arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Google CoachZ board device tree source
   4  *
   5  * Copyright 2020 Google LLC.
   6  */
   7
   8 #include "sc7180-trogdor.dtsi"
   9 #include "sc7180-trogdor-ti-sn65dsi86.dtsi"
  10
  11 /* Deleted nodes from sc7180-trogdor.dtsi */
  12
  13 /delete-node/ &alc5682;
  14 /delete-node/ &pp3300_codec;
  15
  16 / {
  17         /* BOARD-SPECIFIC TOP LEVEL NODES */
  18
  19         adau7002: audio-codec-1 {
  20                 compatible = "adi,adau7002";
  21                 IOVDD-supply = <&pp1800_l15a>;
  22                 wakeup-delay-ms = <80>;
  23                 #sound-dai-cells = <0>;
  24         };
  25
  26         thermal-zones {
  27                 skin_temp_thermal: skin-temp-thermal {
  28                         polling-delay-passive = <250>;
  29                         polling-delay = <0>;
  30
  31                         thermal-sensors = <&pm6150_adc_tm 1>;
  32                         sustainable-power = <965>;
  33
  34                         trips {
  35                                 skin_temp_alert0: trip-point0 {
  36                                         temperature = <42000>;
  37                                         hysteresis = <1000>;
  38                                         type = "passive";
  39                                 };
  40
  41                                 skin_temp_alert1: trip-point1 {
  42                                         temperature = <45000>;
  43                                         hysteresis = <1000>;
  44                                         type = "passive";
  45                                 };
  46
  47                                 skin-temp-crit {
  48                                         temperature = <60000>;
  49                                         hysteresis = <1000>;
  50                                         type = "critical";
  51                                 };
  52                         };
  53
  54                         cooling-maps {
  55                                 map0 {
  56                                         trip = <&skin_temp_alert0>;
  57                                         cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
  58                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
  59                                 };
  60
  61                                 map1 {
  62                                         trip = <&skin_temp_alert1>;
  63                                         cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
  64                                                          <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
  65                                 };
  66                         };
  67                 };
  68         };
  69 };
  70
  71 &ap_spi_fp {
  72         status = "okay";
  73 };
  74
  75 &backlight {
  76         pwms = <&cros_ec_pwm 0>;
  77 };
  78
  79 &camcc {
  80         status = "okay";
  81 };
  82
  83 &cros_ec {
  84         keyboard-controller {
  85                 compatible = "google,cros-ec-keyb-switches";
  86         };
  87
  88         cros_ec_proximity: proximity {
  89                 compatible = "google,cros-ec-mkbp-proximity";
  90                 label = "proximity-wifi";
  91         };
  92 };
  93
  94 ap_ts_pen_1v8: &i2c4 {
  95         status = "okay";
  96         clock-frequency = <400000>;
  97
  98         ap_ts: touchscreen@5d {
  99                 compatible = "goodix,gt7375p";
 100                 reg = <0x5d>;
 101                 pinctrl-names = "default";
 102                 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>;
 103
 104                 interrupt-parent = <&tlmm>;
 105                 interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
 106
 107                 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>;
 108
 109                 vdd-supply = <&pp3300_ts>;
 110         };
 111 };
 112
 113 &i2c9 {
 114         status = "disabled";
 115 };
 116
 117 &panel {
 118         compatible = "boe,nv110wtm-n61";
 119 };
 120
 121 &pm6150_adc {
 122         skin-temp-thermistor@4e {
 123                 reg = <ADC5_AMUX_THM2_100K_PU>;
 124                 qcom,ratiometric;
 125                 qcom,hw-settle-time = <200>;
 126         };
 127 };
 128
 129 &pm6150_adc_tm {
 130         status = "okay";
 131
 132         skin-temp-thermistor@1 {
 133                 reg = <1>;
 134                 io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
 135                 qcom,ratiometric;
 136                 qcom,hw-settle-time-us = <200>;
 137         };
 138 };
 139
 140 &pp1800_uf_cam {
 141         status = "okay";
 142 };
 143
 144 &pp1800_wf_cam {
 145         status = "okay";
 146 };
 147
 148 &pp2800_uf_cam {
 149         status = "okay";
 150 };
 151
 152 &pp2800_wf_cam {
 153         status = "okay";
 154 };
 155
 156 &pp3300_dx_edp {
 157         gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>;
 158 };
 159
 160 &sdhc_2 {
 161         status = "okay";
 162 };
 163
 164 &sn65dsi86_out {
 165         data-lanes = <0 1 2 3>;
 166 };
 167
 168 &sound {
 169         compatible = "google,sc7180-coachz";
 170         model = "sc7180-adau7002-max98357a";
 171         audio-routing = "PDM_DAT", "DMIC";
 172
 173         pinctrl-names = "default";
 174         pinctrl-0 = <&dmic_clk_en>;
 175 };
 176
 177 &sound_multimedia0_codec {
 178         sound-dai = <&adau7002>;
 179 };
 180
 181 /* PINCTRL - modifications to sc7180-trogdor.dtsi */
 182
 183 &en_pp3300_dx_edp {
 184         pinmux  {
 185                 pins = "gpio67";
 186         };
 187
 188         pinconf {
 189                 pins = "gpio67";
 190         };
 191 };
 192
 193 &ts_reset_l {
 194         pinconf {
 195                 /*
 196                  * We want reset state by default and it will be up to the
 197                  * driver to disable this when it's ready.
 198                  */
 199                 output-low;
 200         };
 201 };
 202
 203 /* PINCTRL - board-specific pinctrl */
 204
 205 &tlmm {
 206         gpio-line-names = "HUB_RST_L",
 207                           "AP_RAM_ID0",
 208                           "AP_SKU_ID2",
 209                           "AP_RAM_ID1",
 210                           "FP_TO_AP_IRQ_L",
 211                           "AP_RAM_ID2",
 212                           "UF_CAM_EN",
 213                           "WF_CAM_EN",
 214                           "TS_RESET_L",
 215                           "TS_INT_L",
 216                           "FPMCU_BOOT0",
 217                           "EDP_BRIJ_IRQ",
 218                           "AP_EDP_BKLTEN",
 219                           "UF_CAM_MCLK",
 220                           "WF_CAM_CLK",
 221                           "EDP_BRIJ_I2C_SDA",
 222                           "EDP_BRIJ_I2C_SCL",
 223                           "UF_CAM_SDA",
 224                           "UF_CAM_SCL",
 225                           "WF_CAM_SDA",
 226                           "WF_CAM_SCL",
 227                           "WLC_IRQ",
 228                           "FP_RST_L",
 229                           "AMP_EN",
 230                           "WLC_NRST",
 231                           "AP_SAR_SENSOR_SDA",
 232                           "AP_SAR_SENSOR_SCL",
 233                           "",
 234                           "",
 235                           "WF_CAM_RST_L",
 236                           "UF_CAM_RST_L",
 237                           "AP_BRD_ID2",
 238                           "BRIJ_SUSPEND",
 239                           "AP_BRD_ID0",
 240                           "AP_H1_SPI_MISO",
 241                           "AP_H1_SPI_MOSI",
 242                           "AP_H1_SPI_CLK",
 243                           "AP_H1_SPI_CS_L",
 244                           "",
 245                           "",
 246                           "",
 247                           "",
 248                           "H1_AP_INT_ODL",
 249                           "",
 250                           "UART_AP_TX_DBG_RX",
 251                           "UART_DBG_TX_AP_RX",
 252                           "",
 253                           "",
 254                           "FORCED_USB_BOOT",
 255                           "AMP_BCLK",
 256                           "AMP_LRCLK",
 257                           "AMP_DIN",
 258                           "",
 259                           "HP_BCLK",
 260                           "HP_LRCLK",
 261                           "HP_DOUT",
 262                           "HP_DIN",
 263                           "HP_MCLK",
 264                           "AP_SKU_ID0",
 265                           "AP_EC_SPI_MISO",
 266                           "AP_EC_SPI_MOSI",
 267                           "AP_EC_SPI_CLK",
 268                           "AP_EC_SPI_CS_L",
 269                           "AP_SPI_CLK",
 270                           "AP_SPI_MOSI",
 271                           "AP_SPI_MISO",
 272                           /*
 273                            * AP_FLASH_WP_L is crossystem ABI. Schematics
 274                            * call it BIOS_FLASH_WP_L.
 275                            */
 276                           "AP_FLASH_WP_L",
 277                           "EN_PP3300_DX_EDP",
 278                           "AP_SPI_CS0_L",
 279                           "SD_CD_ODL",
 280                           "",
 281                           "",
 282                           "",
 283                           "",
 284                           "EN_FP_RAILS",
 285                           "UIM2_DATA",
 286                           "UIM2_CLK",
 287                           "UIM2_RST",
 288                           "UIM2_PRESENT_L",
 289                           "UIM1_DATA",
 290                           "UIM1_CLK",
 291                           "UIM1_RST",
 292                           "",
 293                           "",
 294                           "HUB_EN",
 295                           "",
 296                           "AP_SPI_FP_MISO",
 297                           "AP_SPI_FP_MOSI",
 298                           "AP_SPI_FP_CLK",
 299                           "AP_SPI_FP_CS_L",
 300                           "AP_SKU_ID1",
 301                           "AP_RST_REQ",
 302                           "",
 303                           "AP_BRD_ID1",
 304                           "AP_EC_INT_L",
 305                           "",
 306                           "",
 307                           "",
 308                           "",
 309                           "",
 310                           "",
 311                           "",
 312                           "",
 313                           "",
 314                           "EDP_BRIJ_EN",
 315                           "",
 316                           "",
 317                           "",
 318                           "",
 319                           "",
 320                           "",
 321                           "",
 322                           "",
 323                           "",
 324                           "",
 325                           "AP_TS_PEN_I2C_SDA",
 326                           "AP_TS_PEN_I2C_SCL",
 327                           "DP_HOT_PLUG_DET",
 328                           "EC_IN_RW_ODL";
 329
 330         dmic_clk_en: dmic_clk_en {
 331                 pinmux {
 332                         pins = "gpio83";
 333                         function = "gpio";
 334                 };
 335
 336                 pinconf {
 337                         pins = "gpio83";
 338                         drive-strength = <8>;
 339                         bias-pull-up;
 340                 };
 341         };
 342 };