arch/arm64/boot/dts/qcom/pm8150b.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2019, Linaro Limited
   5  */
   6
   7 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include <dt-bindings/spmi/spmi.h>
  10
  11 / {
  12         thermal-zones {
  13                 pm8150b-thermal {
  14                         polling-delay-passive = <100>;
  15                         polling-delay = <0>;
  16
  17                         thermal-sensors = <&pm8150b_temp>;
  18
  19                         trips {
  20                                 trip0 {
  21                                         temperature = <95000>;
  22                                         hysteresis = <0>;
  23                                         type = "passive";
  24                                 };
  25
  26                                 trip1 {
  27                                         temperature = <115000>;
  28                                         hysteresis = <0>;
  29                                         type = "hot";
  30                                 };
  31
  32                                 trip2 {
  33                                         temperature = <145000>;
  34                                         hysteresis = <0>;
  35                                         type = "critical";
  36                                 };
  37                         };
  38                 };
  39         };
  40 };
  41
  42 &spmi_bus {
  43         pmic@2 {
  44                 compatible = "qcom,pm8150b", "qcom,spmi-pmic";
  45                 reg = <0x2 SPMI_USID>;
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48
  49                 pon@800 {
  50                         compatible = "qcom,pm8916-pon";
  51                         reg = <0x0800>;
  52
  53                         status = "disabled";
  54                 };
  55
  56                 pm8150b_vbus: usb-vbus-regulator@1100 {
  57                         compatible = "qcom,pm8150b-vbus-reg";
  58                         status = "disabled";
  59                         reg = <0x1100>;
  60                 };
  61
  62                 pm8150b_typec: typec@1500 {
  63                         compatible = "qcom,pm8150b-typec";
  64                         status = "disabled";
  65                         reg = <0x1500>,
  66                               <0x1700>;
  67                         interrupts = <0x2 0x15 0x00 IRQ_TYPE_EDGE_RISING>,
  68                                      <0x2 0x15 0x01 IRQ_TYPE_EDGE_BOTH>,
  69                                      <0x2 0x15 0x02 IRQ_TYPE_EDGE_RISING>,
  70                                      <0x2 0x15 0x03 IRQ_TYPE_EDGE_BOTH>,
  71                                      <0x2 0x15 0x04 IRQ_TYPE_EDGE_RISING>,
  72                                      <0x2 0x15 0x05 IRQ_TYPE_EDGE_RISING>,
  73                                      <0x2 0x15 0x06 IRQ_TYPE_EDGE_BOTH>,
  74                                      <0x2 0x15 0x07 IRQ_TYPE_EDGE_RISING>,
  75                                      <0x2 0x17 0x00 IRQ_TYPE_EDGE_RISING>,
  76                                      <0x2 0x17 0x01 IRQ_TYPE_EDGE_RISING>,
  77                                      <0x2 0x17 0x02 IRQ_TYPE_EDGE_RISING>,
  78                                      <0x2 0x17 0x03 IRQ_TYPE_EDGE_RISING>,
  79                                      <0x2 0x17 0x04 IRQ_TYPE_EDGE_RISING>,
  80                                      <0x2 0x17 0x05 IRQ_TYPE_EDGE_RISING>,
  81                                      <0x2 0x17 0x06 IRQ_TYPE_EDGE_RISING>,
  82                                      <0x2 0x17 0x07 IRQ_TYPE_EDGE_RISING>;
  83                         interrupt-names = "or-rid-detect-change",
  84                                           "vpd-detect",
  85                                           "cc-state-change",
  86                                           "vconn-oc",
  87                                           "vbus-change",
  88                                           "attach-detach",
  89                                           "legacy-cable-detect",
  90                                           "try-snk-src-detect",
  91                                           "sig-tx",
  92                                           "sig-rx",
  93                                           "msg-tx",
  94                                           "msg-rx",
  95                                           "msg-tx-failed",
  96                                           "msg-tx-discarded",
  97                                           "msg-rx-discarded",
  98                                           "fr-swap";
  99                         vdd-vbus-supply = <&pm8150b_vbus>;
 100                 };
 101
 102                 pm8150b_temp: temp-alarm@2400 {
 103                         compatible = "qcom,spmi-temp-alarm";
 104                         reg = <0x2400>;
 105                         interrupts = <0x2 0x24 0x0 IRQ_TYPE_EDGE_BOTH>;
 106                         io-channels = <&pm8150b_adc ADC5_DIE_TEMP>;
 107                         io-channel-names = "thermal";
 108                         #thermal-sensor-cells = <0>;
 109                 };
 110
 111                 pm8150b_adc: adc@3100 {
 112                         compatible = "qcom,spmi-adc5";
 113                         reg = <0x3100>;
 114                         #address-cells = <1>;
 115                         #size-cells = <0>;
 116                         #io-channel-cells = <1>;
 117                         interrupts = <0x2 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
 118
 119                         channel@0 {
 120                                 reg = <ADC5_REF_GND>;
 121                                 qcom,pre-scaling = <1 1>;
 122                                 label = "ref_gnd";
 123                         };
 124
 125                         channel@1 {
 126                                 reg = <ADC5_1P25VREF>;
 127                                 qcom,pre-scaling = <1 1>;
 128                                 label = "vref_1p25";
 129                         };
 130
 131                         channel@6 {
 132                                 reg = <ADC5_DIE_TEMP>;
 133                                 qcom,pre-scaling = <1 1>;
 134                                 label = "die_temp";
 135                         };
 136
 137                         channel@9 {
 138                                 reg = <ADC5_CHG_TEMP>;
 139                                 qcom,pre-scaling = <1 1>;
 140                                 label = "chg_temp";
 141                         };
 142                 };
 143
 144                 pm8150b_adc_tm: adc-tm@3500 {
 145                         compatible = "qcom,spmi-adc-tm5";
 146                         reg = <0x3500>;
 147                         interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 148                         #thermal-sensor-cells = <1>;
 149                         #address-cells = <1>;
 150                         #size-cells = <0>;
 151                         status = "disabled";
 152                 };
 153
 154                 pm8150b_gpios: gpio@c000 {
 155                         compatible = "qcom,pm8150b-gpio", "qcom,spmi-gpio";
 156                         reg = <0xc000>;
 157                         gpio-controller;
 158                         gpio-ranges = <&pm8150b_gpios 0 0 12>;
 159                         #gpio-cells = <2>;
 160                         interrupt-controller;
 161                         #interrupt-cells = <2>;
 162                 };
 163         };
 164
 165         pmic@3 {
 166                 compatible = "qcom,pm8150b", "qcom,spmi-pmic";
 167                 reg = <0x3 SPMI_USID>;
 168                 #address-cells = <1>;
 169                 #size-cells = <0>;
 170
 171                 pm8150b_lpg: pwm {
 172                         compatible = "qcom,pm8150b-lpg";
 173
 174                         #address-cells = <1>;
 175                         #size-cells = <0>;
 176                         #pwm-cells = <2>;
 177
 178                         status = "disabled";
 179                 };
 180         };
 181 };