arch/arm64/boot/dts/qcom/msm8953-motorola-potter.dts

   1 // SPDX-License-Identifier: BSD-3-Clause
   2 /*
   3  * Copyright (c) 2022, Sireesh Kodali
   4  */
   5 /dts-v1/;
   6
   7 #include "msm8953.dtsi"
   8 #include "pm8953.dtsi"
   9 #include "pmi8950.dtsi"
  10
  11 /delete-node/ &cont_splash_mem;
  12 /delete-node/ &qseecom_mem;
  13
  14 / {
  15         model = "Motorola G5 Plus";
  16         compatible = "motorola,potter", "qcom,msm8953";
  17         chassis-type = "handset";
  18         qcom,msm-id = <293 0>;
  19         qcom,board-id = <0x46 0x83a0>;
  20
  21         chosen {
  22                 #address-cells = <2>;
  23                 #size-cells = <2>;
  24                 ranges;
  25
  26                 framebuffer@90001000 {
  27                         compatible = "simple-framebuffer";
  28                         reg = <0 0x90001000 0 (2220 * 1920 * 3)>;
  29
  30                         width = <1080>;
  31                         height = <1920>;
  32                         stride = <(1080 * 3)>;
  33                         format = "r8g8b8";
  34
  35                         power-domains = <&gcc MDSS_GDSC>;
  36
  37                         clocks = <&gcc GCC_MDSS_AHB_CLK>,
  38                                  <&gcc GCC_MDSS_AXI_CLK>,
  39                                  <&gcc GCC_MDSS_VSYNC_CLK>,
  40                                  <&gcc GCC_MDSS_MDP_CLK>,
  41                                  <&gcc GCC_MDSS_BYTE0_CLK>,
  42                                  <&gcc GCC_MDSS_PCLK0_CLK>,
  43                                  <&gcc GCC_MDSS_ESC0_CLK>;
  44                 };
  45         };
  46
  47         gpio-keys {
  48                 compatible = "gpio-keys";
  49
  50                 pinctrl-names = "default";
  51                 pinctrl-0 = <&gpio_key_default>;
  52
  53                 key-volume-up {
  54                         label = "Volume Up";
  55                         gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
  56                         linux,code = <KEY_VOLUMEUP>;
  57                 };
  58         };
  59
  60         reserved-memory {
  61                 qseecom_mem: qseecom@84300000 {
  62                         reg = <0x0 0x84300000 0x0 0x2000000>;
  63                         no-map;
  64                 };
  65
  66                 cont_splash_mem: cont-splash@90001000 {
  67                         reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
  68                         no-map;
  69                 };
  70
  71                 reserved@aefd2000 {
  72                         reg = <0x0 0xaefd2000 0x0 0x2e000>;
  73                         no-map;
  74                 };
  75
  76                 reserved@eefe4000 {
  77                         reg = <0x0 0xeefe4000 0x0 0x1c000>;
  78                         no-map;
  79                 };
  80
  81                 ramoops@ef000000 {
  82                         compatible = "ramoops";
  83                         reg = <0x0 0xef000000 0x0 0x80000>;
  84                         console-size = <0x40000>;
  85                         ftrace-size = <0>;
  86                         record-size = <0x3f800>;
  87                         pmsg-size = <0x800>;
  88                 };
  89         };
  90
  91         vph_pwr: vph-pwr-regulator {
  92                 compatible = "regulator-fixed";
  93                 regulator-name = "vph_pwr";
  94                 regulator-always-on;
  95                 regulator-boot-on;
  96         };
  97 };
  98
  99 &hsusb_phy {
 100         vdd-supply = <&pm8953_l3>;
 101         vdda-pll-supply = <&pm8953_l7>;
 102         vdda-phy-dpdm-supply = <&pm8953_l13>;
 103
 104         status = "okay";
 105 };
 106
 107 &i2c_3 {
 108         status = "okay";
 109
 110         touchscreen@20 {
 111                 reg = <0x20>;
 112                 compatible = "syna,rmi4-i2c";
 113
 114                 interrupt-parent = <&tlmm>;
 115                 interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
 116
 117                 pinctrl-names = "default";
 118                 pinctrl-0 = <&ts_reset>;
 119
 120                 vdd-supply = <&pm8953_l22>;
 121                 vio-supply = <&pm8953_l6>;
 122
 123                 syna,reset-delay-ms = <200>;
 124                 syna,startup-delay-ms = <500>;
 125         };
 126 };
 127
 128 &pm8953_resin {
 129         linux,code = <KEY_VOLUMEDOWN>;
 130         status = "okay";
 131 };
 132
 133 &pmi8950_wled {
 134         qcom,current-limit-microamp = <25000>;
 135         qcom,num-strings = <3>;
 136         qcom,external-pfet;
 137         qcom,cabc;
 138
 139         status = "okay";
 140 };
 141
 142 &rpm_requests {
 143         regulators {
 144                 compatible = "qcom,rpm-pm8953-regulators";
 145                 vdd_s1-supply = <&vph_pwr>;
 146                 vdd_s2-supply = <&vph_pwr>;
 147                 vdd_s3-supply = <&vph_pwr>;
 148                 vdd_s4-supply = <&vph_pwr>;
 149                 vdd_s5-supply = <&vph_pwr>;
 150                 vdd_s6-supply = <&vph_pwr>;
 151                 vdd_s7-supply = <&vph_pwr>;
 152                 vdd_l1-supply = <&pm8953_s3>;
 153                 vdd_l2_l3-supply = <&pm8953_s3>;
 154                 vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
 155                 vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
 156                 vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
 157
 158                 pm8953_s1: s1 {
 159                         regulator-min-microvolt = <863000>;
 160                         regulator-max-microvolt = <1152000>;
 161                 };
 162
 163                 pm8953_s3: s3 {
 164                         regulator-min-microvolt = <1224000>;
 165                         regulator-max-microvolt = <1224000>;
 166                 };
 167
 168                 pm8953_s4: s4 {
 169                         regulator-min-microvolt = <1896000>;
 170                         regulator-max-microvolt = <2048000>;
 171                 };
 172
 173                 pm8953_l1: l1 {
 174                         regulator-min-microvolt = <1000000>;
 175                         regulator-max-microvolt = <1100000>;
 176                 };
 177
 178                 pm8953_l2: l2 {
 179                         regulator-min-microvolt = <1000000>;
 180                         regulator-max-microvolt = <1000000>;
 181                 };
 182
 183                 pm8953_l3: l3 {
 184                         regulator-min-microvolt = <925000>;
 185                         regulator-max-microvolt = <925000>;
 186                         regulator-allow-set-load;
 187                 };
 188
 189                 pm8953_l5: l5 {
 190                         regulator-min-microvolt = <1800000>;
 191                         regulator-max-microvolt = <1800000>;
 192                 };
 193
 194                 pm8953_l6: l6 {
 195                         regulator-min-microvolt = <1800000>;
 196                         regulator-max-microvolt = <1800000>;
 197                         regulator-always-on;
 198                 };
 199
 200                 pm8953_l7: l7 {
 201                         regulator-min-microvolt = <1800000>;
 202                         regulator-max-microvolt = <1900000>;
 203                 };
 204
 205                 pm8953_l8: l8 {
 206                         regulator-min-microvolt = <2900000>;
 207                         regulator-max-microvolt = <2900000>;
 208                 };
 209
 210                 pm8953_l9: l9 {
 211                         regulator-min-microvolt = <3000000>;
 212                         regulator-max-microvolt = <3300000>;
 213                 };
 214
 215                 pm8953_l10: l10 {
 216                         regulator-min-microvolt = <1800000>;
 217                         regulator-max-microvolt = <1800000>;
 218                 };
 219
 220                 pm8953_l11: l11 {
 221                         regulator-min-microvolt = <2800000>;
 222                         regulator-max-microvolt = <3000000>;
 223                 };
 224
 225                 pm8953_l12: l12 {
 226                         regulator-min-microvolt = <1800000>;
 227                         regulator-max-microvolt = <3000000>;
 228                 };
 229
 230                 pm8953_l13: l13 {
 231                         regulator-min-microvolt = <3075000>;
 232                         regulator-max-microvolt = <3125000>;
 233                 };
 234
 235                 pm8953_l15: l15 {
 236                         regulator-min-microvolt = <1800000>;
 237                         regulator-max-microvolt = <1800000>;
 238                 };
 239
 240                 pm8953_l16: l16 {
 241                         regulator-min-microvolt = <1800000>;
 242                         regulator-max-microvolt = <1800000>;
 243                 };
 244
 245                 pm8953_l17: l17 {
 246                         regulator-min-microvolt = <2800000>;
 247                         regulator-max-microvolt = <3000000>;
 248                 };
 249
 250                 pm8953_l19: l19 {
 251                         regulator-min-microvolt = <1200000>;
 252                         regulator-max-microvolt = <1350000>;
 253                 };
 254
 255                 pm8953_l22: l22 {
 256                         regulator-always-on;
 257                         regulator-min-microvolt = <2800000>;
 258                         regulator-max-microvolt = <2850000>;
 259                 };
 260
 261                 pm8953_l23: l23 {
 262                         regulator-min-microvolt = <975000>;
 263                         regulator-max-microvolt = <1225000>;
 264                 };
 265         };
 266 };
 267
 268 &sdhc_1 {
 269         vmmc-supply = <&pm8953_l8>;
 270         vqmmc-supply = <&pm8953_l5>;
 271
 272         status = "okay";
 273 };
 274
 275 &sdhc_2 {
 276         vmmc-supply = <&pm8953_l11>;
 277         vqmmc-supply = <&pm8953_l12>;
 278
 279         cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
 280
 281         pinctrl-names = "default", "sleep";
 282         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>;
 283         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 284
 285         status = "okay";
 286 };
 287
 288 &tlmm {
 289         gpio-reserved-ranges = <1 2>, <96 4>, <111 1>, <126 1>;
 290
 291         ts_reset: ts-reset-state {
 292                 pins = "gpio64";
 293                 function = "gpio";
 294                 drive-strength = <2>;
 295                 bias-pull-up;
 296         };
 297 };
 298
 299 &usb3 {
 300         status = "okay";
 301 };
 302
 303 &usb3_dwc3 {
 304         dr_mode = "peripheral";
 305 };