1 // SPDX-License-Identifier: GPL-2.0-only
5 #include "msm8916-pm8916.dtsi"
7 #include <dt-bindings/gpio/gpio.h>
8 #include <dt-bindings/input/input.h>
9 #include <dt-bindings/leds/common.h>
12 model = "GPLUS FL8005A";
13 compatible = "gplus,fl8005a", "qcom,msm8916";
14 chassis-type = "tablet";
17 mmc0 = &sdhc_1; /* eMMC */
18 mmc1 = &sdhc_2; /* SD card */
19 serial0 = &blsp_uart2;
23 stdout-path = "serial0";
26 flash-led-controller {
27 /* Actually qcom,leds-gpio-flash */
28 compatible = "sgmicro,sgm3140";
29 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
30 flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
32 pinctrl-0 = <&camera_flash_default>;
33 pinctrl-names = "default";
36 function = LED_FUNCTION_FLASH;
37 color = <LED_COLOR_ID_WHITE>;
38 flash-max-timeout-us = <250000>;
43 compatible = "gpio-keys";
45 pinctrl-0 = <&gpio_keys_default>;
46 pinctrl-names = "default";
50 gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
51 linux,code = <KEY_VOLUMEUP>;
56 compatible = "gpio-leds";
58 pinctrl-0 = <&gpio_leds_default>;
59 pinctrl-names = "default";
62 function = LED_FUNCTION_CHARGING;
63 color = <LED_COLOR_ID_RED>;
64 gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
65 retain-state-suspended;
69 function = LED_FUNCTION_CHARGING;
70 color = <LED_COLOR_ID_GREEN>;
71 gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
72 retain-state-suspended;
77 compatible = "linux,extcon-usb-gpio";
78 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
79 pinctrl-0 = <&usb_id_default>;
80 pinctrl-names = "default";
89 compatible = "edt,edt-ft5406";
92 interrupt-parent = <&tlmm>;
93 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
95 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
97 vcc-supply = <&pm8916_l17>;
98 iovcc-supply = <&pm8916_l6>;
100 touchscreen-size-x = <800>;
101 touchscreen-size-y = <500>;
102 touchscreen-inverted-x;
103 touchscreen-swapped-x-y;
105 pinctrl-0 = <&touchscreen_default>;
106 pinctrl-names = "default";
115 linux,code = <KEY_VOLUMEDOWN>;
119 &pm8916_rpm_regulators {
121 regulator-min-microvolt = <2850000>;
122 regulator-max-microvolt = <2850000>;
135 pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
136 pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
137 pinctrl-names = "default", "sleep";
139 cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
145 extcon = <&usb_id>, <&usb_id>;
166 compatible = "qcom,wcn3620";
174 camera_flash_default: camera-flash-default-state {
175 pins = "gpio31", "gpio32";
177 drive-strength = <2>;
181 gpio_keys_default: gpio-keys-default-state {
184 drive-strength = <2>;
188 gpio_leds_default: gpio-led-default-state {
189 pins = "gpio117", "gpio118";
191 drive-strength = <2>;
195 sdc2_cd_default: sdc2-cd-default-state {
198 drive-strength = <2>;
202 touchscreen_default: touchscreen-default-state {
206 drive-strength = <2>;
213 drive-strength = <2>;
218 usb_id_default: usb-id-default-state {
221 drive-strength = <8>;