arch/arm64/boot/dts/qcom/pm6125.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2
   3 #include <dt-bindings/iio/qcom,spmi-vadc.h>
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/input/linux-event-codes.h>
   6 #include <dt-bindings/interrupt-controller/irq.h>
   7 #include <dt-bindings/spmi/spmi.h>
   8
   9 / {
  10         thermal-zones {
  11                 pm6125-thermal {
  12                         polling-delay-passive = <100>;
  13                         polling-delay = <0>;
  14
  15                         thermal-sensors = <&pm6125_temp>;
  16
  17                         trips {
  18                                 trip0 {
  19                                         temperature = <95000>;
  20                                         hysteresis = <0>;
  21                                         type = "passive";
  22                                 };
  23
  24                                 trip1 {
  25                                         temperature = <115000>;
  26                                         hysteresis = <0>;
  27                                         type = "hot";
  28                                 };
  29
  30                                 trip2 {
  31                                         temperature = <145000>;
  32                                         hysteresis = <0>;
  33                                         type = "critical";
  34                                 };
  35                         };
  36                 };
  37         };
  38 };
  39
  40 &spmi_bus {
  41         pmic@0 {
  42                 compatible = "qcom,pm6125", "qcom,spmi-pmic";
  43                 reg = <0x0 SPMI_USID>;
  44                 #address-cells = <1>;
  45                 #size-cells = <0>;
  46
  47                 pm6125_pon: pon@800 {
  48                         compatible = "qcom,pm8998-pon";
  49                         reg = <0x800>;
  50                         mode-bootloader = <0x2>;
  51                         mode-recovery = <0x1>;
  52
  53                         pon_pwrkey: pwrkey {
  54                                 compatible = "qcom,pm8941-pwrkey";
  55                                 interrupts = <0x0 0x8 0x0 IRQ_TYPE_EDGE_BOTH>;
  56                                 debounce = <15625>;
  57                                 linux,code = <KEY_POWER>;
  58                                 bias-pull-up;
  59                                 status = "disabled";
  60                         };
  61
  62                         pon_resin: resin {
  63                                 compatible = "qcom,pm8941-resin";
  64                                 interrupts = <0x0 0x8 0x1 IRQ_TYPE_EDGE_BOTH>;
  65                                 debounce = <15625>;
  66                                 bias-pull-up;
  67                                 status = "disabled";
  68                         };
  69                 };
  70
  71                 pm6125_temp: temp-alarm@2400 {
  72                         compatible = "qcom,spmi-temp-alarm";
  73                         reg = <0x2400>;
  74                         interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;
  75                         io-channels = <&pm6125_adc ADC5_DIE_TEMP>;
  76                         io-channel-names = "thermal";
  77                         #thermal-sensor-cells = <0>;
  78                 };
  79
  80                 pm6125_adc: adc@3100 {
  81                         compatible = "qcom,spmi-adc5";
  82                         reg = <0x3100>;
  83                         #address-cells = <1>;
  84                         #size-cells = <0>;
  85                         interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
  86                         #io-channel-cells = <1>;
  87
  88                         channel@0 {
  89                                 reg = <ADC5_REF_GND>;
  90                                 qcom,pre-scaling = <1 1>;
  91                                 label = "ref_gnd";
  92                         };
  93
  94                         channel@1 {
  95                                 reg = <ADC5_1P25VREF>;
  96                                 qcom,pre-scaling = <1 1>;
  97                                 label = "vref_1p25";
  98                         };
  99
 100                         channel@6 {
 101                                 reg = <ADC5_DIE_TEMP>;
 102                                 qcom,pre-scaling = <1 1>;
 103                                 label = "die_temp";
 104                         };
 105
 106                         channel@83 {
 107                                 reg = <ADC5_VPH_PWR>;
 108                                 qcom,pre-scaling = <1 3>;
 109                                 label = "vph_pwr";
 110                         };
 111
 112                         channel@85 {
 113                                 reg = <ADC5_VCOIN>;
 114                                 qcom,pre-scaling = <1 3>;
 115                                 label = "vcoin";
 116                         };
 117
 118                         channel@4c {
 119                                 reg = <ADC5_XO_THERM_100K_PU>;
 120                                 qcom,pre-scaling = <1 1>;
 121                                 qcom,hw-settle-time = <200>;
 122                                 qcom,ratiometric;
 123                                 label = "xo_therm";
 124                         };
 125                 };
 126
 127                 pm6125_adc_tm: adc-tm@3500 {
 128                         compatible = "qcom,spmi-adc-tm5";
 129                         reg = <0x3500>;
 130                         interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
 131                         #address-cells = <1>;
 132                         #size-cells = <0>;
 133                         #thermal-sensor-cells = <1>;
 134                         status = "disabled";
 135                 };
 136
 137                 pm6125_rtc: rtc@6000 {
 138                         compatible = "qcom,pm8941-rtc";
 139                         reg = <0x6000>, <0x6100>;
 140                         reg-names = "rtc", "alarm";
 141                         interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 142                         status = "disabled";
 143                 };
 144
 145                 pm6125_gpios: gpio@c000 {
 146                         compatible = "qcom,pm6125-gpio", "qcom,spmi-gpio";
 147                         reg = <0xc000>;
 148                         gpio-controller;
 149                         gpio-ranges = <&pm6125_gpios 0 0 9>;
 150                         #gpio-cells = <2>;
 151                         interrupt-controller;
 152                         #interrupt-cells = <2>;
 153                 };
 154         };
 155
 156         pmic@1 {
 157                 compatible = "qcom,pm6125", "qcom,spmi-pmic";
 158                 reg = <0x1 SPMI_USID>;
 159         };
 160 };