arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2
   3 /dts-v1/;
   4
   5 #include "msm8916-pm8916.dtsi"
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         model = "Alcatel OneTouch Idol 3 (4.7)";
  11         compatible = "alcatel,idol347", "qcom,msm8916";
  12         chassis-type = "handset";
  13
  14         aliases {
  15                 serial0 = &blsp1_uart2;
  16         };
  17
  18         chosen {
  19                 stdout-path = "serial0";
  20         };
  21
  22         gpio-keys {
  23                 compatible = "gpio-keys";
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&gpio_keys_default>;
  27
  28                 label = "GPIO Buttons";
  29
  30                 button-volume-up {
  31                         label = "Volume Up";
  32                         gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_VOLUMEUP>;
  34                 };
  35         };
  36
  37         usb_id: usb-id {
  38                 compatible = "linux,extcon-usb-gpio";
  39                 id-gpio = <&msmgpio 69 GPIO_ACTIVE_HIGH>;
  40                 pinctrl-names = "default";
  41                 pinctrl-0 = <&usb_id_default>;
  42         };
  43 };
  44
  45 &blsp1_uart2 {
  46         status = "okay";
  47 };
  48
  49 &blsp_i2c4 {
  50         status = "okay";
  51
  52         touchscreen@26 {
  53                 compatible = "mstar,msg2638";
  54                 reg = <0x26>;
  55                 interrupt-parent = <&msmgpio>;
  56                 interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
  57                 reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>;
  58                 pinctrl-names = "default";
  59                 pinctrl-0 = <&ts_int_reset_default>;
  60                 vdd-supply = <&pm8916_l17>;
  61                 vddio-supply = <&pm8916_l5>;
  62                 touchscreen-size-x = <2048>;
  63                 touchscreen-size-y = <2048>;
  64         };
  65 };
  66
  67 &blsp_i2c5 {
  68         status = "okay";
  69
  70         magnetometer@c {
  71                 compatible = "asahi-kasei,ak09911";
  72                 reg = <0x0c>;
  73                 vdd-supply = <&pm8916_l17>;
  74                 vid-supply = <&pm8916_l6>;
  75                 reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;
  76                 pinctrl-names = "default";
  77                 pinctrl-0 = <&mag_reset_default>;
  78                 mount-matrix = "0", "1", "0",
  79                                "-1", "0", "0",
  80                                "0", "0", "1";
  81         };
  82
  83         accelerometer@f {
  84                 compatible = "kionix,kxtj21009";
  85                 reg = <0x0f>;
  86                 vdd-supply = <&pm8916_l17>;
  87                 vddio-supply = <&pm8916_l6>;
  88                 interrupt-parent = <&msmgpio>;
  89                 interrupts = <31 IRQ_TYPE_EDGE_RISING>;
  90                 pinctrl-names = "default";
  91                 pinctrl-0 = <&accel_int_default>;
  92                 mount-matrix = "-1", "0", "0",
  93                                "0", "1", "0",
  94                                "0", "0", "-1";
  95         };
  96
  97         proximity@48 {
  98                 compatible = "sensortek,stk3310";
  99                 reg = <0x48>;
 100                 interrupt-parent = <&msmgpio>;
 101                 interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
 102                 pinctrl-names = "default";
 103                 pinctrl-0 = <&proximity_int_default>;
 104         };
 105
 106         gyroscope@68 {
 107                 compatible = "bosch,bmg160";
 108                 reg = <0x68>;
 109                 vdd-supply = <&pm8916_l17>;
 110                 vddio-supply = <&pm8916_l6>;
 111                 interrupt-parent = <&msmgpio>;
 112                 interrupts = <97 IRQ_TYPE_EDGE_RISING>,
 113                              <98 IRQ_TYPE_EDGE_RISING>;
 114                 pinctrl-names = "default";
 115                 pinctrl-0 = <&gyro_int_default>;
 116         };
 117 };
 118
 119 &pm8916_resin {
 120         status = "okay";
 121         linux,code = <KEY_VOLUMEDOWN>;
 122 };
 123
 124 &pm8916_vib {
 125         status = "okay";
 126 };
 127
 128 &pronto {
 129         status = "okay";
 130 };
 131
 132 &sdhc_1 {
 133         status = "okay";
 134
 135         pinctrl-names = "default", "sleep";
 136         pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
 137         pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
 138 };
 139
 140 &sdhc_2 {
 141         status = "okay";
 142
 143         pinctrl-names = "default", "sleep";
 144         pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
 145         pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
 146
 147         cd-gpios = <&msmgpio 38 GPIO_ACTIVE_LOW>;
 148 };
 149
 150 &usb {
 151         status = "okay";
 152         extcon = <&usb_id>, <&usb_id>;
 153 };
 154
 155 &usb_hs_phy {
 156         extcon = <&usb_id>;
 157 };
 158
 159 &smd_rpm_regulators {
 160         vdd_l1_l2_l3-supply = <&pm8916_s3>;
 161         vdd_l4_l5_l6-supply = <&pm8916_s4>;
 162         vdd_l7-supply = <&pm8916_s4>;
 163
 164         s3 {
 165                 regulator-min-microvolt = <1200000>;
 166                 regulator-max-microvolt = <1300000>;
 167         };
 168
 169         s4 {
 170                 regulator-min-microvolt = <1800000>;
 171                 regulator-max-microvolt = <2100000>;
 172         };
 173
 174         l1 {
 175                 regulator-min-microvolt = <1225000>;
 176                 regulator-max-microvolt = <1225000>;
 177         };
 178
 179         l2 {
 180                 regulator-min-microvolt = <1200000>;
 181                 regulator-max-microvolt = <1200000>;
 182         };
 183
 184         l4 {
 185                 regulator-min-microvolt = <2050000>;
 186                 regulator-max-microvolt = <2050000>;
 187         };
 188
 189         l5 {
 190                 regulator-min-microvolt = <1800000>;
 191                 regulator-max-microvolt = <1800000>;
 192         };
 193
 194         l6 {
 195                 regulator-min-microvolt = <1800000>;
 196                 regulator-max-microvolt = <1800000>;
 197         };
 198
 199         l7 {
 200                 regulator-min-microvolt = <1800000>;
 201                 regulator-max-microvolt = <1800000>;
 202         };
 203
 204         l8 {
 205                 regulator-min-microvolt = <2850000>;
 206                 regulator-max-microvolt = <2900000>;
 207         };
 208
 209         l9 {
 210                 regulator-min-microvolt = <3300000>;
 211                 regulator-max-microvolt = <3300000>;
 212         };
 213
 214         l10 {
 215                 regulator-min-microvolt = <2700000>;
 216                 regulator-max-microvolt = <2800000>;
 217         };
 218
 219         l11 {
 220                 regulator-min-microvolt = <1800000>;
 221                 regulator-max-microvolt = <2950000>;
 222                 regulator-allow-set-load;
 223                 regulator-system-load = <200000>;
 224         };
 225
 226         l12 {
 227                 regulator-min-microvolt = <1800000>;
 228                 regulator-max-microvolt = <2950000>;
 229         };
 230
 231         l13 {
 232                 regulator-min-microvolt = <3075000>;
 233                 regulator-max-microvolt = <3075000>;
 234         };
 235
 236         l14 {
 237                 regulator-min-microvolt = <1800000>;
 238                 regulator-max-microvolt = <3300000>;
 239         };
 240
 241         l15 {
 242                 regulator-min-microvolt = <1800000>;
 243                 regulator-max-microvolt = <3300000>;
 244         };
 245
 246         l16 {
 247                 regulator-min-microvolt = <1800000>;
 248                 regulator-max-microvolt = <3300000>;
 249         };
 250
 251         l17 {
 252                 regulator-min-microvolt = <2850000>;
 253                 regulator-max-microvolt = <2850000>;
 254         };
 255
 256         l18 {
 257                 regulator-min-microvolt = <2700000>;
 258                 regulator-max-microvolt = <2700000>;
 259         };
 260 };
 261
 262 &msmgpio {
 263         accel_int_default: accel-int-default {
 264                 pins = "gpio31";
 265                 function = "gpio";
 266
 267                 drive-strength = <2>;
 268                 bias-disable;
 269         };
 270
 271         gpio_keys_default: gpio-keys-default {
 272                 pins = "gpio107";
 273                 function = "gpio";
 274
 275                 drive-strength = <2>;
 276                 bias-pull-up;
 277         };
 278
 279         gyro_int_default: gyro-int-default {
 280                 pins = "gpio97", "gpio98";
 281                 function = "gpio";
 282
 283                 drive-strength = <2>;
 284                 bias-disable;
 285         };
 286
 287         mag_reset_default: mag-reset-default {
 288                 pins = "gpio8";
 289                 function = "gpio";
 290
 291                 drive-strength = <2>;
 292                 bias-disable;
 293         };
 294
 295         proximity_int_default: proximity-int-default {
 296                 pins = "gpio12";
 297                 function = "gpio";
 298
 299                 drive-strength = <6>;
 300                 bias-pull-up;
 301         };
 302
 303         ts_int_reset_default: ts-int-reset-default {
 304                 pins = "gpio13", "gpio100";
 305                 function = "gpio";
 306
 307                 drive-strength = <2>;
 308                 bias-disable;
 309         };
 310
 311         usb_id_default: usb-id-default {
 312                 pins = "gpio69";
 313                 function = "gpio";
 314
 315                 drive-strength = <8>;
 316                 bias-pull-up;
 317         };
 318 };