arch/arm64/boot/dts/marvell/armada-3720-gl-mv1000.dts

   1 // SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
   2
   3 /dts-v1/;
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include "armada-372x.dtsi"
   7
   8 / {
   9         model = "GL.iNet GL-MV1000";
  10         compatible = "glinet,gl-mv1000", "marvell,armada3720";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         memory@0 {
  24                 device_type = "memory";
  25                 reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
  26         };
  27
  28         vcc_sd_reg1: regulator {
  29                 compatible = "regulator-gpio";
  30                 regulator-name = "vcc_sd1";
  31                 regulator-min-microvolt = <1800000>;
  32                 regulator-max-microvolt = <3300000>;
  33                 regulator-boot-on;
  34
  35                 gpios-states = <0>;
  36                 states = <1800000 0x1
  37                         3300000 0x0>;
  38                 enable-active-high;
  39         };
  40
  41         keys {
  42                 compatible = "gpio-keys";
  43
  44                 reset {
  45                         label = "reset";
  46                         linux,code = <KEY_RESTART>;
  47                         gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 switch {
  51                         label = "switch";
  52                         linux,code = <BTN_0>;
  53                         gpios = <&gpiosb 22 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56
  57         leds {
  58                 compatible = "gpio-leds";
  59
  60                 vpn {
  61                         label = "green:vpn";
  62                         gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wan {
  66                         label = "green:wan";
  67                         gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 led_power: power {
  71                         label = "green:power";
  72                         gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
  73                         default-state = "on";
  74                 };
  75         };
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         flash@0 {
  82                 reg = <0>;
  83                 compatible = "jedec,spi-nor";
  84                 spi-max-frequency = <104000000>;
  85                 m25p,fast-read;
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         partition@0 {
  92                                 label = "firmware";
  93                                 reg = <0 0xf0000>;
  94                         };
  95
  96                         partition@f0000 {
  97                                 label = "u-boot-env";
  98                                 reg = <0xf0000 0x8000>;
  99                         };
 100
 101                         factory: partition@f8000 {
 102                                 label = "factory";
 103                                 reg = <0xf8000 0x8000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@100000 {
 108                                 label = "dtb";
 109                                 reg = <0x100000 0x10000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@110000 {
 114                                 label = "rescue";
 115                                 reg = <0x110000 0x1000000>;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &sdhci1 {
 122         wp-inverted;
 123         bus-width = <4>;
 124         cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
 125         marvell,pad-type = "sd";
 126         no-1-8-v;
 127         vqmmc-supply = <&vcc_sd_reg1>;
 128         status = "okay";
 129 };
 130
 131 &sdhci0 {
 132         bus-width = <8>;
 133         mmc-ddr-1_8v;
 134         mmc-hs400-1_8v;
 135         non-removable;
 136         no-sd;
 137         no-sdio;
 138         marvell,pad-type = "fixed-1-8v";
 139         status = "okay";
 140 };
 141
 142 &usb3 {
 143         status = "okay";
 144 };
 145
 146 &usb2 {
 147         status = "okay";
 148 };
 149
 150 &uart0 {
 151         status = "okay";
 152 };
 153
 154 &mdio {
 155         switch0: switch0@1 {
 156                 compatible = "marvell,mv88e6085";
 157                 #address-cells = <1>;
 158                 #size-cells = <0>;
 159                 reg = <1>;
 160
 161                 dsa,member = <0 0>;
 162
 163                 ports: ports {
 164                         #address-cells = <1>;
 165                         #size-cells = <0>;
 166
 167                         port@0 {
 168                                 reg = <0>;
 169                                 label = "cpu";
 170                                 ethernet = <&eth0>;
 171                         };
 172
 173                         port@1 {
 174                                 reg = <1>;
 175                                 label = "wan";
 176                                 phy-handle = <&switch0phy0>;
 177                         };
 178
 179                         port@2 {
 180                                 reg = <2>;
 181                                 label = "lan0";
 182                                 phy-handle = <&switch0phy1>;
 183
 184                                 nvmem-cells = <&macaddr_factory_6>;
 185                                 nvmem-cell-names = "mac-address";
 186                         };
 187
 188                         port@3 {
 189                                 reg = <3>;
 190                                 label = "lan1";
 191                                 phy-handle = <&switch0phy2>;
 192
 193                                 nvmem-cells = <&macaddr_factory_6>;
 194                                 nvmem-cell-names = "mac-address";
 195                         };
 196                 };
 197
 198                 mdio {
 199                         #address-cells = <1>;
 200                         #size-cells = <0>;
 201
 202                         switch0phy0: switch0phy0@11 {
 203                                 reg = <0x11>;
 204                         };
 205                         switch0phy1: switch0phy1@12 {
 206                                 reg = <0x12>;
 207                         };
 208                         switch0phy2: switch0phy2@13 {
 209                                 reg = <0x13>;
 210                         };
 211                 };
 212         };
 213 };
 214
 215 &eth0 {
 216         nvmem-cells = <&macaddr_factory_0>;
 217         nvmem-cell-names = "mac-address";
 218         phy-mode = "rgmii-id";
 219         status = "okay";
 220
 221         fixed-link {
 222                 speed = <1000>;
 223                 full-duplex;
 224         };
 225 };
 226
 227 &factory {
 228         compatible = "nvmem-cells";
 229         #address-cells = <1>;
 230         #size-cells = <1>;
 231
 232         macaddr_factory_0: macaddr@0 {
 233                 reg = <0x0 0x6>;
 234         };
 235
 236         macaddr_factory_6: macaddr@6 {
 237                 reg = <0x6 0x6>;
 238         };
 239 };