arch/arm64/boot/dts/qcom/pm6150.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2019, The Linux Foundation. All rights reserved.
   4  */
   5
   6 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   7 #include <dt-bindings/input/linux-event-codes.h>
   8 #include <dt-bindings/interrupt-controller/irq.h>
   9 #include <dt-bindings/spmi/spmi.h>
  10 #include <dt-bindings/thermal/thermal.h>
  11
  12 / {
  13         thermal-zones {
  14                 pm6150_thermal: pm6150-thermal {
  15                         polling-delay-passive = <100>;
  16                         polling-delay = <0>;
  17                         thermal-sensors = <&pm6150_temp>;
  18
  19                         trips {
  20                                 pm6150_trip0: trip0 {
  21                                         temperature = <95000>;
  22                                         hysteresis = <0>;
  23                                         type = "passive";
  24                                 };
  25
  26                                 pm6150_crit: crit {
  27                                         temperature = <115000>;
  28                                         hysteresis = <0>;
  29                                         type = "critical";
  30                                 };
  31                         };
  32                 };
  33         };
  34 };
  35
  36 &spmi_bus {
  37         pm6150_lsid0: pmic@0 {
  38                 compatible = "qcom,pm6150", "qcom,spmi-pmic";
  39                 reg = <0x0 SPMI_USID>;
  40                 #address-cells = <1>;
  41                 #size-cells = <0>;
  42
  43                 pm6150_pon: pon@800 {
  44                         compatible = "qcom,pm8998-pon";
  45                         reg = <0x800>;
  46                         mode-bootloader = <0x2>;
  47                         mode-recovery = <0x1>;
  48
  49                         pm6150_pwrkey: pwrkey {
  50                                 compatible = "qcom,pm8941-pwrkey";
  51                                 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
  52                                 debounce = <15625>;
  53                                 bias-pull-up;
  54                                 linux,code = <KEY_POWER>;
  55                         };
  56
  57                         pm6150_resin: resin {
  58                                 compatible = "qcom,pm8941-resin";
  59                                 interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
  60                                 debounce = <15625>;
  61                                 bias-pull-up;
  62                                 status = "disabled";
  63                         };
  64                 };
  65
  66                 pm6150_temp: temp-alarm@2400 {
  67                         compatible = "qcom,spmi-temp-alarm";
  68                         reg = <0x2400>;
  69                         interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
  70                         io-channels = <&pm6150_adc ADC5_DIE_TEMP>;
  71                         io-channel-names = "thermal";
  72                         #thermal-sensor-cells = <0>;
  73                 };
  74
  75                 pm6150_adc: adc@3100 {
  76                         compatible = "qcom,spmi-adc5";
  77                         reg = <0x3100>;
  78                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  79                         #address-cells = <1>;
  80                         #size-cells = <0>;
  81                         #io-channel-cells = <1>;
  82
  83                         channel@6 {
  84                                 reg = <ADC5_DIE_TEMP>;
  85                                 label = "die_temp";
  86                         };
  87                 };
  88
  89                 pm6150_adc_tm: adc-tm@3500 {
  90                         compatible = "qcom,spmi-adc-tm5";
  91                         reg = <0x3500>;
  92                         interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
  93                         #thermal-sensor-cells = <1>;
  94                         #address-cells = <1>;
  95                         #size-cells = <0>;
  96                         status = "disabled";
  97                 };
  98
  99                 pm6150_rtc: rtc@6000 {
 100                         compatible = "qcom,pm8941-rtc";
 101                         reg = <0x6000>, <0x6100>;
 102                         reg-names = "rtc", "alarm";
 103                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 104                         status = "disabled";
 105                 };
 106
 107                 pm6150_gpios: gpio@c000 {
 108                         compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 109                         reg = <0xc000>;
 110                         gpio-controller;
 111                         gpio-ranges = <&pm6150_gpios 0 0 10>;
 112                         #gpio-cells = <2>;
 113                         interrupt-controller;
 114                         #interrupt-cells = <2>;
 115                 };
 116         };
 117
 118         pm6150_lsid1: pmic@1 {
 119                 compatible = "qcom,pm6150", "qcom,spmi-pmic";
 120                 reg = <0x1 SPMI_USID>;
 121                 #address-cells = <1>;
 122                 #size-cells = <0>;
 123         };
 124 };