arch/arm64/boot/dts/qcom/msm8953-xiaomi-tissot.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Danila Tikhonov <JIaxyga@protonmail.com>
   4  * Copyright (c) 2022, Anton Bambura <jenneron@protonmail.com>
   5  */
   6 /dts-v1/;
   7
   8 #include "msm8953.dtsi"
   9 #include "pm8953.dtsi"
  10 #include "pmi8950.dtsi"
  11 #include <dt-bindings/leds/common.h>
  12
  13 /delete-node/ &adsp_fw_mem;
  14 /delete-node/ &qseecom_mem;
  15 /delete-node/ &wcnss_fw_mem;
  16
  17 / {
  18         model = "Xiaomi Mi A1";
  19         compatible = "xiaomi,tissot", "qcom,msm8953";
  20         chassis-type = "handset";
  21         qcom,msm-id = <293 0>;
  22         qcom,board-id = <0x1000b 0x00>;
  23
  24         gpio-keys {
  25                 compatible = "gpio-keys";
  26
  27                 pinctrl-names = "default";
  28                 pinctrl-0 = <&gpio_key_default>, <&gpio_hall_sensor_default>;
  29
  30                 event-hall-sensor {
  31                         label = "Hall Effect Sensor";
  32                         gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
  33                         linux,input-type = <EV_SW>;
  34                         linux,code = <SW_LID>;
  35                         linux,can-disable;
  36                 };
  37
  38                 key-volume-up {
  39                         label = "Volume Up";
  40                         gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
  41                         linux,code = <KEY_VOLUMEUP>;
  42                 };
  43         };
  44
  45         reserved-memory {
  46                 qseecom_mem: qseecom@84a00000 {
  47                         reg = <0x0 0x84a00000 0x0 0x1900000>;
  48                         no-map;
  49                 };
  50
  51                 adsp_fw_mem: adsp@8d600000 {
  52                         reg = <0x0 0x8d600000 0x0 0x1200000>;
  53                         no-map;
  54                 };
  55
  56                 wcnss_fw_mem: wcnss@8e800000 {
  57                         reg = <0x0 0x8e800000 0x0 0x700000>;
  58                         no-map;
  59                 };
  60
  61                 ramoops@9ff00000 {
  62                         compatible = "ramoops";
  63                         reg = <0x0 0x9ff00000 0x0 0x00100000>;
  64                         record-size = <0x1000>;
  65                         console-size = <0x80000>;
  66                         ftrace-size = <0x1000>;
  67                         pmsg-size = <0x8000>;
  68                 };
  69         };
  70
  71         vph_pwr: vph-pwr-regulator {
  72                 compatible = "regulator-fixed";
  73                 regulator-name = "vph_pwr";
  74                 regulator-always-on;
  75                 regulator-boot-on;
  76         };
  77 };
  78
  79 &hsusb_phy {
  80         vdd-supply = <&pm8953_l3>;
  81         vdda-pll-supply = <&pm8953_l7>;
  82         vdda-phy-dpdm-supply = <&pm8953_l13>;
  83
  84         status = "okay";
  85 };
  86
  87 &i2c_2 {
  88         status = "okay";
  89
  90         max98927_codec: audio-codec@3a {
  91                 compatible = "maxim,max98927";
  92                 reg = <0x3a>;
  93
  94                 reset-gpios = <&tlmm 86 GPIO_ACTIVE_LOW>;
  95
  96                 vmon-slot-no = <1>;
  97                 imon-slot-no = <1>;
  98
  99                 #sound-dai-cells = <0>;
 100         };
 101
 102         led-controller@45 {
 103                 compatible = "awinic,aw2013";
 104                 reg = <0x45>;
 105
 106                 vcc-supply = <&pm8953_l10>;
 107
 108                 #address-cells = <1>;
 109                 #size-cells = <0>;
 110
 111                 led@0 {
 112                         reg = <0>;
 113                         led-max-microamp = <5000>;
 114                         function = LED_FUNCTION_INDICATOR;
 115                         color = <LED_COLOR_ID_WHITE>;
 116                 };
 117         };
 118 };
 119
 120 &i2c_3 {
 121         status = "okay";
 122
 123         touchscreen@38 {
 124                 compatible = "edt,edt-ft5406";
 125                 reg = <0x38>;
 126
 127                 interrupt-parent = <&tlmm>;
 128                 interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
 129
 130                 pinctrl-names = "default";
 131                 pinctrl-0 = <&ts_int_default>;
 132
 133                 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
 134
 135                 vcc-supply = <&pm8953_l10>;
 136
 137                 touchscreen-size-x = <1080>;
 138                 touchscreen-size-y = <1920>;
 139         };
 140 };
 141
 142 &pm8953_resin {
 143         linux,code = <KEY_VOLUMEDOWN>;
 144         status = "okay";
 145 };
 146
 147 &pmi8950_wled {
 148         qcom,num-strings = <2>;
 149         qcom,external-pfet;
 150         qcom,cabc;
 151
 152         status = "okay";
 153 };
 154
 155 &rpm_requests {
 156         regulators {
 157                 compatible = "qcom,rpm-pm8953-regulators";
 158
 159                 vdd_s1-supply = <&vph_pwr>;
 160                 vdd_s2-supply = <&vph_pwr>;
 161                 vdd_s3-supply = <&vph_pwr>;
 162                 vdd_s4-supply = <&vph_pwr>;
 163                 vdd_s5-supply = <&vph_pwr>;
 164                 vdd_s6-supply = <&vph_pwr>;
 165                 vdd_s7-supply = <&vph_pwr>;
 166                 vdd_l1-supply = <&pm8953_s3>;
 167                 vdd_l2_l3-supply = <&pm8953_s3>;
 168                 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
 169                 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
 170                 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
 171
 172                 pm8953_s1: s1 {
 173                         regulator-min-microvolt = <870000>;
 174                         regulator-max-microvolt = <1156000>;
 175                 };
 176
 177                 pm8953_s3: s3 {
 178                         regulator-min-microvolt = <1224000>;
 179                         regulator-max-microvolt = <1224000>;
 180                 };
 181
 182                 pm8953_s4: s4 {
 183                         regulator-min-microvolt = <1900000>;
 184                         regulator-max-microvolt = <2050000>;
 185                 };
 186
 187                 pm8953_l1: l1 {
 188                         regulator-min-microvolt = <1000000>;
 189                         regulator-max-microvolt = <1000000>;
 190                 };
 191
 192                 pm8953_l2: l2 {
 193                         regulator-min-microvolt = <1200000>;
 194                         regulator-max-microvolt = <1225000>;
 195                 };
 196
 197                 pm8953_l3: l3 {
 198                         regulator-min-microvolt = <925000>;
 199                         regulator-max-microvolt = <925000>;
 200                 };
 201
 202                 pm8953_l5: l5 {
 203                         regulator-min-microvolt = <1800000>;
 204                         regulator-max-microvolt = <1800000>;
 205                 };
 206
 207                 pm8953_l6: l6 {
 208                         regulator-min-microvolt = <1800000>;
 209                         regulator-max-microvolt = <1800000>;
 210                 };
 211
 212                 pm8953_l7: l7 {
 213                         regulator-min-microvolt = <1800000>;
 214                         regulator-max-microvolt = <1900000>;
 215                 };
 216
 217                 pm8953_l8: l8 {
 218                         regulator-min-microvolt = <2900000>;
 219                         regulator-max-microvolt = <2900000>;
 220                 };
 221
 222                 pm8953_l9: l9 {
 223                         regulator-min-microvolt = <3300000>;
 224                         regulator-max-microvolt = <3300000>;
 225                 };
 226
 227                 pm8953_l10:l10 {
 228                         regulator-min-microvolt = <2850000>;
 229                         regulator-max-microvolt = <2850000>;
 230                 };
 231
 232                 pm8953_l11: l11 {
 233                         regulator-min-microvolt = <2950000>;
 234                         regulator-max-microvolt = <2950000>;
 235                 };
 236
 237                 pm8953_l12: l12 {
 238                         regulator-min-microvolt = <1800000>;
 239                         regulator-max-microvolt = <2950000>;
 240                 };
 241
 242                 pm8953_l13: l13 {
 243                         regulator-min-microvolt = <3125000>;
 244                         regulator-max-microvolt = <3125000>;
 245                 };
 246
 247                 pm8953_l16: l16 {
 248                         regulator-min-microvolt = <1800000>;
 249                         regulator-max-microvolt = <1800000>;
 250                 };
 251
 252                 pm8953_l17: l17 {
 253                         regulator-min-microvolt = <2750000>;
 254                         regulator-max-microvolt = <2850000>;
 255                 };
 256
 257                 pm8953_l19: l19 {
 258                         regulator-min-microvolt = <1200000>;
 259                         regulator-max-microvolt = <1350000>;
 260                 };
 261
 262                 pm8953_l22: l22 {
 263                         regulator-min-microvolt = <2800000>;
 264                         regulator-max-microvolt = <2800000>;
 265                 };
 266
 267                 pm8953_l23: l23 {
 268                         regulator-min-microvolt = <1200000>;
 269                         regulator-max-microvolt = <1225000>;
 270                 };
 271         };
 272 };
 273
 274 &sdhc_1 {
 275         vmmc-supply = <&pm8953_l8>;
 276         vqmmc-supply = <&pm8953_l5>;
 277
 278         status = "okay";
 279 };
 280
 281 &sdhc_2 {
 282         vmmc-supply = <&pm8953_l11>;
 283         vqmmc-supply = <&pm8953_l12>;
 284
 285         cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
 286
 287         pinctrl-names = "default", "sleep";
 288         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 289         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 290
 291         status = "okay";
 292 };
 293
 294 &tlmm {
 295         gpio-reserved-ranges = <0 4>, <16 4>, <135 4>;
 296
 297         gpio_hall_sensor_default: gpio-hall-sensor-state {
 298                 pins = "gpio44";
 299                 function = "gpio";
 300                 drive-strength = <2>;
 301                 bias-pull-up;
 302         };
 303
 304         ts_int_default: ts-int-default-state {
 305                 pins = "gpio65";
 306                 function = "gpio";
 307                 drive-strength = <2>;
 308                 bias-pull-up;
 309         };
 310 };
 311
 312 &uart_0 {
 313         pinctrl-names = "default";
 314         pinctrl-0 = <&uart_console_active>;
 315
 316         status = "okay";
 317 };
 318
 319 &usb3 {
 320         status = "okay";
 321 };
 322
 323 &usb3_dwc3 {
 324         dr_mode = "peripheral";
 325 };