1 // SPDX-License-Identifier: BSD-3-Clause
3 * Copyright (c) 2020, Konrad Dybcio
6 #include <dt-bindings/iio/qcom,spmi-vadc.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/interrupt-controller/irq.h>
9 #include <dt-bindings/spmi/spmi.h>
10 #include <dt-bindings/thermal/thermal.h>
15 polling-delay-passive = <250>;
16 polling-delay = <1000>;
18 thermal-sensors = <&pm660_temp>;
21 pm660_alert0: pm660-alert0 {
22 temperature = <95000>;
26 pm660_crit: pm660-crit {
27 temperature = <125000>;
39 compatible = "qcom,pm660", "qcom,spmi-pmic";
40 reg = <0x0 SPMI_USID>;
45 compatible = "qcom,pm8941-rtc";
46 reg = <0x6000>, <0x6100>;
47 reg-names = "rtc", "alarm";
48 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
52 compatible = "qcom,pm8998-pon";
54 mode-bootloader = <0x2>;
55 mode-recovery = <0x1>;
58 compatible = "qcom,pm8941-pwrkey";
59 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
62 linux,code = <KEY_POWER>;
68 compatible = "qcom,pm8941-resin";
69 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
77 pm660_temp: temp-alarm@2400 {
78 compatible = "qcom,spmi-temp-alarm";
80 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
81 io-channels = <&pm660_adc ADC5_DIE_TEMP>;
82 io-channel-names = "thermal";
83 #thermal-sensor-cells = <0>;
87 compatible = "qcom,spmi-adc-rev2";
89 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
92 #io-channel-cells = <1>;
96 qcom,decimation = <1024>;
97 qcom,pre-scaling = <1 1>;
100 vref_1p25: vref_1p25@1 {
101 reg = <ADC5_1P25VREF>;
102 qcom,decimation = <1024>;
103 qcom,pre-scaling = <1 1>;
106 die_temp: die_temp@6 {
107 reg = <ADC5_DIE_TEMP>;
108 qcom,decimation = <1024>;
109 qcom,pre-scaling = <1 1>;
112 xo_therm: xo_therm@4c {
113 reg = <ADC5_XO_THERM_100K_PU>;
114 qcom,pre-scaling = <1 1>;
115 qcom,decimation = <1024>;
116 qcom,hw-settle-time = <200>;
120 msm_therm: msm_therm@4d {
121 reg = <ADC5_AMUX_THM1_100K_PU>;
122 qcom,pre-scaling = <1 1>;
123 qcom,decimation = <1024>;
124 qcom,hw-settle-time = <200>;
128 emmc_therm: emmc_therm@4e {
129 reg = <ADC5_AMUX_THM2_100K_PU>;
130 qcom,pre-scaling = <1 1>;
131 qcom,decimation = <1024>;
132 qcom,hw-settle-time = <200>;
136 pa_therm0: thermistor0@4f {
137 reg = <ADC5_AMUX_THM3_100K_PU>;
138 qcom,pre-scaling = <1 1>;
139 qcom,decimation = <1024>;
140 qcom,hw-settle-time = <200>;
144 pa_therm1: thermistor1@50 {
145 reg = <ADC5_AMUX_THM4_100K_PU>;
146 qcom,pre-scaling = <1 1>;
147 qcom,decimation = <1024>;
148 qcom,hw-settle-time = <200>;
152 quiet_therm: quiet_therm@51 {
153 reg = <ADC5_AMUX_THM5_100K_PU>;
154 qcom,pre-scaling = <1 1>;
155 qcom,decimation = <1024>;
156 qcom,hw-settle-time = <200>;
160 vadc_vph_pwr: vph_pwr@83 {
161 reg = <ADC5_VPH_PWR>;
162 qcom,decimation = <1024>;
163 qcom,pre-scaling = <1 3>;
168 qcom,decimation = <1024>;
169 qcom,pre-scaling = <1 3>;
173 pm660_gpios: gpios@c000 {
174 compatible = "qcom,pm660-gpio", "qcom,spmi-gpio";
177 gpio-ranges = <&pm660_gpios 0 0 13>;
179 interrupt-controller;
180 #interrupt-cells = <2>;
185 compatible = "qcom,pm660", "qcom,spmi-pmic";
186 reg = <0x1 SPMI_USID>;
187 #address-cells = <1>;
190 pm660_spmi_regulators: regulators {
191 compatible = "qcom,pm660-regulators";