2 * Copyright (C) 2016 Marvell Technology Group Ltd.
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPLv2 or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 * Device Tree file for Marvell Armada 8040 Development board platform
47 #include <dt-bindings/gpio/gpio.h>
48 #include "armada-8040.dtsi"
51 model = "Marvell Armada 8040 DB board";
52 compatible = "marvell,armada8040-db", "marvell,armada8040",
53 "marvell,armada-ap806-quad", "marvell,armada-ap806";
56 stdout-path = "serial0:115200n8";
60 device_type = "memory";
61 reg = <0x0 0x0 0x0 0x80000000>;
65 ethernet0 = &cpm_eth0;
66 ethernet1 = &cpm_eth2;
67 ethernet2 = &cps_eth0;
68 ethernet3 = &cps_eth1;
71 cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
72 compatible = "regulator-fixed";
73 regulator-name = "cpm-usb3h0-vbus";
74 regulator-min-microvolt = <5000000>;
75 regulator-max-microvolt = <5000000>;
77 gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
80 cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
81 compatible = "regulator-fixed";
82 regulator-name = "cpm-usb3h1-vbus";
83 regulator-min-microvolt = <5000000>;
84 regulator-max-microvolt = <5000000>;
86 gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
89 cpm_usb3_0_phy: cpm-usb3-0-phy {
90 compatible = "usb-nop-xceiv";
91 vcc-supply = <&cpm_reg_usb3_0_vbus>;
94 cpm_usb3_1_phy: cpm-usb3-1-phy {
95 compatible = "usb-nop-xceiv";
96 vcc-supply = <&cpm_reg_usb3_1_vbus>;
99 cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
100 compatible = "regulator-fixed";
101 regulator-name = "cps-usb3h0-vbus";
102 regulator-min-microvolt = <5000000>;
103 regulator-max-microvolt = <5000000>;
105 gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
108 cps_usb3_0_phy: cps-usb3-0-phy {
109 compatible = "usb-nop-xceiv";
110 vcc-supply = <&cps_reg_usb3_0_vbus>;
116 clock-frequency = <100000>;
123 #address-cells = <1>;
125 compatible = "jedec,spi-nor";
127 spi-max-frequency = <10000000>;
130 compatible = "fixed-partitions";
131 #address-cells = <1>;
139 label = "Filesystem";
140 reg = <0x200000 0xce0000>;
146 /* Accessible over the mini-USB CON9 connector on the main board */
152 /* CON5 on CP0 expansion */
159 clock-frequency = <100000>;
162 expander0: pca9555@21 {
163 compatible = "nxp,pca9555";
164 pinctrl-names = "default";
171 expander1: pca9555@25 {
172 compatible = "nxp,pca9555";
173 pinctrl-names = "default";
181 /* CON4 on CP0 expansion */
186 /* CON9 on CP0 expansion */
188 usb-phy = <&cpm_usb3_0_phy>;
192 /* CON10 on CP0 expansion */
194 usb-phy = <&cpm_usb3_1_phy>;
201 phy1: ethernet-phy@1 {
213 phy-mode = "rgmii-id";
216 /* CON5 on CP1 expansion */
223 clock-frequency = <100000>;
226 /* CON4 on CP1 expansion */
231 /* CON9 on CP1 expansion */
233 usb-phy = <&cps_usb3_0_phy>;
237 /* CON10 on CP1 expansion */
245 phy0: ethernet-phy@0 {
257 phy-mode = "rgmii-id";