arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
   4  * Copyright (c) 2022-2023, Bryan O'Donoghue.
   5  *
   6  */
   7
   8 /dts-v1/;
   9
  10 #include "msm8939.dtsi"
  11 #include "msm8939-pm8916.dtsi"
  12 #include <dt-bindings/arm/qcom,ids.h>
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
  15
  16 / {
  17         model = "Sony Xperia M4 Aqua";
  18         compatible = "sony,kanuti-tulip", "qcom,msm8939";
  19         chassis-type = "handset";
  20
  21         qcom,board-id = <QCOM_BOARD_ID_MTP 0>;
  22         qcom,msm-id = <QCOM_ID_MSM8939 0>, <QCOM_ID_MSM8939 0x30000>;
  23
  24         aliases {
  25                 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
  26                 mmc1 = &sdhc_2; /* SDC2 SD card slot */
  27                 serial0 = &blsp_uart2;
  28         };
  29
  30         chosen {
  31                 stdout-path = "serial0:115200n8";
  32         };
  33
  34         usb_id: usb-id {
  35                 compatible = "linux,extcon-usb-gpio";
  36                 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
  37                 pinctrl-0 = <&usb_id_default>;
  38                 pinctrl-names = "default";
  39         };
  40 };
  41
  42 &gpu {
  43         status = "okay";
  44 };
  45
  46 &mdss {
  47         status = "okay";
  48 };
  49
  50 &tlmm {
  51         sdc2_cd_default: sdc2-cd-default-state {
  52                 pins = "gpio38";
  53                 function = "gpio";
  54                 drive-strength = <2>;
  55                 bias-pull-up;
  56         };
  57
  58         usb_id_default: usb-id-default-state {
  59                 pins = "gpio110";
  60                 function = "gpio";
  61                 bias-pull-up;
  62                 drive-strength = <8>;
  63         };
  64 };
  65
  66 &sdhc_1 {
  67         status = "okay";
  68 };
  69
  70 &sdhc_2 {
  71         pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
  72         pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
  73         pinctrl-names = "default", "sleep";
  74         cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
  75         status = "okay";
  76 };
  77
  78 &usb {
  79         extcon = <&usb_id>, <&usb_id>;
  80         status = "okay";
  81 };
  82
  83 &usb_hs_phy {
  84         extcon = <&usb_id>;
  85 };
  86
  87 &wcnss {
  88         status = "okay";
  89 };
  90
  91 &wcnss_iris {
  92         compatible = "qcom,wcn3660";
  93 };
  94
  95 &wcnss_mem {
  96         status = "okay";
  97 };