arch/arm64/boot/dts/qcom/pm8550vs.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Linaro Limited
   4  */
   5
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include <dt-bindings/spmi/spmi.h>
   8
   9 / {
  10         thermal-zones {
  11                 pm8550vs-c-thermal {
  12                         polling-delay-passive = <100>;
  13                         polling-delay = <0>;
  14
  15                         thermal-sensors = <&pm8550vs_c_temp_alarm>;
  16
  17                         trips {
  18                                 trip0 {
  19                                         temperature = <95000>;
  20                                         hysteresis = <0>;
  21                                         type = "passive";
  22                                 };
  23
  24                                 trip1 {
  25                                         temperature = <115000>;
  26                                         hysteresis = <0>;
  27                                         type = "hot";
  28                                 };
  29                         };
  30                 };
  31
  32                 pm8550vs-d-thermal {
  33                         polling-delay-passive = <100>;
  34                         polling-delay = <0>;
  35
  36                         thermal-sensors = <&pm8550vs_d_temp_alarm>;
  37
  38                         trips {
  39                                 trip0 {
  40                                         temperature = <95000>;
  41                                         hysteresis = <0>;
  42                                         type = "passive";
  43                                 };
  44
  45                                 trip1 {
  46                                         temperature = <115000>;
  47                                         hysteresis = <0>;
  48                                         type = "hot";
  49                                 };
  50                         };
  51                 };
  52
  53                 pm8550vs-e-thermal {
  54                         polling-delay-passive = <100>;
  55                         polling-delay = <0>;
  56
  57                         thermal-sensors = <&pm8550vs_e_temp_alarm>;
  58
  59                         trips {
  60                                 trip0 {
  61                                         temperature = <95000>;
  62                                         hysteresis = <0>;
  63                                         type = "passive";
  64                                 };
  65
  66                                 trip1 {
  67                                         temperature = <115000>;
  68                                         hysteresis = <0>;
  69                                         type = "hot";
  70                                 };
  71                         };
  72                 };
  73
  74                 pm8550vs-g-thermal {
  75                         polling-delay-passive = <100>;
  76                         polling-delay = <0>;
  77
  78                         thermal-sensors = <&pm8550vs_g_temp_alarm>;
  79
  80                         trips {
  81                                 trip0 {
  82                                         temperature = <95000>;
  83                                         hysteresis = <0>;
  84                                         type = "passive";
  85                                 };
  86
  87                                 trip1 {
  88                                         temperature = <115000>;
  89                                         hysteresis = <0>;
  90                                         type = "hot";
  91                                 };
  92                         };
  93                 };
  94         };
  95 };
  96
  97
  98 &spmi_bus {
  99         pm8550vs_c: pmic@2 {
 100                 compatible = "qcom,pm8550", "qcom,spmi-pmic";
 101                 reg = <0x2 SPMI_USID>;
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104
 105                 pm8550vs_c_temp_alarm: temp-alarm@a00 {
 106                         compatible = "qcom,spmi-temp-alarm";
 107                         reg = <0xa00>;
 108                         interrupts = <0x2 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 109                         #thermal-sensor-cells = <0>;
 110                 };
 111
 112                 pm8550vs_c_gpios: gpio@8800 {
 113                         compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
 114                         reg = <0x8800>;
 115                         gpio-controller;
 116                         gpio-ranges = <&pm8550vs_c_gpios 0 0 6>;
 117                         #gpio-cells = <2>;
 118                         interrupt-controller;
 119                         #interrupt-cells = <2>;
 120                 };
 121         };
 122
 123         pm8550vs_d: pmic@3 {
 124                 compatible = "qcom,pm8550", "qcom,spmi-pmic";
 125                 reg = <0x3 SPMI_USID>;
 126                 #address-cells = <1>;
 127                 #size-cells = <0>;
 128
 129                 pm8550vs_d_temp_alarm: temp-alarm@a00 {
 130                         compatible = "qcom,spmi-temp-alarm";
 131                         reg = <0xa00>;
 132                         interrupts = <0x3 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 133                         #thermal-sensor-cells = <0>;
 134                 };
 135
 136                 pm8550vs_d_gpios: gpio@8800 {
 137                         compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
 138                         reg = <0x8800>;
 139                         gpio-controller;
 140                         gpio-ranges = <&pm8550vs_d_gpios 0 0 6>;
 141                         #gpio-cells = <2>;
 142                         interrupt-controller;
 143                         #interrupt-cells = <2>;
 144                 };
 145         };
 146
 147         pm8550vs_e: pmic@4 {
 148                 compatible = "qcom,pm8550", "qcom,spmi-pmic";
 149                 reg = <0x4 SPMI_USID>;
 150                 #address-cells = <1>;
 151                 #size-cells = <0>;
 152
 153                 pm8550vs_e_temp_alarm: temp-alarm@a00 {
 154                         compatible = "qcom,spmi-temp-alarm";
 155                         reg = <0xa00>;
 156                         interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 157                         #thermal-sensor-cells = <0>;
 158                 };
 159
 160                 pm8550vs_e_gpios: gpio@8800 {
 161                         compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
 162                         reg = <0x8800>;
 163                         gpio-controller;
 164                         gpio-ranges = <&pm8550vs_e_gpios 0 0 6>;
 165                         #gpio-cells = <2>;
 166                         interrupt-controller;
 167                         #interrupt-cells = <2>;
 168                 };
 169         };
 170
 171         pm8550vs_g: pmic@6 {
 172                 compatible = "qcom,pm8550", "qcom,spmi-pmic";
 173                 reg = <0x6 SPMI_USID>;
 174                 #address-cells = <1>;
 175                 #size-cells = <0>;
 176
 177                 pm8550vs_g_temp_alarm: temp-alarm@a00 {
 178                         compatible = "qcom,spmi-temp-alarm";
 179                         reg = <0xa00>;
 180                         interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
 181                         #thermal-sensor-cells = <0>;
 182                 };
 183
 184                 pm8550vs_g_gpios: gpio@8800 {
 185                         compatible = "qcom,pm8550vs-gpio", "qcom,spmi-gpio";
 186                         reg = <0x8800>;
 187                         gpio-controller;
 188                         gpio-ranges = <&pm8550vs_g_gpios 0 0 6>;
 189                         #gpio-cells = <2>;
 190                         interrupt-controller;
 191                         #interrupt-cells = <2>;
 192                 };
 193         };
 194 };