arch/arm64/boot/dts/qcom/msm8916-ufi.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "msm8916-pm8916.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/leds/common.h>
   7
   8 / {
   9         chassis-type = "embedded";
  10
  11         aliases {
  12                 mmc0 = &sdhc_1; /* eMMC */
  13                 serial0 = &blsp_uart2;
  14         };
  15
  16         chosen {
  17                 stdout-path = "serial0";
  18         };
  19
  20         gpio-keys {
  21                 compatible = "gpio-keys";
  22
  23                 pinctrl-0 = <&button_default>;
  24                 pinctrl-names = "default";
  25
  26                 label = "GPIO Buttons";
  27
  28                 /* GPIO is board-specific */
  29                 button_restart: button-restart {
  30                         label = "Restart";
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 pinctrl-0 = <&gpio_leds_default>;
  39                 pinctrl-names = "default";
  40
  41                 /*
  42                  * GPIOs are board-specific.
  43                  * Functions and default-states defined here are fallbacks.
  44                  * Feel free to override them if your board is different.
  45                  */
  46                 led_r: led-r {
  47                         color = <LED_COLOR_ID_RED>;
  48                         default-state = "on";
  49                         function = LED_FUNCTION_POWER;
  50                 };
  51
  52                 led_g: led-g {
  53                         color = <LED_COLOR_ID_GREEN>;
  54                         default-state = "off";
  55                         function = LED_FUNCTION_WLAN;
  56                 };
  57
  58                 led_b: led-b {
  59                         color = <LED_COLOR_ID_BLUE>;
  60                         default-state = "off";
  61                         function = LED_FUNCTION_WAN;
  62                 };
  63         };
  64 };
  65
  66 &bam_dmux {
  67         status = "okay";
  68 };
  69
  70 &bam_dmux_dma {
  71         status = "okay";
  72 };
  73
  74 &blsp_uart2 {
  75         status = "okay";
  76 };
  77
  78 /* Remove &mdss_dsi0_phy from clocks to make sure that gcc probes with display disabled */
  79 &gcc {
  80         clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
  81 };
  82
  83 &mba_mem {
  84         status = "okay";
  85 };
  86
  87 &mpss {
  88         status = "okay";
  89 };
  90
  91 &mpss_mem {
  92         reg = <0x0 0x86800000 0x0 0x5500000>;
  93         status = "okay";
  94 };
  95
  96 &pm8916_usbin {
  97         status = "okay";
  98 };
  99
 100 &sdhc_1 {
 101         status = "okay";
 102 };
 103
 104 &usb {
 105         extcon = <&pm8916_usbin>;
 106         usb-role-switch;
 107
 108         status = "okay";
 109 };
 110
 111 &usb_hs_phy {
 112         extcon = <&pm8916_usbin>;
 113 };
 114
 115 &venus {
 116         status = "okay";
 117 };
 118
 119 &venus_mem {
 120         status = "okay";
 121 };
 122
 123 &wcnss {
 124         status = "okay";
 125 };
 126
 127 &wcnss_iris {
 128         compatible = "qcom,wcn3620";
 129 };
 130
 131 &wcnss_mem {
 132         status = "okay";
 133 };
 134
 135 &tlmm {
 136         /* pins are board-specific */
 137         button_default: button-default-state {
 138                 function = "gpio";
 139                 drive-strength = <2>;
 140         };
 141
 142         gpio_leds_default: gpio-leds-default-state {
 143                 function = "gpio";
 144                 drive-strength = <2>;
 145                 bias-disable;
 146         };
 147 };