           "AP_SKU_ID2",
 197                           "AP_RAM_ID1",
 198                           "",
 199                           "AP_RAM_ID2",
 200                           "AP_TP_I2C_SDA",
 201                           "AP_TP_I2C_SCL",
 202                           "TS_RESET_L",
 203                           "TS_INT_L",
 204                           "",
 205                           "EDP_BRIJ_IRQ",
 206                           "AP_EDP_BKLTEN",
 207                           "",
 208                           "",
 209                           "EDP_BRIJ_I2C_SDA",
 210                           "EDP_BRIJ_I2C_SCL",
 211                           "HUB_RST_L",
 212                           "",
 213                           "",
 214                           "",
 215                           "",
 216                           "",
 217                           "AMP_EN",
 218                           "P_SENSOR_INT_L",
 219                           "AP_SAR_SENSOR_SDA",
 220                           "AP_SAR_SENSOR_SCL",
 221                           "",
 222                           "HP_IRQ",
 223                           "",
 224                           "EN_PP3300_DX_EDP",
 225                           "AP_BRD_ID2",
 226                           "BRIJ_SUSPEND",
 227                           "AP_BRD_ID0",
 228                           "AP_H1_SPI_MISO",
 229                           "AP_H1_SPI_MOSI",
 230                           "AP_H1_SPI_CLK",
 231                           "AP_H1_SPI_CS_L",
 232                           "",
 233                           "",
 234                           "",
 235                           "",
 236                           "H1_AP_INT_ODL",
 237                           "",
 238                           "UART_AP_TX_DBG_RX",
 239                           "UART_DBG_TX_AP_RX",
 240                           "HP_I2C_SDA",
 241                           "HP_I2C_SCL",
 242                           "FORCED_USB_BOOT",
 243                           "AMP_BCLK",
 244                           "AMP_LRCLK",
 245                           "AMP_DIN",
 246                           "PEN_PDCT_L",
 247                           "HP_BCLK",
 248                           "HP_LRCLK",
 249                           "HP_DOUT",
 250                           "HP_DIN",
 251                           "HP_MCLK",
 252                           "AP_SKU_ID0",
 253                           "AP_EC_SPI_MISO",
 254                           "AP_EC_SPI_MOSI",
 255                           "AP_EC_SPI_CLK",
 256                           "AP_EC_SPI_CS_L",
 257                           "AP_SPI_CLK",
 258                           "AP_SPI_MOSI",
 259                           "AP_SPI_MISO",
 260                           /*
 261                            * AP_FLASH_WP_L is crossystem ABI. Schematics
 262                            * call it BIOS_FLASH_WP_L.
 263                            */
 264                           "AP_FLASH_WP_L",
 265                           "",
 266                           "AP_SPI_CS0_L",
 267                           "SD_CD_ODL",
 268                           "",
 269                           "",
 270                           "",
 271                           "",
 272                           "",
 273                           "UIM2_DATA",
 274                           "UIM2_CLK",
 275                           "UIM2_RST",
 276                           "UIM2_PRESENT",
 277                           "UIM1_DATA",
 278                           "UIM1_CLK",
 279                           "UIM1_RST",
 280                           "",
 281                           "EN_PP3300_CODEC",
 282                           "EN_PP3300_HUB",
 283                           "",
 284                           "DMIC_SEL",
 285                           "",
 286                           "",
 287                           "",
 288                           "AP_SKU_ID1",
 289                           "AP_RST_REQ",
 290                           "",
 291                           "AP_BRD_ID1",
 292                           "AP_EC_INT_R_L",
 293                           "",
 294                           "",
 295                           "",
 296                           "",
 297                           "",
 298                           "",
 299                           "",
 300                           "",
 301                           "",
 302                           "EDP_BRIJ_EN",
 303                           "",
 304                           "",
 305                           "",
 306                           "",
 307                           "",
 308                           "",
 309                           "",
 310                           "",
 311                           "",
 312                           "",
 313                           "AP_TS_PEN_I2C_SDA",
 314                           "AP_TS_PEN_I2C_SCL",
 315                           "DP_HOT_PLUG_DET",
 316                           "EC_IN_RW_ODL";
 317
 318         dmic_sel: dmic-sel-state {
 319                 pins = "gpio86";
 320                 function = "gpio";
 321                 bias-pull-down;
 322         };
 323 };