arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "msm8916-samsung-a2015-common.dtsi"
   4
   5 / {
   6         haptic {
   7                 compatible = "regulator-haptic";
   8                 haptic-supply = <&reg_motor_vdd>;
   9                 min-microvolt = <3300000>;
  10                 max-microvolt = <3300000>;
  11         };
  12
  13         i2c-muic {
  14                 /* SM5504 MUIC instead of SM5502 */
  15                 /delete-node/ extcon@25;
  16
  17                 muic: extcon@14 {
  18                         compatible = "siliconmitus,sm5504-muic";
  19                         reg = <0x14>;
  20
  21                         interrupt-parent = <&msmgpio>;
  22                         interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
  23
  24                         pinctrl-names = "default";
  25                         pinctrl-0 = <&muic_int_default>;
  26                 };
  27         };
  28
  29         reg_motor_vdd: regulator-motor-vdd {
  30                 compatible = "regulator-fixed";
  31                 regulator-name = "motor_vdd";
  32                 regulator-min-microvolt = <3300000>;
  33                 regulator-max-microvolt = <3300000>;
  34
  35                 gpio = <&msmgpio 76 GPIO_ACTIVE_HIGH>;
  36                 enable-active-high;
  37
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&motor_en_default>;
  40         };
  41
  42         reg_touch_key: regulator-touch-key {
  43                 compatible = "regulator-fixed";
  44                 regulator-name = "touch_key";
  45                 regulator-min-microvolt = <3300000>;
  46                 regulator-max-microvolt = <3300000>;
  47
  48                 gpio = <&msmgpio 97 GPIO_ACTIVE_HIGH>;
  49                 enable-active-high;
  50
  51                 pinctrl-names = "default";
  52                 pinctrl-0 = <&tkey_en_default>;
  53         };
  54 };
  55
  56 &blsp_i2c2 {
  57         /* lis2hh12 accelerometer instead of BMC150 */
  58         status = "disabled";
  59
  60         /delete-node/ accelerometer@10;
  61         /delete-node/ magnetometer@12;
  62 };
  63
  64 &touchkey {
  65         vcc-supply = <&reg_touch_key>;
  66         vdd-supply = <&reg_touch_key>;
  67 };
  68
  69 &msmgpio {
  70         motor_en_default: motor-en-default {
  71                 pins = "gpio76";
  72                 function = "gpio";
  73
  74                 drive-strength = <2>;
  75                 bias-disable;
  76         };
  77
  78         tkey_en_default: tkey-en-default {
  79                 pins = "gpio97";
  80                 function = "gpio";
  81
  82                 drive-strength = <2>;
  83                 bias-disable;
  84         };
  85 };