1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
3 * Copyright (C) 2022 BayLibre, SAS.
4 * Author: Fabien Parent <fparent@baylibre.com>
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
14 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
17 model = "MediaTek MT8195 demo board";
18 compatible = "mediatek,mt8195-demo", "mediatek,mt8195";
25 stdout-path = "serial0:921600n8";
30 compatible = "linaro,optee-tz";
36 compatible = "gpio-keys";
37 pinctrl-names = "default";
38 pinctrl-0 = <&gpio_keys_pins>;
41 gpios = <&pio 106 GPIO_ACTIVE_LOW>;
43 linux,code = <KEY_VOLUMEUP>;
45 debounce-interval = <15>;
50 device_type = "memory";
51 reg = <0 0x40000000 0x2 0x00000000>;
60 * 12 MiB reserved for OP-TEE (BL32)
61 * +-----------------------+ 0x43e0_0000
63 * +-----------------------+ 0x43c0_0000
65 * + TZDRAM +--------------+ 0x4340_0000
67 * +-----------------------+ 0x4320_0000
69 optee_reserved: optee@43200000 {
71 reg = <0 0x43200000 0 0x00c00000>;
74 scp_mem: memory@50000000 {
75 compatible = "shared-dma-pool";
76 reg = <0 0x50000000 0 0x2900000>;
80 vpu_mem: memory@53000000 {
81 compatible = "shared-dma-pool";
82 reg = <0 0x53000000 0 0x1400000>; /* 20 MB */
85 /* 2 MiB reserved for ARM Trusted Firmware (BL31) */
86 bl31_secmon_mem: memory@54600000 {
88 reg = <0 0x54600000 0x0 0x200000>;
91 snd_dma_mem: memory@60000000 {
92 compatible = "shared-dma-pool";
93 reg = <0 0x60000000 0 0x1100000>;
97 apu_mem: memory@62000000 {
98 compatible = "shared-dma-pool";
99 reg = <0 0x62000000 0 0x1400000>; /* 20 MB */
105 phy-mode = "rgmii-id";
106 phy-handle = <ðernet_phy0>;
107 snps,reset-gpio = <&pio 93 GPIO_ACTIVE_HIGH>;
108 snps,reset-delays-us = <0 10000 80000>;
109 pinctrl-names = "default", "sleep";
110 pinctrl-0 = <ð_default_pins>;
111 pinctrl-1 = <ð_sleep_pins>;
115 ethernet_phy0: ethernet-phy@1 {
122 clock-frequency = <400000>;
123 pinctrl-0 = <&i2c6_pins>;
124 pinctrl-names = "default";
128 compatible = "mediatek,mt6360";
130 interrupt-controller;
131 interrupts-extended = <&pio 101 IRQ_TYPE_EDGE_FALLING>;
132 interrupt-names = "IRQB";
135 compatible = "mediatek,mt6360-chg";
136 richtek,vinovp-microvolt = <14500000>;
138 otg_vbus_regulator: usb-otg-vbus-regulator {
139 regulator-compatible = "usb-otg-vbus";
140 regulator-name = "usb-otg-vbus";
141 regulator-min-microvolt = <4425000>;
142 regulator-max-microvolt = <5825000>;
147 compatible = "mediatek,mt6360-regulator";
148 LDO_VIN3-supply = <&mt6360_buck2>;
150 mt6360_buck1: buck1 {
151 regulator-compatible = "BUCK1";
152 regulator-name = "mt6360,buck1";
153 regulator-min-microvolt = <300000>;
154 regulator-max-microvolt = <1300000>;
155 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
161 mt6360_buck2: buck2 {
162 regulator-compatible = "BUCK2";
163 regulator-name = "mt6360,buck2";
164 regulator-min-microvolt = <300000>;
165 regulator-max-microvolt = <1300000>;
166 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
173 regulator-compatible = "LDO1";
174 regulator-name = "mt6360,ldo1";
175 regulator-min-microvolt = <1200000>;
176 regulator-max-microvolt = <3600000>;
177 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
182 regulator-compatible = "LDO2";
183 regulator-name = "mt6360,ldo2";
184 regulator-min-microvolt = <1200000>;
185 regulator-max-microvolt = <3600000>;
186 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
191 regulator-compatible = "LDO3";
192 regulator-name = "mt6360,ldo3";
193 regulator-min-microvolt = <1200000>;
194 regulator-max-microvolt = <3600000>;
195 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
200 regulator-compatible = "LDO5";
201 regulator-name = "mt6360,ldo5";
202 regulator-min-microvolt = <2700000>;
203 regulator-max-microvolt = <3600000>;
204 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
209 regulator-compatible = "LDO6";
210 regulator-name = "mt6360,ldo6";
211 regulator-min-microvolt = <500000>;
212 regulator-max-microvolt = <2100000>;
213 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
218 regulator-compatible = "LDO7";
219 regulator-name = "mt6360,ldo7";
220 regulator-min-microvolt = <500000>;
221 regulator-max-microvolt = <2100000>;
222 regulator-allowed-modes = <MT6360_OPMODE_NORMAL
232 pinctrl-names = "default", "state_uhs";
233 pinctrl-0 = <&mmc0_default_pins>;
234 pinctrl-1 = <&mmc0_uhs_pins>;
236 max-frequency = <200000000>;
243 hs400-ds-delay = <0x14c11>;
244 vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
245 vqmmc-supply = <&mt6359_vufs_ldo_reg>;
250 pinctrl-names = "default", "state_uhs";
251 pinctrl-0 = <&mmc1_default_pins>;
252 pinctrl-1 = <&mmc1_uhs_pins>;
253 cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>;
255 max-frequency = <200000000>;
259 vmmc-supply = <&mt6360_ldo5>;
260 vqmmc-supply = <&mt6360_ldo3>;
264 &mt6359_vbbck_ldo_reg {
268 &mt6359_vcore_buck_reg {
272 &mt6359_vgpu11_buck_reg {
276 &mt6359_vproc1_buck_reg {
280 &mt6359_vproc2_buck_reg {
284 &mt6359_vpu_buck_reg {
288 &mt6359_vrf12_ldo_reg {
292 &mt6359_vsram_md_ldo_reg {
296 &mt6359_vsram_others_ldo_reg {
301 eth_default_pins: eth-default-pins {
303 pinmux = <PINMUX_GPIO77__FUNC_GBE_TXD3>,
304 <PINMUX_GPIO78__FUNC_GBE_TXD2>,
305 <PINMUX_GPIO79__FUNC_GBE_TXD1>,
306 <PINMUX_GPIO80__FUNC_GBE_TXD0>;
307 drive-strength = <MTK_DRIVE_8mA>;
310 pinmux = <PINMUX_GPIO85__FUNC_GBE_TXC>,
311 <PINMUX_GPIO88__FUNC_GBE_TXEN>,
312 <PINMUX_GPIO87__FUNC_GBE_RXDV>,
313 <PINMUX_GPIO86__FUNC_GBE_RXC>;
314 drive-strength = <MTK_DRIVE_8mA>;
317 pinmux = <PINMUX_GPIO81__FUNC_GBE_RXD3>,
318 <PINMUX_GPIO82__FUNC_GBE_RXD2>,
319 <PINMUX_GPIO83__FUNC_GBE_RXD1>,
320 <PINMUX_GPIO84__FUNC_GBE_RXD0>;
323 pinmux = <PINMUX_GPIO89__FUNC_GBE_MDC>,
324 <PINMUX_GPIO90__FUNC_GBE_MDIO>;
328 pinmux = <PINMUX_GPIO91__FUNC_GPIO91>,
329 <PINMUX_GPIO92__FUNC_GPIO92>;
334 eth_sleep_pins: eth-sleep-pins {
336 pinmux = <PINMUX_GPIO77__FUNC_GPIO77>,
337 <PINMUX_GPIO78__FUNC_GPIO78>,
338 <PINMUX_GPIO79__FUNC_GPIO79>,
339 <PINMUX_GPIO80__FUNC_GPIO80>;
342 pinmux = <PINMUX_GPIO85__FUNC_GPIO85>,
343 <PINMUX_GPIO88__FUNC_GPIO88>,
344 <PINMUX_GPIO87__FUNC_GPIO87>,
345 <PINMUX_GPIO86__FUNC_GPIO86>;
348 pinmux = <PINMUX_GPIO81__FUNC_GPIO81>,
349 <PINMUX_GPIO82__FUNC_GPIO82>,
350 <PINMUX_GPIO83__FUNC_GPIO83>,
351 <PINMUX_GPIO84__FUNC_GPIO84>;
354 pinmux = <PINMUX_GPIO89__FUNC_GPIO89>,
355 <PINMUX_GPIO90__FUNC_GPIO90>;
361 gpio_keys_pins: gpio-keys-pins {
363 pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
368 i2c6_pins: i2c6-pins {
370 pinmux = <PINMUX_GPIO25__FUNC_SDA6>,
371 <PINMUX_GPIO26__FUNC_SCL6>;
376 mmc0_default_pins: mmc0-default-pins {
378 pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
379 drive-strength = <MTK_DRIVE_6mA>;
380 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
384 pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
385 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
386 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
387 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
388 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
389 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
390 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
391 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
392 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
394 drive-strength = <MTK_DRIVE_6mA>;
395 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
399 pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
400 drive-strength = <MTK_DRIVE_6mA>;
401 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
405 mmc0_uhs_pins: mmc0-uhs-pins {
407 pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>;
408 drive-strength = <MTK_DRIVE_8mA>;
409 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
413 pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>,
414 <PINMUX_GPIO125__FUNC_MSDC0_DAT1>,
415 <PINMUX_GPIO124__FUNC_MSDC0_DAT2>,
416 <PINMUX_GPIO123__FUNC_MSDC0_DAT3>,
417 <PINMUX_GPIO119__FUNC_MSDC0_DAT4>,
418 <PINMUX_GPIO118__FUNC_MSDC0_DAT5>,
419 <PINMUX_GPIO117__FUNC_MSDC0_DAT6>,
420 <PINMUX_GPIO116__FUNC_MSDC0_DAT7>,
421 <PINMUX_GPIO121__FUNC_MSDC0_CMD>;
423 drive-strength = <MTK_DRIVE_8mA>;
424 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
428 pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>;
429 drive-strength = <MTK_DRIVE_8mA>;
430 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
434 pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>;
435 drive-strength = <MTK_DRIVE_8mA>;
436 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
440 mmc1_default_pins: mmc1-default-pins {
442 pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
443 drive-strength = <MTK_DRIVE_8mA>;
444 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
448 pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
449 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
450 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
451 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
452 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
454 drive-strength = <MTK_DRIVE_8mA>;
455 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
459 pinmux = <PINMUX_GPIO129__FUNC_GPIO129>;
464 mmc1_uhs_pins: mmc1-uhs-pins {
466 pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>;
467 drive-strength = <MTK_DRIVE_8mA>;
468 bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
472 pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>,
473 <PINMUX_GPIO112__FUNC_MSDC1_DAT0>,
474 <PINMUX_GPIO113__FUNC_MSDC1_DAT1>,
475 <PINMUX_GPIO114__FUNC_MSDC1_DAT2>,
476 <PINMUX_GPIO115__FUNC_MSDC1_DAT3>;
478 drive-strength = <MTK_DRIVE_8mA>;
479 bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
483 uart0_pins: uart0-pins {
485 pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
486 <PINMUX_GPIO99__FUNC_URXD0>;
490 uart1_pins: uart1-pins {
492 pinmux = <PINMUX_GPIO102__FUNC_UTXD1>,
493 <PINMUX_GPIO103__FUNC_URXD1>;
500 interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
504 pinctrl-names = "default";
505 pinctrl-0 = <&uart0_pins>;
510 pinctrl-names = "default";
511 pinctrl-0 = <&uart1_pins>;
532 vusb33-supply = <&mt6359_vusb_ldo_reg>;
533 vbus-supply = <&otg_vbus_regulator>;
538 vusb33-supply = <&mt6359_vusb_ldo_reg>;
543 vusb33-supply = <&mt6359_vusb_ldo_reg>;
548 vusb33-supply = <&mt6359_vusb_ldo_reg>;