arch/arm64/boot/dts/qcom/msm8956-sony-xperia-loire.dtsi

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2016-2022, AngeloGioacchino Del Regno
   4  *                          <angelogioacchino.delregno@somainline.org>
   5  * Copyright (c) 2022, Konrad Dybcio <konrad.dybcio@somainline.org>
   6  * Copyright (c) 2022, Marijn Suijten <marijn.suijten@somainline.org>
   7  */
   8
   9 #include "msm8956.dtsi"
  10
  11 #include "pm8004.dtsi"
  12 #include "pm8950.dtsi"
  13 #include "pmi8950.dtsi"
  14
  15 / {
  16         qcom,msm-id = <266 0x10001>; /* MSM8956 v1.1 */
  17         qcom,board-id = <8 0>;
  18
  19         aliases {
  20                 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
  21                 mmc1 = &sdhc_2; /* SDC2 SD card slot */
  22                 mmc2 = &sdhc_3; /* SDC3 SDIO card slot */
  23                 serial0 = &blsp2_uart2;
  24         };
  25
  26         chosen {
  27                 stdout-path = "serial0:115200n8";
  28         };
  29
  30         reserved-memory {
  31                 cont-splash@83000000 {
  32                         reg = <0x0 0x83000000 0x0 0x2800000>;
  33                 };
  34
  35                 ramoops@57f00000 {
  36                         compatible = "ramoops";
  37                         reg = <0 0x57f00000 0 0x100000>;
  38                         record-size = <0x20000>;
  39                         console-size = <0x40000>;
  40                         ftrace-size = <0x20000>;
  41                         pmsg-size = <0x20000>;
  42                         ecc-size = <16>;
  43                 };
  44         };
  45
  46         usbphy_1p2: regulator-usbphy-1p2 {
  47                 compatible = "regulator-fixed";
  48                 regulator-name = "usbphy-1p2";
  49                 regulator-always-on;
  50                 regulator-boot-on;
  51                 regulator-min-microvolt = <1200000>;
  52                 regulator-max-microvolt = <1200000>;
  53                 vin-supply = <&vph_pwr>;
  54         };
  55
  56         vph_pwr: regulator-vph-pwr {
  57                 compatible = "regulator-fixed";
  58                 regulator-name = "vph-pwr";
  59                 regulator-always-on;
  60                 regulator-boot-on;
  61         };
  62 };
  63
  64 &blsp1_i2c4 {
  65         status = "okay";
  66
  67         /* Synaptics RMI4 @ 2c */
  68 };
  69
  70 &blsp2_uart2 {
  71         status = "okay";
  72 };
  73
  74 &gcc {
  75         vdd_gfx-supply = <&pm8004_s5>;
  76 };
  77
  78 &otg {
  79         status = "okay";
  80 };
  81
  82 &pm8004_spmi_regulators {
  83         vdd_s2-supply = <&vph_pwr>;
  84         vdd_s5-supply = <&vph_pwr>;
  85
  86         /* Cluster 1 supply */
  87         pm8004_s2: s2 {
  88                 /* regulator-min-microvolt = <500000>; */
  89                 /* Set .95V to prevent unstabilities until CPR for this SoC is done */
  90                 regulator-min-microvolt = <950000>;
  91                 regulator-max-microvolt = <1165000>;
  92                 regulator-name = "vdd_apc1";
  93                 /* Set always on until the CPU PLL is done */
  94                 regulator-always-on;
  95                 regulator-boot-on;
  96         };
  97
  98         pm8004_s5: s5 {
  99                 regulator-min-microvolt = <950000>;
 100                 regulator-max-microvolt = <1165000>;
 101                 regulator-enable-ramp-delay = <500>;
 102                 regulator-name = "vdd_gfx";
 103                 /* Hack this on until the gpu driver is ready for it */
 104                 regulator-always-on;
 105         };
 106 };
 107
 108 &pm8950_spmi_regulators {
 109         vdd_s5-supply = <&vph_pwr>;
 110
 111         /* Cluster 0 supply */
 112         pm8950_spmi_s5: s5 {
 113                 /* Set .95V to prevent unstabilities until CPR for this SoC is done */
 114                 /* regulator-min-microvolt = <790000>; */
 115                 regulator-min-microvolt = <950000>;
 116                 regulator-max-microvolt = <1165000>;
 117                 regulator-name = "vdd_apc0";
 118                 /* Set always on until the CPU PLL is done */
 119                 regulator-always-on;
 120                 regulator-boot-on;
 121         };
 122 };
 123
 124 &rpm_requests {
 125         pm8950_regulators: regulators {
 126                 compatible = "qcom,rpm-pm8950-regulators";
 127
 128                 vdd_s1-supply = <&vph_pwr>;
 129                 vdd_s2-supply = <&vph_pwr>;
 130                 vdd_s3-supply = <&vph_pwr>;
 131                 vdd_s4-supply = <&vph_pwr>;
 132                 vdd_s6-supply = <&vph_pwr>;
 133                 vdd_l1_l19-supply = <&pm8950_s3>;
 134                 vdd_l2_l23-supply = <&pm8950_s3>;
 135                 vdd_l3-supply = <&pm8950_s3>;
 136                 vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
 137                 vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
 138
 139                 pm8950_s1: s1 {
 140                         regulator-min-microvolt = <1000000>;
 141                         regulator-max-microvolt = <1162500>;
 142                 };
 143
 144                 pm8950_s3: s3 {
 145                         regulator-min-microvolt = <1325000>;
 146                         regulator-max-microvolt = <1325000>;
 147                         regulator-always-on;
 148                 };
 149
 150                 pm8950_s4: s4 {
 151                         regulator-min-microvolt = <1800000>;
 152                         regulator-max-microvolt = <1800000>;
 153                         regulator-always-on;
 154                 };
 155
 156                 pm8950_l1: l1 {
 157                         regulator-min-microvolt = <900000>;
 158                         regulator-max-microvolt = <1100000>;
 159                 };
 160
 161                 pm8950_l2: l2 {
 162                         regulator-min-microvolt = <1200000>;
 163                         regulator-max-microvolt = <1200000>;
 164                 };
 165
 166                 pm8950_l3: l3 {
 167                         regulator-min-microvolt = <1000000>;
 168                         regulator-max-microvolt = <1200000>;
 169                 };
 170
 171                 pm8950_l5: l5 {
 172                         regulator-min-microvolt = <1800000>;
 173                         regulator-max-microvolt = <1800000>;
 174                         regulator-system-load = <290000>;
 175                         regulator-allow-set-load;
 176                 };
 177
 178                 pm8950_l6: l6 {
 179                         regulator-min-microvolt = <1800000>;
 180                         regulator-max-microvolt = <1800000>;
 181                 };
 182
 183                 pm8950_l7: l7 {
 184                         regulator-min-microvolt = <1800000>;
 185                         regulator-max-microvolt = <1800000>;
 186                 };
 187
 188                 pm8950_l8: l8 {
 189                         regulator-min-microvolt = <2900000>;
 190                         regulator-max-microvolt = <2900000>;
 191                         regulator-system-load = <130000>;
 192                         regulator-allow-set-load;
 193                 };
 194
 195                 pm8950_l9: l9 {
 196                         regulator-min-microvolt = <2000000>;
 197                         regulator-max-microvolt = <2400000>;
 198                 };
 199
 200                 pm8950_l10: l10 {
 201                         regulator-min-microvolt = <2500000>;
 202                         regulator-max-microvolt = <2900000>;
 203                 };
 204
 205                 pm8950_l11: l11 {
 206                         regulator-min-microvolt = <2950000>;
 207                         regulator-max-microvolt = <2950000>;
 208                         regulator-system-load = <60000>;
 209                         regulator-allow-set-load;
 210                 };
 211
 212                 pm8950_l12: l12 {
 213                         regulator-min-microvolt = <1800000>;
 214                         regulator-max-microvolt = <2950000>;
 215                         regulator-system-load = <100000>;
 216                         regulator-allow-set-load;
 217                 };
 218
 219                 pm8950_l13: l13 {
 220                         regulator-min-microvolt = <3075000>;
 221                         regulator-max-microvolt = <3075000>;
 222                 };
 223
 224                 pm8950_l14: l14 {
 225                         regulator-min-microvolt = <1800000>;
 226                         regulator-max-microvolt = <3300000>;
 227                 };
 228
 229                 pm8950_l15: l15 {
 230                         regulator-min-microvolt = <1800000>;
 231                         regulator-max-microvolt = <3300000>;
 232                 };
 233
 234                 pm8950_l16: l16 {
 235                         regulator-min-microvolt = <1800000>;
 236                         regulator-max-microvolt = <1800000>;
 237                 };
 238
 239                 pm8950_l17: l17 {
 240                         regulator-min-microvolt = <2500000>;
 241                         regulator-max-microvolt = <2900000>;
 242                 };
 243
 244                 pm8950_l22: l22 {
 245                         regulator-min-microvolt = <3000000>;
 246                         regulator-max-microvolt = <3000000>;
 247                 };
 248
 249                 pm8950_l23: l23 {
 250                         regulator-min-microvolt = <1200000>;
 251                         regulator-max-microvolt = <1200000>;
 252                 };
 253         };
 254 };
 255
 256 &sdhc_1 {
 257         /* Toshiba THGBMHG8C4LBAU7 (032G34) */
 258         bus-width = <8>;
 259         non-removable;
 260         vmmc-supply = <&pm8950_l8>;
 261         vqmmc-supply = <&pm8950_l5>;
 262         status = "okay";
 263 };
 264
 265 &sdhc_2 {
 266         bus-width = <4>;
 267         cd-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
 268         vmmc-supply = <&pm8950_l11>;
 269         vqmmc-supply = <&pm8950_l12>;
 270         status = "okay";
 271 };
 272
 273 &tlmm {
 274         gpio-reserved-ranges = <0 4>;
 275 };
 276
 277 &usb_hs_phy {
 278         vdd-supply = <&usbphy_1p2>;
 279         vdda1p8-supply = <&pm8950_l7>;
 280         vdda3p3-supply = <&pm8950_l13>;
 281         status = "okay";
 282 };
 283
 284 &xo_board {
 285         clock-frequency = <19200000>;
 286 };