arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-samsung-a2015-common.dtsi"
   6
   7 / {
   8         model = "Samsung Galaxy A3U (EUR)";
   9         compatible = "samsung,a3u-eur", "qcom,msm8916";
  10         chassis-type = "handset";
  11
  12         reg_panel_vdd3: regulator-panel-vdd3 {
  13                 compatible = "regulator-fixed";
  14                 regulator-name = "panel_vdd3";
  15                 regulator-min-microvolt = <1800000>;
  16                 regulator-max-microvolt = <1800000>;
  17
  18                 gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>;
  19                 enable-active-high;
  20
  21                 pinctrl-names = "default";
  22                 pinctrl-0 = <&panel_vdd3_default>;
  23         };
  24
  25         reg_touch_key: regulator-touch-key {
  26                 compatible = "regulator-fixed";
  27                 regulator-name = "touch_key";
  28                 regulator-min-microvolt = <2800000>;
  29                 regulator-max-microvolt = <2800000>;
  30
  31                 gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
  32                 enable-active-high;
  33
  34                 pinctrl-names = "default";
  35                 pinctrl-0 = <&tkey_en_default>;
  36         };
  37
  38         reg_key_led: regulator-key-led {
  39                 compatible = "regulator-fixed";
  40                 regulator-name = "key_led";
  41                 regulator-min-microvolt = <3300000>;
  42                 regulator-max-microvolt = <3300000>;
  43
  44                 gpio = <&tlmm 60 GPIO_ACTIVE_HIGH>;
  45                 enable-active-high;
  46
  47                 pinctrl-names = "default";
  48                 pinctrl-0 = <&tkey_led_en_default>;
  49         };
  50 };
  51
  52 &touchkey {
  53         vcc-supply = <&reg_touch_key>;
  54         vdd-supply = <&reg_key_led>;
  55 };
  56
  57 &accelerometer {
  58         mount-matrix = "0", "1", "0",
  59                        "1", "0", "0",
  60                        "0", "0", "1";
  61 };
  62
  63 &blsp_i2c5 {
  64         status = "okay";
  65
  66         touchscreen@20 {
  67                 compatible = "zinitix,bt541";
  68
  69                 reg = <0x20>;
  70                 interrupt-parent = <&tlmm>;
  71                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
  72
  73                 touchscreen-size-x = <540>;
  74                 touchscreen-size-y = <960>;
  75
  76                 vcca-supply = <&reg_vdd_tsp_a>;
  77                 vdd-supply = <&pm8916_l6>;
  78
  79                 pinctrl-names = "default";
  80                 pinctrl-0 = <&ts_int_default>;
  81         };
  82 };
  83
  84 &clk_pwm {
  85         status = "okay";
  86 };
  87
  88 &mdss_dsi0 {
  89         panel@0 {
  90                 reg = <0>;
  91
  92                 compatible = "samsung,s6e88a0-ams452ef01";
  93
  94                 vdd3-supply = <&reg_panel_vdd3>;
  95                 vci-supply = <&pm8916_l17>;
  96                 reset-gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
  97
  98                 port {
  99                         panel_in: endpoint {
 100                                 remote-endpoint = <&mdss_dsi0_out>;
 101                         };
 102                 };
 103         };
 104 };
 105
 106 &mdss_dsi0_out {
 107         data-lanes = <0 1>;
 108         remote-endpoint = <&panel_in>;
 109 };
 110
 111 &vibrator {
 112         status = "okay";
 113 };
 114
 115 &wcnss {
 116         status = "okay";
 117 };
 118
 119 &wcnss_iris {
 120         compatible = "qcom,wcn3620";
 121 };
 122
 123 &wcnss_mem {
 124         status = "okay";
 125 };
 126
 127 &tlmm {
 128         panel_vdd3_default: panel-vdd3-default-state {
 129                 pins = "gpio9";
 130                 function = "gpio";
 131
 132                 drive-strength = <2>;
 133                 bias-disable;
 134         };
 135
 136         tkey_en_default: tkey-en-default-state {
 137                 pins = "gpio86";
 138                 function = "gpio";
 139
 140                 drive-strength = <2>;
 141                 bias-disable;
 142         };
 143
 144         tkey_led_en_default: tkey-led-en-default-state {
 145                 pins = "gpio60";
 146                 function = "gpio";
 147
 148                 drive-strength = <2>;
 149                 bias-disable;
 150         };
 151 };