1 // SPDX-License-Identifier: GPL-2.0
2 #include "tegra194.dtsi"
4 #include <dt-bindings/mfd/max77620.h>
8 ethernet0 = "/bus@0/ethernet@2490000";
10 i2c1 = "/bus@0/i2c@3160000";
11 i2c2 = "/bus@0/i2c@c240000";
12 i2c3 = "/bus@0/i2c@3180000";
13 i2c4 = "/bus@0/i2c@3190000";
14 i2c5 = "/bus@0/i2c@31c0000";
15 i2c6 = "/bus@0/i2c@c250000";
16 i2c7 = "/bus@0/i2c@31e0000";
17 rtc0 = "/bpmp/i2c/pmic@3c";
18 rtc1 = "/bus@0/rtc@c2a0000";
23 bootargs = "console=ttyTCU0,115200n8";
24 stdout-path = "serial0:115200n8";
31 phy-reset-gpios = <&gpio TEGRA194_MAIN_GPIO(R, 1) GPIO_ACTIVE_LOW>;
33 phy-mode = "rgmii-id";
40 compatible = "ethernet-phy-ieee802.3-c22";
42 interrupt-parent = <&gpio>;
43 interrupts = <TEGRA194_MAIN_GPIO(G, 4) IRQ_TYPE_LEVEL_LOW>;
49 memory-controller@2c00000 {
61 compatible = "atmel,24c02";
65 vcc-supply = <&vdd_1v8ls>;
74 avdd-usb-supply = <&vdd_usb_3v3>;
75 vclamp-usb-supply = <&vdd_1v8ao>;
79 vbus-supply = <&vdd_5v0_sys>;
83 vbus-supply = <&vdd_5v0_sys>;
87 vbus-supply = <&vdd_5v0_sys>;
91 vbus-supply = <&vdd_5v0_sys>;
101 nvidia,invert-interrupt;
110 compatible = "maxim,max20024";
113 interrupt-parent = <&pmc>;
114 interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
115 #interrupt-cells = <2>;
116 interrupt-controller;
121 pinctrl-names = "default";
122 pinctrl-0 = <&max20024_default>;
126 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
127 maxim,shutdown-fps-time-period-us = <640>;
131 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
132 maxim,shutdown-fps-time-period-us = <640>;
133 maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
137 maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
138 maxim,shutdown-fps-time-period-us = <640>;
142 max20024_default: pinmux {
150 function = "fps-out";
151 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
156 function = "fps-out";
157 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
162 function = "fps-out";
163 maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
168 function = "32k-out1";
169 drive-push-pull = <1>;
175 drive-push-pull = <1>;
181 drive-push-pull = <0>;
186 in-sd0-supply = <&vdd_5v0_sys>;
187 in-sd1-supply = <&vdd_5v0_sys>;
188 in-sd2-supply = <&vdd_5v0_sys>;
189 in-sd3-supply = <&vdd_5v0_sys>;
190 in-sd4-supply = <&vdd_5v0_sys>;
192 in-ldo0-1-supply = <&vdd_5v0_sys>;
193 in-ldo2-supply = <&vdd_5v0_sys>;
194 in-ldo3-5-supply = <&vdd_5v0_sys>;
195 in-ldo4-6-supply = <&vdd_5v0_sys>;
196 in-ldo7-8-supply = <&vdd_1v8ls>;
199 regulator-name = "VDDIO_SYS_1V0";
200 regulator-min-microvolt = <1000000>;
201 regulator-max-microvolt = <1000000>;
207 regulator-name = "VDDIO_SYS_1V8HS";
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1800000>;
215 regulator-name = "VDDIO_SYS_1V8LS";
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
223 regulator-name = "VDDIO_AO_1V8";
224 regulator-min-microvolt = <1800000>;
225 regulator-max-microvolt = <1800000>;
231 regulator-name = "VDD_DDR_1V1";
232 regulator-min-microvolt = <1100000>;
233 regulator-max-microvolt = <1100000>;
239 regulator-name = "VDD_RTC";
240 regulator-min-microvolt = <800000>;
241 regulator-max-microvolt = <800000>;
247 regulator-name = "VDDIO_AO_3V3";
248 regulator-min-microvolt = <3300000>;
249 regulator-max-microvolt = <3300000>;
255 regulator-name = "VDD_EMMC_3V3";
256 regulator-min-microvolt = <3300000>;
257 regulator-max-microvolt = <3300000>;
261 regulator-name = "VDD_USB_3V3";
262 regulator-min-microvolt = <3300000>;
263 regulator-max-microvolt = <3300000>;
269 regulator-name = "VDD_SDIO_3V3";
270 regulator-min-microvolt = <3300000>;
271 regulator-max-microvolt = <3300000>;
275 regulator-name = "AVDD_CSI_1V2";
276 regulator-min-microvolt = <1200000>;
277 regulator-max-microvolt = <1200000>;