arch/arm64/boot/dts/qcom/msm8916-samsung-e2015-common.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 #include "msm8916-samsung-a2015-common.dtsi"
   4
   5 / {
   6         haptic {
   7                 compatible = "regulator-haptic";
   8                 haptic-supply = <&reg_motor_vdd>;
   9                 min-microvolt = <3300000>;
  10                 max-microvolt = <3300000>;
  11         };
  12
  13         i2c-muic {
  14                 /* SM5504 MUIC instead of SM5502 */
  15                 /delete-node/ extcon@25;
  16
  17                 muic: extcon@14 {
  18                         compatible = "siliconmitus,sm5504-muic";
  19                         reg = <0x14>;
  20
  21                         interrupt-parent = <&tlmm>;
  22                         interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
  23
  24                         pinctrl-names = "default";
  25                         pinctrl-0 = <&muic_int_default>;
  26                 };
  27         };
  28
  29         reg_touch_key: regulator-touch-key {
  30                 compatible = "regulator-fixed";
  31                 regulator-name = "touch_key";
  32                 regulator-min-microvolt = <3300000>;
  33                 regulator-max-microvolt = <3300000>;
  34
  35                 gpio = <&tlmm 97 GPIO_ACTIVE_HIGH>;
  36                 enable-active-high;
  37
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&tkey_en_default>;
  40         };
  41 };
  42
  43 &blsp_i2c2 {
  44         /* lis2hh12 accelerometer instead of BMC150 */
  45         /delete-node/ accelerometer@10;
  46         /delete-node/ magnetometer@12;
  47
  48         accelerometer@1d {
  49                 compatible = "st,lis2hh12";
  50                 reg = <0x1d>;
  51
  52                 interrupt-parent = <&tlmm>;
  53                 interrupts = <115 IRQ_TYPE_LEVEL_HIGH>;
  54
  55                 vdd-supply = <&pm8916_l5>;
  56                 vddio-supply = <&pm8916_l5>;
  57
  58                 st,drdy-int-pin = <1>;
  59                 mount-matrix = "1", "0", "0",
  60                                "0", "-1", "0",
  61                                "0", "0", "1";
  62
  63                 pinctrl-0 = <&accel_int_default>;
  64                 pinctrl-names = "default";
  65         };
  66 };
  67
  68 &reg_motor_vdd {
  69         regulator-min-microvolt = <3300000>;
  70         regulator-max-microvolt = <3300000>;
  71 };
  72
  73 &touchkey {
  74         vcc-supply = <&reg_touch_key>;
  75         vdd-supply = <&reg_touch_key>;
  76 };
  77
  78 &wcnss {
  79         status = "okay";
  80 };
  81
  82 &wcnss_iris {
  83         compatible = "qcom,wcn3620";
  84 };
  85
  86 &wcnss_mem {
  87         status = "okay";
  88 };
  89
  90 &tlmm {
  91         tkey_en_default: tkey-en-default-state {
  92                 pins = "gpio97";
  93                 function = "gpio";
  94
  95                 drive-strength = <2>;
  96                 bias-disable;
  97         };
  98 };