arch/arm64/boot/dts/qcom/ipq8074-hk01.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /dts-v1/;
   3 /* Copyright (c) 2017, The Linux Foundation. All rights reserved.
   4  */
   5 #include "ipq8074.dtsi"
   6
   7 / {
   8         model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
   9         compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
  10
  11         aliases {
  12                 serial0 = &blsp1_uart5;
  13                 serial1 = &blsp1_uart3;
  14         };
  15
  16         chosen {
  17                 stdout-path = "serial0";
  18         };
  19
  20         memory@40000000 {
  21                 device_type = "memory";
  22                 reg = <0x0 0x40000000 0x0 0x20000000>;
  23         };
  24
  25         vreg_dummy: regulator-dummy { };
  26 };
  27
  28 &blsp1_i2c2 {
  29         status = "okay";
  30 };
  31
  32 &blsp1_spi1 {
  33         status = "okay";
  34
  35         flash@0 {
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38                 compatible = "jedec,spi-nor";
  39                 reg = <0>;
  40                 spi-max-frequency = <50000000>;
  41         };
  42 };
  43
  44 &blsp1_uart3 {
  45         status = "okay";
  46 };
  47
  48 &blsp1_uart5 {
  49         status = "okay";
  50 };
  51
  52 &pcie0 {
  53         status = "okay";
  54         perst-gpios = <&tlmm 61 0x1>;
  55 };
  56
  57 &pcie1 {
  58         status = "okay";
  59         perst-gpios = <&tlmm 58 0x1>;
  60 };
  61
  62 &pcie_qmp0 {
  63         status = "okay";
  64 };
  65
  66 &pcie_qmp1 {
  67         status = "okay";
  68 };
  69
  70 &qpic_bam {
  71         status = "okay";
  72 };
  73
  74 &qpic_nand {
  75         status = "okay";
  76
  77         nand@0 {
  78                 reg = <0>;
  79                 nand-ecc-strength = <4>;
  80                 nand-ecc-step-size = <512>;
  81                 nand-bus-width = <8>;
  82         };
  83 };
  84
  85 &sdhc_1 {
  86         status = "okay";
  87 };
  88
  89 &qusb_phy_0 {
  90         status = "okay";
  91 };
  92
  93 &qusb_phy_1 {
  94         status = "okay";
  95 };
  96
  97 &ssphy_0 {
  98         status = "okay";
  99         vdda-phy-supply = <&vreg_dummy>;
 100         vdda-pll-supply = <&vreg_dummy>;
 101 };
 102
 103 &ssphy_1 {
 104         status = "okay";
 105         vdda-phy-supply = <&vreg_dummy>;
 106         vdda-pll-supply = <&vreg_dummy>;
 107 };
 108
 109 &usb_0 {
 110         status = "okay";
 111 };
 112
 113 &usb_1 {
 114         status = "okay";
 115 };