arch/arm64/boot/dts/qcom/msm8998-mtp.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */
   3
   4 /dts-v1/;
   5
   6 #include "msm8998.dtsi"
   7 #include "pm8005.dtsi"
   8 #include "pm8998.dtsi"
   9 #include "pmi8998.dtsi"
  10
  11 / {
  12         model = "Qualcomm Technologies, Inc. MSM8998 v1 MTP";
  13         compatible = "qcom,msm8998-mtp", "qcom,msm8998";
  14
  15         qcom,board-id = <8 0>;
  16
  17         aliases {
  18                 serial0 = &blsp2_uart1;
  19                 serial1 = &blsp1_uart3;
  20         };
  21
  22         chosen {
  23                 stdout-path = "serial0:115200n8";
  24         };
  25
  26         vph_pwr: vph-pwr-regulator {
  27                 compatible = "regulator-fixed";
  28                 regulator-name = "vph_pwr";
  29                 regulator-always-on;
  30                 regulator-boot-on;
  31         };
  32 };
  33
  34 &blsp1_uart3 {
  35         status = "okay";
  36
  37         bluetooth {
  38                 compatible = "qcom,wcn3990-bt";
  39
  40                 vddio-supply = <&vreg_s4a_1p8>;
  41                 vddxo-supply = <&vreg_l7a_1p8>;
  42                 vddrf-supply = <&vreg_l17a_1p3>;
  43                 vddch0-supply = <&vreg_l25a_3p3>;
  44                 max-speed = <3200000>;
  45         };
  46 };
  47
  48 &blsp1_uart3_on {
  49         rx {
  50                 /delete-property/ bias-disable;
  51                 /*
  52                  * Configure a pull-up on 45 (RX). This is needed to
  53                  * avoid garbage data when the TX pin of the Bluetooth
  54                  * module is in tri-state (module powered off or not
  55                  * driving the signal yet).
  56                  */
  57                 bias-pull-up;
  58         };
  59
  60         cts {
  61                 /delete-property/ bias-disable;
  62                 /*
  63                  * Configure a pull-down on 47 (CTS) to match the pull
  64                  * of the Bluetooth module.
  65                  */
  66                 bias-pull-down;
  67         };
  68 };
  69
  70 &blsp2_uart1 {
  71         status = "okay";
  72 };
  73
  74 &etf {
  75         status = "okay";
  76 };
  77
  78 &etm1 {
  79         status = "okay";
  80 };
  81
  82 &etm2 {
  83         status = "okay";
  84 };
  85
  86 &etm3 {
  87         status = "okay";
  88 };
  89
  90 &etm4 {
  91         status = "okay";
  92 };
  93
  94 &etm5 {
  95         status = "okay";
  96 };
  97
  98 &etm6 {
  99         status = "okay";
 100 };
 101
 102 &etm7 {
 103         status = "okay";
 104 };
 105
 106 &etm8 {
 107         status = "okay";
 108 };
 109
 110 &etr {
 111         status = "okay";
 112 };
 113
 114 &funnel1 {
 115         status = "okay";
 116 };
 117
 118 &funnel2 {
 119         status = "okay";
 120 };
 121
 122 &funnel3 {
 123         status = "okay";
 124 };
 125
 126 &funnel4 {
 127         // FIXME: Figure out why clock late_initcall crashes the board with
 128         // this enabled.
 129         // status = "okay";
 130 };
 131
 132 &funnel5 {
 133         // FIXME: Figure out why clock late_initcall crashes the board with
 134         // this enabled.
 135         // status = "okay";
 136 };
 137
 138 &pcie0 {
 139         status = "okay";
 140 };
 141
 142 &pcie_phy {
 143         status = "okay";
 144 };
 145
 146 &pm8005_regulators {
 147         vdd_s1-supply = <&vph_pwr>;
 148
 149         pm8005_s1: s1 { /* VDD_GFX supply */
 150                 regulator-min-microvolt = <524000>;
 151                 regulator-max-microvolt = <1100000>;
 152                 regulator-enable-ramp-delay = <500>;
 153
 154                 /* Hack until we rig up the gpu consumer */
 155                 regulator-always-on;
 156         };
 157 };
 158
 159 &qusb2phy {
 160         status = "okay";
 161
 162         vdda-pll-supply = <&vreg_l12a_1p8>;
 163         vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
 164 };
 165
 166 &replicator1 {
 167         status = "okay";
 168 };
 169
 170 &rpm_requests {
 171         pm8998-regulators {
 172                 compatible = "qcom,rpm-pm8998-regulators";
 173
 174                 vdd_s1-supply = <&vph_pwr>;
 175                 vdd_s2-supply = <&vph_pwr>;
 176                 vdd_s3-supply = <&vph_pwr>;
 177                 vdd_s4-supply = <&vph_pwr>;
 178                 vdd_s5-supply = <&vph_pwr>;
 179                 vdd_s6-supply = <&vph_pwr>;
 180                 vdd_s7-supply = <&vph_pwr>;
 181                 vdd_s8-supply = <&vph_pwr>;
 182                 vdd_s9-supply = <&vph_pwr>;
 183                 vdd_s10-supply = <&vph_pwr>;
 184                 vdd_s11-supply = <&vph_pwr>;
 185                 vdd_s12-supply = <&vph_pwr>;
 186                 vdd_s13-supply = <&vph_pwr>;
 187                 vdd_l1_l27-supply = <&vreg_s7a_1p025>;
 188                 vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
 189                 vdd_l3_l11-supply = <&vreg_s7a_1p025>;
 190                 vdd_l4_l5-supply = <&vreg_s7a_1p025>;
 191                 vdd_l6-supply = <&vreg_s5a_2p04>;
 192                 vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
 193                 vdd_l9-supply = <&vreg_bob>;
 194                 vdd_l10_l23_l25-supply = <&vreg_bob>;
 195                 vdd_l13_l19_l21-supply = <&vreg_bob>;
 196                 vdd_l16_l28-supply = <&vreg_bob>;
 197                 vdd_l18_l22-supply = <&vreg_bob>;
 198                 vdd_l20_l24-supply = <&vreg_bob>;
 199                 vdd_l26-supply = <&vreg_s3a_1p35>;
 200                 vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
 201
 202                 vreg_s3a_1p35: s3 {
 203                         regulator-min-microvolt = <1352000>;
 204                         regulator-max-microvolt = <1352000>;
 205                 };
 206
 207                 vreg_s4a_1p8: s4 {
 208                         regulator-min-microvolt = <1800000>;
 209                         regulator-max-microvolt = <1800000>;
 210                         regulator-allow-set-load;
 211                 };
 212
 213                 vreg_s5a_2p04: s5 {
 214                         regulator-min-microvolt = <1904000>;
 215                         regulator-max-microvolt = <2040000>;
 216                 };
 217
 218                 vreg_s7a_1p025: s7 {
 219                         regulator-min-microvolt = <900000>;
 220                         regulator-max-microvolt = <1028000>;
 221                 };
 222
 223                 vreg_l1a_0p875: l1 {
 224                         regulator-min-microvolt = <880000>;
 225                         regulator-max-microvolt = <880000>;
 226                 };
 227
 228                 vreg_l2a_1p2: l2 {
 229                         regulator-min-microvolt = <1200000>;
 230                         regulator-max-microvolt = <1200000>;
 231                 };
 232
 233                 vreg_l3a_1p0: l3 {
 234                         regulator-min-microvolt = <1000000>;
 235                         regulator-max-microvolt = <1000000>;
 236                 };
 237
 238                 vreg_l5a_0p8: l5 {
 239                         regulator-min-microvolt = <800000>;
 240                         regulator-max-microvolt = <800000>;
 241                 };
 242
 243                 vreg_l6a_1p8: l6 {
 244                         regulator-min-microvolt = <1808000>;
 245                         regulator-max-microvolt = <1808000>;
 246                 };
 247
 248                 vreg_l7a_1p8: l7 {
 249                         regulator-min-microvolt = <1800000>;
 250                         regulator-max-microvolt = <1800000>;
 251                 };
 252
 253                 vreg_l8a_1p2: l8 {
 254                         regulator-min-microvolt = <1200000>;
 255                         regulator-max-microvolt = <1200000>;
 256                 };
 257
 258                 vreg_l9a_1p8: l9 {
 259                         regulator-min-microvolt = <1808000>;
 260                         regulator-max-microvolt = <2960000>;
 261                 };
 262
 263                 vreg_l10a_1p8: l10 {
 264                         regulator-min-microvolt = <1808000>;
 265                         regulator-max-microvolt = <2960000>;
 266                 };
 267
 268                 vreg_l11a_1p0: l11 {
 269                         regulator-min-microvolt = <1000000>;
 270                         regulator-max-microvolt = <1000000>;
 271                 };
 272
 273                 vreg_l12a_1p8: l12 {
 274                         regulator-min-microvolt = <1800000>;
 275                         regulator-max-microvolt = <1800000>;
 276                 };
 277
 278                 vreg_l13a_2p95: l13 {
 279                         regulator-min-microvolt = <1808000>;
 280                         regulator-max-microvolt = <2960000>;
 281                 };
 282
 283                 vreg_l14a_1p88: l14 {
 284                         regulator-min-microvolt = <1880000>;
 285                         regulator-max-microvolt = <1880000>;
 286                 };
 287
 288                 vreg_l15a_1p8: l15 {
 289                         regulator-min-microvolt = <1800000>;
 290                         regulator-max-microvolt = <1800000>;
 291                 };
 292
 293                 vreg_l16a_2p7: l16 {
 294                         regulator-min-microvolt = <2704000>;
 295                         regulator-max-microvolt = <2704000>;
 296                 };
 297
 298                 vreg_l17a_1p3: l17 {
 299                         regulator-min-microvolt = <1304000>;
 300                         regulator-max-microvolt = <1304000>;
 301                 };
 302
 303                 vreg_l18a_2p7: l18 {
 304                         regulator-min-microvolt = <2704000>;
 305                         regulator-max-microvolt = <2704000>;
 306                 };
 307
 308                 vreg_l19a_3p0: l19 {
 309                         regulator-min-microvolt = <3008000>;
 310                         regulator-max-microvolt = <3008000>;
 311                 };
 312
 313                 vreg_l20a_2p95: l20 {
 314                         regulator-min-microvolt = <2960000>;
 315                         regulator-max-microvolt = <2960000>;
 316                         regulator-allow-set-load;
 317                 };
 318
 319                 vreg_l21a_2p95: l21 {
 320                         regulator-min-microvolt = <2960000>;
 321                         regulator-max-microvolt = <2960000>;
 322                         regulator-system-load = <800000>;
 323                         regulator-allow-set-load;
 324                 };
 325
 326                 vreg_l22a_2p85: l22 {
 327                         regulator-min-microvolt = <2864000>;
 328                         regulator-max-microvolt = <2864000>;
 329                 };
 330
 331                 vreg_l23a_3p3: l23 {
 332                         regulator-min-microvolt = <3312000>;
 333                         regulator-max-microvolt = <3312000>;
 334                 };
 335
 336                 vreg_l24a_3p075: l24 {
 337                         regulator-min-microvolt = <3088000>;
 338                         regulator-max-microvolt = <3088000>;
 339                 };
 340
 341                 vreg_l25a_3p3: l25 {
 342                         regulator-min-microvolt = <3104000>;
 343                         regulator-max-microvolt = <3312000>;
 344                 };
 345
 346                 vreg_l26a_1p2: l26 {
 347                         regulator-min-microvolt = <1200000>;
 348                         regulator-max-microvolt = <1200000>;
 349                         regulator-allow-set-load;
 350                 };
 351
 352                 vreg_l28_3p0: l28 {
 353                         regulator-min-microvolt = <3008000>;
 354                         regulator-max-microvolt = <3008000>;
 355                 };
 356
 357                 vreg_lvs1a_1p8: lvs1 {
 358                         regulator-min-microvolt = <1800000>;
 359                         regulator-max-microvolt = <1800000>;
 360                 };
 361
 362                 vreg_lvs2a_1p8: lvs2 {
 363                         regulator-min-microvolt = <1800000>;
 364                         regulator-max-microvolt = <1800000>;
 365                 };
 366
 367         };
 368
 369         pmi8998-regulators {
 370                 compatible = "qcom,rpm-pmi8998-regulators";
 371
 372                 vdd_bob-supply = <&vph_pwr>;
 373
 374                 vreg_bob: bob {
 375                         regulator-min-microvolt = <3312000>;
 376                         regulator-max-microvolt = <3600000>;
 377                 };
 378         };
 379 };
 380
 381 &remoteproc_adsp {
 382         status = "okay";
 383 };
 384
 385 &remoteproc_mss {
 386         status = "okay";
 387 };
 388
 389 &remoteproc_slpi {
 390         status = "okay";
 391 };
 392
 393 &tlmm {
 394         gpio-reserved-ranges = <0 4>, <81 4>;
 395 };
 396
 397 &sdhc2 {
 398         status = "okay";
 399         cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
 400
 401         vmmc-supply = <&vreg_l21a_2p95>;
 402         vqmmc-supply = <&vreg_l13a_2p95>;
 403
 404         pinctrl-names = "default", "sleep";
 405         pinctrl-0 = <&sdc2_on &sdc2_cd>;
 406         pinctrl-1 = <&sdc2_off &sdc2_cd>;
 407 };
 408
 409 &stm {
 410         status = "okay";
 411 };
 412
 413 &ufshc {
 414         status = "okay";
 415         vcc-supply = <&vreg_l20a_2p95>;
 416         vccq-supply = <&vreg_l26a_1p2>;
 417         vccq2-supply = <&vreg_s4a_1p8>;
 418         vcc-max-microamp = <750000>;
 419         vccq-max-microamp = <560000>;
 420         vccq2-max-microamp = <750000>;
 421 };
 422
 423 &ufsphy {
 424         status = "okay";
 425         vdda-phy-supply = <&vreg_l1a_0p875>;
 426         vdda-pll-supply = <&vreg_l2a_1p2>;
 427         vddp-ref-clk-supply = <&vreg_l26a_1p2>;
 428 };
 429
 430 &usb3 {
 431         status = "okay";
 432 };
 433
 434 &usb3_dwc3 {
 435         dr_mode = "host"; /* Force to host until we have Type-C hooked up */
 436 };
 437
 438 &usb3phy {
 439         status = "okay";
 440
 441         vdda-phy-supply = <&vreg_l1a_0p875>;
 442         vdda-pll-supply = <&vreg_l2a_1p2>;
 443 };
 444
 445 &wifi {
 446         status = "okay";
 447
 448         vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
 449         vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
 450         vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
 451         vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
 452 };