arch/arm64/boot/dts/qcom/pm8998.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /* Copyright 2018 Google LLC. */
   3
   4 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   5 #include <dt-bindings/input/linux-event-codes.h>
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include <dt-bindings/spmi/spmi.h>
   8 #include <dt-bindings/thermal/thermal.h>
   9
  10 / {
  11         thermal-zones {
  12                 pm8998-thermal {
  13                         polling-delay-passive = <250>;
  14                         polling-delay = <1000>;
  15
  16                         thermal-sensors = <&pm8998_temp>;
  17
  18                         trips {
  19                                 pm8998_alert0: pm8998-alert0 {
  20                                         temperature = <105000>;
  21                                         hysteresis = <2000>;
  22                                         type = "passive";
  23                                 };
  24                                 pm8998_crit: pm8998-crit {
  25                                         temperature = <125000>;
  26                                         hysteresis = <2000>;
  27                                         type = "critical";
  28                                 };
  29                         };
  30                 };
  31         };
  32 };
  33
  34 &spmi_bus {
  35         pm8998_lsid0: pmic@0 {
  36                 compatible = "qcom,pm8998", "qcom,spmi-pmic";
  37                 reg = <0x0 SPMI_USID>;
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 pm8998_pon: pon@800 {
  42                         compatible = "qcom,pm8998-pon";
  43
  44                         reg = <0x800>;
  45                         mode-bootloader = <0x2>;
  46                         mode-recovery = <0x1>;
  47
  48                         pm8998_pwrkey: pwrkey {
  49                                 compatible = "qcom,pm8941-pwrkey";
  50                                 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  51                                 debounce = <15625>;
  52                                 bias-pull-up;
  53                                 linux,code = <KEY_POWER>;
  54                         };
  55
  56                         pm8998_resin: resin {
  57                                 compatible = "qcom,pm8941-resin";
  58                                 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
  59                                 debounce = <15625>;
  60                                 bias-pull-up;
  61                                 status = "disabled";
  62                         };
  63                 };
  64
  65                 pm8998_temp: temp-alarm@2400 {
  66                         compatible = "qcom,spmi-temp-alarm";
  67                         reg = <0x2400>;
  68                         interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
  69                         io-channels = <&pm8998_adc ADC5_DIE_TEMP>;
  70                         io-channel-names = "thermal";
  71                         #thermal-sensor-cells = <0>;
  72                 };
  73
  74                 pm8998_coincell: charger@2800 {
  75                         compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell";
  76                         reg = <0x2800>;
  77
  78                         status = "disabled";
  79                 };
  80
  81                 pm8998_adc: adc@3100 {
  82                         compatible = "qcom,spmi-adc-rev2";
  83                         reg = <0x3100>;
  84                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  85                         #address-cells = <1>;
  86                         #size-cells = <0>;
  87                         #io-channel-cells = <1>;
  88
  89                         channel@6 {
  90                                 reg = <ADC5_DIE_TEMP>;
  91                                 label = "die_temp";
  92                         };
  93                 };
  94
  95                 pm8998_adc_tm: adc-tm@3400 {
  96                         compatible = "qcom,spmi-adc-tm-hc";
  97                         reg = <0x3400>;
  98                         interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
  99                         #thermal-sensor-cells = <1>;
 100                         #address-cells = <1>;
 101                         #size-cells = <0>;
 102                         status = "disabled";
 103                 };
 104
 105                 rtc@6000 {
 106                         compatible = "qcom,pm8941-rtc";
 107                         reg = <0x6000>, <0x6100>;
 108                         reg-names = "rtc", "alarm";
 109                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 110                 };
 111
 112                 pm8998_gpios: gpio@c000 {
 113                         compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio";
 114                         reg = <0xc000>;
 115                         gpio-controller;
 116                         gpio-ranges = <&pm8998_gpios 0 0 26>;
 117                         #gpio-cells = <2>;
 118                         interrupt-controller;
 119                         #interrupt-cells = <2>;
 120                 };
 121
 122         };
 123
 124         pm8998_lsid1: pmic@1 {
 125                 compatible = "qcom,pm8998", "qcom,spmi-pmic";
 126                 reg = <0x1 SPMI_USID>;
 127                 #address-cells = <1>;
 128                 #size-cells = <0>;
 129         };
 130 };