1 // SPDX-License-Identifier: GPL-2.0
3 #include "tegra234.dtsi"
6 compatible = "nvidia,p3767", "nvidia,tegra234";
13 compatible = "atmel,24c02";
17 vcc-supply = <&vdd_1v8_hs>;
29 compatible = "jedec,spi-nor";
31 spi-max-frequency = <102000000>;
32 spi-tx-bus-width = <4>;
33 spi-rx-bus-width = <4>;
38 * This only exists on Jetson Orin Nano Developer Kit (SKU 5)
39 * but UEFI needs this and will remove it on devices where it
45 cd-gpios = <&gpio TEGRA234_MAIN_GPIO(G, 7) GPIO_ACTIVE_LOW>;
54 vclamp-usb-supply = <&vdd_1v8_ao>;
55 avdd-usb-supply = <&vdd_3v3_ao>;
62 compatible = "ti,ina3221";
70 shunt-resistor-micro-ohms = <5000>;
75 label = "VDD_CPU_GPU_CV";
76 shunt-resistor-micro-ohms = <5000>;
82 shunt-resistor-micro-ohms = <5000>;
92 nvidia,invert-interrupt;
96 vdd_5v0_sys: regulator-vdd-5v0-sys {
97 compatible = "regulator-fixed";
98 regulator-name = "VDD_5V0_SYS";
99 regulator-min-microvolt = <5000000>;
100 regulator-max-microvolt = <5000000>;
104 vdd_1v8_hs: regulator-vdd-1v8-hs {
105 compatible = "regulator-fixed";
106 regulator-name = "VDD_1V8_HS";
107 regulator-min-microvolt = <1800000>;
108 regulator-max-microvolt = <1800000>;
112 vdd_1v8_ao: regulator-vdd-1v8-ao {
113 compatible = "regulator-fixed";
114 regulator-name = "VDD_1V8_AO";
115 regulator-min-microvolt = <1800000>;
116 regulator-max-microvolt = <1800000>;
118 vin-supply = <&vdd_5v0_sys>;
121 vdd_3v3_ao: regulator-vdd-3v3-ao {
122 compatible = "regulator-fixed";
123 regulator-name = "VDD_3V3_AO";
124 regulator-min-microvolt = <33000000>;
125 regulator-max-microvolt = <33000000>;
127 vin-supply = <&vdd_5v0_sys>;
132 polling-delay = <1000>;
133 polling-delay-passive = <1000>;
137 tj_trip_active0: active-0 {
138 temperature = <35000>;
143 tj_trip_active1: active-1 {
144 temperature = <74000>;
149 tj_trip_active2: active-2 {
150 temperature = <95000>;