arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2
   3 /dts-v1/;
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
   7
   8 #include "sc7180.dtsi"
   9
  10 #include "pm6150.dtsi"
  11 #include "pm6150l.dtsi"
  12
  13 /delete-node/ &tz_mem;
  14 /delete-node/ &ipa_fw_mem;
  15
  16 / {
  17         model = "Acer Aspire 1";
  18         compatible = "acer,aspire1", "qcom,sc7180";
  19         chassis-type = "laptop";
  20
  21         aliases {
  22                 bluetooth0 = &bluetooth;
  23                 hsuart0 = &uart3;
  24                 serial0 = &uart8;
  25                 wifi0 = &wifi;
  26         };
  27
  28         chosen {
  29                 stdout-path = "serial0:115200n8";
  30         };
  31
  32         reserved-memory {
  33                 zap_mem: zap-shader@80840000 {
  34                         reg = <0x0 0x80840000 0 0x2000>;
  35                         no-map;
  36                 };
  37
  38                 venus_mem: venus@85b00000 {
  39                         reg = <0x0 0x85b00000 0 0x500000>;
  40                         no-map;
  41                 };
  42
  43                 mpss_mem: mpss@86000000 {
  44                         reg = <0x0 0x86000000 0x0 0x2000000>;
  45                         no-map;
  46                 };
  47
  48                 adsp_mem: adsp@8e400000 {
  49                         reg = <0x0 0x8e400000 0x0 0x2800000>;
  50                         no-map;
  51                 };
  52
  53                 wlan_mem: wlan@93900000 {
  54                         reg = <0x0 0x93900000 0x0 0x200000>;
  55                         no-map;
  56                 };
  57         };
  58
  59         max98357a: audio-codec {
  60                 compatible = "maxim,max98357a";
  61                 sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
  62
  63                 pinctrl-0 = <&amp_sd_mode_default>;
  64                 pinctrl-names = "default";
  65
  66                 #sound-dai-cells = <0>;
  67         };
  68
  69         backlight: backlight {
  70                 compatible = "pwm-backlight";
  71                 pwms = <&sn65dsi86_bridge 1000000>;
  72                 enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
  73
  74                 pinctrl-0 = <&soc_bkoff_default>;
  75                 pinctrl-names = "default";
  76         };
  77
  78         reg_brij_1p2: bridge-1p2-regulator {
  79                 compatible = "regulator-fixed";
  80                 regulator-name = "brij_1p2";
  81                 regulator-min-microvolt = <1200000>;
  82                 regulator-max-microvolt = <1200000>;
  83
  84                 gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
  85                 enable-active-high;
  86
  87                 pinctrl-0 = <&reg_edp_1p2_en_default>;
  88                 pinctrl-names = "default";
  89         };
  90
  91         reg_brij_1p8: bridge-regulator {
  92                 compatible = "regulator-fixed";
  93                 regulator-name = "brij_1p8";
  94                 regulator-min-microvolt = <1800000>;
  95                 regulator-max-microvolt = <1800000>;
  96
  97                 vin-supply = <&vreg_l8c_1p8>;
  98
  99                 gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 100                 enable-active-high;
 101
 102                 pinctrl-0 = <&reg_edp_1p8_en_default>;
 103                 pinctrl-names = "default";
 104         };
 105
 106         reg_codec_3p3: codec-regulator {
 107                 compatible = "regulator-fixed";
 108                 regulator-name = "codec_3p3";
 109                 regulator-min-microvolt = <3300000>;
 110                 regulator-max-microvolt = <3300000>;
 111
 112                 gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
 113                 enable-active-high;
 114
 115                 pinctrl-0 = <&reg_audio_en_default>;
 116                 pinctrl-names = "default";
 117         };
 118
 119         reg_lcm_3p3: panel-regulator {
 120                 compatible = "regulator-fixed";
 121                 regulator-name = "lcm_3p3";
 122                 regulator-min-microvolt = <3300000>;
 123                 regulator-max-microvolt = <3300000>;
 124
 125                 gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
 126                 enable-active-high;
 127
 128                 pinctrl-0 = <&reg_lcm_en_default>;
 129                 pinctrl-names = "default";
 130         };
 131
 132         reg_tp_3p3: touchpad-regulator {
 133                 compatible = "regulator-fixed";
 134                 regulator-name = "tp_3p3";
 135                 regulator-min-microvolt = <3300000>;
 136                 regulator-max-microvolt = <3300000>;
 137
 138                 gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
 139                 enable-active-high;
 140
 141                 pinctrl-0 = <&reg_tp_en_default>;
 142                 pinctrl-names = "default";
 143         };
 144 };
 145
 146 &i2c2 {
 147         clock-frequency = <400000>;
 148         status = "okay";
 149
 150         /* embedded-controller@76 */
 151 };
 152
 153 &i2c4 {
 154         clock-frequency = <400000>;
 155         status = "okay";
 156
 157         /*
 158          * NOTE: DSDT defines two possible touchpads, other one is
 159          *
 160          * reg = <0x15>;
 161          * hid-descr-addr = <0x1>;
 162          */
 163
 164         touchpad@2c {
 165                 compatible = "hid-over-i2c";
 166                 reg = <0x2c>;
 167                 hid-descr-addr = <0x20>;
 168
 169                 vdd-supply = <&reg_tp_3p3>;
 170
 171                 interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
 172
 173                 pinctrl-0 = <&hid_touchpad_default>;
 174                 pinctrl-names = "default";
 175
 176                 wakeup-source;
 177         };
 178
 179         keyboard@3a {
 180                 compatible = "hid-over-i2c";
 181                 reg = <0x3a>;
 182                 hid-descr-addr = <0x1>;
 183
 184                 interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
 185
 186                 pinctrl-0 = <&hid_keyboard_default>;
 187                 pinctrl-names = "default";
 188
 189                 wakeup-source;
 190         };
 191 };
 192
 193 &i2c9 {
 194         clock-frequency = <400000>;
 195         status = "okay";
 196
 197         alc5682: codec@1a {
 198                 compatible = "realtek,rt5682i";
 199                 reg = <0x1a>;
 200
 201                 #sound-dai-cells = <1>;
 202
 203                 interrupt-parent = <&tlmm>;
 204                 interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
 205
 206                 pinctrl-0 = <&codec_irq_default>;
 207                 pinctrl-names = "default";
 208
 209                 AVDD-supply = <&vreg_l15a_1p8>;
 210                 MICVDD-supply = <&reg_codec_3p3>;
 211                 VBAT-supply = <&reg_codec_3p3>;
 212
 213                 realtek,dmic1-data-pin = <1>;
 214                 realtek,dmic1-clk-pin = <1>;
 215                 realtek,jd-src = <1>;
 216         };
 217 };
 218
 219 &i2c10 {
 220         clock-frequency = <400000>;
 221         status = "okay";
 222
 223         sn65dsi86_bridge: bridge@2c {
 224                 compatible = "ti,sn65dsi86";
 225                 reg = <0x2c>;
 226                 gpio-controller;
 227                 #gpio-cells = <2>;
 228                 #pwm-cells = <1>;
 229
 230                 interrupt-parent = <&tlmm>;
 231                 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
 232
 233                 enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
 234                 suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
 235
 236                 pinctrl-0 = <&bridge_en_default>,
 237                             <&edp_bridge_irq_default>,
 238                             <&bridge_suspend_default>;
 239                 pinctrl-names = "default";
 240
 241                 vpll-supply = <&reg_brij_1p8>;
 242                 vccio-supply = <&reg_brij_1p8>;
 243                 vcca-supply = <&reg_brij_1p2>;
 244                 vcc-supply = <&reg_brij_1p2>;
 245
 246                 clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
 247                 clock-names = "refclk";
 248
 249                 ports {
 250                         #address-cells = <1>;
 251                         #size-cells = <0>;
 252
 253                         port@0 {
 254                                 reg = <0>;
 255
 256                                 sn65dsi86_in: endpoint {
 257                                         remote-endpoint = <&mdss_dsi0_out>;
 258                                 };
 259                         };
 260
 261                         port@1 {
 262                                 reg = <1>;
 263
 264                                 sn65dsi86_out: endpoint {
 265                                         data-lanes = <0 1>;
 266                                         remote-endpoint = <&panel_in_edp>;
 267                                 };
 268                         };
 269                 };
 270
 271                 aux-bus {
 272                         panel: panel {
 273                                 compatible = "edp-panel";
 274                                 power-supply = <&reg_lcm_3p3>;
 275                                 backlight = <&backlight>;
 276                                 hpd-absent-delay-ms = <200>;
 277
 278                                 port {
 279                                         panel_in_edp: endpoint {
 280                                                 remote-endpoint = <&sn65dsi86_out>;
 281                                         };
 282                                 };
 283                         };
 284                 };
 285         };
 286 };
 287
 288 &gpu {
 289         status = "okay";
 290
 291         zap-shader {
 292                 memory-region = <&zap_mem>;
 293                 firmware-name = "/*(DEBLOBBED)*/";
 294         };
 295 };
 296
 297 &mdss {
 298         status = "okay";
 299 };
 300
 301 &mdss_dsi0 {
 302         vdda-supply = <&vreg_l3c_1p2>;
 303         status = "okay";
 304 };
 305
 306 &mdss_dsi0_out {
 307         remote-endpoint = <&sn65dsi86_in>;
 308         data-lanes = <0 1 2 3>;
 309 };
 310
 311 &mdss_dsi0_phy {
 312         vdds-supply = <&vreg_l4a_0p8>;
 313         status = "okay";
 314 };
 315
 316 &pm6150_adc {
 317         channel@4e {
 318                 reg = <ADC5_AMUX_THM2_100K_PU>;
 319                 qcom,ratiometric;
 320                 qcom,hw-settle-time = <200>;
 321                 label = "thermistor";
 322         };
 323
 324         channel@4f {
 325                 reg = <ADC5_AMUX_THM3_100K_PU>;
 326                 qcom,ratiometric;
 327                 qcom,hw-settle-time = <200>;
 328                 label = "charger_thermistor";
 329         };
 330 };
 331
 332 &pm6150_adc_tm {
 333         status = "okay";
 334
 335         charger-thermistor@0 {
 336                 reg = <0>;
 337                 io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
 338                 qcom,ratiometric;
 339                 qcom,hw-settle-time-us = <200>;
 340         };
 341
 342         thermistor@1 {
 343                 reg = <1>;
 344                 io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
 345                 qcom,ratiometric;
 346                 qcom,hw-settle-time-us = <200>;
 347         };
 348 };
 349
 350 &pm6150_pon {
 351         status = "disabled";
 352 };
 353
 354 &qupv3_id_0 {
 355         status = "okay";
 356 };
 357
 358 &qupv3_id_1 {
 359         status = "okay";
 360 };
 361
 362 &remoteproc_mpss {
 363         firmware-name = "/*(DEBLOBBED)*/";
 364         status = "okay";
 365 };
 366
 367 &sdhc_1 {
 368         pinctrl-0 = <&sdc1_default>;
 369         pinctrl-1 = <&sdc1_sleep>;
 370         pinctrl-names = "default", "sleep";
 371         vmmc-supply = <&vreg_l19a_2p9>;
 372         vqmmc-supply = <&vreg_l12a_1p8>;
 373
 374         status = "okay";
 375 };
 376
 377 &uart3 {
 378         /delete-property/interrupts;
 379         interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
 380                               <&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
 381
 382         pinctrl-1 = <&qup_uart3_sleep>;
 383         pinctrl-names = "default", "sleep";
 384
 385         status = "okay";
 386
 387         bluetooth: bluetooth {
 388                 compatible = "qcom,wcn3991-bt";
 389                 vddio-supply = <&vreg_l10a_1p8>;
 390                 vddxo-supply = <&vreg_l1c_1p8>;
 391                 vddrf-supply = <&vreg_l2c_1p3>;
 392                 vddch0-supply = <&vreg_l10c_3p3>;
 393                 max-speed = <3200000>;
 394         };
 395 };
 396
 397 &uart8 {
 398         status = "okay";
 399 };
 400
 401 &usb_1 {
 402         status = "okay";
 403 };
 404
 405 &usb_1_dwc3 {
 406         dr_mode = "host";
 407         #address-cells = <1>;
 408         #size-cells = <0>;
 409
 410         usb_hub_2_x: hub@1 {
 411                 compatible = "usbbda,5411";
 412                 reg = <1>;
 413                 peer-hub = <&usb_hub_3_x>;
 414         };
 415
 416         usb_hub_3_x: hub@2 {
 417                 compatible = "usbbda,411";
 418                 reg = <2>;
 419                 peer-hub = <&usb_hub_2_x>;
 420         };
 421 };
 422
 423 &usb_1_hsphy {
 424         vdd-supply = <&vreg_l4a_0p8>;
 425         vdda-pll-supply = <&vreg_l11a_1p8>;
 426         vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
 427         qcom,imp-res-offset-value = <8>;
 428         qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
 429         qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
 430         qcom,bias-ctrl-value = <0x22>;
 431         qcom,charge-ctrl-value = <3>;
 432         qcom,hsdisc-trim-value = <0>;
 433
 434         status = "okay";
 435 };
 436
 437 &usb_1_qmpphy {
 438         vdda-phy-supply = <&vreg_l3c_1p2>;
 439         vdda-pll-supply = <&vreg_l4a_0p8>;
 440
 441         status = "okay";
 442 };
 443
 444 &venus {
 445         firmware-name = "/*(DEBLOBBED)*/";
 446 };
 447
 448 &wifi {
 449         vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
 450         vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
 451         vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
 452         vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
 453         vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
 454
 455         status = "okay";
 456 };
 457
 458 &apps_rsc {
 459         regulators-0 {
 460                 compatible = "qcom,pm6150-rpmh-regulators";
 461                 qcom,pmic-id = "a";
 462
 463                 vreg_s1a_1p1: smps1 {
 464                         regulator-min-microvolt = <1128000>;
 465                         regulator-max-microvolt = <1128000>;
 466                 };
 467
 468                 vreg_l4a_0p8: ldo4 {
 469                         regulator-min-microvolt = <824000>;
 470                         regulator-max-microvolt = <928000>;
 471                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 472                 };
 473
 474                 vreg_l9a_0p6: ldo9 {
 475                         regulator-min-microvolt = <488000>;
 476                         regulator-max-microvolt = <800000>;
 477                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 478                 };
 479
 480                 vreg_l10a_1p8: ldo10 {
 481                         regulator-min-microvolt = <1800000>;
 482                         regulator-max-microvolt = <1800000>;
 483                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 484                         regulator-always-on;
 485                         regulator-boot-on;
 486                 };
 487
 488                 vreg_l11a_1p8: ldo11 {
 489                         regulator-min-microvolt = <1800000>;
 490                         regulator-max-microvolt = <1800000>;
 491                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 492                 };
 493
 494                 vreg_l12a_1p8: ldo12 {
 495                         regulator-min-microvolt = <1800000>;
 496                         regulator-max-microvolt = <1800000>;
 497                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 498                 };
 499
 500                 vreg_l13a_1p8: ldo13 {
 501                         regulator-min-microvolt = <1800000>;
 502                         regulator-max-microvolt = <1800000>;
 503                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 504                 };
 505
 506                 vreg_l14a_1p8: ldo14 {
 507                         regulator-min-microvolt = <1800000>;
 508                         regulator-max-microvolt = <1800000>;
 509                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 510                 };
 511
 512                 vreg_l15a_1p8: ldo15 {
 513                         regulator-min-microvolt = <1800000>;
 514                         regulator-max-microvolt = <1800000>;
 515                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 516                 };
 517
 518                 vreg_l16a_2p7: ldo16 {
 519                         regulator-min-microvolt = <2496000>;
 520                         regulator-max-microvolt = <3304000>;
 521                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 522                 };
 523
 524                 vreg_l17a_3p0: ldo17 {
 525                         regulator-min-microvolt = <2920000>;
 526                         regulator-max-microvolt = <3232000>;
 527                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 528                 };
 529
 530                 vreg_l18a_2p8: ldo18 {
 531                         regulator-min-microvolt = <2496000>;
 532                         regulator-max-microvolt = <3304000>;
 533                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 534                 };
 535
 536                 vreg_l19a_2p9: ldo19 {
 537                         regulator-min-microvolt = <2960000>;
 538                         regulator-max-microvolt = <2960000>;
 539                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 540                 };
 541         };
 542
 543         regulators-1 {
 544                 compatible = "qcom,pm6150l-rpmh-regulators";
 545                 qcom,pmic-id = "c";
 546
 547                 vreg_s8c_1p3: smps8 {
 548                         regulator-min-microvolt = <1120000>;
 549                         regulator-max-microvolt = <1408000>;
 550                 };
 551
 552                 vreg_l1c_1p8: ldo1 {
 553                         regulator-min-microvolt = <1616000>;
 554                         regulator-max-microvolt = <1984000>;
 555                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 556                 };
 557
 558                 vreg_l2c_1p3: ldo2 {
 559                         regulator-min-microvolt = <1168000>;
 560                         regulator-max-microvolt = <1304000>;
 561                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 562                 };
 563
 564                 vreg_l3c_1p2: ldo3 {
 565                         regulator-min-microvolt = <1144000>;
 566                         regulator-max-microvolt = <1304000>;
 567                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 568                 };
 569
 570                 vreg_l4c_1p8: ldo4 {
 571                         regulator-min-microvolt = <1648000>;
 572                         regulator-max-microvolt = <3304000>;
 573                         regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
 574                 };
 575
 576                 vreg_l5c_1p8: ldo5 {
 577                         regulator-min-microvolt = <1648000>;
 578                         regulator-max-microvolt = <3304000>;
 579                         regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
 580                 };
 581
 582                 vreg_l6c_2p9: ldo6 {
 583                         regulator-min-microvolt = <1800000>;
 584                         regulator-max-microvolt = <2950000>;
 585                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 586                 };
 587
 588                 vreg_l7c_3p0: ldo7 {
 589                         regulator-min-microvolt = <3000000>;
 590                         regulator-max-microvolt = <3312000>;
 591                         regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
 592                 };
 593
 594                 vreg_l8c_1p8: ldo8 {
 595                         regulator-min-microvolt = <1800000>;
 596                         regulator-max-microvolt = <1800000>;
 597                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 598                 };
 599
 600                 vreg_l9c_2p9: ldo9 {
 601                         regulator-min-microvolt = <2952000>;
 602                         regulator-max-microvolt = <2952000>;
 603                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 604                 };
 605
 606                 vreg_l10c_3p3: ldo10 {
 607                         regulator-min-microvolt = <3000000>;
 608                         regulator-max-microvolt = <3400000>;
 609                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 610                 };
 611
 612                 vreg_l11c_3p3: ldo11 {
 613                         regulator-min-microvolt = <3000000>;
 614                         regulator-max-microvolt = <3400000>;
 615                         regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 616                 };
 617
 618                 vreg_bob: bob {
 619                         regulator-min-microvolt = <3008000>;
 620                         regulator-max-microvolt = <3960000>;
 621                         regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
 622                 };
 623         };
 624 };
 625
 626 &qup_i2c2_default {
 627         drive-strength = <2>;
 628
 629         /* Has external pullup */
 630         bias-disable;
 631 };
 632
 633 &qup_i2c4_default {
 634         drive-strength = <2>;
 635
 636         /* Has external pullup */
 637         bias-disable;
 638 };
 639
 640 &qup_i2c9_default {
 641         drive-strength = <2>;
 642
 643         /* Has external pullup */
 644         bias-disable;
 645 };
 646
 647 &qup_i2c10_default {
 648         drive-strength = <2>;
 649
 650         /* Has external pullup */
 651         bias-disable;
 652 };
 653
 654 &tlmm {
 655         /*
 656          * The TZ seem to protect those because some boards can have
 657          * fingerprint sensor connected to this range. Not connected
 658          * on this board
 659          */
 660         gpio-reserved-ranges = <58 5>;
 661
 662         amp_sd_mode_default: amp-sd-mode-deault-state {
 663                 pins = "gpio23";
 664                 function = "gpio";
 665                 drive-strength = <16>;
 666                 bias-disable;
 667         };
 668
 669         bridge_en_default: bridge-en-default-state {
 670                 pins = "gpio51";
 671                 function = "gpio";
 672                 drive-strength = <16>;
 673                 bias-disable;
 674         };
 675
 676         bridge_suspend_default: bridge-suspend-default-state {
 677                 pins = "gpio22";
 678                 function = "gpio";
 679                 drive-strength = <16>;
 680                 bias-pull-up;
 681         };
 682
 683         codec_irq_default: codec-irq-deault-state {
 684                 pins = "gpio28";
 685                 function = "gpio";
 686                 drive-strength = <2>;
 687                 bias-disable;
 688         };
 689
 690         edp_bridge_irq_default: edp-bridge-irq-default-state {
 691                 pins = "gpio11";
 692                 function = "gpio";
 693                 drive-strength = <2>;
 694                 bias-pull-down;
 695         };
 696
 697         hid_keyboard_default: hid-keyboard-default-state {
 698                 pins = "gpio33";
 699                 function = "gpio";
 700                 drive-strength = <2>;
 701                 bias-disable;
 702         };
 703
 704         hid_touchpad_default: hid-touchpad-default-state {
 705                 pins = "gpio94";
 706                 function = "gpio";
 707                 drive-strength = <2>;
 708                 bias-disable;
 709         };
 710
 711         qup_uart3_sleep: qup-uart3-sleep-state {
 712                 cts-pins {
 713                         /*
 714                          * Configure a pull-down on CTS to match the pull of
 715                          * the Bluetooth module.
 716                          */
 717                         pins = "gpio38";
 718                         function = "gpio";
 719                         bias-pull-down;
 720                 };
 721
 722                 rts-pins {
 723                         /*
 724                          * Configure pull-down on RTS. As RTS is active low
 725                          * signal, pull it low to indicate the BT SoC that it
 726                          * can wakeup the system anytime from suspend state by
 727                          * pulling RX low (by sending wakeup bytes).
 728                          */
 729                         pins = "gpio39";
 730                         function = "gpio";
 731                         bias-pull-down;
 732                 };
 733
 734                 tx-pins {
 735                         /*
 736                          * Configure pull-up on TX when it isn't actively driven
 737                          * to prevent BT SoC from receiving garbage during sleep.
 738                          */
 739                         pins = "gpio40";
 740                         function = "gpio";
 741                         bias-pull-up;
 742                 };
 743
 744                 rx-pins {
 745                         /*
 746                          * Configure a pull-up on RX. This is needed to avoid
 747                          * garbage data when the TX pin of the Bluetooth module
 748                          * is floating which may cause spurious wakeups.
 749                          */
 750                         pins = "gpio41";
 751                         function = "gpio";
 752                         bias-pull-up;
 753                 };
 754         };
 755
 756         reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
 757                 pins = "gpio19";
 758                 function = "gpio";
 759                 drive-strength = <16>;
 760                 bias-disable;
 761         };
 762
 763         reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
 764                 pins = "gpio20";
 765                 function = "gpio";
 766                 drive-strength = <16>;
 767                 bias-disable;
 768         };
 769
 770         reg_lcm_en_default: reg-lcm-en-deault-state {
 771                 pins = "gpio26";
 772                 function = "gpio";
 773                 drive-strength = <16>;
 774                 bias-disable;
 775         };
 776
 777         reg_audio_en_default: reg-audio-en-deault-state {
 778                 pins = "gpio83";
 779                 function = "gpio";
 780                 drive-strength = <2>;
 781                 bias-disable;
 782         };
 783
 784         reg_tp_en_default: reg-tp-en-deault-state {
 785                 pins = "gpio25";
 786                 function = "gpio";
 787                 drive-strength = <2>;
 788                 bias-disable;
 789         };
 790
 791         soc_bkoff_default: soc-bkoff-deault-state {
 792                 pins = "gpio10";
 793                 function = "gpio";
 794                 drive-strength = <16>;
 795                 bias-disable;
 796         };
 797
 798         sdc1_default: sdc1-default-state {
 799                 clk-pins {
 800                         pins = "sdc1_clk";
 801                         drive-strength = <16>;
 802                         bias-disable;
 803                 };
 804
 805                 cmd-pins {
 806                         pins = "sdc1_cmd";
 807                         drive-strength = <16>;
 808                         bias-pull-up;
 809                 };
 810
 811                 data-pins {
 812                         pins = "sdc1_data";
 813                         drive-strength = <16>;
 814                         bias-pull-up;
 815                 };
 816
 817                 rclk-pins {
 818                         pins = "sdc1_rclk";
 819                         bias-pull-down;
 820                 };
 821         };
 822
 823         sdc1_sleep: sdc1-sleep-state {
 824                 clk-pins {
 825                         pins = "sdc1_clk";
 826                         drive-strength = <2>;
 827                         bias-disable;
 828                 };
 829
 830                 cmd-pins {
 831                         pins = "sdc1_cmd";
 832                         drive-strength = <2>;
 833                         bias-pull-up;
 834                 };
 835
 836                 data-pins {
 837                         pins = "sdc1_data";
 838                         drive-strength = <2>;
 839                         bias-pull-up;
 840                 };
 841
 842                 rclk-pins {
 843                         pins = "sdc1_rclk";
 844                         bias-pull-down;
 845                 };
 846         };
 847 };