arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/leds/common.h>
  10
  11 / {
  12         model = "GPLUS FL8005A";
  13         compatible = "gplus,fl8005a", "qcom,msm8916";
  14         chassis-type = "tablet";
  15
  16         aliases {
  17                 mmc0 = &sdhc_1; /* eMMC */
  18                 mmc1 = &sdhc_2; /* SD card */
  19                 serial0 = &blsp_uart2;
  20         };
  21
  22         chosen {
  23                 stdout-path = "serial0";
  24         };
  25
  26         flash-led-controller {
  27                 /* Actually qcom,leds-gpio-flash */
  28                 compatible = "sgmicro,sgm3140";
  29                 enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
  30                 flash-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
  31
  32                 pinctrl-0 = <&camera_flash_default>;
  33                 pinctrl-names = "default";
  34
  35                 flash_led: led {
  36                         function = LED_FUNCTION_FLASH;
  37                         color = <LED_COLOR_ID_WHITE>;
  38                         flash-max-timeout-us = <250000>;
  39                 };
  40         };
  41
  42         gpio-keys {
  43                 compatible = "gpio-keys";
  44
  45                 pinctrl-0 = <&gpio_keys_default>;
  46                 pinctrl-names = "default";
  47
  48                 button-volume-up {
  49                         label = "Volume Up";
  50                         gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_VOLUMEUP>;
  52                 };
  53         };
  54
  55         gpio-leds {
  56                 compatible = "gpio-leds";
  57
  58                 pinctrl-0 = <&gpio_leds_default>;
  59                 pinctrl-names = "default";
  60
  61                 led-red {
  62                         function = LED_FUNCTION_CHARGING;
  63                         color = <LED_COLOR_ID_RED>;
  64                         gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
  65                         retain-state-suspended;
  66                 };
  67
  68                 led-green {
  69                         function = LED_FUNCTION_CHARGING;
  70                         color = <LED_COLOR_ID_GREEN>;
  71                         gpios = <&tlmm 118 GPIO_ACTIVE_HIGH>;
  72                         retain-state-suspended;
  73                 };
  74         };
  75
  76         usb_id: usb-id {
  77                 compatible = "linux,extcon-usb-gpio";
  78                 id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
  79                 pinctrl-0 = <&usb_id_default>;
  80                 pinctrl-names = "default";
  81         };
  82 };
  83
  84 &blsp_i2c5 {
  85         status = "okay";
  86
  87         touchscreen@38 {
  88                 /* Actually ft5402 */
  89                 compatible = "edt,edt-ft5406";
  90                 reg = <0x38>;
  91
  92                 interrupt-parent = <&tlmm>;
  93                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
  94
  95                 reset-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>;
  96
  97                 vcc-supply = <&pm8916_l17>;
  98                 iovcc-supply = <&pm8916_l6>;
  99
 100                 touchscreen-size-x = <800>;
 101                 touchscreen-size-y = <500>;
 102                 touchscreen-inverted-x;
 103                 touchscreen-swapped-x-y;
 104
 105                 pinctrl-0 = <&touchscreen_default>;
 106                 pinctrl-names = "default";
 107         };
 108 };
 109
 110 &blsp_uart2 {
 111         status = "okay";
 112 };
 113
 114 &pm8916_resin {
 115         linux,code = <KEY_VOLUMEDOWN>;
 116         status = "okay";
 117 };
 118
 119 &pm8916_rpm_regulators {
 120         pm8916_l17: l17 {
 121                 regulator-min-microvolt = <2850000>;
 122                 regulator-max-microvolt = <2850000>;
 123         };
 124 };
 125
 126 &pm8916_vib {
 127         status = "okay";
 128 };
 129
 130 &sdhc_1 {
 131         status = "okay";
 132 };
 133
 134 &sdhc_2 {
 135         pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
 136         pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
 137         pinctrl-names = "default", "sleep";
 138
 139         cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
 140
 141         status = "okay";
 142 };
 143
 144 &usb {
 145         extcon = <&usb_id>, <&usb_id>;
 146         status = "okay";
 147 };
 148
 149 &usb_hs_phy {
 150         extcon = <&usb_id>;
 151 };
 152
 153 &venus {
 154         status = "okay";
 155 };
 156
 157 &venus_mem {
 158         status = "okay";
 159 };
 160
 161 &wcnss {
 162         status = "okay";
 163 };
 164
 165 &wcnss_iris {
 166         compatible = "qcom,wcn3620";
 167 };
 168
 169 &wcnss_mem {
 170         status = "okay";
 171 };
 172
 173 &tlmm {
 174         camera_flash_default: camera-flash-default-state {
 175                 pins = "gpio31", "gpio32";
 176                 function = "gpio";
 177                 drive-strength = <2>;
 178                 bias-disable;
 179         };
 180
 181         gpio_keys_default: gpio-keys-default-state {
 182                 pins = "gpio107";
 183                 function = "gpio";
 184                 drive-strength = <2>;
 185                 bias-pull-up;
 186         };
 187
 188         gpio_leds_default: gpio-led-default-state {
 189                 pins = "gpio117", "gpio118";
 190                 function = "gpio";
 191                 drive-strength = <2>;
 192                 bias-disable;
 193         };
 194
 195         sdc2_cd_default: sdc2-cd-default-state {
 196                 pins = "gpio38";
 197                 function = "gpio";
 198                 drive-strength = <2>;
 199                 bias-disable;
 200         };
 201
 202         touchscreen_default: touchscreen-default-state {
 203                 reset-pins {
 204                         pins = "gpio12";
 205                         function = "gpio";
 206                         drive-strength = <2>;
 207                         bias-disable;
 208                 };
 209
 210                 touchscreen-pins {
 211                         pins = "gpio13";
 212                         function = "gpio";
 213                         drive-strength = <2>;
 214                         bias-pull-up;
 215                 };
 216         };
 217
 218         usb_id_default: usb-id-default-state {
 219                 pins = "gpio110";
 220                 function = "gpio";
 221                 drive-strength = <8>;
 222                 bias-pull-up;
 223         };
 224 };